I am working on an application in android. Where I need to use menu through out application. Actually it will be used for navigating within application from one activity to other and so on... I am wondering that it will need to write onOptionMenuCreat and OnOptionMenuSelect methods in each activity. Also if I make one parent activity where these two methods could be written even then on each activity Option Menu will be created again. So handling same menu while it is created again is becoming work of afaik. Any good design suggestions are most welcomed. Another very important thing how to map that user was on witch activity last time while selecting same menu again. My app has total five menu options so that means there are five different ways to move within application simultaneously.
Please Do tell me solution for both issues. Thank You.
You create the Menu in an Activity and inherit all the other Activities from this Activity.
To answer the second part.
create a different method for each menu handling in the parent activity. If you need a different menu/menu_item behaviour for your activity, just override that method.
Related
I have seen a few questions raised on this topic (for e.g.: https://github.com/jfeinstein10/SlidingMenu/issues/5) but I am still unclear. I hope somebody can clarify this.
Context:
See https://github.com/jfeinstein10/SlidingMenu
I have an android app that organizes screens by activities and fragments (i.e.) each screen is an activity containing one or more fragments.
The new requirement is to add a sliding menu (similar to what this library provides).
Issue:
It appears from the examples and discussion that the right model would be to have just 1 MAIN ACTIVITY that will then switch in/out fragments belonging to the different screens. In fact the author mentions in the above thread: "If you were to launch Activities based upon the list selection, then you would not have the behavior where you swap the views that you're talking about. " and also "You can't put an Activity into the above view. That doesn't really make sense when you think about what an Activity is. ".
Why doesn't it make sense? Obviously, I am missing the point here.
Question:
Given that my project already contains multiple activities (one corresponding to each screen), is my only option then to re-organize the project to have JUST 1 MAIN ACTIVITY, in order to use this library? Or alternatively, is there any way to launch a new activity when a list item in the sliding menu is clicked, and still observe the sliding menu behavior, [EDIT- added the last part to be more clear] or in other words, on how exactly to use this library within my existing app design.
Thanks in advance
First, you can't have an Activity inside another and activities are completely different from views as stated in the docs:
An activity is a single, focused thing that the user can do.
Now, to answer your question, it all depends on how you want your app to behave. You could have your activities with the sliding menu implement the onClosedListener and switch to the selected activity from there. This will give you the animation of closing the menu before switching activities. It will also give you a weird effect since every time you select something from your menu you'll see the animation of a new activity coming to the front.
I think the best approach would be to have a "common purpose" between all your sliding menu options. For example, in one of my projects I have to allow the users to select between lists of different types of data. When the user selects anything from the menu, I load a new list fragment into the right corner where he may choose the item he wants to view or edit. That's the app entry point and also the only place were I have a sliding menu in my app. It is pretty much the same for every app that implements this UI design pattern. Look at google+, currents and youtube where the side menu lets you choose which feed or content to show. Once a user makes a selection, just open a new activity for the selected item (a g+ post, a video, a news article, a tweet or whatever it is).
Your app doesn't have to have lists of different data or anything like that to use the sliding menu, but keep in mind that the activity with the sliding menu should have a clear, focused goal with respect to its functionality and purpose. Having a sliding menu because many other apps have one is a bad choice, you should use it with a specific objective. Also keep in mind that applying the sliding menu everywhere would interfere with the platform's navigation pattern and lead to an overall bad user experience since it wouldn't behave as the other apps.
It doesn't make sense to place an Activity into the above view because the Activity is the main controller for the view of each screen. The Activity also shows views and keeps track of Fragments (which in turn are mini controllers, with or without their own views). So placing an Activity in the above view would mean that you would place an Activity in an Activity... Wich is impossible.
From what I can derive from your text I think it would be wise to read through the Android developer guide on Activities and Fragment again (http://developer.android.com/guide/components/activities.html) to get a better understanding of how the concept of Android works.
Now to your question:
I am not clear on what you are trying to achieve but if you want your app, with menu to behave like, say, the Google+ app then one way of doing it is to implement a base class that extends the Activity class (or what ever base Activity used in your project) and let the base set the SlidingMenu. Then you would simple extend your base Activity in each of the Activities that are supposed to have a menu.
You could also do it the way you describe it, but then you would end up with a classic example of a God object (http://en.wikipedia.org/wiki/God_object). It's a neat way to practice your Fragment juggling skills and switching between Fragments instead of starting new Activities does have it's use cases, but I still wouldn't recommend it for a project with more then a few views.
