Develop Reference

Android calculating Velocity wtih Accelerometer data

Due to the power consuming GPS data, I would like to calculate the device speed with only the accelerometer x,y and z data. I have read a lot of questions about this topic and I tried many set-ups to find a satisfactory solution to calculate the speed when my device is in my car.
It seems so simple but nothing works, which drives me crazy.
Been trying the Sensor.TYPE_LINEAR_ACCELERATION and the Sensor.TYPE_ACCELEROMETER with removed gravity. Tried a Low Pass Filter on the Linear acceleration data. Unfortunately all with no succes.
Looks like the calculated speed is correct but testing in my car the calculated speed doesn't get higher then about 2 m/s.
below a code snip
mAccelerometer = mSensorManager.getDefaultSensor(Sensor.TYPE_LINEAR_ACCELERATION);
public void onSensorChanged(SensorEvent event) {
if (event.sensor == mAccelerometer) {
if (timestamp != 0) {
final float dT = (event.timestamp - timestamp) * NS2S;
lax = event.values[0];
lay = event.values[1];
laz = event.values[2];
vx = vxo + lax * dT ;
vy = vyo + lay * dT ;
vz = vzo + laz * dT ;
speed = (float) (Math.sqrt(vx*vx + vy*vy + vz*vz)) ;
if (speed < 0.01) {speed = 0 ; }
tv_speed.setText(String.valueOf(speed));
}
timestamp = event.timestamp;
}
}
Hope someone can help, thanks a lot.

