I tried to play Android Studio 2.0 with my mobile without success, what I did are:
In my mobile, Apps/gear icon/Settings/SYSTEM/{} Developer options/ Android debugging/, enable the Android Debug Bridge(adb) interface (set tick).
After plug in my mobile to my PC with a USB cable, I found A0001 in my Computer folder. Within A0001, I can see the files in my mobile.
In my PC, run Android Studio/bin/studio.exe, "Select Deployment Target" window shows with message "No USB devices or running emulators detected"
I have tried two different USB drivers but got no lucky.
Perhaps I should tell Android Studio where is my USB driver? But, how?
Can you help?
I had the same problem too and I managed to resolve it this way.
First, enable debugger mode in your android device.
Go to Device Manager from Start Menu and try to find ADB Interface with an error symbol on it. This generally happens because windows sometimes fail to load all the mobile device drives.
Next, Go to http://adbdriver.com/downloads/ and download the driver installer, unzip and run it.
Now go to Android Studio and you should find that everything is working fine.
Chill....
same here... but I hope you can avoid this problem the same way I Did.
There is an "universal ADB Driver for all Android Devices".
Yep... sounds like magic.
Just follow this link.
https://devs-lab.com/usb-adb-drivers-for-all-android-devices.html
Fun fact there is no "Step 5" in that article so I'll give you.
you have to enable "USB Depuration" from "Developer Options" connect your cellphone to computer as a "MTP storage" , after windows detected your cellphone as a "Portable Device" Execute ADBDriverInstaller.exe (that downloaded from devs-lab)
check the device list and your cellphone will say "Driver incorrectly", select your cellphone and press install.
Step 6: Once the process is completed, you’ll see something like the image that appears there (in the link).
I hope that somebody else work this
Go to Run > Edit Configurations...
Under Deployment Target Options select Show Device Chooser
Dialog from the drop-down-list
See picture for reference
After struggling with this problem for a while, I found that there are certain cables that can only charge your phone, and even though they seem to be working, they do not allow your phone to be used as a "Media Device" and therefore Android Studio does not detect it.
Go to
Tools | Android | Enable ADB Integration
Make sure it's enabled. When I upgraded to 2.X it was for some reason disabled for me and it took me hours to find it.
I just cannot beleive why it is so difficult! let me try again and please check my steps again:
I installed Android Studio 2.0, then run Computer/OS(C:)/....../Android Studio/bin/studio.exe.
The Android Studio window appeared in my working area Computer/OS2(J:)/Users/MyAccount/Desktop/.
I connected my mobile with my computer, Cpmputer/A0001/ appeared, from it, I can see the files in my mobile.
I clicked the run icon in the Android Studio window, a "Select Deployment Target" window apeared with message "No USB devices or running emulators detected".
(I got two USB ports and tried both but got the same result.)
Finally found the solution : )
1. Install device’s required driver. (for me it was motorola device
manager)
2. Download Google Usb Driver from SDK Manager
3. Open your phone's setting->developer options and turn on USB debugging.
4. connect your device to computer
5. Go to Device Manager from Start Menu and try to find if there is ADB Interface with an error symbol on it.
5.1. If yes, then right click on the ADB interface->Update driver
software->Browse my computer for driver software-> Let me pick from
a list of device drivers on my computer->Select Motorola ADB interface
5.2. Now one confirmation will pop up in your mobile, accept it
5.3. Now you should see no error mark beside the ADB interface in your
device manager
There are 3 steps to set up your phone for debugging:
1) Change your phone to developer's mode by going to Settings, About Phone, Software Info, Android Version - tap at least 7 times on the Build Number text. You will get a message saying you are now a Developer.
2) Enable USB Debugging in Settings - Developer Options. Make sure you are not connected to your USB port to see the USB Debugging option enabled, otherwise it will be disabled.
After you plug in your USB, swipe at the top of your screen, you will see USB Debugging on.
3) Make sure USB connection is set to Photo Transfer (or MTP - Transfer photos and videos). After you plug in your USB, swipe at the top of your screen, and you will see Tap to change USB options on the menu. Tap it, and select Photo Transfer option.
