I recently bought LG G3 and I have enabled debugging mode but Eclipse is still not recognizing it, back when I used the Galaxy S3 for development I had to install Samsung Kies. The G3 drivers are installed and I can see it in My Computer, do I need something like the Kies but for the LG? If so can someone please post a link for that?
See update below
I found the answer that worked for me.
When you plug in the phone, bring down the status shade, pick the USB item ("USB connected") then, from there, pick "Internet connection" -- I chose Ethernet, but I'm not sure the choice matters on the dialog that pops up..
This enables USB debugging to become active; leaving it on Charging, MTP, or PTP does not work.
Once you do this, you can follow #Siddharth's steps to setting the ADB drivers, if needed. (You may need to use the actual LG drivers and not the Google drivers, but once I got this far, it was just like any other phone.)
Caveat
For me, even after going through this once, I still get the "installer" first and then have got go in and choose the "Internet connection" again. But, at least it works.
Update 10 Dec 2014
A recent firmware update has, indeed, removed the "Internet connection" as an option. Instead, PTP now works. I still get the "Connected as an installer" notification every time I plug in the phone and have to click on the notification then click on "Camera (PTP)" -- or wait about a minute. It's slightly better than what It was.
Also note: When this change occurred I had to install the drivers again for the phone, since it comes up as a different type of device when "Camera (PTP)" is chosen than when I used the "Internet connection" option.
For me, this has solved the problem: simply go to LG's website, http://www.lg.com/us/support/software-manuals, select the model (I have selected 'D850') and go to Software Updates tab where you can download the driver. I have installed it and then Eclipse recognized my device. I'm working on Windows 8.1, by the way.
yakobom
After a lot of searching and trying all solutions still I couldn't connect my LG G3 to eclipse on mac. Finally I find this solution, it works for me hope for you works too:
Install LG USB driver for mac
Go and enable developer mode in your G3 (Setting->About phone (in General Tab)--> Software information --> Tap 8 times on Build Number) then you will see the message which says the Developer option is enabled
In this step you expect that after connecting your mobile via USB cable, the Eclipse detect it
But for me it didn't happen
in this step you need to go (Setting--> Developer Options--> and turn off this option from above green (on/off) switch then again switch on this option from same place (If you don't do this step the "USB Debugging" mode will stay fray and you can not enable it)
In Developer Options menu scroll down until find the "USB Debugging" then tic it and enable it.
almost finished , you should back and configure running mode for your application and see the G3 in your connected usb devices
Try this solution :
Right click on My Computer --> Properties --> Device Manager
Right Click on your device --> Update driver software
Click on "Browse my computer for driver software"
Give path of your android sdk like "D:\Android_Sdk\sdk\extras\google\usb_driver" and tick "Include subfolders"
Click
Now repeat the steps till "Browse my computer for driver software".
Then click on "Let me pick form list of device drivers on my computer". Click on the first option and click next and then click yes. Drivers will be installed for your device.
Hope this helps.
Change the USB mode to PTP and you will get the RSA prompt.
Within the prompt, select allow it > ok and you are done.
This worked for me when I had the same problem on a Mac computer.
To contribute to possible solutions for this fix: I am using an LG G3 on a Mac.
In my case, ADB saw it as a device when I checked, and the Mac showed the device information in the System Information window, yet Eclipse did not see it. I also did not get the RSA confirmation pop-up when I connected the device through USB.
To fix, with my G3 connected, I selected the USB PC Connection (either from the navigation bar or through the settings) and changed it to be Send Images (PTP). Once this was on, I was given the RSA pop up and Eclipse recognized the phone in the Run Configurations window.
If you have this problem on Ubuntu; here is what I did to get it working:
Switch to PTP from MTP on the phone (this assumes you're connected via USB)
Disconnect the USB cable
Go to settings -> developer options and select revoke usb authorizations then ok
Make sure USB Debugging is checked
Reconnect the USB cable and your phone will say its connected as an installer; wait a minute or three and debugging mode should appear on the status bar (on the phone)
Open Eclipse and go to DDMS
Select "reset adb" in the dropdown if your phone isn't appearing yet
Working on Windows 7. All of the solutions from other sites didn't help (i.e. restarting adb and switching between MTP, PTP, Charing). In the end, I found this article (http://www.technobuzz.net/install-lg-g3-lg-drivers-windows-mac-usb-adb/), which contains links for the necessary drivers for the lg g3 (and some others I think). This did the trick and made the RSA key fingerprint dialog appear finally. After confirming, adb and eclipse recognize my device perfectly!