It's possible to compute distance and speed using only accelerometer, but with three conditions:
1. Linear movement - trajectory must be straight.
2. Slope of the road must be constant.
3. You must perform calibration procedure before start.
Where can you use this method with such restrictions - it's up to you... Now, how to do it:
We need something, implementing SensorEventListener interface. For the future use, let's add following abstract class:
public abstract class Accelerometer implements SensorEventListener {
protected float lastX;
protected float lastY;
protected float lastZ;
public abstract Point getPoint();
public void onAccuracyChanged(Sensor arg0, int arg1) {
}
}
and this will be our SensorEventListener:
public class XYZAccelerometer extends Accelerometer {
private static final int BUFFER_SIZE = 500;
// calibration
private float dX = 0;
private float dY = 0;
private float dZ = 0;
// buffer variables
private float X;
private float Y;
private float Z;
private int cnt = 0;
// returns last SenorEvent parameters
public Point getLastPoint(){
return new Point(lastX, lastY, lastZ, 1);
}
// returrns parameters, using buffer: average acceleration
// since last call of getPoint().
public Point getPoint(){
if (cnt == 0){
return new Point(lastX, lastY, lastZ, 1);
}
Point p = new Point(X, Y, Z, cnt);
reset();
return p;
}
// resets buffer
public void reset(){
cnt = 0;
X = 0;
Y = 0;
Z = 0;
}
public void onSensorChanged(SensorEvent se) {
float x = se.values[SensorManager.DATA_X] + dX;
float y = se.values[SensorManager.DATA_Y] + dY;
float z = se.values[SensorManager.DATA_Z] + dZ;
lastX = x;
lastY = y;
lastZ = z;
X+= x;
Y+= y;
Z+= z;
if (cnt < BUFFER_SIZE-1) {
cnt++;
} else
{
reset();
}
}
public int getCnt(){
return cnt;
}
public void setdX(float dX) {
this.dX = dX;
}
public void setdY(float dY) {
this.dY = dY;
}
public void setdZ(float dZ) {
this.dZ = dZ;
}
}
Calibrating accelerometer must be called before each experiment. Phone orientation must not be changed while measuring.
To calibrate accelerometer, i use this class:
public class Calibrator {
final static int UPDATE_INTERVAL = 400;
final static int ITERATIONS = 5;
Handler hRefresh;
XYZAccelerometer acc;
int eventNumber;
private LinkedList calData;
public Calibrator(Handler hRefresh, XYZAccelerometer acc, int eventNumber) {
this.hRefresh = hRefresh;
this.acc = acc;
this.eventNumber = eventNumber;
}
public void calibrate() {
final Timer calTimer = new Timer();
calData = new LinkedList();
acc.setdX(0);
acc.setdY(0);
acc.setdZ(0);
calTimer.scheduleAtFixedRate(
new TimerTask() {
public void run() {
addCalData(calData);
if (calData.size() > ITERATIONS) {
calTimer.cancel();
try {
calSensor(calData);
} catch (Exception ex) {
try {
throw ex;
} catch (Exception ex1) {
hRefresh.sendEmptyMessage(5);
}
}
hRefresh.sendEmptyMessage(eventNumber);
}
}
},
0,
UPDATE_INTERVAL);
}
private void addCalData(LinkedList cD) {
Point p = acc.getPoint();
cD.add(p);
acc.reset();
}
private void calSensor(LinkedList cD) throws Exception {
if (cD.size() < ITERATIONS-1) {
throw new Exception("not enough data to calibrate");
}
float x = 0;
float y = 0;
float z = 0;
// Don't use first measure
for (int i = 1; i < cD.size(); ++i) {
x += cD.get(i).getX();
y += cD.get(i).getY();
z += cD.get(i).getZ();
}
x = x / (cD.size() - 1);
y = y / (cD.size() - 1);
z = z / (cD.size() - 1);
acc.setdX(-x);
acc.setdY(-y);
acc.setdZ(-z);
}
}
maintenance class to keep data of one measure
public class Point {
private float x = 0;
private float y = 0;
private float z = 0;
private int cnt = 1;
public float getX() {
return x/(float)cnt;
}
public float getY() {
return y/(float)cnt;
}
public float getZ() {
return z/(float)cnt;
}
public Point(float x, float y, float z, int cnt) {
this.x = x;
this.y = y;
this.z = z;
this.cnt = cnt;
}
public float getForce(){
return getX()*getX()+getY()*getY()+getZ()*getZ();
}
}
And class to process data of measure
public class MeasurePoint {
private float x;
private float y;
private float z;
private float speedBefore;
private float speedAfter;
private float distance;
private float acceleration;
private long interval;
private Point averagePoint;
public MeasurePoint(float x, float y, float z, float speedBefore, long interval, Point averagePoint) {
this.x = x;
this.y = y;
this.z = z;
this.speedBefore = speedBefore;
this.interval = interval;
this.averagePoint = averagePoint;
speedAfter = 0;
calc();
}
private void calc(){
//Acceleration as projection of current vector on average
acceleration = this.x*averagePoint.getX() +
this.y*averagePoint.getY() +
this.z*averagePoint.getZ();
acceleration = acceleration / ((float)Math.sqrt(averagePoint.getForce()));
float t = ((float)interval / 1000f);
speedAfter = speedBefore + acceleration * t;
distance = speedBefore*t + acceleration*t*t/2;
}
