What I want to do is the following:
I have 4 tabs in total, but in 1 tab i want to have multiple screens which the user can change using the menu
I can capture the event of when the user presses the right button, so no help needed there:)
what I can't do is starting the Activity without removing the TabBar!
I found some information about changing the view of the framelayout, but i really want to start another activity in the layout, not just change the view (I want to keep my code clean you see;)
thanks in advance
so in Tab A I want to be able to use Activity A and B
The only solution I found is still replacing the view, but doing it through ActivityGroup, so the code would still look normally and would be separated in activities. Works great, but there still is needs for hacks like back button press and stuff.
Scrapped this idea, though, since later I wanted more flexible and more stylish tab bar, so I wrote my own. Works like a charm and took some 2 working days to code.
Related
How do I make an Android activity like the one shown in this image.
I am asking specifically about how to make a component such as the repeat and reminder components. And also, the two tabs showing Add Event and Add Task.
I'd also like to know the name by which they are referred.
Touching Repeat, a list dialog box appears. Touching Reminder, different times can be set which can be removed by a minus sign (-) which appears beside them. The tabs cannot be slid, but they need to be clicked to go to a particular tab.
It looks like it's just a listview on top of a tabbed activity.
When you create a new Activity, you can just specify tabbed activity and Android studio takes care of creating the tabs.
Then for the items, you just use listview, unless it'll turn out to be a really long list, then a recyclerview is recommended.
Hope that helps (:
in my app I've launcher activity displaying summaries of different stuff. There's one SlidingDrawer set up in each activity having a dashboard with 9 menus as content. When user clicks on drawer's handle, content scrolls up to display that dashboard. These menu launch 9 activities from dashboard and there are no of activities that will be having same SlidingDrawer with dashboard.
Now the thing which is disturbing me is, I'm forced to put same code blocks in each activity that controls behaviour of dashboard. Dashboard itself is inflated from single layout. So design is not issue. But I've to attach event handlers to each button and start new activities from there. Problem is whenever I make changes I need to replicate those changes in all activities.
How can I avoid such redundant code and use a single class or something that let me define launching of those 9 activities?
Sorry for title and description. It's really hard for me to put it in words. If you find title or description not suitable then tell me or edit where appropriate.
Thanks.
This might be a perfect situation for an Android Fragment
Have two fragments for each activity, one for the sliding drawer and one for everything else.
Android fragments seem complex at first, but trust me, learning them will make your life easier.
I'm looking for the the best way to reproduce, in an Android app, the behavior of the iPhone UiNavigationController within an UITabBarController.
I'm working on this Android app where I have a TabActivity and 4 tabs. I've already gone through a lot of posts regarding the use of activities and tabs and how it's not a good idea to use activities for everything, which seems fair enough. I decided to use one Activity on each tab anyway, since it makes sense in my application.
However, in one of those activities I have a deep navigation tree with more than one branch and up to 12 different views the user can go through.
The problem is: Android controls the navigation through activities inside an app, if you click the back button it will go to the previous one, but if I'm navigating through views, using one Activity, and I click back, it just finishes it. So how can I have a smooth navigation behavior between views in an Activity?
I had implemented this using a TabActivity with FragmentActivity as each tab. Utilizing Fragments API you can organize the code just like you would be using 12 different activities, still using only 1 for each tab in fact. Fragment's framework will handle back key press for you to show previous fragment instead of closing the entire activity.
There are some problems with such approach, for example, there's no MapFragment, but the workarounds can be found here on SOF.
You will need Android Support Package if your minimum SDK version is lower than 3.0.
Well I know very little about UiNavigationViewController, but I guess you want something to navigate between different Views. As you are using TabActivity, every tab should load into a separate Activity.
But since you want to branch it out, using that many Activities is not a perfect solution, neither the ActivityGroup too. The better solution, as per my opinion(I have run into similar problem once) is to have the main or root tabs loads into separate Activity, but for their branches, use the ViewFlipper, which flips the Views. So the whole Layout(Subclass of View) can be flipped.
You may run into some problem while flipping more than two Views (as what people say, though I never had any problem). So in that case you can use layout.setVisibility(View.GONE) to hide the layout and just change it with View.VISIBLE for next view.
And about the concerns of back button, you need to store the last used View or Activity into a variable, and in the override of onBackPressed(), just need to call them.
There might be better solution than this, not that I can remember, but yeah it's the easiest solution I can come up with.
Sorry, I know that this topic has been covered a bit. I've read the related posts and am still a bit confused. I am working on an app that while the prototype will have 3 main screens, it will eventually have dozens. Each screen will present either dynmically changing status or take user input. To visualize, it is required to be laid out similar to how MS Word or a typical PC is. It has a status bar at the top and a navigation bar at the bottom that is common to all screens (slight tweaks for some screens, like different icons) in the middle is what I would call a view pane that needs to be updated with a applicable layout.