Here is the answer that came closest to the issue I had - http://www.verious.com/article/polishing-the-sliding-app-menu/. Scroll down to the bottom of the page to see the last section titled "Using the fly-in app menu between Activities". This is one option if you have a lot of activities in your existing app and want to avoid extensive re-factoring. I haven't tried this out yet but its worth being aware of.
There are many implementations of facebook app-like sliding menu, which are mentioned in that question.
Some of them, which implementation I checked, are using one activity for showing menu and data. When user selects item from menu no new activity is start. Thus, one activity is using for many part of the program, showing different data in one view.
IMHO, it could be messy to use one activity for all. So, I'm thinking of new plan:
Add menu to all activities;
When user select item in menu, close(pop/hide) current activity and start (push/show) activity, which is related to selected item.
Any ideas to implement such behavior?
I'm way to lazy to read through all those answers in the mentioned thread and check all provided libraries.
A good sliding menu library which works properly with Fragments is SlidingMenu
Also you should take a look at the documentation on Activities, Intents (the flags you can set to them) and how their life cycles are managed cause you seem to mix up some things.
in my app I've launcher activity displaying summaries of different stuff. There's one SlidingDrawer set up in each activity having a dashboard with 9 menus as content. When user clicks on drawer's handle, content scrolls up to display that dashboard. These menu launch 9 activities from dashboard and there are no of activities that will be having same SlidingDrawer with dashboard.
Now the thing which is disturbing me is, I'm forced to put same code blocks in each activity that controls behaviour of dashboard. Dashboard itself is inflated from single layout. So design is not issue. But I've to attach event handlers to each button and start new activities from there. Problem is whenever I make changes I need to replicate those changes in all activities.
How can I avoid such redundant code and use a single class or something that let me define launching of those 9 activities?
Sorry for title and description. It's really hard for me to put it in words. If you find title or description not suitable then tell me or edit where appropriate.
Thanks.
This might be a perfect situation for an Android Fragment
Have two fragments for each activity, one for the sliding drawer and one for everything else.
Android fragments seem complex at first, but trust me, learning them will make your life easier.
I am wondering if it is possible to keep my application's option menu available even when the application calls an intent which brings up the contact list? I would like my settings option to be available everywhere within the application.
You menu will only be available in your app , other apps cant use it. To make sure every activity has a menu create the menu in a base Activity Class and make all your activities extent it.
You can have the same menu show on every activity simply by inflating it in each activity. It will be even more clean if you subclass Activity and give it this functionality.
This question actually has two parts.
The first part:
I've been developing my first app for a couple of weeks now. I have 5 screens and everything seems well. However, I'm considering changing the app's navigation to a TabView.
I haven't delved much into it, but I'm hoping someone can save me a little bit of time. It seems that people don't generally place Activities inside each tab. They simply point the tab content to a View. This is where my major setbacks are. 1) I already have Activity classes full of code and 2) I can't quickly guess how the structure of an app using TabView looks. For example, where do I put the handler code for clicking a button on a View? Does it all just get dumped into the TabView Activity somehow?
What I would like is if you could please give me a quick synopsis of what I'm looking at doing, answers to any questions you think I may have, and point me toward some resources for creating TabView applications. A quick Google search really just shows me how to create a TabView Activity and add a couple tabs to it. The code doesn't go any deeper. For example, say I have a layout xml to show in one of my tab's content pane, where does the code go for clicking a button I have in that layout?
The second part:
I've added a TabActivity to wrap the Activities I currently have in. At the moment I have Activities populating the content of my tabs (though ultimately I'd like to do this in the most efficient fashion, which doesn't seem to be having Activities be tab content). I've noticed something rather annoying. My MAIN Activity is an Activity I wrote for my user to log in to their account. After logging in, they are taken to my Tab Activity. Here is what happens:
When I am on my Tab Activity and I "minimize" the app by clicking the Home button and then launch it again, I don't get taken back to the Tab Activity. I get taken to my log in Activity. Why? I don't have the launchMode of my Tab Activity set to singleInstance... or is it singleInstance by default? How can I make the app re-launch showing the Tab Activity (ideally by setting some parameter, assuming I'm doing something wrong, and not having to save this data off somewhere and reading it and programmatically telling it what to go to)?
Thank you for all your time and help
I don't have a comment on the advisability avoiding the use of sub-activities in TabActivity. As for handlers -- if you aren't going to embed views instead of activities, then all the android:onclick type handler settings in your layout XML will call methods on the TabActivity. This is because they go to methods on the views' Context, which is the generally the nearest containing Activity. If you want to split your code up further without using Activities, I believe you'll have to use findViewById calls on the tab content views after you've set them up, and bind the handlers manually from there in your code.