public String getStoreString(){
String s = "write here whatever you want";
return s;
}
// add getters
}
This one - to store and save data array
public class MeasureData {
// points from accelerometr
private LinkedList accData;
private LinkedList data;
// timer interval of generating points
private long interval;
public MeasureData(long interval) {
this.interval = interval;
accData = new LinkedList ();
data = new LinkedList ();
}
public void addPoint(Point p){
accData.add(p);
}
public void process(){
for(int i = 0; i < accData.size(); ++i){
Point p = accData.get(i);
float speed = 0;
if(i > 0){
speed = data.get(i-1).getSpeedAfter();
}
data.add(new MeasurePoint(p.getX(), p.getY(), p.getZ(), speed, interval, getAveragePoint()));
}
}
public boolean saveExt(Context con, String fname) throws Throwable {
try {
File file = new File(con.getExternalFilesDir(null), fname);
FileOutputStream os = new FileOutputStream(file);
OutputStreamWriter out = new OutputStreamWriter(os);
for (int i = 0; i < data.size(); ++i) {
MeasurePoint m = data.get(i);
out.write(m.getStoreString());
}
out.close();
} catch (Throwable t) {
throw (t);
}
return true;
}
private Point getAveragePoint() {
float x = 0;
float y = 0;
float z = 0;
for(int i = 0; i < accData.size(); ++i){
Point p = accData.get(i);
x += p.getX();
y += p.getY();
z += p.getZ();
}
return new Point(x, y, z, 1);
}
public float getLastSpeed(){
return data.getLast().getSpeedAfter();
}
public float getLastSpeedKm(){
float ms = getLastSpeed();
return ms*3.6f;
}
}
And, finally, how to use all this in your activity(I cleaned it up a lot, sorry if it will not complie - fill free to write it in comments:
public class TestActivity extends Activity {
static final int TIMER_DONE = 2;
static final int START = 3;
static final int CAL_TIMER_DONE = 4;
static final int ERROR = 5;
private StartCatcher mStartListener;
private XYZAccelerometer xyzAcc;
private SensorManager mSensorManager;
private static final long UPDATE_INTERVAL = 500;
private static final long MEASURE_TIMES = 20;
private Timer timer;
private TextView tv;
private Button testBtn;
int counter;
private MeasureData mdXYZ;
/** handler for async events*/
Handler hRefresh = new Handler() {
#Override
public void handleMessage(Message msg) {
switch (msg.what) {
case TIMER_DONE:
onMeasureDone();
String es1 = Float.toString(Math.round(mdXYZ.getLastSpeedKm()*100)/100f);
tv.append(" END SPEED " + es1 + " " + es2 + " \n");
enableButtons();
break;
case START:
tv.append(" START");
timer = new Timer();
timer.scheduleAtFixedRate(
new TimerTask() {
public void run() {
dumpSensor();
}
},
0,
UPDATE_INTERVAL);
break;
case ERROR:
Toast.makeText(getApplicationContext(), "ERROR", Toast.LENGTH_SHORT).show();
break;
}
}
};
/** Called when the activity is first created. */
#Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.main);
tv = (TextView) findViewById(R.id.txt);
testBtn = (Button) findViewById(R.id.btn);
}
#Override
protected void onResume() {
super.onResume();
tv.append("\n ..");
mSensorManager = (SensorManager) getSystemService(Context.SENSOR_SERVICE);
setAccelerometer();
setStartCatcher();
mSensorManager.registerListener(xyzAcc,
mSensorManager.getDefaultSensor(Sensor.TYPE_ACCELEROMETER),
SensorManager.SENSOR_DELAY_GAME);
}
#Override
protected void onPause() {
mSensorManager.unregisterListener(xyzAcc);
super.onPause();
}
public void onButtonTest(View v) {
disableButtons();
mdXYZ = new MeasureData(UPDATE_INTERVAL);
counter = 0;
tv.setText("");
tv.append("Calibrating");
Calibrator cal = new Calibrator(hRefresh, xyzAcc, START);
cal.calibrate();
}
void dumpSensor() {
++counter;
mdXYZ.addPoint(xyzAcc.getPoint());
hRefresh.sendEmptyMessage(TICK);
if (counter > MEASURE_TIMES) {
timer.cancel();
hRefresh.sendEmptyMessage(TIMER_DONE);
}
}
private void enableButtons() {
testBtn.setEnabled(true);
}
private void setAccelerometer() {
xyzAcc = new XYZAccelerometer();
mSensorManager.registerListener(xyzAcc,
mSensorManager.getDefaultSensor(Sensor.TYPE_ACCELEROMETER),
SensorManager.SENSOR_DELAY_UI);
}
private void disableButtons() {
testBtn.setEnabled(false);
}
private void onMeasureDone() {
try {
mdXYZ.process();
long now = System.currentTimeMillis();
mdXYZ.saveExt(this, Long.toString(now) + ".csv");
} catch (Throwable ex) {
Toast.makeText(this, ex.getMessage().toString(), Toast.LENGTH_SHORT);
}
}
}
<serviceLinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:orientation="vertical"
android:layout_width="fill_parent"
android:layout_height="fill_parent"
>
<serviceButton
android:id="#+id/btn"
android:text="TEST"
android:layout_width="300px"
android:layout_height="200px"
android:onClick="onButtonTest" />
<serviceTextView
android:id = "#+id/txt"
android:layout_width="fill_parent"
android:layout_height="wrap_content"
android:text=":"
/>
<service/LinearLayout>

