I am trying to detect if my app became active from multi-tasking and display a dialog.
The use-case is something like this: User is using the app -> Hits the home button -> Does something -> User taps on the app again
As expected, the last activity the user was on is being shown.
I want to display a dialog when this happens. I used onRestart() for the same and it works. Only problem is, even when the user goes to some activity in the app and then hits back, the dialog is being displayed.
I went through the activity lifecycle several times, but couldn't figure out the solution. Any ideas?
Well, you can tell the foreground application using the technique outlined in Determining the current foreground application from a background task or service: look for getForegroundApp. You could run a timer that checks periodically to see if the app is foreground, and if its not then set a variable after a suitable delay (to make sure you don't happen to hit it in the wrong order when switching Activities). Clear the variable in onStart, and if onCreate of the rooth Activity is ever called you know that the app just became Active.
I achieved this by setting a flag in Shared Preferences in onStop() and cleared it in onDestroy().
Then I overrided the Back button to clear the flag whenever it is pressed. This solves the problem I had stated.
Now in onRestart(), if the flag is true.... I display the dialog.
I know it is not the most elegant solution but does the job! Hope this helps somebody.
Related
When a user enters an activity on my app I want to perform some logic during onStart and possibly launch a second activity before letting the user see the first activity (think of this as a pin protected activity)
I have a small issue where the contents of the first activity are shown for a second before the second activity is started. This happens when the user uses the home button to get out and in to the app. Is there a way to prevent the first activity to be visible at all before performing the logic validation?
This is more of a "design" solution to your problem and not clear if it'll work for you. I had something similar in the app I'm working on. What I did instead, was to create an interstitial Activity that resembled the same starting state (i.e. not yet completely loaded) of the Activity (Pin-protected Activity in your case) that is about to be started. Once I'd made my appropriate decision about whether or not I could go on, I just navigated to that initial Activity. In your case, I could see you making the decision on this interstitial Activity, and then navigating to the Pin-protected Activity or to the other one if conditions were not met properly.
The only downside to this approach is that the app does a quick flash with the additional Activity, but I think the increased separation of logic is worth it.
I am running into problems where if a user navigates through several child activities without returning to the MainActivity in between, when they press the back button it closes to the Android Home screen. I never call finish() on my MainActivity, it doesn't happen consistently, and not from the same screens. It happens when I have gone through many different Activities without returning to the MainActivity.
I'm assuming that the system is terminating the Activity while its in the background, but I'm not sure. Is there anyway to ensure that my parent activity doesn't get terminated?
I did not create the project. I'm aware that the navigation structure he used isn't right, but as of right now I'm not in the position to fix it.
Please do not tell me to do things a different way. I am asking only if there is a way to keep a particular activity from being terminated by the system.
While it's not possible to stop your activity from being destroyed, you can check if there's no activities in the backstack, and restart your MainActivity when the back button is pressed in this particular case.
You could try to put a handler in it that doesn't do anything besides giving itself another task (which is to give itself another task) every few seconds.
I'm making a simple e-book reader app, and an activity can be called by many cases.
I'd like to distinguish callee activity to know its origin action in case of
From my another activity: this can be easily solved by
StartActivityForResult from calling activity.
Called by back button click from other package app after share action ("whoops, I missed to click share button, and then back.").
Switched by user's multitasking choice.
Called by user click at the start screen: this might be known by MAIN entry point at the android manifest.
How to know above cases?
I have no idea why you would need to do this but...
1.From my another activity: this can be easily solved by StartActivityForResult from calling activity.
Yes, as long as the calling Activity is your own as you can't guarantee any 3rd-party code will use startActivityForResult(...). You can, however, use getCallingPackage() and getCallingActivity() in other cases.
2.Called by back button click from other package app after share action ("whoops, I missed to click share button, and then back.").
When the user presses the BACK button your Activity isn't being "called" - it's simply being resumed or re-started. The original calling app/Activity/method will still hold true - there is no way to ascertain that this has happened as the normal Activity life-cycle methods (onStart() and onResume()) are always called even when an Activity is first created.
3.Switched by user's multitasking choice.
If you mean using the "Recent" apps view, the same applies for my answer to 2. above.
4.Called by user click at the start screen: this might be known by MAIN entry point at the android manifest.
In this case onCreate() will be called although if your Activity is simply stopped for whatever reason, it may simply be restarted depending on the launch mode you use.
In short, I can't see you being able to gather much in the way of any accurate information as to how your Activity becomes active.
I am not too sure about the actual way for the above question as I am too a new guy in android.