I had this buggy error with my LG Optimus L3 phone connecting to Win7/8 machines!
Cause: Device Driver was missing as it seemed at the end when I fixed it!
How to Fix:
Search through web (using Google) "LG < Your_Phone_Model Number > Drivers Download".(Ex.:- Go to About phone in your settings list > Model Number, for me it's LG-E400f)
Mostly the first few links are related to the required Device Driver download page.(Ex.:- for me I got the following link and for each device driver LG or most of the other vendors/manufactures have that kind of a Manuals and Drivers Page) Visit that page mentiioning about software update and drivers downloads.
Scroll down to the section of "Manuals and Software Update" and doing just the Step 1 was enough for me, which is "Install the USB DRIVERS "
Download it(for Mac or Windows) > Install It > Check Your Eclipse ADT > and it should be visible under Devices tab by now
Cheers!!!
Hope this helps to someone else to clearly get to the solution!
it seems that Eclipse shows the offline mode for lg G3 and some newer devices
and there is no way no use these devices for ADB debugging
there is a way
I am using windows 10
1- download this 11 MB file < http://dl2.uncox.com/android/upload/platform-tools-v22.zip>
2- then go to the directory that you installed the SDK
3- extract the zip file in to the platform-tools folder , override all files(click yes to all) be sure that Eclipse doesn't running
4- open Eclipse and select your android device that stands in devices tab at the right-top corner of your screen and then you can see the arrow near the screen- capture icon and you will find the reset-ADB. click on it ,after that your phone will ask you to allow android debugging for your device click on it
5- congratulations .now you can see that your device shown online
i hope this will help .sorry for my english
I also had a great deal of trouble when attempting to debug android applications on my shiny new LG G3. What ended up working for me was first installing the default google drivers onto the G3 and then following the process detailed by #lilbyrdie.
The process of installing the google usb drivers is very nicely gone through here.
However, with the most recently pushed android update to the G3 there are no longer the options for internet connection or charge only; but they seem to have fixed this defect forcing you to make this odd choice to enable debugging. The only options remaining are MTP and PTP, but if you pull down the notification drawer, choose the 'USB connected' notification (assuming the device is connected to your computer via USB of course) and from there click on 'Media sync (MTP)' even if it is already selected then debugging should be enabled.
Android can't update on the fly the developer mode. So, after turning on developer mode (and given you have the latest driver) switch the green button(under settings->general->developer options) to off and then back on. Then turn debug mode on (after that windows recognizes a new device) and you should be good to go.
In my solution for Windows 7 was helpful to update Android SDK Tools to latest version.
ADB Single/Composite values for LG G3 phones -
I found it was necessary to update (~userName/.android/)adb_usb.ini file with the line 0x1004:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x2207
0x1004
In addition, I needed to add the following entry in (.../sdk/extras/google/usb_driver/)android_winusb.inf:
;
; Android WinUsb driver installation.
;
...
[Google.NTx86]
...
;LGE Android Phone
%SingleAdbInterface% = USB_Install, USB\VID_1004&PID_633E
%CompositeAdbInterface% = USB_Install, USB\VID_1004&PID_631D&MI_00
%CompositeAdbInterface% = USB_Install, USB\VID_1004&PID_631D&MI_01
[Google.NTamd64]
...
Oh, and set USB to PTP as well as turn-on USB debugging.
When you're all done with the file modifications and several passes at installing the drivers (ref. earlier posts), you can verify your phone is ready via the Device Manager. It will list your phone as "Android Device"->"Android Composite ADB Interface". I believe an earlier post explains setting up the drivers
Related
Suddenly my Android Studio stopped detecting all my devices, none of them is working. It happen from one execution to another. I've changed a few lines of code (1 min maybe?), hit run (instant run) and then I missed all my devices.
I'm using a Mac and as devices: Nexus 5x, Galaxy s6 and Oneplus One. What can be happening? I've checked previous questions here and tried all this:
Run configurations: no matter if I chose usb device or show the window, it does not work.
Tools > Android > Enable ADB integration: didn't help
Command line adb devices does not detect any either.
I've revoked and granted again USB authorizations. Still not working.
I've tried other apps I have, none work.
Restarted phones
Restarted android studio
Restarted computer
(Note: if I start an emulator it works, but I'd prefer to use physical device since I have to scan real barcodes)
Thanks a lot in advance.