Although at the developer.android.com site it is stated clearly that
you could use the linear accelerometer to see how fast your car is going"
But I did not find anything (in testing or in examples or code) that showed this is really true.
Now, unfortunately, I am convinced that it is not possible to calculate the speed of a car with the linear accelerometer.

Please see the below code to get the velocity using accelerometer
public class SensorTestActivity extends Activity implements SensorEventListener {
double calibration = Double.NaN;
private SensorManager sensorManager;
private boolean color = false;
private TextView view;
private long lastUpdate;
float appliedAcceleration = 0;
float currentAcceleration = 0;
float velocity = 0;
Date lastUpdatedate;
/** Called when the activity is first created. */
#Override
public void onCreate(Bundle savedInstanceState) {
requestWindowFeature(Window.FEATURE_NO_TITLE);
getWindow().setFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN,
WindowManager.LayoutParams.FLAG_FULLSCREEN);
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main2);
view = findViewById(R.id.textView);
// view.setBackgroundColor(Color.GREEN);
lastUpdatedate = new Date(System.currentTimeMillis());
sensorManager = (SensorManager) getSystemService(SENSOR_SERVICE);
lastUpdate = System.currentTimeMillis();
}
#Override
public void onSensorChanged(SensorEvent event) {
// if (event.sensor.getType() == Sensor.TYPE_ACCELEROMETER) {
// getAccelerometer(event);
// }
double x = event.values[0];
double y = event.values[1];
double z = event.values[2];
double a = Math.sqrt(Math.pow(x, 2) + Math.pow(y, 2) + Math.pow(z, 2));
if (calibration == Double.NaN)
calibration = a;
else {
updateVelocity();
currentAcceleration = (float)a;
}
}
private void getAccelerometer(SensorEvent event) {
float[] values = event.values;
// Movement
float x = values[0];
float y = values[1];
float z = values[2];
float accelationSquareRoot = (x * x + y * y + z * z)
/ (SensorManager.GRAVITY_EARTH * SensorManager.GRAVITY_EARTH);
long actualTime = event.timestamp;
if (accelationSquareRoot >= 2) //
{
if (actualTime - lastUpdate < 200) {
return;
}
lastUpdate = actualTime;
// Toast.makeText(this, "Device was shuffed", Toast.LENGTH_SHORT)
// .show();
if (color) {
view.setBackgroundColor(Color.GREEN);
} else {
view.setBackgroundColor(Color.RED);
}
color = !color;
view.setText("SPEEDDDDD=== "+accelationSquareRoot);
// Log.i("SensorTestActivity","SPEEDDDDD=== "+accelationSquareRoot+" ");
}
}
private void updateVelocity() {
// Calculate how long this acceleration has been applied.
Date timeNow = new Date(System.currentTimeMillis());
long timeDelta = timeNow.getTime()-lastUpdatedate.getTime();
lastUpdatedate.setTime(timeNow.getTime());
// Calculate the change in velocity at the
// current acceleration since the last update.
float deltaVelocity = appliedAcceleration * (timeDelta/1000);
appliedAcceleration = currentAcceleration;
// Add the velocity change to the current velocity.
velocity += deltaVelocity;
final double mph = (Math.round(100*velocity / 1.6 * 3.6))/100;
Log.i("SensorTestActivity","SPEEDDDDD=== "+mph+" "+velocity);
}
#Override
public void onAccuracyChanged(Sensor sensor, int accuracy) {
}
#Override
protected void onResume() {
super.onResume();
// register this class as a listener for the orientation and
// accelerometer sensors
sensorManager.registerListener(this,
sensorManager.getDefaultSensor(Sensor.TYPE_ACCELEROMETER),
SensorManager.SENSOR_DELAY_NORMAL);
}
#Override
protected void onPause() {
// unregister listener
super.onPause();
sensorManager.unregisterListener(this);
}
}