The status, nav bar, and each screen are defined in their own layout xml file. For my first swag at it I just used a ViewFlipper and loaded the 3 screen layouts into it. However that means that currently I have one main Activity which will not be maintainable as I continue to add screens.
It feels right to me that each screen layout should have an associated Activity class that understands how to control that screen. I need to figure out how to load that into the center pane dynamically. However I thought I read in another post that using multiple Activities can be a CPU and RAM drain.
Currently I tried making one of the screens it's own Activity and kick that off from the main Activity by creating an Intent and than calling startActivity. However that causes the new screen Activity to reside on top of the main Activity. The interesting thing is that then pressing the back button dismissed that activity and returns me to the main.
So far I haven't figured out how to setup having a different Activity control what happens in the center pane.
If I continue down the multiple Activity path, should my main Activity be inheriting from ActivityGroup?
Are using View classes more applicable in this case?
I know this has been a long post. I'd appreciate any advice.
Thanks!
CB
As you noticed, Android will implicitly track a stack of started activities in a task, and the 'back' button ends the top one, reactivating the next one down. I would advise you to think about which kinds of things the user might expect the back button to do, and make it so that activities are separated along those lines.
I haven't played with ActivityGroup so I can't advise you there. If you go with completely separate activities, you can have them all use the same "shell" content view with the common nav/status bar. Have a superclass or utility class handle populating and managing that from there. Then use a a LayoutInflater (you can call getLayoutInflater()) to fill in the middle with your Activity-specific view.
If you want one of the activities to have multiple screens, you might still end up with a ViewFlipper in the center slot. Again, you want to have an Activity transition wherever you want the user to be able to go "back"; that also means you may NOT want to have a change of activities in cases where screens are closely related or part of the same logical thing-being-done. (You can override the back button's behavior, but unless you have a good reason to, it's best to just arrange the app so that Android's basic setup helps your app's UI rather than working at cross purposes.)
If you want to use activities in the fashion you talked about, you might look into using a tab activity. It actually works in the way you want, you just need to hide the tab widget and put your navigation bar there instead. Or, you could go a little deeper and make you own similar tab-like ActivityGroup like Walter mentioned if you have more time.
You could use a view pager with fragments to accomplish the flip between the different views but still allow your activity to have full control over it. The activity can control the menus while the fragment controls your viewing area. This way your back button will properly dismiss the activity containing all pages related to the activity instead of walking down the stack.
This question actually has two parts.
The first part:
I've been developing my first app for a couple of weeks now. I have 5 screens and everything seems well. However, I'm considering changing the app's navigation to a TabView.
I haven't delved much into it, but I'm hoping someone can save me a little bit of time. It seems that people don't generally place Activities inside each tab. They simply point the tab content to a View. This is where my major setbacks are. 1) I already have Activity classes full of code and 2) I can't quickly guess how the structure of an app using TabView looks. For example, where do I put the handler code for clicking a button on a View? Does it all just get dumped into the TabView Activity somehow?
What I would like is if you could please give me a quick synopsis of what I'm looking at doing, answers to any questions you think I may have, and point me toward some resources for creating TabView applications. A quick Google search really just shows me how to create a TabView Activity and add a couple tabs to it. The code doesn't go any deeper. For example, say I have a layout xml to show in one of my tab's content pane, where does the code go for clicking a button I have in that layout?
The second part:
I've added a TabActivity to wrap the Activities I currently have in. At the moment I have Activities populating the content of my tabs (though ultimately I'd like to do this in the most efficient fashion, which doesn't seem to be having Activities be tab content). I've noticed something rather annoying. My MAIN Activity is an Activity I wrote for my user to log in to their account. After logging in, they are taken to my Tab Activity. Here is what happens:
When I am on my Tab Activity and I "minimize" the app by clicking the Home button and then launch it again, I don't get taken back to the Tab Activity. I get taken to my log in Activity. Why? I don't have the launchMode of my Tab Activity set to singleInstance... or is it singleInstance by default? How can I make the app re-launch showing the Tab Activity (ideally by setting some parameter, assuming I'm doing something wrong, and not having to save this data off somewhere and reading it and programmatically telling it what to go to)?
Thank you for all your time and help
I don't have a comment on the advisability avoiding the use of sub-activities in TabActivity. As for handlers -- if you aren't going to embed views instead of activities, then all the android:onclick type handler settings in your layout XML will call methods on the TabActivity. This is because they go to methods on the views' Context, which is the generally the nearest containing Activity. If you want to split your code up further without using Activities, I believe you'll have to use findViewById calls on the tab content views after you've set them up, and bind the handlers manually from there in your code.