On Lollipop 5.1
Go to About Phone
Click 7 times on Build Number. Now Developer options are enabled
Go back and Click Developer options
Enable USB debugging under Debugging.
Well, I've fixed. The problem in case any faces the same was a Stetho (http://facebook.github.io/stetho/) tab in chrome, the one you open by typing: chrome://inspect/#devices not sure about the reason because it's been open for 2 days now, but it was the cause, once I closed it, it worked.
Found this unaccepted answer here: macbook adb cannot open interface That for sure should be accepted.
EDIT: I've been able to replicate the problem. It happens when you have the devices tab open and try to run a second app that has stetho configured.
It happens if your device drivers not installed Please do this.
In Case of PC
Right click my computer select manage select device manager from left panel if your phone drivers not installed there will be yellow alert on driver right click on it select update driver software then select search automatically for update driver software.
Other
Please install the missing drivers of your phone.
I had the same problem . What I've done to solve it going to Setting >> Additional Setting >> Developer Option
Now select:
Developer option on
USB debugging on
Install via USB on
USB setting security on
Verify apps over USB
OK, what finally worked for me was to go into Settings\Developer options\Select USB Configuration and change it to PTP or MIDI....either one of those worked for me and all of the sudden my phone showed up and I was able to see and run my test app on my android phone.
This woorked for me
Go To Settings
Developer Options
Enable USB Debugging
Enable Verify Apps over USB
Select USB Configuration: Choose MIDI
I hope it also works for you
I tried to play Android Studio 2.0 with my mobile without success, what I did are:
In my mobile, Apps/gear icon/Settings/SYSTEM/{} Developer options/ Android debugging/, enable the Android Debug Bridge(adb) interface (set tick).
After plug in my mobile to my PC with a USB cable, I found A0001 in my Computer folder. Within A0001, I can see the files in my mobile.
In my PC, run Android Studio/bin/studio.exe, "Select Deployment Target" window shows with message "No USB devices or running emulators detected"
I have tried two different USB drivers but got no lucky.
Perhaps I should tell Android Studio where is my USB driver? But, how?
Can you help?
I had the same problem too and I managed to resolve it this way.
First, enable debugger mode in your android device.
Go to Device Manager from Start Menu and try to find ADB Interface with an error symbol on it. This generally happens because windows sometimes fail to load all the mobile device drives.
Next, Go to http://adbdriver.com/downloads/ and download the driver installer, unzip and run it.
Now go to Android Studio and you should find that everything is working fine.
Chill....
same here... but I hope you can avoid this problem the same way I Did.
There is an "universal ADB Driver for all Android Devices".
Yep... sounds like magic.
Just follow this link.
https://devs-lab.com/usb-adb-drivers-for-all-android-devices.html
Fun fact there is no "Step 5" in that article so I'll give you.
you have to enable "USB Depuration" from "Developer Options" connect your cellphone to computer as a "MTP storage" , after windows detected your cellphone as a "Portable Device" Execute ADBDriverInstaller.exe (that downloaded from devs-lab)
check the device list and your cellphone will say "Driver incorrectly", select your cellphone and press install.
Step 6: Once the process is completed, you’ll see something like the image that appears there (in the link).
I hope that somebody else work this
Go to Run > Edit Configurations...
Under Deployment Target Options select Show Device Chooser
Dialog from the drop-down-list
See picture for reference
After struggling with this problem for a while, I found that there are certain cables that can only charge your phone, and even though they seem to be working, they do not allow your phone to be used as a "Media Device" and therefore Android Studio does not detect it.
Go to
Tools | Android | Enable ADB Integration
Make sure it's enabled. When I upgraded to 2.X it was for some reason disabled for me and it took me hours to find it.
I just cannot beleive why it is so difficult! let me try again and please check my steps again:
I installed Android Studio 2.0, then run Computer/OS(C:)/....../Android Studio/bin/studio.exe.
The Android Studio window appeared in my working area Computer/OS2(J:)/Users/MyAccount/Desktop/.
I connected my mobile with my computer, Cpmputer/A0001/ appeared, from it, I can see the files in my mobile.
I clicked the run icon in the Android Studio window, a "Select Deployment Target" window apeared with message "No USB devices or running emulators detected".
(I got two USB ports and tried both but got the same result.)
