Develop Reference

Live streaming using wowza server with bluetooth mike

I need to stream audio from external bluetooth device and video from camera to wowza server so that I can then access the live stream through a web app.
I've been able to successfully send other streams to Wowza using the GOCOder library, but as far as I can tell, this library only sends streams that come from the device's camera and mic.
Does anyone have a good suggesting for implementing this?

In the GoCoder Android SDK, the setAudioSource method of WZAudioSource allows you to specify an audio input source other than the default. Here's the relevant API doc for this method:
public void setAudioSource(int audioSource)
Sets the actively configured input device for capturing audio.
Parameters:
audioSource - An identifier for the active audio source. Possible values are those listed at MediaRecorder.AudioSource. The default value is MediaRecorder.AudioSource.CAMCORDER. Note that setting this while audio is actively being captured will have no effect until a new capture session is started. Setting this to an invalid value will cause an error to occur at session begin.

RTSP 1080p live-streaming android client gets error (100,0)

My new surveillance camera just arrived, so I'm trying to write an app to live stream the video from it.
Since it came with basically no documentation, I installed the 'onvifer' android app which allows you to browse the camera's capabilities. This app works fine - gets the video and allows PTZ controls, etc. It reports the streaming url as:
rtsp://192.1.0.193:554/mpeg4
I tested the stream in the VLC windows client, and it's able to stream video from that URL as well. This makes me comfortable that the network is working OK.
The camera states the feed will be 1920x1080; VLC confirms this.
The basic code in my activity:
VideoView videoView = (VideoView)this.findViewById(R.id.VideoView);
videoView.setVideoURI(Uri.parse("rtsp://192.1.0.193:554/mpeg4"));
videoView.requestFocus();
videoView.start();
I've also given the app INTERNET permissions in AndroidManifest.xml, disabled authentication on the camera, and am running on a real device (not the emulator).
When I run the app, LogCat shows this immediately:
setDataSource IOException happend :
java.io.FileNotFoundException: No content provider: rtsp://192.1.0.193:554/mpeg4
at android.content.ContentResolver.openTypedAssetFileDescriptor (ContentResolver.java).
About 15 seconds later, the app shows a "Can't play this video" modal dialog box and this is added to LogCat:
MediaPlayer error (100, 0)
AudioSystem AudioFlinger server died!
MediaPlayer error (100, 0)
VideoView Error: 100,0
I've googled everything I can think of, but haven't found anything useful.
Any thoughts?

wild-ass-guess on your logcat and the RC=100... No SDP file or no equivalent for RTSP of the 'moov atom' block required to negotiate details of the stream /container/ codec/ format... You can get the AOSP code for mediaPlayer/videoView and grep the RC value in the source.
RTSP is gnarly to debug ( note the tools links ) and not assured to run inside a NAT'd network due to UDP issues. So, to get better result, you may have to look into forcing your config to do data channel on TCP an not UDP. Or it could be other issues , of which there are many.
If you really want to investigate, some possible tools below:
Use command line and CURL client to request your stream:
Android - Java RTSP Session Mgmt package on Git
Protocol dumps for CLI RTSP sessions to Youtube RTSP/SDP streams
To pursue the issue, you may need to get into the weeds with debug tools that track details of the protocol negotiation that preceeds the MediaPlayer actually starting play on the stream. That would include learning the RFP and the protocol details.

videoView.setVideoURI(“rtsp://192.1.0.193:554/mpeg4”);
Try your app on another phone.
You may find the problem is about the mobile device.
Try this
path:"rtsp://218.204.223.237:554/mobile/1/4C024DFE77DC717D/onnuvesj43xj7t26.sdp".
See whether the code has something wrong.

