Develop Reference

Android calculating Velocity wtih Accelerometer data

Due to the power consuming GPS data, I would like to calculate the device speed with only the accelerometer x,y and z data. I have read a lot of questions about this topic and I tried many set-ups to find a satisfactory solution to calculate the speed when my device is in my car.
It seems so simple but nothing works, which drives me crazy.
Been trying the Sensor.TYPE_LINEAR_ACCELERATION and the Sensor.TYPE_ACCELEROMETER with removed gravity. Tried a Low Pass Filter on the Linear acceleration data. Unfortunately all with no succes.
Looks like the calculated speed is correct but testing in my car the calculated speed doesn't get higher then about 2 m/s.
below a code snip
mAccelerometer = mSensorManager.getDefaultSensor(Sensor.TYPE_LINEAR_ACCELERATION);
public void onSensorChanged(SensorEvent event) {
if (event.sensor == mAccelerometer) {
if (timestamp != 0) {
final float dT = (event.timestamp - timestamp) * NS2S;
lax = event.values[0];
lay = event.values[1];
laz = event.values[2];
vx = vxo + lax * dT ;
vy = vyo + lay * dT ;
vz = vzo + laz * dT ;
speed = (float) (Math.sqrt(vx*vx + vy*vy + vz*vz)) ;
if (speed < 0.01) {speed = 0 ; }
tv_speed.setText(String.valueOf(speed));
}
timestamp = event.timestamp;
}
}
Hope someone can help, thanks a lot.

It's possible to compute distance and speed using only accelerometer, but with three conditions:
1. Linear movement - trajectory must be straight.
2. Slope of the road must be constant.
3. You must perform calibration procedure before start.
Where can you use this method with such restrictions - it's up to you... Now, how to do it:
We need something, implementing SensorEventListener interface. For the future use, let's add following abstract class:
public abstract class Accelerometer implements SensorEventListener {
protected float lastX;
protected float lastY;
protected float lastZ;
public abstract Point getPoint();
public void onAccuracyChanged(Sensor arg0, int arg1) {
}
}
and this will be our SensorEventListener:
public class XYZAccelerometer extends Accelerometer {
private static final int BUFFER_SIZE = 500;
// calibration
private float dX = 0;
private float dY = 0;
private float dZ = 0;
// buffer variables
private float X;
private float Y;
private float Z;
private int cnt = 0;
// returns last SenorEvent parameters
public Point getLastPoint(){
return new Point(lastX, lastY, lastZ, 1);
}
// returrns parameters, using buffer: average acceleration
// since last call of getPoint().
public Point getPoint(){
if (cnt == 0){
return new Point(lastX, lastY, lastZ, 1);
}
Point p = new Point(X, Y, Z, cnt);
reset();
return p;
}
// resets buffer
public void reset(){
cnt = 0;
X = 0;
Y = 0;
Z = 0;
}
public void onSensorChanged(SensorEvent se) {
float x = se.values[SensorManager.DATA_X] + dX;
float y = se.values[SensorManager.DATA_Y] + dY;
float z = se.values[SensorManager.DATA_Z] + dZ;
lastX = x;
lastY = y;
lastZ = z;
X+= x;
Y+= y;
Z+= z;
if (cnt < BUFFER_SIZE-1) {
cnt++;
} else
{
reset();
}
}
public int getCnt(){
return cnt;
}
public void setdX(float dX) {
this.dX = dX;
}
public void setdY(float dY) {
this.dY = dY;
}
public void setdZ(float dZ) {
this.dZ = dZ;
}
}
Calibrating accelerometer must be called before each experiment. Phone orientation must not be changed while measuring.
To calibrate accelerometer, i use this class:
public class Calibrator {
final static int UPDATE_INTERVAL = 400;
final static int ITERATIONS = 5;
Handler hRefresh;
XYZAccelerometer acc;
int eventNumber;
private LinkedList calData;
public Calibrator(Handler hRefresh, XYZAccelerometer acc, int eventNumber) {
this.hRefresh = hRefresh;
this.acc = acc;
this.eventNumber = eventNumber;
}
public void calibrate() {
final Timer calTimer = new Timer();
calData = new LinkedList();
acc.setdX(0);
acc.setdY(0);
acc.setdZ(0);
calTimer.scheduleAtFixedRate(
new TimerTask() {
public void run() {
addCalData(calData);
if (calData.size() > ITERATIONS) {
calTimer.cancel();
try {
calSensor(calData);
} catch (Exception ex) {
try {
throw ex;
} catch (Exception ex1) {
hRefresh.sendEmptyMessage(5);
}
}
hRefresh.sendEmptyMessage(eventNumber);
}
}
},
0,
UPDATE_INTERVAL);
}
private void addCalData(LinkedList cD) {
Point p = acc.getPoint();
cD.add(p);
acc.reset();
}
private void calSensor(LinkedList cD) throws Exception {
if (cD.size() < ITERATIONS-1) {
throw new Exception("not enough data to calibrate");
}
float x = 0;
float y = 0;
float z = 0;
// Don't use first measure
for (int i = 1; i < cD.size(); ++i) {
x += cD.get(i).getX();
y += cD.get(i).getY();
z += cD.get(i).getZ();
}
x = x / (cD.size() - 1);
y = y / (cD.size() - 1);
z = z / (cD.size() - 1);
acc.setdX(-x);
acc.setdY(-y);
acc.setdZ(-z);
}
}
maintenance class to keep data of one measure
public class Point {
private float x = 0;
private float y = 0;
private float z = 0;
private int cnt = 1;
public float getX() {
return x/(float)cnt;
}
public float getY() {
return y/(float)cnt;
}
public float getZ() {
return z/(float)cnt;
}
public Point(float x, float y, float z, int cnt) {
this.x = x;
this.y = y;
this.z = z;
this.cnt = cnt;
}
public float getForce(){
return getX()*getX()+getY()*getY()+getZ()*getZ();
}
}
And class to process data of measure
public class MeasurePoint {
private float x;
private float y;
private float z;
private float speedBefore;
private float speedAfter;
private float distance;
private float acceleration;
private long interval;
private Point averagePoint;
public MeasurePoint(float x, float y, float z, float speedBefore, long interval, Point averagePoint) {
this.x = x;
this.y = y;
this.z = z;
this.speedBefore = speedBefore;
this.interval = interval;
this.averagePoint = averagePoint;
speedAfter = 0;
calc();
}
private void calc(){
//Acceleration as projection of current vector on average
acceleration = this.x*averagePoint.getX() +
this.y*averagePoint.getY() +
this.z*averagePoint.getZ();
acceleration = acceleration / ((float)Math.sqrt(averagePoint.getForce()));
float t = ((float)interval / 1000f);
speedAfter = speedBefore + acceleration * t;
distance = speedBefore*t + acceleration*t*t/2;
}
public String getStoreString(){
String s = "write here whatever you want";
return s;
}
// add getters
}
This one - to store and save data array
public class MeasureData {
// points from accelerometr
private LinkedList accData;
private LinkedList data;
// timer interval of generating points
private long interval;
public MeasureData(long interval) {
this.interval = interval;
accData = new LinkedList ();
data = new LinkedList ();
}
public void addPoint(Point p){
accData.add(p);
}
public void process(){
for(int i = 0; i < accData.size(); ++i){
Point p = accData.get(i);
float speed = 0;
if(i > 0){
speed = data.get(i-1).getSpeedAfter();
}
data.add(new MeasurePoint(p.getX(), p.getY(), p.getZ(), speed, interval, getAveragePoint()));
}
}
public boolean saveExt(Context con, String fname) throws Throwable {
try {
File file = new File(con.getExternalFilesDir(null), fname);
FileOutputStream os = new FileOutputStream(file);
OutputStreamWriter out = new OutputStreamWriter(os);
for (int i = 0; i < data.size(); ++i) {
MeasurePoint m = data.get(i);
out.write(m.getStoreString());
}
out.close();
} catch (Throwable t) {
throw (t);
}
return true;
}
private Point getAveragePoint() {
float x = 0;
float y = 0;
float z = 0;
for(int i = 0; i < accData.size(); ++i){
Point p = accData.get(i);
x += p.getX();
y += p.getY();
z += p.getZ();
}
return new Point(x, y, z, 1);
}
public float getLastSpeed(){
return data.getLast().getSpeedAfter();
}
public float getLastSpeedKm(){
float ms = getLastSpeed();
return ms*3.6f;
}
}
And, finally, how to use all this in your activity(I cleaned it up a lot, sorry if it will not complie - fill free to write it in comments:
public class TestActivity extends Activity {
static final int TIMER_DONE = 2;
static final int START = 3;
static final int CAL_TIMER_DONE = 4;
static final int ERROR = 5;
private StartCatcher mStartListener;
private XYZAccelerometer xyzAcc;
private SensorManager mSensorManager;
private static final long UPDATE_INTERVAL = 500;
private static final long MEASURE_TIMES = 20;
private Timer timer;
private TextView tv;
private Button testBtn;
int counter;
private MeasureData mdXYZ;
/** handler for async events*/
Handler hRefresh = new Handler() {
#Override
public void handleMessage(Message msg) {
switch (msg.what) {
case TIMER_DONE:
onMeasureDone();
String es1 = Float.toString(Math.round(mdXYZ.getLastSpeedKm()*100)/100f);
tv.append(" END SPEED " + es1 + " " + es2 + " \n");
enableButtons();
break;
case START:
tv.append(" START");
timer = new Timer();
timer.scheduleAtFixedRate(
new TimerTask() {
public void run() {
dumpSensor();
}
},
0,
UPDATE_INTERVAL);
break;
case ERROR:
Toast.makeText(getApplicationContext(), "ERROR", Toast.LENGTH_SHORT).show();
break;
}
}
};
/** Called when the activity is first created. */
#Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.main);
tv = (TextView) findViewById(R.id.txt);
testBtn = (Button) findViewById(R.id.btn);
}
#Override
protected void onResume() {
super.onResume();
tv.append("\n ..");
mSensorManager = (SensorManager) getSystemService(Context.SENSOR_SERVICE);
setAccelerometer();
setStartCatcher();
mSensorManager.registerListener(xyzAcc,
mSensorManager.getDefaultSensor(Sensor.TYPE_ACCELEROMETER),
SensorManager.SENSOR_DELAY_GAME);
}
#Override
protected void onPause() {
mSensorManager.unregisterListener(xyzAcc);
super.onPause();
}
public void onButtonTest(View v) {
disableButtons();
mdXYZ = new MeasureData(UPDATE_INTERVAL);
counter = 0;
tv.setText("");
tv.append("Calibrating");
Calibrator cal = new Calibrator(hRefresh, xyzAcc, START);
cal.calibrate();
}
void dumpSensor() {
++counter;
mdXYZ.addPoint(xyzAcc.getPoint());
hRefresh.sendEmptyMessage(TICK);
if (counter > MEASURE_TIMES) {
timer.cancel();
hRefresh.sendEmptyMessage(TIMER_DONE);
}
}
private void enableButtons() {
testBtn.setEnabled(true);
}
private void setAccelerometer() {
xyzAcc = new XYZAccelerometer();
mSensorManager.registerListener(xyzAcc,
mSensorManager.getDefaultSensor(Sensor.TYPE_ACCELEROMETER),
SensorManager.SENSOR_DELAY_UI);
}
private void disableButtons() {
testBtn.setEnabled(false);
}
private void onMeasureDone() {
try {
mdXYZ.process();
long now = System.currentTimeMillis();
mdXYZ.saveExt(this, Long.toString(now) + ".csv");
} catch (Throwable ex) {
Toast.makeText(this, ex.getMessage().toString(), Toast.LENGTH_SHORT);
}
}
}
<serviceLinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:orientation="vertical"
android:layout_width="fill_parent"
android:layout_height="fill_parent"
>
<serviceButton
android:id="#+id/btn"
android:text="TEST"
android:layout_width="300px"
android:layout_height="200px"
android:onClick="onButtonTest" />
<serviceTextView
android:id = "#+id/txt"
android:layout_width="fill_parent"
android:layout_height="wrap_content"
android:text=":"
/>
<service/LinearLayout>