Finally found the solution : )
1. Install device’s required driver. (for me it was motorola device
manager)
2. Download Google Usb Driver from SDK Manager
3. Open your phone's setting->developer options and turn on USB debugging.
4. connect your device to computer
5. Go to Device Manager from Start Menu and try to find if there is ADB Interface with an error symbol on it.
5.1. If yes, then right click on the ADB interface->Update driver
software->Browse my computer for driver software-> Let me pick from
a list of device drivers on my computer->Select Motorola ADB interface
5.2. Now one confirmation will pop up in your mobile, accept it
5.3. Now you should see no error mark beside the ADB interface in your
device manager
There are 3 steps to set up your phone for debugging:
1) Change your phone to developer's mode by going to Settings, About Phone, Software Info, Android Version - tap at least 7 times on the Build Number text. You will get a message saying you are now a Developer.
2) Enable USB Debugging in Settings - Developer Options. Make sure you are not connected to your USB port to see the USB Debugging option enabled, otherwise it will be disabled.
After you plug in your USB, swipe at the top of your screen, you will see USB Debugging on.
3) Make sure USB connection is set to Photo Transfer (or MTP - Transfer photos and videos). After you plug in your USB, swipe at the top of your screen, and you will see Tap to change USB options on the menu. Tap it, and select Photo Transfer option.
Perhaps your mobile manufacturer does not provide the proper driver.
Go to Device MAnager and look for: Android Composite ADB Interface. If it's there, the driver is properly installed. If not... You and I are on the same "wagon"...
I tell you: Acer? Never again.
USB debugging somehow got turned off under developer options on my Samsung. Turned it back on and it worked, but only by clicking on "debug app" instead of on "run app".
With me, when connecting the mobile to the pc, three options appeared on my mobile.
Charge this phone
Transfer Files
Transfer Images
I thought I should select "Transfer Files", but it dd not work
But it only when works I choose "Charge this phone"
Few ways to resolve this problem.
Case 1: Install PdaNet+ in your system. (worked for me).
Case 2: Enable the USB debugging option in your mobile. Setting > developer > Check "USB Debugging".
Case 3: Change from MTP to PTP.(sometimes vise versa works).
Question is Your development sdk no mobile version android sdk Platform.
For example, my android phone system is 6.0, i need download sdk Platform 6.0.
First, try to revoke the usb sessions in the developer options, then try downloading an oem usb driver
If then doesn’t help you can try opening the device manager on windows, right click on your phone, select uninstall. This worked for me if I had the same issue.
I couldn't find my android phone or any USB device I connect to my windows laptop on the hidden icons. Well, my mouse and phone could charge but I can't seem to see my phone in the File Explorer option.
I prefer running Apps using my phone rather than emulator in Android Studio and yet I couldn't see my phone when I connect using the USB.
This helped me solve all my problems after several hours of searching for solution.
Download Universal ADB Drivers - One size fits all Windows Drivers for Android Debug Bridge
Please use this link: https://adb.clockworkmod.com/
I hope this works for you like magic!
I can see all the devices I connect using the USB cable and my mouse receiver.
ADB is not recognizing my Redmi Note device. I am using windows 8
Also when I use below command in CMD,
adb devices
it is displaying
I followed the procedure in below link,
Using Hardware Devices
For the Redmi Note ADB drivers, you have to go through this hoop. I am certain it is the same with all MI phones or maybe for all non-Google mfg phones, I am not sure. First of all if you connect the device with USB cable and USB Debugging off, you will see that Windows 8 loads a generic driver for you to copy on/off files to the phone and SD storage. This will appear when the USB cable is first plugged in and appears as a device icon under Control Panel, Device Manager, Portable Devices, HM Note(or the device you are working with).
Go to the phone and switch on USB Debugging in the Developer section of your phone. Notice that an additional item appears as an undefined device now in the device manager list, it will have the yellow exclamation mark and it may not have the same name of the phone listed as you saw under Portable Devices. Ignore this item for the moment. Now, without doing anything to the phone (it should be already in USB debug mode) go back to the Portable Devices in Device Manager and right-click the HM Note or whatever phone you are working with that is listed there without the exclamation mark (listed under Portable Devices). Right click on the icon under Portable Devices. On that icon select Properties, Details, and under the pull down, select Hardware IDs and copy down what you see.