Perhaps your mobile manufacturer does not provide the proper driver.
Go to Device MAnager and look for: Android Composite ADB Interface. If it's there, the driver is properly installed. If not... You and I are on the same "wagon"...
I tell you: Acer? Never again.
USB debugging somehow got turned off under developer options on my Samsung. Turned it back on and it worked, but only by clicking on "debug app" instead of on "run app".
With me, when connecting the mobile to the pc, three options appeared on my mobile.
Charge this phone
Transfer Files
Transfer Images
I thought I should select "Transfer Files", but it dd not work
But it only when works I choose "Charge this phone"
Few ways to resolve this problem.
Case 1: Install PdaNet+ in your system. (worked for me).
Case 2: Enable the USB debugging option in your mobile. Setting > developer > Check "USB Debugging".
Case 3: Change from MTP to PTP.(sometimes vise versa works).
Question is Your development sdk no mobile version android sdk Platform.
For example, my android phone system is 6.0, i need download sdk Platform 6.0.
First, try to revoke the usb sessions in the developer options, then try downloading an oem usb driver
If then doesn’t help you can try opening the device manager on windows, right click on your phone, select uninstall. This worked for me if I had the same issue.
I couldn't find my android phone or any USB device I connect to my windows laptop on the hidden icons. Well, my mouse and phone could charge but I can't seem to see my phone in the File Explorer option.
I prefer running Apps using my phone rather than emulator in Android Studio and yet I couldn't see my phone when I connect using the USB.
This helped me solve all my problems after several hours of searching for solution.
Download Universal ADB Drivers - One size fits all Windows Drivers for Android Debug Bridge
Please use this link: https://adb.clockworkmod.com/
I hope this works for you like magic!
I can see all the devices I connect using the USB cable and my mouse receiver.
Related
Suddenly my Android Studio stopped detecting all my devices, none of them is working. It happen from one execution to another. I've changed a few lines of code (1 min maybe?), hit run (instant run) and then I missed all my devices.
I'm using a Mac and as devices: Nexus 5x, Galaxy s6 and Oneplus One. What can be happening? I've checked previous questions here and tried all this:
Run configurations: no matter if I chose usb device or show the window, it does not work.
Tools > Android > Enable ADB integration: didn't help
Command line adb devices does not detect any either.
I've revoked and granted again USB authorizations. Still not working.
I've tried other apps I have, none work.
Restarted phones
Restarted android studio
Restarted computer
(Note: if I start an emulator it works, but I'd prefer to use physical device since I have to scan real barcodes)
Thanks a lot in advance.
On Lollipop 5.1
Go to About Phone
Click 7 times on Build Number. Now Developer options are enabled
Go back and Click Developer options
Enable USB debugging under Debugging.
Well, I've fixed. The problem in case any faces the same was a Stetho (http://facebook.github.io/stetho/) tab in chrome, the one you open by typing: chrome://inspect/#devices not sure about the reason because it's been open for 2 days now, but it was the cause, once I closed it, it worked.
Found this unaccepted answer here: macbook adb cannot open interface That for sure should be accepted.
EDIT: I've been able to replicate the problem. It happens when you have the devices tab open and try to run a second app that has stetho configured.
It happens if your device drivers not installed Please do this.
In Case of PC
Right click my computer select manage select device manager from left panel if your phone drivers not installed there will be yellow alert on driver right click on it select update driver software then select search automatically for update driver software.
Other
Please install the missing drivers of your phone.
I had the same problem . What I've done to solve it going to Setting >> Additional Setting >> Developer Option
Now select:
Developer option on
USB debugging on
Install via USB on
USB setting security on
Verify apps over USB
OK, what finally worked for me was to go into Settings\Developer options\Select USB Configuration and change it to PTP or MIDI....either one of those worked for me and all of the sudden my phone showed up and I was able to see and run my test app on my android phone.
This woorked for me
Go To Settings
Developer Options
Enable USB Debugging
Enable Verify Apps over USB
Select USB Configuration: Choose MIDI
I hope it also works for you
I am trying to connect my android device on mac to test application I developed.