Although at the developer.android.com site it is stated clearly that
you could use the linear accelerometer to see how fast your car is going"
But I did not find anything (in testing or in examples or code) that showed this is really true.
Now, unfortunately, I am convinced that it is not possible to calculate the speed of a car with the linear accelerometer.

Please see the below code to get the velocity using accelerometer
public class SensorTestActivity extends Activity implements SensorEventListener {
double calibration = Double.NaN;
private SensorManager sensorManager;
private boolean color = false;
private TextView view;
private long lastUpdate;
float appliedAcceleration = 0;
float currentAcceleration = 0;
float velocity = 0;
Date lastUpdatedate;
/** Called when the activity is first created. */
#Override
public void onCreate(Bundle savedInstanceState) {
requestWindowFeature(Window.FEATURE_NO_TITLE);
getWindow().setFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN,
WindowManager.LayoutParams.FLAG_FULLSCREEN);
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main2);
view = findViewById(R.id.textView);
// view.setBackgroundColor(Color.GREEN);
lastUpdatedate = new Date(System.currentTimeMillis());
sensorManager = (SensorManager) getSystemService(SENSOR_SERVICE);
lastUpdate = System.currentTimeMillis();
}
#Override
public void onSensorChanged(SensorEvent event) {
// if (event.sensor.getType() == Sensor.TYPE_ACCELEROMETER) {
// getAccelerometer(event);
// }
double x = event.values[0];
double y = event.values[1];
double z = event.values[2];
double a = Math.sqrt(Math.pow(x, 2) + Math.pow(y, 2) + Math.pow(z, 2));
if (calibration == Double.NaN)
calibration = a;
else {
updateVelocity();
currentAcceleration = (float)a;
}
}
private void getAccelerometer(SensorEvent event) {
float[] values = event.values;
// Movement
float x = values[0];
float y = values[1];
float z = values[2];
float accelationSquareRoot = (x * x + y * y + z * z)
/ (SensorManager.GRAVITY_EARTH * SensorManager.GRAVITY_EARTH);
long actualTime = event.timestamp;
if (accelationSquareRoot >= 2) //
{
if (actualTime - lastUpdate < 200) {
return;
}
lastUpdate = actualTime;
// Toast.makeText(this, "Device was shuffed", Toast.LENGTH_SHORT)
// .show();
if (color) {
view.setBackgroundColor(Color.GREEN);
} else {
view.setBackgroundColor(Color.RED);
}
color = !color;
view.setText("SPEEDDDDD=== "+accelationSquareRoot);
// Log.i("SensorTestActivity","SPEEDDDDD=== "+accelationSquareRoot+" ");
}
}
private void updateVelocity() {
// Calculate how long this acceleration has been applied.
Date timeNow = new Date(System.currentTimeMillis());
long timeDelta = timeNow.getTime()-lastUpdatedate.getTime();
lastUpdatedate.setTime(timeNow.getTime());
// Calculate the change in velocity at the
// current acceleration since the last update.
float deltaVelocity = appliedAcceleration * (timeDelta/1000);
appliedAcceleration = currentAcceleration;
// Add the velocity change to the current velocity.
velocity += deltaVelocity;
final double mph = (Math.round(100*velocity / 1.6 * 3.6))/100;
Log.i("SensorTestActivity","SPEEDDDDD=== "+mph+" "+velocity);
}
#Override
public void onAccuracyChanged(Sensor sensor, int accuracy) {
}
#Override
protected void onResume() {
super.onResume();
// register this class as a listener for the orientation and
// accelerometer sensors
sensorManager.registerListener(this,
sensorManager.getDefaultSensor(Sensor.TYPE_ACCELEROMETER),
SensorManager.SENSOR_DELAY_NORMAL);
}
#Override
protected void onPause() {
// unregister listener
super.onPause();
sensorManager.unregisterListener(this);
}
}