Save current time stamp in shared preference

I want to make an app,And I am new in android.
I have 10 pictures.
When I shake my phone I want to show each day one of these pictures in random method.
I write the shake code and show randomly this pictures,but I cant show one of them each day.
Can you help me how is the code of shared preference?
public class MainAccelerometer extends Activity implements AccelerometerListener{
ImageView favorit;
ImageView img;
#TargetApi(Build.VERSION_CODES.HONEYCOMB)
#Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.main);
favorit = (ImageView)findViewById(R.id.favorit);
img = (ImageView)findViewById(R.id.img);
// Check onResume Method to start accelerometer listener
}
public void onAccelerationChanged(float x, float y, float z) {
// TODO Auto-generated method stub
}
public void onShake(float force) {
Random rand = new Random();
int rndInt = rand.nextInt(10) + 1; // n = the number of images, that start at idx 1
String imgName = "img" + rndInt;
int id = getResources().getIdentifier(imgName, "drawable", getPackageName());
img.setImageResource(id);
// Do your stuff here
// Called when Motion Detected
Toast.makeText(getBaseContext(), "shake",
Toast.LENGTH_SHORT).show();
favorit.setBackgroundResource(R.drawable.img2);
}
#Override
public void onResume() {
super.onResume();
Toast.makeText(getBaseContext(), "onResume Accelerometer Started",
Toast.LENGTH_SHORT).show();
//Check device supported Accelerometer senssor or not
if (AccelerometerManager.isSupported(this)) {
//Start Accelerometer Listening
AccelerometerManager.startListening(this);
}
}
#Override
public void onStop() {
super.onStop();
//Check device supported Accelerometer senssor or not
if (AccelerometerManager.isListening()) {
//Start Accelerometer Listening
AccelerometerManager.stopListening();
Toast.makeText(getBaseContext(), "onStop Accelerometer Stoped",
Toast.LENGTH_SHORT).show();
}
}
#Override
public void onDestroy() {
super.onDestroy();
Log.i("Sensor", "Service distroy");
//Check device supported Accelerometer senssor or not
if (AccelerometerManager.isListening()) {
//Start Accelerometer Listening
AccelerometerManager.stopListening();
Toast.makeText(getBaseContext(), "onDestroy Accelerometer Stoped",
Toast.LENGTH_SHORT).show();
}
}}
and other class
public class AccelerometerManager {
private static Context aContext=null;
/** Accuracy configuration */
private static float threshold = 15.0f;
private static int interval = 200;
private static Sensor sensor;
private static SensorManager sensorManager;
// you could use an OrientationListener array instead
// if you plans to use more than one listener
private static AccelerometerListener listener;
/** indicates whether or not Accelerometer Sensor is supported */
private static Boolean supported;
/** indicates whether or not Accelerometer Sensor is running */
private static boolean running = false;
/**
* Returns true if the manager is listening to orientation changes
*/
public static boolean isListening() {
return running;
}
/**
* Unregisters listeners
*/
public static void stopListening() {
running = false;
try {
if (sensorManager != null && sensorEventListener != null) {
sensorManager.unregisterListener(sensorEventListener);
}
} catch (Exception e) {}
}
/**
* Returns true if at least one Accelerometer sensor is available
*/
public static boolean isSupported(Context context) {
aContext = context;
if (supported == null) {
if (aContext != null) {
sensorManager = (SensorManager) aContext.
getSystemService(Context.SENSOR_SERVICE);
// Get all sensors in device
List<Sensor> sensors = sensorManager.getSensorList(
Sensor.TYPE_ACCELEROMETER);
supported = new Boolean(sensors.size() > 0);
} else {
supported = Boolean.FALSE;
}
}
return supported;
}
/**
* Configure the listener for shaking
* #param threshold
* minimum acceleration variation for considering shaking
* #param interval
* minimum interval between to shake events
*/
public static void configure(int threshold, int interval) {
AccelerometerManager.threshold = threshold;
AccelerometerManager.interval = interval;
}
/**
* Registers a listener and start listening
* #param accelerometerListener
* callback for accelerometer events
*/
public static void startListening( AccelerometerListener accelerometerListener )
{
sensorManager = (SensorManager) aContext.
getSystemService(Context.SENSOR_SERVICE);
// Take all sensors in device
List<Sensor> sensors = sensorManager.getSensorList(
Sensor.TYPE_ACCELEROMETER);
if (sensors.size() > 0) {
sensor = sensors.get(0);
// Register Accelerometer Listener
running = sensorManager.registerListener(
sensorEventListener, sensor,
SensorManager.SENSOR_DELAY_GAME);
listener = accelerometerListener;
}
}
/**
* Configures threshold and interval
* And registers a listener and start listening
* #param accelerometerListener
* callback for accelerometer events
* #param threshold
* minimum acceleration variation for considering shaking
* #param interval
* minimum interval between to shake events
*/
public static void startListening(
AccelerometerListener accelerometerListener,
int threshold, int interval) {
configure(threshold, interval);
startListening(accelerometerListener);
}
/**
* The listener that listen to events from the accelerometer listener
*/
private static SensorEventListener sensorEventListener =
new SensorEventListener() {
private long now = 0;
private long timeDiff = 0;
private long lastUpdate = 0;
private long lastShake = 0;
private float x = 0;
private float y = 0;
private float z = 0;
private float lastX = 0;
private float lastY = 0;
private float lastZ = 0;
private float force = 0;
public void onAccuracyChanged(Sensor sensor, int accuracy) {}
public void onSensorChanged(SensorEvent event) {
// use the event timestamp as reference
// so the manager precision won't depends
// on the AccelerometerListener implementation
// processing time
now = event.timestamp;
x = event.values[0];
y = event.values[1];
z = event.values[2];
// if not interesting in shake events
// just remove the whole if then else block
if (lastUpdate == 0) {
lastUpdate = now;
lastShake = now;
lastX = x;
lastY = y;
lastZ = z;
Toast.makeText(aContext,"no",
Toast.LENGTH_SHORT).show();
} else {
timeDiff = now - lastUpdate;
if (timeDiff > 0) {
/*force = Math.abs(x + y + z - lastX - lastY - lastZ)
/ timeDiff;*/
force = Math.abs(x + y + z - lastX - lastY - lastZ);
if (Float.compare(force, threshold) >0 ) {
//Toast.makeText(Accelerometer.getContext(),
//(now-lastShake)+" >= "+interval, 1000).show();
if (now - lastShake >= interval) {
// trigger shake event
listener.onShake(force);
}
else
{
Toast.makeText(aContext,"No Motion detected",
Toast.LENGTH_SHORT).show();
}
lastShake = now;
}
lastX = x;
lastY = y;
lastZ = z;
lastUpdate = now;
}
else
{
Toast.makeText(aContext,"No Motion detected", Toast.LENGTH_SHORT).show();
}
}
// trigger change event
listener.onAccelerationChanged(x, y, z);
}
};}

Hey You can use this method to ge the current timeStamp and to claculate time difference.
/*
* This method is calling to get current date
*
* */
public static String getCurrentDateWitTime() {
Calendar c = Calendar.getInstance();
// SimpleDateFormat df = new SimpleDateFormat(" yyyy-MM-dd'T'HH:mm:ss'Z");
SimpleDateFormat df = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");
String formattedDate = df.format(c.getTime());
return formattedDate;
}
public static long getDifference(String oldTime)
{
SimpleDateFormat dateFormat = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");
Date oldDate = null;
try {
oldDate = dateFormat.parse(oldTime);
} catch (ParseException e) {
e.printStackTrace();
}
Date cDate = new Date();
Long timeDiff = cDate.getTime() - oldDate.getTime();
enter code here
long diffInSec = TimeUnit.MILLISECONDS.toSeconds(timeDiff);
return diffInSec;
}

How to detect movement of an android device?