First I installed USB driver, then I activated in my phone the developer option by tapping on Build Number and then tick USB debugging option.
Once I did all those steps when I connect my android mobile, my Mac still not recognize my device.
Any idea to solve it?
Maybe it's your USB cable, try another one.
There are two types of USB cables:
for supplying power only
for supplying power and data
I after few research and testing of existing solutions, I found mine, my issue was released while I have installed Android file Transfer for Mac
I experienced the same problem with a Moto X and my Macbook Pro. I tried many of the suggestions (installed Android File Transfer, tried different usb ports on my computer, Settings => Storage => USB computer connection => toggled between MTP and PTP, etc.). None of these other recommendations helped.
It finally worked when I tried a different micro-usb cable.
Bizarre. You definitely want to first enable Developer Options first by going to Settings => About Phone => tapping Build number 7 times to display Developer Options. From there, you want to enable USB debugging.
I found this solution to be helpful to resolve this problem
Connect your Android to your Mac via USB.
Unlock your Android's screen. ...
Swipe down to open the Android Notification Panel.
Tap the USB option in the Notification Panel.
Tap "File transfer" or "MTP."
Click the Go menu and select "Applications."
Double-click "Android File Transfer."
https://discussions.apple.com/thread/250023078
I had this problem. The only solution was to reboot my computer. Then it started working again.
Just to add my experience here. I had a similar problem with my mac book pro and my Google Pixel 1 device. For me when running adb devices locally, I was no longer showing my device on the list. I would see any emulators I had running, but not my physical device.
My solution and steps:
Go to the "Settings App"
Go to "Developer Options"
Revoke USB debugging Authorizations
Toggle Developer Options off / on
My device then prompted me to allow debugging from my computer and everything continued to work as expected. adb devices resulted in showing my connected device.
Hopefully, this will help someone else if the above does not.
Make sure to have debugging by usb enable on your device.
It is an option inside "Developer options"
I've recently (2018) started to have this issue, and have found the only way to get my device connected is to use a USB hub. I have not been able to track down a root cause but will edit this answer if I can find a solution rather than a workaround.
I connected my Android deceive with my mac:
1) If you use Android studio, you may update to latest version of 1.0.2 or 1.1 preview, because lower version have some problem with ADB connection.
2) You may restart your IDE once again.
3) You may go to settings -- storage -- three docs on the right up corner -- USB computer connection -- enable MTP
I have an HTC U11 and a MacBook Pro (2017). It used to work most of the time, but I experienced issues with it once or twice. Then a restart of the Mac solved the problem.
Recently I was not able to USB debug. adb devices gave nothing, even though my phone said I'm USB debugging (even asked if I wanted to).
After trying many things the solution was to connect my phone and run HTC Sync Manager (I also had to update it). Then it magically started to woek.
I hope it helps somebody.
check your android sdk tools, install your sdk-plateform-tools package.then it is ok
For me what fixed the problem is
i clicked on the notification "USB for file transfer" in the
notification panel on the phone
Clicked on "Transferring images"
Than I clicked on "Transferring files / Android Auto" and it was fixed.
I recently bought LG G3 and I have enabled debugging mode but Eclipse is still not recognizing it, back when I used the Galaxy S3 for development I had to install Samsung Kies. The G3 drivers are installed and I can see it in My Computer, do I need something like the Kies but for the LG? If so can someone please post a link for that?
See update below
I found the answer that worked for me.
When you plug in the phone, bring down the status shade, pick the USB item ("USB connected") then, from there, pick "Internet connection" -- I chose Ethernet, but I'm not sure the choice matters on the dialog that pops up..
This enables USB debugging to become active; leaving it on Charging, MTP, or PTP does not work.
Once you do this, you can follow #Siddharth's steps to setting the ADB drivers, if needed. (You may need to use the actual LG drivers and not the Google drivers, but once I got this far, it was just like any other phone.)
Caveat
For me, even after going through this once, I still get the "installer" first and then have got go in and choose the "Internet connection" again. But, at least it works.