how to detect whether the android phone is dropping to the ground?

can i computing the velocity with the accelerations from the sensor which type is SENSOR_TYPE_ACCELEROMETER?
or can i get the orientation of the the accelerations from the sensor which type is SENSOR_TYPE_ACCELEROMETER?
i have seen some blogs about checking the value of the vector of accelerations to detect whether the android phone is filling down or not.
but ,the reson may be the android phone is shaking and is not filling.
my code is:
/**
* how often analysising the accelerometer?(Millisecond)
*/
private static final int ANALYSIS_ACCELERATION_INTERVAL = 500;
/**
* how often checking the accelerometer?(Millisecond)
*/
private static final int CHECK_TIME_INTERVAL = 5000;
/**
* when the sMinorMaxAccelerationInOneSecoud[0] is less than
* ACCELERATION_CRITICAL_VALUE[0],and the
* sMinorMaxAccelerationInOneSecoud[1] is more than
* ACCELERATION_CRITICAL_VALUE[1],i think the phone dropped to the
* ground.
*/
private static float ACCELERATION_CRITICAL_VALUE[] = {2, 40};
/**
* during{#link #ANALYSIS_ACCELERATION_INTERVAL},the min accelerometer
* of the phone is sMinorMaxAccelerationInOneSecoud[0]，the max
* accelerometer of the phone is saved at
* sMinorMaxAccelerationInOneSecoud[1].
*/
private static float sMinorMaxAccelerationInOneSecoud[] = {0, 0};
/**
* the last time when checking the accelerometer
*/
private static long sLastCheckTime = 0;
/**
* the last time when analysising the accelerometer
*/
private static long sLastAnalysisTime = 0;
/**
* during {#link #CHECK_TIME_INTERVAL}，is phone dropped to ground?
*/
private static boolean sIsFallDown = false;
private SensorManager mSensorManager;
public void receiveCondition() {
// a dialog
Intent intent = new Intent();
intent.setClass(GlobalHolder.getApplicationContext(), PhoneDroppedDialog.class);
intent.setFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
GlobalHolder.getApplicationContext().startActivity(intent);
}
public void start() {
mSensorManager = (SensorManager) getApplicationContext().getSystemService(Context.SENSOR_SERVICE);
mSensorManager.registerListener(this,
mSensorManager.getDefaultSensor(Sensor.TYPE_LINEAR_ACCELERATION),
SensorManager.SENSOR_DELAY_UI);
}
public void stop() {
mSensorManager.unregisterListener(this);
mSensorManager = null;
sMinorMaxAccelerationInOneSecoud = new float[]{0, 0};
sLastCheckTime = 0;
sLastAnalysisTime = 0;
}
#Override
public void onSensorChanged(SensorEvent event) {
int sensorType = event.sensor.getType();
if (sensorType != Sensor.TYPE_LINEAR_ACCELERATION) {
return;
}
// judge if the sMinorMaxAccelerationInOneSecoud[0] is less than
// ACCELERATION_CRITICAL_VALUE[0],and the
// sMinorMaxAccelerationInOneSecoud[1] is more than
// ACCELERATION_CRITICAL_VALUE[1]
analysisAcceleration(event.values);
long currentTime = System.currentTimeMillis();
long beta = currentTime - sLastCheckTime;
if (Math.abs(beta) < CHECK_TIME_INTERVAL) {
return;
}
// it have been more than one secound since the last check,so we need re-check if the phone have dropped to the ground.
checkIsFallDown();
// reset sLastCheckTime with the current time
sLastCheckTime = currentTime;
}
private void analysisAcceleration(float[] values) {
if (sIsFallDown) {
// if the phone have already dropped to the ground,we return directly.
return;
}
// whether the min sum vector of the accelerations on the x_axis,y_axis,zaxis is less than ACCELERATION_CRITICAL_VALUE[0]
// and the max sum vector of the accelerations on the x_axis,y_axis,zaxis is more than ACCELERATION_CRITICAL_VALUE[1]
if (sLastAnalysisTime == 0) {
sLastAnalysisTime = System.currentTimeMillis();
}
// the sum vector of the accelerations on the x_axis,y_axis,zaxis
float currentAcceleration = 0f;
for (int i = 0; i < values.length; i++) {
currentAcceleration += (values[i] * values[i]);
}
currentAcceleration = (float) Math.sqrt(currentAcceleration);
if (sMinorMaxAccelerationInOneSecoud[0] == 0 || sMinorMaxAccelerationInOneSecoud[0] > currentAcceleration) {
sMinorMaxAccelerationInOneSecoud[0] = currentAcceleration;
}
if (sMinorMaxAccelerationInOneSecoud[1] == 0 || sMinorMaxAccelerationInOneSecoud[1] < currentAcceleration) {
sMinorMaxAccelerationInOneSecoud[1] = currentAcceleration;
}
long currentTime = System.currentTimeMillis();
long delta = currentTime - sLastAnalysisTime;
if (delta < ANALYSIS_ACCELERATION_INTERVAL) {
return;
}
MLog.d(TAG, "during ANALYSIS_ACCELERATION_INTERVAL, the min value is " + sMinorMaxAccelerationInOneSecoud[0] + ", the max value is " + sMinorMaxAccelerationInOneSecoud[1]);
boolean isLessPre = sMinorMaxAccelerationInOneSecoud[0] < ACCELERATION_CRITICAL_VALUE[0];
boolean isMoreNext = sMinorMaxAccelerationInOneSecoud[1] > ACCELERATION_CRITICAL_VALUE[1];
sIsFallDown = isLessPre && isMoreNext;
sLastAnalysisTime = currentTime;
sMinorMaxAccelerationInOneSecoud = new float[]{0, 0};
}
private void checkIsFallDown() {
if (sIsFallDown) {
// the phone have dropped
receiveCondition();
MLog.d(TAG, "call the receiveCondition method.");
sMinorMaxAccelerationInOneSecoud = new float[]{0, 0};
sIsFallDown = false;
}
}
someone has a better idea?thanks!!