I need suggestion about how to detect the amount of movement of an android device. Suppose I have put the phone on a table or bed and then if somebody taps the table or sits or laydown on the bed then I want to detect the movement of the android device.
Actually I know that android has motion sensors APIs but I don't know which sensor to use and what sensor type is best for this type of movement detection.
I would be glad if someone can share some basic demo code.

Definitely work with the accelerometer:
// Start with some variables
private SensorManager sensorMan;
private Sensor accelerometer;
private float[] mGravity;
private float mAccel;
private float mAccelCurrent;
private float mAccelLast;
// In onCreate method
sensorMan = (SensorManager)getSystemService(SENSOR_SERVICE);
accelerometer = sensorMan.getDefaultSensor(Sensor.TYPE_ACCELEROMETER);
mAccel = 0.00f;
mAccelCurrent = SensorManager.GRAVITY_EARTH;
mAccelLast = SensorManager.GRAVITY_EARTH;
// And these:
#Override
public void onResume() {
super.onResume();
sensorMan.registerListener(this, accelerometer,
SensorManager.SENSOR_DELAY_UI);
}
#Override
protected void onPause() {
super.onPause();
sensorMan.unregisterListener(this);
}
#Override
public void onSensorChanged(SensorEvent event) {
if (event.sensor.getType() == Sensor.TYPE_ACCELEROMETER){
mGravity = event.values.clone();
// Shake detection
float x = mGravity[0];
float y = mGravity[1];
float z = mGravity[2];
mAccelLast = mAccelCurrent;
mAccelCurrent = FloatMath.sqrt(x*x + y*y + z*z);
float delta = mAccelCurrent - mAccelLast;
mAccel = mAccel * 0.9f + delta;
// Make this higher or lower according to how much
// motion you want to detect
if(mAccel > 3){
// do something
}
}
}
#Override
public void onAccuracyChanged(Sensor sensor, int accuracy) {
// required method
}

I used the following class:
public class MovementDetector implements SensorEventListener {
protected final String TAG = getClass().getSimpleName();
private SensorManager sensorMan;
private Sensor accelerometer;
private MovementDetector() {
}
private static MovementDetector mInstance;
public static MovementDetector getInstance() {
if (mInstance == null) {
mInstance = new MovementDetector();
mInstance.init();
}
return mInstance;
}
//////////////////////
private HashSet<Listener> mListeners = new HashSet<MovementDetector.Listener>();
private void init() {
sensorMan = (SensorManager) GlobalData.getInstance().getContext().getSystemService(Context.SENSOR_SERVICE);
accelerometer = sensorMan.getDefaultSensor(Sensor.TYPE_LINEAR_ACCELERATION);
}
public void start() {
sensorMan.registerListener(this, accelerometer, SensorManager.SENSOR_DELAY_NORMAL);
}
public void stop() {
sensorMan.unregisterListener(this);
}
public void addListener(Listener listener) {
mListeners.add(listener);
}
/* (non-Javadoc)
* #see android.hardware.SensorEventListener#onSensorChanged(android.hardware.SensorEvent)
*/
#Override
public void onSensorChanged(SensorEvent event) {
if (event.sensor.getType() == Sensor.TYPE_LINEAR_ACCELERATION) {
float x = event.values[0];
float y = event.values[1];
float z = event.values[2];
float diff = (float) Math.sqrt(x * x + y * y + z * z);
if (diff > 0.5) // 0.5 is a threshold, you can test it and change it
Log.d(TAG,"Device motion detected!!!!");
for (Listener listener : mListeners) {
listener.onMotionDetected(event, diff);
}
}
}
/* (non-Javadoc)
* #see android.hardware.SensorEventListener#onAccuracyChanged(android.hardware.Sensor, int)
*/
#Override
public void onAccuracyChanged(Sensor sensor, int accuracy) {
// TODO Auto-generated method stub
}
public interface Listener {
void onMotionDetected(SensorEvent event, float acceleration);
}
}
Usage:
On my activity onCrate():
MovementDetector.getInstance().addListener(new MovementDetector.Listener() {
#Override
public void onMotionDetected(SensorEvent event, float acceleration) {
mMotionDetectionTextView.setText("Acceleration: ["+String.format("%.3f",event.values[0])+","+String.format("%.3f",event.values[1])+","+String.format("%.3f",event.values[2])+"] "+String.format("%.3f", acceleration));
if (acceleration > SettingsHelper.getInstance().getMotionDetectionThreshold()){
mMotionDetectionTextView.setTextColor(Color.RED);
} else {
mMotionDetectionTextView.setTextColor(Color.WHITE);
}
}
});
On my activity onResume():
MovementDetector.getInstance().start();
On my activity onPause():
MovementDetector.getInstance().stop();