For Redmi Note I get:
USB\VID_2717&PID_1218&REV_0216&MI_00
USB\VID_2717&PID_1218&MI_00
(Note if you do this out of turn, the HW ID will be different with the phone USB debugging turned off. You want to copy the value that it changes to when the USB debugging is ON)
Now do as the instructions say above, of course customizing the lines you add the the INF file with those relating to your own phone, not the Nexus 10. Here is what to customize; when you downloaded the SDK you should have a file structure expanded from the ZIP such as this:
\adt-bundle-windows-x86_64-20140321\sdk\extras\google\usb_driver
Find the file named: android_winusb.inf in the usb_driver folder Make a copy of it and name it anything, such as redmi.inf.
Edit the redmi.inf and add the lines as instructed above only modified for your particular phone. For example, for the HM Note, I added the following 2 lines as instructed in the 2 locations as instructed.
;HM Note
%SingleAdbInterface% = USB_Install, USB\VID_2717&PID_1218&REV_0216&MI_0
%CompositeAdbInterface% = USB_Install, USB\VID_2717&PID_1218&MI_00
Now go back up to the unknown device that appeared in Device Manager when you switched on device USB debugging and right click on this item (has yellow exclamation mark), right click on it and then select Update Driver Software, and then Browse My Computer, Let Me Pick, click on the Have Disk button and browse to find the Redmi.inf. Continue to agree to all the prompts warning you it might not be the right driver. As the final step, Windows should have identified the device as Android ADB Interface and once that is done, you should be able to go back, open your CMD window and run the command "adb devices" as instructed in this tutorial and now you should see that the phone is now discovered and communicating.
I found this at ADB No Devices Found
Follow the below step to resolve adb shell not showing device issue.
1) Go to About Phone, and tap MIUI version for 7 to 8 times. This is to enable developer mode.
2) Got to Additional Settings -> Developer options. Enable USB debugging. And set MIDI in Select USB configuration. If you need apk installation via adb, then enable Install via USB also.
This solution worked for me :
Try Installing the PC Suite that came with Redmi Note and it will install all the necessary drivers for the mobile to work properly with PC Suite ;) . And after that check the connection with ADB it works fine.
I found a workaround without installing anything. Follow these steps:
Turn on Developer options.
Open the developer options.
Turn on the android debugging.
Scroll to bottom of the list.
There will be an option called "Turn on MIUI optimisation" which will be turned on by default, turn it off. the device will restart.
Voila! Your adb should be able to detect your mi device now.
PS: I found this solution a year back but now I don't remember where.:)
You need to enable the hidden Developer Options on your Redmi Note. To do so:
On your Redmi phone, find and launch the Settings app.
Tap General settings.
Tap About phone.
Tap "MIUI version" for 7 times.
Once you reached the 7th times, you’ll see the “You are now a developer” message appears on screen.
You are now a developer.
Once turned on, you can tap Developer options on the General Settings screen to access a list of options which deemed to be mainly useful to the developers.
Lastly, you can do a factory reset to hide the Developer options.
After the above steps, go to command prompt and run adb devices command. It should fetch the device id for connected redmi note phone.
If it doesn't work out by trying out solutions mentioned by others, then on top of that Try installing and running MI PC-SUITE from official Mi website HERE. Then try debugging again and you will see your device name in the list of available devices/options to run the app.
revoke all USB-debugging options and reenable it again in MI phones.
Setting -> Developer options -> Revoke all USB-debugging -> Then enable USB debugging
Disable MIUI optimizations
I am trying to connect my android device on mac to test application I developed.
First I installed USB driver, then I activated in my phone the developer option by tapping on Build Number and then tick USB debugging option.
Once I did all those steps when I connect my android mobile, my Mac still not recognize my device.
Any idea to solve it?
Maybe it's your USB cable, try another one.
There are two types of USB cables:
for supplying power only
for supplying power and data
I after few research and testing of existing solutions, I found mine, my issue was released while I have installed Android file Transfer for Mac
I experienced the same problem with a Moto X and my Macbook Pro. I tried many of the suggestions (installed Android File Transfer, tried different usb ports on my computer, Settings => Storage => USB computer connection => toggled between MTP and PTP, etc.). None of these other recommendations helped.
It finally worked when I tried a different micro-usb cable.
Bizarre. You definitely want to first enable Developer Options first by going to Settings => About Phone => tapping Build number 7 times to display Developer Options. From there, you want to enable USB debugging.
I found this solution to be helpful to resolve this problem
Connect your Android to your Mac via USB.
Unlock your Android's screen. ...
Swipe down to open the Android Notification Panel.
Tap the USB option in the Notification Panel.
Tap "File transfer" or "MTP."
Click the Go menu and select "Applications."