unable to make 2nd circle follow its own path

I am unable to create more circles which follows its own path with drawCircle .
I have used the code below which creates another circle but follows the path along the lines of 1st circle but not independent .How do I move both circles independent of each other?
I have added
c.drawCircle(ballX-100, ballY-100, 50, ballPaintyellow);
How do I make the above circle independent from the 1st circle?. I really appreciate any help.Thanks in Advance.
BouncingBallActivity.java
package com.stuffthathappens.games;
import static android.hardware.SensorManager.DATA_X;
import static android.hardware.SensorManager.DATA_Y;
import static android.hardware.SensorManager.SENSOR_ACCELEROMETER;
import static android.hardware.SensorManager.SENSOR_DELAY_GAME;
import java.util.concurrent.TimeUnit;
import android.app.Activity;
import android.graphics.Canvas;
import android.graphics.Color;
import android.graphics.Paint;
import android.hardware.SensorListener;
import android.hardware.SensorManager;
import android.os.Bundle;
import android.os.Vibrator;
import android.view.SurfaceHolder;
import android.view.SurfaceView;
import android.view.SurfaceHolder.Callback;
/**
* This activity shows a ball that bounces around. The phone's
* accelerometer acts as gravity on the ball. When the ball hits
* the edge, it bounces back and triggers the phone vibrator.
*/
#SuppressWarnings("deprecation")
public class BouncingBallActivity extends Activity implements Callback, SensorListener {
private static final int BALL_RADIUS =20;
private SurfaceView surface;
private SurfaceHolder holder;
private final BouncingBallModel model = new BouncingBallModel(BALL_RADIUS);
private GameLoop gameLoop;
private Paint backgroundPaint;
private Paint ballPaint;
private SensorManager sensorMgr;
private long lastSensorUpdate = -1;
private Paint ballPaintyellow;
#Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.bouncing_ball);
surface = (SurfaceView) findViewById(R.id.bouncing_ball_surface);
holder = surface.getHolder();
surface.getHolder().addCallback(this);
backgroundPaint = new Paint();
backgroundPaint.setColor(Color.WHITE);
ballPaint = new Paint();
ballPaint.setColor(Color.BLUE);
ballPaint.setAntiAlias(true);
ballPaintyellow = new Paint();
ballPaintyellow.setColor(Color.YELLOW);
ballPaintyellow.setAntiAlias(true);
}
#Override
protected void onPause() {
super.onPause();
model.setVibrator(null);
sensorMgr.unregisterListener(this, SENSOR_ACCELEROMETER);
sensorMgr = null;
model.setAccel(0, 0);
}
#Override
protected void onResume() {
super.onResume();
sensorMgr = (SensorManager) getSystemService(SENSOR_SERVICE);
boolean accelSupported = sensorMgr.registerListener(this,
SENSOR_ACCELEROMETER,
SENSOR_DELAY_GAME);
if (!accelSupported) {
// on accelerometer on this device
sensorMgr.unregisterListener(this, SENSOR_ACCELEROMETER);
// TODO show an error
}
// NOTE 1: you cannot get system services before onCreate()
// NOTE 2: AndroidManifest.xml must contain this line:
// <uses-permission android:name="android.permission.VIBRATE"/>
Vibrator vibrator = (Vibrator) getSystemService(Activity.VIBRATOR_SERVICE);
model.setVibrator(vibrator);
}
public void surfaceChanged(SurfaceHolder holder, int format, int width,
int height) {
model.setSize(width, height);
}
public void surfaceCreated(SurfaceHolder holder) {
gameLoop = new GameLoop();
gameLoop.start();
}
private void draw() {
// thread safety - the SurfaceView could go away while we are drawing
Canvas c = null;
try {
// NOTE: in the LunarLander they don't have any synchronization here,
// so I guess this is OK. It will return null if the holder is not ready
c = holder.lockCanvas();
// this needs to synchronize on something
if (c != null) {
doDraw(c);
}
} finally {
if (c != null) {
holder.unlockCanvasAndPost(c);
}
}
}
private void doDraw(Canvas c) {
int width = c.getWidth();
int height = c.getHeight();
c.drawRect(0, 0, width, height, backgroundPaint);
float ballX, ballY;
synchronized (model.LOCK) {
ballX = model.ballPixelX;
ballY = model.ballPixelY;
}
c.drawCircle(ballX, ballY, BALL_RADIUS, ballPaint);
c.drawCircle(ballX-100, ballY-100, 50, ballPaintyellow);
}
public void surfaceDestroyed(SurfaceHolder holder) {
try {
model.setSize(0,0);
gameLoop.safeStop();
} finally {
gameLoop = null;
}
}
private class GameLoop extends Thread {
private volatile boolean running = true;
public void run() {
while (running) {
try {
// don't like this hardcoding
TimeUnit.MILLISECONDS.sleep(5);
draw();
model.updatePhysics();
} catch (InterruptedException ie) {
running = false;
}
}
}
public void safeStop() {
running = false;
interrupt();
}
}
public void onAccuracyChanged(int sensor, int accuracy) {
}
public void onSensorChanged(int sensor, float[] values) {
if (sensor == SENSOR_ACCELEROMETER) {
long curTime = System.currentTimeMillis();
// only allow one update every 50ms, otherwise updates
// come way too fast
if (lastSensorUpdate == -1 || (curTime - lastSensorUpdate) > 50) {
lastSensorUpdate = curTime;
model.setAccel(values[DATA_X], values[DATA_Y]);
}
}
}
}
Bouncingballmodel.java
package com.stuffthathappens.games;
import java.util.concurrent.atomic.AtomicReference;
import android.os.Vibrator;
/**
* This data model tracks the width and height of the playing field along
* with the current position of a ball.
*/
public class BouncingBallModel {
// the ball speed is meters / second. When we draw to the screen,
// 1 pixel represents 1 meter. That ends up too slow, so multiply
// by this number. Bigger numbers speeds things up.
private final float pixelsPerMeter = 10;
private final int ballRadius;
// these are public, so make sure you synchronize on LOCK
// when reading these. I made them public since you need to
// get both X and Y in pairs, and this is more efficient than
// getter methods. With two getters, you'd still need to
// synchronize.
public float ballPixelX, ballPixelY;
private int pixelWidth, pixelHeight;
// values are in meters/second
private float velocityX, velocityY;
// typical values range from -10...10, but could be higher or lower if
// the user moves the phone rapidly
private float accelX, accelY;
/**
* When the ball hits an edge, multiply the velocity by the rebound.
* A value of 1.0 means the ball bounces with 100% efficiency. Lower
* numbers simulate balls that don't bounce very much.
*/
private static final float rebound = 0.8f;
// if the ball bounces and the velocity is less than this constant,
// stop bouncing.
private static final float STOP_BOUNCING_VELOCITY = 2f;
private volatile long lastTimeMs = -1;
public final Object LOCK = new Object();
private AtomicReference<Vibrator> vibratorRef =
new AtomicReference<Vibrator>();
public BouncingBallModel(int ballRadius) {
this.ballRadius = ballRadius;
}
public void setAccel(float ax, float ay) {
synchronized (LOCK) {
this.accelX = ax;
this.accelY = ay;
}
}
public void setSize(int width, int height) {
synchronized (LOCK) {
this.pixelWidth = width;
this.pixelHeight = height;
}
}
public int getBallRadius() {
return ballRadius;
}
/**
* Call this to move the ball to a particular location on the screen. This
* resets the velocity to zero, but the acceleration doesn't change so
* the ball should start falling shortly.
*/
public void moveBall(int ballX, int ballY) {
synchronized (LOCK) {
this.ballPixelX = ballX;
this.ballPixelY = ballY;
velocityX = 0;
velocityY = 0;
}
}
public void updatePhysics() {
// copy everything to local vars (hence the 'l' prefix)
float lWidth, lHeight, lBallX, lBallY, lAx, lAy, lVx, lVy;
synchronized (LOCK) {
lWidth = pixelWidth;
lHeight = pixelHeight;
lBallX = ballPixelX;
lBallY = ballPixelY;
lVx = velocityX;
lVy = velocityY;
lAx = accelX;
lAy = -accelY;
}
if (lWidth <= 0 || lHeight <= 0) {
// invalid width and height, nothing to do until the GUI comes up
return;
}
long curTime = System.currentTimeMillis();
if (lastTimeMs < 0) {
lastTimeMs = curTime;
return;
}
long elapsedMs = curTime - lastTimeMs;
lastTimeMs = curTime;
// update the velocity
// (divide by 1000 to convert ms to seconds)
// end result is meters / second
lVx += ((elapsedMs * lAx) / 1000) * pixelsPerMeter;
lVy += ((elapsedMs * lAy) / 1000) * pixelsPerMeter;
// update the position
// (velocity is meters/sec, so divide by 1000 again)
lBallX += ((lVx * elapsedMs) / 1000) * pixelsPerMeter;
lBallY += ((lVy * elapsedMs) / 1000) * pixelsPerMeter;
boolean bouncedX = false;
boolean bouncedY = false;
if (lBallY - ballRadius < 0) {
lBallY = ballRadius;
lVy = -lVy * rebound;
bouncedY = true;
} else if (lBallY + ballRadius > lHeight) {
lBallY = lHeight - ballRadius;
lVy = -lVy * rebound;
bouncedY = true;
}
if (bouncedY && Math.abs(lVy) < STOP_BOUNCING_VELOCITY) {
lVy = 0;
bouncedY = false;
}
if (lBallX - ballRadius < 0) {
lBallX = ballRadius;
lVx = -lVx * rebound;
bouncedX = true;
} else if (lBallX + ballRadius > lWidth) {
lBallX = lWidth - ballRadius;
lVx = -lVx * rebound;
bouncedX = true;
}
if (bouncedX && Math.abs(lVx) < STOP_BOUNCING_VELOCITY) {
lVx = 0;
bouncedX = false;
}
// safely copy local vars back to object fields
synchronized (LOCK) {
ballPixelX = lBallX;
ballPixelY = lBallY;
velocityX = lVx;
velocityY = lVy;
}
if (bouncedX || bouncedY) {
Vibrator v = vibratorRef.get();
if (v != null) {
v.vibrate(20L);
}
}
}
public void setVibrator(Vibrator v) {
vibratorRef.set(v);
}
}