But to the best of my knowledge... called by back button and switched by user's multitasking leads the activity to enter pause state.
So you can access it from "onPause" method in your activity.
I have an Activity that should only get created once. That is, onCreate can only be called once. If it's called again, I want the Activity to do nothing.
Is it advisable to do the following?
protected void onCreate(Bundle savedInstanceState) {
this.setTheme(android.R.style.Theme_Translucent_NoTitleBar_Fullscreen);
super.onCreate(savedInstanceState);
if(onCreateWasCalledAlreadyBoolean) {
setResult(RESULT_OK);
finish();
return;
}
//Do other stuff here
}
I assume you understand how the activity life cycle works. I mean, you are not trying to avoid something that does not apply here (thinking that onCreate may be called multiple times whenever it just onRestarts etc.).
Technically, it's perfectly fine.
However, you should be worrying more about why you need to call your activity ("A") again if it shouldn't be created at all, if that's what you're thinking.
If you've caught yourself checking if your activity A was already "called" (?), this could mean the previous activity ("B") has a mistake in the logic flow of the app, and that B instead should be checking if it must in fact start that activity A. I mean, if you need to decide if you must call an activity, check before starting it.
I don't think that's applicable if you're restarting the activity (e.g.: go Home, then navigate back), but then again you should be restarting it from where you left (B for what I can tell). You won't be navigating back to A. And you didn't give much detail, so I'd guess this is some kind of splash screen, like evilmage93 said.
If that's indeed some kind of splash screen, I would advise to show it whenever the user navigates back all the way to remove your app from the task stack (contrary to his advice). In other words, whenever the user restarts the app from its "front door".
Although that's ultimately a design decision, I prefer to see the splash screen whenever the app is being loaded ("entered") in the stack for the first time, and it should work fine if you (obviously) finish A before calling B (the splash screen is supposed to finish itself when done, even in its first run). It's a matter of consistency: the same app should behave the same way whenever the user performs the same task (start app from its "front door").
Still, I answered your question covering some general aspects because you asked in such way.
// edited:
Finally, by looking at that onCreateWasCalledAlreadyBoolean I'm afraid you may be trying to reinvent part of the activity life cycle mechanism. In this case, don't: proceed with your regular activity logic because the user expects that behavior. Generally I wouldn't advise people to break the normal loading of an activity just because it was killed and restarted by the system.
I don't see why not. Wouldn't it be simpler to not restart the activity at all though?
What are you worried about NOT being okay? Performance..Uncaught exceptions..Code clarity?
My app is retaining all of the variable values when it closes and this is effecting how it runs when reopened. Is there any way to reset them all upon app close? or is there a way to clean the app from memory when it is closed so to speak? For the moment I have just been setting all of the important variables "=0" in the last few lines of execution but I know there must be a correct way to doing this.
EDIT:
OK I thought that it would just be easier to reply here instead of individually to everyone.
The app is indeed staying alive in the background, I checked with advanced task killer. How would I get the ap to "Die" by presing the back button? I think this would be the easiest solution given how the app works:
open app > press start button > press stop button > results screen > press back button to exit.
so basically each time the app runs should be an independant execution.
Override the onPause, onResume, and onDestroy methods. onPause should save anything upon pausing, onResume should reload these values when it is resumed, and onDestroy will be called when your app closes. You can clean up stuff in onDestroy. See this link.
You app is probably not closing but remaining in background. Check advanced task manager and see if the app is running or not.
You need to familiarize yourself with the Activity Lifecycle.
You could leverage onResume() to reset your variables; also note onDestory() and onPause().
UPDATE:
Killing the application in its entirety each time the app moves to the background is an anti-pattern. You should really look at your application and follow the aforementioned activity lifecycle pattern and take the needed steps to insure your variables exist as you desire based on state.
I like what #Alex and #Jack said. To add to that, also consider that you can call finish() in your Activity if you want to force it to close up and return to the last Activity. Going along with this, also consider the use of setResult(int) (JavaDoc Here)
You can also set a flag on the Intent when you call the Activity you are questioning about. A flag like FLAG_ACTIVITY_NO_HISTORY could be helpful:
If set, the new activity is not kept in the history stack. As soon as the user navigates away from it, the activity is finished. This may also be set with the noHistory attribute.
List of Intent Flags
Uninitialized variables are bad. Don't do it. ALWAYS manually reset variables before using them for the first time.
the onResume() method will let you reset the variables when the program resumes, but will also do it when you return to the activity unless you add the logic that says you are coming from in the app, not the home page. Maybe onRestart() is what you really need? I'm not positive, but it's possible with onResume.