Double-click "Android File Transfer."
https://discussions.apple.com/thread/250023078
I had this problem. The only solution was to reboot my computer. Then it started working again.
Just to add my experience here. I had a similar problem with my mac book pro and my Google Pixel 1 device. For me when running adb devices locally, I was no longer showing my device on the list. I would see any emulators I had running, but not my physical device.
My solution and steps:
Go to the "Settings App"
Go to "Developer Options"
Revoke USB debugging Authorizations
Toggle Developer Options off / on
My device then prompted me to allow debugging from my computer and everything continued to work as expected. adb devices resulted in showing my connected device.
Hopefully, this will help someone else if the above does not.
Make sure to have debugging by usb enable on your device.
It is an option inside "Developer options"
I've recently (2018) started to have this issue, and have found the only way to get my device connected is to use a USB hub. I have not been able to track down a root cause but will edit this answer if I can find a solution rather than a workaround.
I connected my Android deceive with my mac:
1) If you use Android studio, you may update to latest version of 1.0.2 or 1.1 preview, because lower version have some problem with ADB connection.
2) You may restart your IDE once again.
3) You may go to settings -- storage -- three docs on the right up corner -- USB computer connection -- enable MTP
I have an HTC U11 and a MacBook Pro (2017). It used to work most of the time, but I experienced issues with it once or twice. Then a restart of the Mac solved the problem.
Recently I was not able to USB debug. adb devices gave nothing, even though my phone said I'm USB debugging (even asked if I wanted to).
After trying many things the solution was to connect my phone and run HTC Sync Manager (I also had to update it). Then it magically started to woek.
I hope it helps somebody.
check your android sdk tools, install your sdk-plateform-tools package.then it is ok
For me what fixed the problem is
i clicked on the notification "USB for file transfer" in the
notification panel on the phone
Clicked on "Transferring images"
Than I clicked on "Transferring files / Android Auto" and it was fixed.
I have Sony Xperia L (C2104) and I want to connect it to Eclipse (Juno) for testing and debugging Android Apps. I have installed the Sony's PC companion software. I have turned on the USB Debugging via 'Developer Options' and the USB Connection Mode is MTP.
When I plug my device to Laptop, running Windows 8, the notification bar shows 'USB Debugging Connected' and 'Internal Storage & SD Card Connected'. However, when I start Eclipse, It does not show my device in 'Android Device Chooser' window..
I think the device drivers should have got installed along with the PC Companion Software but When I right click on My Computer -> Manage -> Devices, It shows a device 'Android' in Other Devices category along with a '!' with it. So maybe the drivers are absent.
Please help, need to test app on it urgently. I Searched drivers for Xperia L on Sony's website http://developer.sonymobile.com/downloads/ but couldn't find the driver.
This works for me . I changed the following setting in the phone.
Settings > Xperia > USB Connectivity > USB connection mode
and select Mass storage mode (MSC).
By default Media transfer mode (MTP) is selected and USB cable must be unplugged to change this option.
I know this is an old thread still I am adding few details from Sony official website there is a read me provided. It says If you can’t find the driver you are looking for, drivers for all Sony smartphones and tablets are available in our PC Companion software.
So for making this work you need to download PC companion software form this link. After installing the software you will be able to download the driver for your phone.
You need an adb driver, not just their standard driver (sometimes they are the same, but often they are not).
For a list of adb drivers, follow this link ADB driver listing
Here's a Sony specific list
At times for sony experia the developer options are hidden. To unlock it do the following.
You have to go to settings-> About Phone -> build version.
Click on build version 7 times to unlock the developer options. I tried this and it worked perfectly.
Hope it helps.
It's late to answer this question, but I had the same problem just now and solved it
Install the universal ADB driver from http://adbdriver.com/upload/AdbDriverInstaller.exe
(you might have to change between Media Transfer mode and Mass storage mode on your phone, they use different driver)
On eclipse, Open Perspective > ddms
There's a devices panel that opens up. There's a small white triangle on the right, click on it and click reset adb
I had the same problem. Worked for me installing PdaNet driver downloaded from http://www.junefabrics.com/android/download.php
I downloaded Sony PC Companion from Sony's website and installed it. That came with appropriate drivers..
I did the same trick that Akash has posted
"At times for sony experia the developer options are hidden. To unlock it do the following.
You have to go to settings-> About Phone -> build version.
Click on build version 7 times to unlock the developer options. I tried this and it worked perfectly.
Hope it helps."
It also worked for my sony Xperia L C2104