Which view you are using has nothing to do with it ....
At the moment you have only one BouncingBallModel
private final BouncingBallModel model = new BouncingBallModel(BALL_RADIUS);
This is the one you see when you draw something. Now if you want to draw multiple balls, you will need many BouncingBallModel. So either create a BouncingBallModel model2 or make it dynamic using an array.
Then iterate over the array and draw each ball.

How to detect movement of an android device?

I need suggestion about how to detect the amount of movement of an android device. Suppose I have put the phone on a table or bed and then if somebody taps the table or sits or laydown on the bed then I want to detect the movement of the android device.
Actually I know that android has motion sensors APIs but I don't know which sensor to use and what sensor type is best for this type of movement detection.
I would be glad if someone can share some basic demo code.

Definitely work with the accelerometer:
// Start with some variables
private SensorManager sensorMan;
private Sensor accelerometer;
private float[] mGravity;
private float mAccel;
private float mAccelCurrent;
private float mAccelLast;
// In onCreate method
sensorMan = (SensorManager)getSystemService(SENSOR_SERVICE);
accelerometer = sensorMan.getDefaultSensor(Sensor.TYPE_ACCELEROMETER);
mAccel = 0.00f;
mAccelCurrent = SensorManager.GRAVITY_EARTH;
mAccelLast = SensorManager.GRAVITY_EARTH;
// And these:
#Override
public void onResume() {
super.onResume();
sensorMan.registerListener(this, accelerometer,
SensorManager.SENSOR_DELAY_UI);
}
#Override
protected void onPause() {
super.onPause();
sensorMan.unregisterListener(this);
}
#Override
public void onSensorChanged(SensorEvent event) {
if (event.sensor.getType() == Sensor.TYPE_ACCELEROMETER){
mGravity = event.values.clone();
// Shake detection
float x = mGravity[0];
float y = mGravity[1];
float z = mGravity[2];
mAccelLast = mAccelCurrent;
mAccelCurrent = FloatMath.sqrt(x*x + y*y + z*z);
float delta = mAccelCurrent - mAccelLast;
mAccel = mAccel * 0.9f + delta;
// Make this higher or lower according to how much
// motion you want to detect
if(mAccel > 3){
// do something
}
}
}
#Override
public void onAccuracyChanged(Sensor sensor, int accuracy) {
// required method
}

I used the following class:
public class MovementDetector implements SensorEventListener {
protected final String TAG = getClass().getSimpleName();
private SensorManager sensorMan;
private Sensor accelerometer;
private MovementDetector() {
}
private static MovementDetector mInstance;
public static MovementDetector getInstance() {
if (mInstance == null) {
mInstance = new MovementDetector();
mInstance.init();
}
return mInstance;
}
//////////////////////
private HashSet<Listener> mListeners = new HashSet<MovementDetector.Listener>();
private void init() {
sensorMan = (SensorManager) GlobalData.getInstance().getContext().getSystemService(Context.SENSOR_SERVICE);
accelerometer = sensorMan.getDefaultSensor(Sensor.TYPE_LINEAR_ACCELERATION);
}
public void start() {
sensorMan.registerListener(this, accelerometer, SensorManager.SENSOR_DELAY_NORMAL);
}
public void stop() {
sensorMan.unregisterListener(this);
}
public void addListener(Listener listener) {
mListeners.add(listener);
}
/* (non-Javadoc)
* #see android.hardware.SensorEventListener#onSensorChanged(android.hardware.SensorEvent)
*/
#Override
public void onSensorChanged(SensorEvent event) {
if (event.sensor.getType() == Sensor.TYPE_LINEAR_ACCELERATION) {
float x = event.values[0];
float y = event.values[1];
float z = event.values[2];
float diff = (float) Math.sqrt(x * x + y * y + z * z);
if (diff > 0.5) // 0.5 is a threshold, you can test it and change it
Log.d(TAG,"Device motion detected!!!!");
for (Listener listener : mListeners) {
listener.onMotionDetected(event, diff);
}
}
}
/* (non-Javadoc)
* #see android.hardware.SensorEventListener#onAccuracyChanged(android.hardware.Sensor, int)
*/
#Override
public void onAccuracyChanged(Sensor sensor, int accuracy) {
// TODO Auto-generated method stub
}
public interface Listener {
void onMotionDetected(SensorEvent event, float acceleration);
}
}
Usage:
On my activity onCrate():
MovementDetector.getInstance().addListener(new MovementDetector.Listener() {
#Override
public void onMotionDetected(SensorEvent event, float acceleration) {
mMotionDetectionTextView.setText("Acceleration: ["+String.format("%.3f",event.values[0])+","+String.format("%.3f",event.values[1])+","+String.format("%.3f",event.values[2])+"] "+String.format("%.3f", acceleration));
if (acceleration > SettingsHelper.getInstance().getMotionDetectionThreshold()){
mMotionDetectionTextView.setTextColor(Color.RED);
} else {
mMotionDetectionTextView.setTextColor(Color.WHITE);
}
}
});
On my activity onResume():
MovementDetector.getInstance().start();
On my activity onPause():
MovementDetector.getInstance().stop();