How to decode the H.264 video stream received from parcelfiledescriptor

I'm creating an Android application of live video streaming between two android phone. I've already established a socket connection between these devices. I'm capturing video in one device and send the stream to other device but currently I just want to save in the receiver side mobile device and save it. I'm recording using MediaRecorder in one device , so to stream to the receiver I,m using parcelfiledescriptor object by setting the data
Client side code
mediaRecorder.setAudioSource(MediaRecorder.AudioSource.CAMCORDER);
mediaRecorder.setVideoSource(MediaRecorder.VideoSource.CAMERA);
mediaRecorder.setOutputFormat(MediaRecorder.OutputFormat.MPEG_4);
mediaRecorder.setAudioEncoder(MediaRecorder.AudioEncoder.AMR_NB);
mediaRecorder.setVideoEncoder(MediaRecorder.VideoEncoder.H263);
mediaRecorder.setOutputFile(pfd.getFileDescriptor());
Receiver side code
pfd= ParcelFileDescriptor.fromSocket(s);
InputStream in = new FileInputStream(pfd.getFileDescriptor());
DataInputStream clientData = new DataInputStream(in);
OutputStream newDatabase = new FileOutputStream(file);
int available=in.available();
byte[] buffer = new byte[available];
int length;
while((length = in.read(buffer)) > 0)
{
newDatabase.write(buffer, 0, length);
}
newDatabase.close();
The video file is being created on the receiver side mobile, but it's not able to receive any bytes. So Do I've to decode the coming stream on the receiver side since the video stream sent is encoded while recording. So how can I decode the stream that is received ? I found some solution like MediaExtractor and MediaCodec...but will this work with live video capturing and moreover I'm testing on android version 2.3.6 GingerBread
Is it possible to decode the video stream from MediaCodec for version 2.3.6 or some other method is available ?

The video file is being created on the receiver side mobile, but it's not able to receive any bytes.
If I understand you right, you are getting no data from the socket. That is a separate problem, which has nothing to do with the video format, decoding or encoding.
To debug your sockets, it may be helpful to use a separate application which just dumps the recieved data. Once the data looks fine, you can go to the next step - decoding the video.
Second part of the problem is the video format. You are using mp4, which is not usable for streaming. Here is more info about the format structure. You can use mp4 to record a video into a local file and then transfer the whole file over socket somewhere, but true realtime streaming cannot be done because of the non-seekable nature of the socket (as described in the linked article). There is a block of metadata at the beginning of the file, which acts as a "table of contents" and without it, the previous data are just junk. The problem is, you can assemble a "table of contents" only after you got all the contents. But at that moment, the data was already sent through the socket and you cannot insert anything at its beginning.
There are few walkarounds, but that's just for your future research and I haven't used them yet.
The most intuitive way would be to switch from mp4 to mpeg-ts, a container designed for streaming. Take a look at a hidden constant in MediaRecorder.OutputFormat with value 8.
Another option is to pack the raw H.264 data into RTP/RTCP packets, which is again a protocol designed for streaming. Also your application would be able to stream to any device that support this protocol (for example a PC running VLC). To further reasearch, take a look at Spydroid IP camera, which does exactly the thing.

Unexpected noise when using audiotrack + audiorecord class in android

I am doing an Android IP phone application with android 2.1 version.
My application is to provide a simple ip phone function.My program consist of a listener thread which receive command and poll user to start the call.
The audiotrack class will receive audio data and playback
while it will record audio data with audiorecord and stream it out to the other side.
When there is only one user streaming to another, the sound quality is good.However, when the receiver side also start record and stream, both side ear weird sound and loud noise.But still both sides can hear what the others said.
Is it not suitable for using audiotrack and audiorecord class on the same side?I cannot figure out the problem. Can anyone suggest any solution?

Take screenshot of a video stream I am not watching

I am doing an android application where I want to show a screenshot of a video stream I am not receiving in order for the user to decide if he is going to switch or not to that stream.
I am using VLC to stream the videos and VLC remote control interface to control it via telnet and command it to take *snapshot*s but I can't do a snapshot of a video I am not watching,
is there a way around this?

I found a way to do it but i have to be receiving the stream as ee said, thanks :)
cvlc $CHANNEL_URL --rate=1 --video-filter=scene --vout=dummy --aout=dummy --scene-format=$FORMAT --scene-ratio=24 --scene-prefix=$PREFIX --scene-path=$SNAPSHOT_PATH --scene-width=$WIDTH --scene-replace vlc://quit &