Update 10 Dec 2014
A recent firmware update has, indeed, removed the "Internet connection" as an option. Instead, PTP now works. I still get the "Connected as an installer" notification every time I plug in the phone and have to click on the notification then click on "Camera (PTP)" -- or wait about a minute. It's slightly better than what It was.
Also note: When this change occurred I had to install the drivers again for the phone, since it comes up as a different type of device when "Camera (PTP)" is chosen than when I used the "Internet connection" option.
For me, this has solved the problem: simply go to LG's website, http://www.lg.com/us/support/software-manuals, select the model (I have selected 'D850') and go to Software Updates tab where you can download the driver. I have installed it and then Eclipse recognized my device. I'm working on Windows 8.1, by the way.
yakobom
After a lot of searching and trying all solutions still I couldn't connect my LG G3 to eclipse on mac. Finally I find this solution, it works for me hope for you works too:
Install LG USB driver for mac
Go and enable developer mode in your G3 (Setting->About phone (in General Tab)--> Software information --> Tap 8 times on Build Number) then you will see the message which says the Developer option is enabled
In this step you expect that after connecting your mobile via USB cable, the Eclipse detect it
But for me it didn't happen
in this step you need to go (Setting--> Developer Options--> and turn off this option from above green (on/off) switch then again switch on this option from same place (If you don't do this step the "USB Debugging" mode will stay fray and you can not enable it)
In Developer Options menu scroll down until find the "USB Debugging" then tic it and enable it.
almost finished , you should back and configure running mode for your application and see the G3 in your connected usb devices
Try this solution :
Right click on My Computer --> Properties --> Device Manager
Right Click on your device --> Update driver software
Click on "Browse my computer for driver software"
Give path of your android sdk like "D:\Android_Sdk\sdk\extras\google\usb_driver" and tick "Include subfolders"
Click
Now repeat the steps till "Browse my computer for driver software".
Then click on "Let me pick form list of device drivers on my computer". Click on the first option and click next and then click yes. Drivers will be installed for your device.
Hope this helps.
Change the USB mode to PTP and you will get the RSA prompt.
Within the prompt, select allow it > ok and you are done.
This worked for me when I had the same problem on a Mac computer.
To contribute to possible solutions for this fix: I am using an LG G3 on a Mac.
In my case, ADB saw it as a device when I checked, and the Mac showed the device information in the System Information window, yet Eclipse did not see it. I also did not get the RSA confirmation pop-up when I connected the device through USB.
To fix, with my G3 connected, I selected the USB PC Connection (either from the navigation bar or through the settings) and changed it to be Send Images (PTP). Once this was on, I was given the RSA pop up and Eclipse recognized the phone in the Run Configurations window.
If you have this problem on Ubuntu; here is what I did to get it working:
Switch to PTP from MTP on the phone (this assumes you're connected via USB)
Disconnect the USB cable
Go to settings -> developer options and select revoke usb authorizations then ok
Make sure USB Debugging is checked
Reconnect the USB cable and your phone will say its connected as an installer; wait a minute or three and debugging mode should appear on the status bar (on the phone)
Open Eclipse and go to DDMS
Select "reset adb" in the dropdown if your phone isn't appearing yet
Working on Windows 7. All of the solutions from other sites didn't help (i.e. restarting adb and switching between MTP, PTP, Charing). In the end, I found this article (http://www.technobuzz.net/install-lg-g3-lg-drivers-windows-mac-usb-adb/), which contains links for the necessary drivers for the lg g3 (and some others I think). This did the trick and made the RSA key fingerprint dialog appear finally. After confirming, adb and eclipse recognize my device perfectly!
I had this buggy error with my LG Optimus L3 phone connecting to Win7/8 machines!
Cause: Device Driver was missing as it seemed at the end when I fixed it!
How to Fix:
Search through web (using Google) "LG < Your_Phone_Model Number > Drivers Download".(Ex.:- Go to About phone in your settings list > Model Number, for me it's LG-E400f)
Mostly the first few links are related to the required Device Driver download page.(Ex.:- for me I got the following link and for each device driver LG or most of the other vendors/manufactures have that kind of a Manuals and Drivers Page) Visit that page mentiioning about software update and drivers downloads.