This code is for walking detection (Modified from #anthropomo code)
to get smoother value.
// initialize
private SensorManager sensorMan;
private Sensor accelerometer;
private float[] mGravity;
private double mAccel;
private double mAccelCurrent;
private double mAccelLast;
private boolean sensorRegistered = false;
// onCreate
sensorMan = (SensorManager) context.getSystemService(Context.SENSOR_SERVICE);
accelerometer = sensorMan.getDefaultSensor(Sensor.TYPE_ACCELEROMETER);
mAccel = 0.00f;
mAccelCurrent = SensorManager.GRAVITY_EARTH;
mAccelLast = SensorManager.GRAVITY_EARTH;
sensorMan.registerListener(this, accelerometer,
SensorManager.SENSOR_DELAY_NORMAL);
sensorRegistered = true;
// onSensorChanged
private int hitCount = 0;
private double hitSum = 0;
private double hitResult = 0;
private final int SAMPLE_SIZE = 50; // change this sample size as you want, higher is more precise but slow measure.
private final double THRESHOLD = 0.2; // change this threshold as you want, higher is more spike movement
#Override
public void onSensorChanged(SensorEvent event) {
if (event.sensor.getType() == Sensor.TYPE_ACCELEROMETER) {
mGravity = event.values.clone();
// Shake detection
double x = mGravity[0];
double y = mGravity[1];
double z = mGravity[2];
mAccelLast = mAccelCurrent;
mAccelCurrent = Math.sqrt(x * x + y * y + z * z);
double delta = mAccelCurrent - mAccelLast;
mAccel = mAccel * 0.9f + delta;
if (hitCount <= SAMPLE_SIZE) {
hitCount++;
hitSum += Math.abs(mAccel);
} else {
hitResult = hitSum / SAMPLE_SIZE;
Log.d(TAG, String.valueOf(hitResult));
if (hitResult > THRESHOLD) {
Log.d(TAG, "Walking");
} else {
Log.d(TAG, "Stop Walking");
}
hitCount = 0;
hitSum = 0;
hitResult = 0;
}
}
}

I have been working with a similar idea to measure the displacement of the phone. I have found that the LINEAR ACCELERATION (and ACCELERATION) are not accurate enough to correctly measure the displacement.
This code should work a little better:
(ititialize)
private SensorManager sensorManager;
private Sensor accelerometer;
double[] maxAccelerations = new double[3];
double[] position = new double[3];
long[] times = new long[3];
// time combined with maxAcceleration can approximate the change in position,
// with the formula Δpos = (maxAcceleration * time ^ 2) / 6
long currentTime;
(onCreate)
sensorManager = (SensorManager) getSystemService(SENSOR_SERVICE);
if (sensorManager.getDefaultSensor(Sensor.TYPE_LINEAR_ACCELERATION) != null) {
accelerometer = sensorManager.getDefaultSensor(Sensor.TYPE_LINEAR_ACCELERATION);
sensorManager.registerListener(this, accelerometer, sensorManager.SENSOR_DELAY_FASTEST);
}
currentTime = System.currentTimeMillis();
for(int i=0;i<3;i++){
times[i]=currentTime;
}
else{
throw "Error";
//Which will throw an error, if not the error that is expected. 😉
}
(onSensorChanged and onAccuracyChanged)
#Override
public void onAccuracyChanged(Sensor ignore, int thisFunction) {
}
#Override
public void onSensorChanged(SensorEvent event) {
if (event.sensor.getType() == Sensor.TYPE_LINEAR_ACCELERATION) {
for(int i=0;i<3;i++){
if(Math.abs(event.values[i])<0.01){
// Note: this is to try to prevent accelerating time from being counted when the phone is stationary. 0.01 should be
// changed to an appropriate sensitivity level that can be calculated by finding an average noise level when the phone is stationary.
times[i]=System.currentTimeMillis();
}
if(event.values[i]>maxAccelerations[i] && maxAccelerations[i]>=0){
maxAccelerations[i]=event.values[i];
}
else if(event.values[i]<maxAccelerations[i] && maxAccelerations[i]<=0){
maxAccelerations[i]=event.values[i];
}
else if(event.values[i]>0 && maxAccelerations[i]<0){
currentTime = System.currentTimeMillis();
position[i]+=maxAccelerations[i] * (times[i]-currentTime)*(times[i]-currentTime) / 6;
times[i]=currentTime;
maxAccelerations[i]=event.values[i];
}
else if(event.values[i]<0 && maxAccelerations[i]>0){
currentTime = System.currentTimeMillis();
position[i]+=maxAccelerations[i] * (times[i]-currentTime)*(times[i]-currentTime) / 6;
times[i]=currentTime;
maxAccelerations[i]=event.values[i];
}
}
}
}

While I don't have demo code (since you aren't specific enough), a good start is here: http://developer.android.com/guide/topics/sensors/sensors_motion.html (and other items on the left).

if you are trying to find the displacement of your phone, you need to find the
Linear acceleration acting on your phone rather than the acceleration due to gravity
android has a built in converter to find the LINEAR ACCELERATION acting on your mobile phone
https://github.com/yuvaramsingh94/AndroidSensorTestCode/tree/master
this is a code where you can see how to get the raw value of LINEAR ACCELERATION

How to detect shake event with android?

How can I detect a shake event with android? How can I detect the shake direction?
I want to change the image in an imageview when shaking occurs.

From the code point of view, you need to implement the SensorListener:
public class ShakeActivity extends Activity implements SensorListener
You will need to acquire a SensorManager:
sensorMgr = (SensorManager) getSystemService(SENSOR_SERVICE);
And register this sensor with desired flags:
sensorMgr.registerListener(this,
SensorManager.SENSOR_ACCELEROMETER,
SensorManager.SENSOR_DELAY_GAME);
In your onSensorChange() method, you determine whether it’s a shake or not:
public void onSensorChanged(int sensor, float[] values) {
if (sensor == SensorManager.SENSOR_ACCELEROMETER) {
long curTime = System.currentTimeMillis();
// only allow one update every 100ms.
if ((curTime - lastUpdate) > 100) {
long diffTime = (curTime - lastUpdate);
lastUpdate = curTime;
x = values[SensorManager.DATA_X];
y = values[SensorManager.DATA_Y];
z = values[SensorManager.DATA_Z];
float speed = Math.abs(x+y+z - last_x - last_y - last_z) / diffTime * 10000;
if (speed > SHAKE_THRESHOLD) {
Log.d("sensor", "shake detected w/ speed: " + speed);
Toast.makeText(this, "shake detected w/ speed: " + speed, Toast.LENGTH_SHORT).show();
}
last_x = x;
last_y = y;
last_z = z;
}
}
}
The shake threshold is defined as:
private static final int SHAKE_THRESHOLD = 800;
There are some other methods too, to detect shake motion. look at this link.(If that link does not work or link is dead, look at this web archive.).
Have a look at this example for android shake detect listener.
Note: SensorListener is deprecated. we can use SensorEventListener instead. Here is a quick example using SensorEventListener.
Thanks.