This code is for walking detection (Modified from #anthropomo code)
to get smoother value.
// initialize
private SensorManager sensorMan;
private Sensor accelerometer;
private float[] mGravity;
private double mAccel;
private double mAccelCurrent;
private double mAccelLast;
private boolean sensorRegistered = false;
// onCreate
sensorMan = (SensorManager) context.getSystemService(Context.SENSOR_SERVICE);
accelerometer = sensorMan.getDefaultSensor(Sensor.TYPE_ACCELEROMETER);
mAccel = 0.00f;
mAccelCurrent = SensorManager.GRAVITY_EARTH;
mAccelLast = SensorManager.GRAVITY_EARTH;
sensorMan.registerListener(this, accelerometer,
SensorManager.SENSOR_DELAY_NORMAL);
sensorRegistered = true;
// onSensorChanged
private int hitCount = 0;
private double hitSum = 0;
private double hitResult = 0;
private final int SAMPLE_SIZE = 50; // change this sample size as you want, higher is more precise but slow measure.
private final double THRESHOLD = 0.2; // change this threshold as you want, higher is more spike movement
#Override
public void onSensorChanged(SensorEvent event) {
if (event.sensor.getType() == Sensor.TYPE_ACCELEROMETER) {
mGravity = event.values.clone();
// Shake detection
double x = mGravity[0];
double y = mGravity[1];
double z = mGravity[2];
mAccelLast = mAccelCurrent;
mAccelCurrent = Math.sqrt(x * x + y * y + z * z);
double delta = mAccelCurrent - mAccelLast;
mAccel = mAccel * 0.9f + delta;
if (hitCount <= SAMPLE_SIZE) {
hitCount++;
hitSum += Math.abs(mAccel);
} else {
hitResult = hitSum / SAMPLE_SIZE;
Log.d(TAG, String.valueOf(hitResult));
if (hitResult > THRESHOLD) {
Log.d(TAG, "Walking");
} else {
Log.d(TAG, "Stop Walking");
}
hitCount = 0;
hitSum = 0;
hitResult = 0;
}
}
}

I have been working with a similar idea to measure the displacement of the phone. I have found that the LINEAR ACCELERATION (and ACCELERATION) are not accurate enough to correctly measure the displacement.
This code should work a little better:
(ititialize)
private SensorManager sensorManager;
private Sensor accelerometer;
double[] maxAccelerations = new double[3];
double[] position = new double[3];
long[] times = new long[3];
// time combined with maxAcceleration can approximate the change in position,
// with the formula Δpos = (maxAcceleration * time ^ 2) / 6
long currentTime;
(onCreate)
sensorManager = (SensorManager) getSystemService(SENSOR_SERVICE);
if (sensorManager.getDefaultSensor(Sensor.TYPE_LINEAR_ACCELERATION) != null) {
accelerometer = sensorManager.getDefaultSensor(Sensor.TYPE_LINEAR_ACCELERATION);
sensorManager.registerListener(this, accelerometer, sensorManager.SENSOR_DELAY_FASTEST);
}
currentTime = System.currentTimeMillis();
for(int i=0;i<3;i++){
times[i]=currentTime;
}
else{
throw "Error";
//Which will throw an error, if not the error that is expected. 😉
}
(onSensorChanged and onAccuracyChanged)
#Override
public void onAccuracyChanged(Sensor ignore, int thisFunction) {
}
#Override
public void onSensorChanged(SensorEvent event) {
if (event.sensor.getType() == Sensor.TYPE_LINEAR_ACCELERATION) {
for(int i=0;i<3;i++){
if(Math.abs(event.values[i])<0.01){
// Note: this is to try to prevent accelerating time from being counted when the phone is stationary. 0.01 should be
// changed to an appropriate sensitivity level that can be calculated by finding an average noise level when the phone is stationary.
times[i]=System.currentTimeMillis();
}
if(event.values[i]>maxAccelerations[i] && maxAccelerations[i]>=0){
maxAccelerations[i]=event.values[i];
}
else if(event.values[i]<maxAccelerations[i] && maxAccelerations[i]<=0){
maxAccelerations[i]=event.values[i];
}
else if(event.values[i]>0 && maxAccelerations[i]<0){
currentTime = System.currentTimeMillis();
position[i]+=maxAccelerations[i] * (times[i]-currentTime)*(times[i]-currentTime) / 6;
times[i]=currentTime;
maxAccelerations[i]=event.values[i];
}
else if(event.values[i]<0 && maxAccelerations[i]>0){
currentTime = System.currentTimeMillis();
position[i]+=maxAccelerations[i] * (times[i]-currentTime)*(times[i]-currentTime) / 6;
times[i]=currentTime;
maxAccelerations[i]=event.values[i];
}
}
}
}