Google helps a lot.
/* The following code was written by Matthew Wiggins
* and is released under the APACHE 2.0 license
*
* http://www.apache.org/licenses/LICENSE-2.0
*/
package com.hlidskialf.android.hardware;
import android.hardware.SensorListener;
import android.hardware.SensorManager;
import android.content.Context;
import java.lang.UnsupportedOperationException;
public class ShakeListener implements SensorListener
{
private static final int FORCE_THRESHOLD = 350;
private static final int TIME_THRESHOLD = 100;
private static final int SHAKE_TIMEOUT = 500;
private static final int SHAKE_DURATION = 1000;
private static final int SHAKE_COUNT = 3;
private SensorManager mSensorMgr;
private float mLastX=-1.0f, mLastY=-1.0f, mLastZ=-1.0f;
private long mLastTime;
private OnShakeListener mShakeListener;
private Context mContext;
private int mShakeCount = 0;
private long mLastShake;
private long mLastForce;
public interface OnShakeListener
{
public void onShake();
}
public ShakeListener(Context context)
{
mContext = context;
resume();
}
public void setOnShakeListener(OnShakeListener listener)
{
mShakeListener = listener;
}
public void resume() {
mSensorMgr = (SensorManager)mContext.getSystemService(Context.SENSOR_SERVICE);
if (mSensorMgr == null) {
throw new UnsupportedOperationException("Sensors not supported");
}
boolean supported = mSensorMgr.registerListener(this, SensorManager.SENSOR_ACCELEROMETER, SensorManager.SENSOR_DELAY_GAME);
if (!supported) {
mSensorMgr.unregisterListener(this, SensorManager.SENSOR_ACCELEROMETER);
throw new UnsupportedOperationException("Accelerometer not supported");
}
}
public void pause() {
if (mSensorMgr != null) {
mSensorMgr.unregisterListener(this, SensorManager.SENSOR_ACCELEROMETER);
mSensorMgr = null;
}
}
public void onAccuracyChanged(int sensor, int accuracy) { }
public void onSensorChanged(int sensor, float[] values)
{
if (sensor != SensorManager.SENSOR_ACCELEROMETER) return;
long now = System.currentTimeMillis();
if ((now - mLastForce) > SHAKE_TIMEOUT) {
mShakeCount = 0;
}
if ((now - mLastTime) > TIME_THRESHOLD) {
long diff = now - mLastTime;
float speed = Math.abs(values[SensorManager.DATA_X] + values[SensorManager.DATA_Y] + values[SensorManager.DATA_Z] - mLastX - mLastY - mLastZ) / diff * 10000;
if (speed > FORCE_THRESHOLD) {
if ((++mShakeCount >= SHAKE_COUNT) && (now - mLastShake > SHAKE_DURATION)) {
mLastShake = now;
mShakeCount = 0;
if (mShakeListener != null) {
mShakeListener.onShake();
}
}
mLastForce = now;
}
mLastTime = now;
mLastX = values[SensorManager.DATA_X];
mLastY = values[SensorManager.DATA_Y];
mLastZ = values[SensorManager.DATA_Z];
}
}
}

You can also take a look on library Seismic
public class Demo extends Activity implements ShakeDetector.Listener {
#Override protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
SensorManager sensorManager = (SensorManager) getSystemService(SENSOR_SERVICE);
ShakeDetector sd = new ShakeDetector(this);
// A non-zero delay is required for Android 12 and up (https://github.com/square/seismic/issues/24)
int sensorDelay = SensorManager.SENSOR_DELAY_GAME
sd.start(sensorManager, sensorDelay);
TextView tv = new TextView(this);
tv.setGravity(CENTER);
tv.setText("Shake me, bro!");
setContentView(tv, new LayoutParams(MATCH_PARENT, MATCH_PARENT));
}
#Override public void hearShake() {
Toast.makeText(this, "Don't shake me, bro!", Toast.LENGTH_SHORT).show();
}
}

There are a lot of solutions to this question already, but I wanted to post one that:
Doesn't use a library depricated in API 3
Calculates the magnitude of the acceleration correctly
Correctly applies a timeout between shake events
Here is such a solution:
// variables for shake detection
private static final float SHAKE_THRESHOLD = 3.25f; // m/S**2
private static final int MIN_TIME_BETWEEN_SHAKES_MILLISECS = 1000;
private long mLastShakeTime;
private SensorManager mSensorMgr;
To initialize the timer:
// Get a sensor manager to listen for shakes
mSensorMgr = (SensorManager) getSystemService(SENSOR_SERVICE);
// Listen for shakes
Sensor accelerometer = mSensorMgr.getDefaultSensor(Sensor.TYPE_ACCELEROMETER);
if (accelerometer != null) {
mSensorMgr.registerListener(this, accelerometer, SensorManager.SENSOR_DELAY_NORMAL);
}
SensorEventListener methods to override:
#Override
public void onSensorChanged(SensorEvent event) {
if (event.sensor.getType() == Sensor.TYPE_ACCELEROMETER) {
long curTime = System.currentTimeMillis();
if ((curTime - mLastShakeTime) > MIN_TIME_BETWEEN_SHAKES_MILLISECS) {
float x = event.values[0];
float y = event.values[1];
float z = event.values[2];
double acceleration = Math.sqrt(Math.pow(x, 2) +
Math.pow(y, 2) +
Math.pow(z, 2)) - SensorManager.GRAVITY_EARTH;
Log.d(APP_NAME, "Acceleration is " + acceleration + "m/s^2");
if (acceleration > SHAKE_THRESHOLD) {
mLastShakeTime = curTime;
Log.d(APP_NAME, "Shake, Rattle, and Roll");
}
}
}
}
#Override
public void onAccuracyChanged(Sensor sensor, int accuracy) {
// Ignore
}
When you are all done
// Stop listening for shakes
mSensorMgr.unregisterListener(this);

Since SensorListener is deprecated so use the following code:
/* put this into your activity class */
private SensorManager mSensorManager;
private float mAccel; // acceleration apart from gravity
private float mAccelCurrent; // current acceleration including gravity
private float mAccelLast; // last acceleration including gravity
private final SensorEventListener mSensorListener = new SensorEventListener() {
public void onSensorChanged(SensorEvent se) {
float x = se.values[0];
float y = se.values[1];
float z = se.values[2];
mAccelLast = mAccelCurrent;
mAccelCurrent = (float) Math.sqrt((double) (x*x + y*y + z*z));
float delta = mAccelCurrent - mAccelLast;
mAccel = mAccel * 0.9f + delta; // perform low-cut filter
}
public void onAccuracyChanged(Sensor sensor, int accuracy) {
}
};
#Override
protected void onResume() {
super.onResume();
mSensorManager.registerListener(mSensorListener, mSensorManager.getDefaultSensor(Sensor.TYPE_ACCELEROMETER), SensorManager.SENSOR_DELAY_NORMAL);
}
#Override
protected void onPause() {
mSensorManager.unregisterListener(mSensorListener);
super.onPause();
}
Then:
/* do this in onCreate */
mSensorManager = (SensorManager) getSystemService(Context.SENSOR_SERVICE);
mSensorManager.registerListener(mSensorListener, mSensorManager.getDefaultSensor(Sensor.TYPE_ACCELEROMETER), SensorManager.SENSOR_DELAY_NORMAL);
mAccel = 0.00f;
mAccelCurrent = SensorManager.GRAVITY_EARTH;
mAccelLast = SensorManager.GRAVITY_EARTH;
The question with full details could be found here:
Android: I want to shake it

This is for Kotlin and use SensorEventListener
Create new class ShakeDetector
class ShakeDetector : SensorEventListener {
private var mListener: OnShakeListener? = null
private var mShakeTimestamp: Long = 0
private var mShakeCount = 0
fun setOnShakeListener(listener: OnShakeListener?) {
mListener = listener
}
interface OnShakeListener {
fun onShake(count: Int)
}
override fun onAccuracyChanged(
sensor: Sensor,
accuracy: Int
) { // ignore
}
override fun onSensorChanged(event: SensorEvent) {
if (mListener != null) {
val x = event.values[0]
val y = event.values[1]
val z = event.values[2]
val gX = x / SensorManager.GRAVITY_EARTH
val gY = y / SensorManager.GRAVITY_EARTH
val gZ = z / SensorManager.GRAVITY_EARTH
// gForce will be close to 1 when there is no movement.
val gForce: Float = sqrt(gX * gX + gY * gY + gZ * gZ)
if (gForce > SHAKE_THRESHOLD_GRAVITY) {
val now = System.currentTimeMillis()
// ignore shake events too close to each other (500ms)
if (mShakeTimestamp + SHAKE_SLOP_TIME_MS > now) {
return
}
// reset the shake count after 3 seconds of no shakes
if (mShakeTimestamp + SHAKE_COUNT_RESET_TIME_MS < now) {
mShakeCount = 0
}
mShakeTimestamp = now
mShakeCount++
mListener!!.onShake(mShakeCount)
}
}
}
companion object {
/*
* The gForce that is necessary to register as shake.
* Must be greater than 1G (one earth gravity unit).
* You can install "G-Force", by Blake La Pierre
* from the Google Play Store and run it to see how
* many G's it takes to register a shake
*/
private const val SHAKE_THRESHOLD_GRAVITY = 2.7f
private const val SHAKE_SLOP_TIME_MS = 500
private const val SHAKE_COUNT_RESET_TIME_MS = 3000
}
}
Your main Activity
class MainActivity : AppCompatActivity() {
// The following are used for the shake detection
private var mSensorManager: SensorManager? = null
private var mAccelerometer: Sensor? = null
private var mShakeDetector: ShakeDetector? = null
override fun onCreate(savedInstanceState: Bundle?) {
super.onCreate(savedInstanceState)
setContentView(R.layout.activity_main)
initSensor()
}
override fun onResume() {
super.onResume()
// Add the following line to register the Session Manager Listener onResume
mSensorManager!!.registerListener(
mShakeDetector,
mAccelerometer,
SensorManager.SENSOR_DELAY_UI
)
}
override fun onPause() { // Add the following line to unregister the Sensor Manager onPause
mSensorManager!!.unregisterListener(mShakeDetector)
super.onPause()
}
private fun initSensor() {
// ShakeDetector initialization
// ShakeDetector initialization
mSensorManager = getSystemService(SENSOR_SERVICE) as SensorManager
mAccelerometer = mSensorManager!!.getDefaultSensor(Sensor.TYPE_ACCELEROMETER)
mShakeDetector = ShakeDetector()
mShakeDetector!!.setOnShakeListener(object : OnShakeListener {
override fun onShake(count: Int) { /*
* The following method, "handleShakeEvent(count):" is a stub //
* method you would use to setup whatever you want done once the
* device has been shook.
*/
Toast.makeText(this#MainActivity, count.toString(), Toast.LENGTH_SHORT).show()
}
})
}
}
Finally add this code to Manifests to make sure the phone has an accelerometer
<uses-feature android:name="android.hardware.sensor.accelerometer" android:required="true" />

You can use Seismic:
See the code here:
https://github.com/square/seismic/blob/master/library/src/main/java/com/squareup/seismic/ShakeDetector.java

Do the following:
private float xAccel, yAccel, zAccel;
private float xPreviousAccel, yPreviousAccel, zPreviousAccel;
private boolean firstUpdate = true;
private final float shakeThreshold = 1.5f;
private boolean shakeInitiated = false;
SensorEventListener mySensorEventListener;
SensorManager mySensorManager;
Put this in onCreate method.
mySensorManager = (SensorManager) getSystemService(Context.SENSOR_SERVICE);
mySensorManager.registerListener(mySensorEventListener,
mySensorManager.getDefaultSensor(Sensor.TYPE_ACCELEROMETER),
SensorManager.SENSOR_DELAY_NORMAL);
And now the main part.
private boolean isAccelerationChanged() {
float deltaX = Math.abs(xPreviousAccel - xAccel);
float deltaY = Math.abs(yPreviousAccel - yAccel);
float deltaZ = Math.abs(zPreviousAccel - zAccel);
return (deltaX > shakeThreshold && deltaY > shakeThreshold)
|| (deltaX > shakeThreshold && deltaZ > shakeThreshold)
|| (deltaY > shakeThreshold && deltaZ > shakeThreshold);
}
private void updateAccelParameters(float xNewAccel, float yNewAccel, float zNewAccel) {
if (firstUpdate) {
xPreviousAccel = xNewAccel;
yPreviousAccel = yNewAccel;
zPreviousAccel = zNewAccel;
firstUpdate = false;
}else{
xPreviousAccel = xAccel;
yPreviousAccel = yAccel;
zPreviousAccel = zAccel;
}
xAccel = xNewAccel;
yAccel = yNewAccel;
zAccel = zNewAccel;
}
private void executeShakeAction() {
//this method is called when devices shakes
}
public void onSensorChanged(SensorEvent se) {
updateAccelParameters(se.values[0], se.values[1], se.values[2]);
if ((!shakeInitiated) && isAccelerationChanged()) {
shakeInitiated = true;
}else if ((shakeInitiated) && isAccelerationChanged()){
executeShakeAction();
}else if((shakeInitiated) && (!isAccelerationChanged())){
shakeInitiated = false;
}
}
public void onAccuracyChanged(Sensor sensor, int accuracy) {
//setting the accuracy
}

Dont forget to add this code in your MainActivity.java:
MainActivity.java
mShaker = new ShakeListener(this);
mShaker.setOnShakeListener(new ShakeListener.OnShakeListener () {
public void onShake() {
Toast.makeText(MainActivity.this, "Shake " , Toast.LENGTH_LONG).show();
}
});
#Override
protected void onResume() {
super.onResume();
mShaker.resume();
}
#Override
protected void onPause() {
super.onPause();
mShaker.pause();
}
Or I give you a link about this stuff.