While I don't have demo code (since you aren't specific enough), a good start is here: http://developer.android.com/guide/topics/sensors/sensors_motion.html (and other items on the left).

if you are trying to find the displacement of your phone, you need to find the
Linear acceleration acting on your phone rather than the acceleration due to gravity
android has a built in converter to find the LINEAR ACCELERATION acting on your mobile phone
https://github.com/yuvaramsingh94/AndroidSensorTestCode/tree/master
this is a code where you can see how to get the raw value of LINEAR ACCELERATION

How to Get Device is Shaked or not using SensorListener? [duplicate]

This question already has answers here:
Closed 11 years ago.
Possible Duplicate:
Android: I want to shake it!
How to use Accelerometer to measure distance for Android Application Development
How to Implement SensorListener?
If Device is not Shaking at that time the Alertdialog is Displayed so how to get the device is shaking or not?

Use this code for check device is shake or not
// Need to implement SensorListener
public class ShakeActivity extends Activity implements SensorListener {
// For shake motion detection.
private SensorManager sensorMgr;
private long lastUpdate = -1;
private float x, y, z;
private float last_x, last_y, last_z;
private static final int SHAKE_THRESHOLD = 800;
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
...... // other initializations
// start motion detection
sensorMgr = (SensorManager) getSystemService(SENSOR_SERVICE);
boolean accelSupported = sensorMgr.registerListener(this,
SensorManager.SENSOR_ACCELEROMETER,
SensorManager.SENSOR_DELAY_GAME);
if (!accelSupported) {
// on accelerometer on this device
sensorMgr.unregisterListener(this,
SensorManager.SENSOR_ACCELEROMETER);
}
}
protected void onPause() {
if (sensorMgr != null) {
sensorMgr.unregisterListener(this,
SensorManager.SENSOR_ACCELEROMETER);
sensorMgr = null;
}
super.onPause();
}
public void onAccuracyChanged(int arg0, int arg1) {
// TODO Auto-generated method stub
}
public void onSensorChanged(int sensor, float[] values) {
if (sensor == SensorManager.SENSOR_ACCELEROMETER) {
long curTime = System.currentTimeMillis();
// only allow one update every 100ms.
if ((curTime - lastUpdate) > 100) {
long diffTime = (curTime - lastUpdate);
lastUpdate = curTime;
x = values[SensorManager.DATA_X];
y = values[SensorManager.DATA_Y];
z = values[SensorManager.DATA_Z];
float speed = Math.abs(x+y+z - last_x - last_y - last_z)
/ diffTime * 10000;
if (speed > SHAKE_THRESHOLD) {
// yes, this is a shake action! Do something about it!
// if device is shake with threshold then this condition become true..
// you can put your code here...
}
last_x = x;
last_y = y;
last_z = z;
}
}
}
}

find left and right turn in android mobile

how to find out mobile turn left and right.depending on left and right turn i need to one ball?

You need to implement SensorListener to detect phone shaking.
// Need to implement SensorListener
public class ShakeActivity extends Activity implements SensorListener {
// For shake motion detection.
private SensorManager sensorMgr;
private long lastUpdate = -1;
private float x, y, z;
private float last_x, last_y, last_z;
private static final int SHAKE_THRESHOLD = 800;
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
...... // other initializations
// start motion detection
sensorMgr = (SensorManager) getSystemService(SENSOR_SERVICE);
boolean accelSupported = sensorMgr.registerListener(this,
SensorManager.SENSOR_ACCELEROMETER,
SensorManager.SENSOR_DELAY_GAME);
if (!accelSupported) {
// on accelerometer on this device
sensorMgr.unregisterListener(this,
SensorManager.SENSOR_ACCELEROMETER);
}
}
protected void onPause() {
if (sensorMgr != null) {
sensorMgr.unregisterListener(this,
SensorManager.SENSOR_ACCELEROMETER);
sensorMgr = null;
}
super.onPause();
}
public void onAccuracyChanged(int arg0, int arg1) {
// TODO Auto-generated method stub
}
public void onSensorChanged(int sensor, float[] values) {
if (sensor == SensorManager.SENSOR_ACCELEROMETER) {
long curTime = System.currentTimeMillis();
// only allow one update every 100ms.
if ((curTime - lastUpdate) > 100) {
long diffTime = (curTime - lastUpdate);
lastUpdate = curTime;
x = values[SensorManager.DATA_X];
y = values[SensorManager.DATA_Y];
z = values[SensorManager.DATA_Z];
float speed = Math.abs(x+y+z - last_x - last_y - last_z)
/ diffTime * 10000;
if (speed > SHAKE_THRESHOLD) {
// yes, this is a shake action! Do something about it!
}
last_x = x;
last_y = y;
last_z = z;
}
}
}
}
Have a look at the tutorial, detect shake motion