Scroll down to the section of "Manuals and Software Update" and doing just the Step 1 was enough for me, which is "Install the USB DRIVERS "
Download it(for Mac or Windows) > Install It > Check Your Eclipse ADT > and it should be visible under Devices tab by now
Cheers!!!
Hope this helps to someone else to clearly get to the solution!
it seems that Eclipse shows the offline mode for lg G3 and some newer devices
and there is no way no use these devices for ADB debugging
there is a way
I am using windows 10
1- download this 11 MB file < http://dl2.uncox.com/android/upload/platform-tools-v22.zip>
2- then go to the directory that you installed the SDK
3- extract the zip file in to the platform-tools folder , override all files(click yes to all) be sure that Eclipse doesn't running
4- open Eclipse and select your android device that stands in devices tab at the right-top corner of your screen and then you can see the arrow near the screen- capture icon and you will find the reset-ADB. click on it ,after that your phone will ask you to allow android debugging for your device click on it
5- congratulations .now you can see that your device shown online
i hope this will help .sorry for my english
I also had a great deal of trouble when attempting to debug android applications on my shiny new LG G3. What ended up working for me was first installing the default google drivers onto the G3 and then following the process detailed by #lilbyrdie.
The process of installing the google usb drivers is very nicely gone through here.
However, with the most recently pushed android update to the G3 there are no longer the options for internet connection or charge only; but they seem to have fixed this defect forcing you to make this odd choice to enable debugging. The only options remaining are MTP and PTP, but if you pull down the notification drawer, choose the 'USB connected' notification (assuming the device is connected to your computer via USB of course) and from there click on 'Media sync (MTP)' even if it is already selected then debugging should be enabled.
Android can't update on the fly the developer mode. So, after turning on developer mode (and given you have the latest driver) switch the green button(under settings->general->developer options) to off and then back on. Then turn debug mode on (after that windows recognizes a new device) and you should be good to go.
In my solution for Windows 7 was helpful to update Android SDK Tools to latest version.
ADB Single/Composite values for LG G3 phones -
I found it was necessary to update (~userName/.android/)adb_usb.ini file with the line 0x1004:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x2207
0x1004
In addition, I needed to add the following entry in (.../sdk/extras/google/usb_driver/)android_winusb.inf:
;
; Android WinUsb driver installation.
;
...
[Google.NTx86]
...
;LGE Android Phone
%SingleAdbInterface% = USB_Install, USB\VID_1004&PID_633E
%CompositeAdbInterface% = USB_Install, USB\VID_1004&PID_631D&MI_00
%CompositeAdbInterface% = USB_Install, USB\VID_1004&PID_631D&MI_01
[Google.NTamd64]
...
Oh, and set USB to PTP as well as turn-on USB debugging.
When you're all done with the file modifications and several passes at installing the drivers (ref. earlier posts), you can verify your phone is ready via the Device Manager. It will list your phone as "Android Device"->"Android Composite ADB Interface". I believe an earlier post explains setting up the drivers
I know this question has been asked numerous times, but none of the threads have had an answer to solve my problem. It seems no matter what i try Eclipse just wont detect my phone, I have set it to debug mode in the settings, i've installed "Kies 3" on my laptop and it says i have the latest drivers already installed on my phone when i try to update it.
I've installed the google USB driver package from the sdk manager and have downloaded and installed the samsung driver from the samsung website. Windows recognizes the device and in the device manager under android phone it appears as "SAMSUNG android ADB Inerface".
Im running windows 7 and have even tried deleting all the mounted dive drivers from regedit as i seen suggested in another thread but still no joy! Really starting to get frustrated with this at this stage i've been trying for two days now to figure this out!
This is such a pain! I need to be able to debug on my phone too as i'm using features that the emulator can't handle (i.e. audio recording). I'm all out of ideas here so any help would really be appreciated!
Thanks
The method I followed to install my GT-I9300 drivers was this:
Download samsung drivers from this link:
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
Then just connect your phone and make sure you have a stable Internet connection: It will download required drivers automatically.
Also, make sure you have enabled Android developer options in your phone settings. Enable USB debugging in developer options.
I usually get it to work, when I switch the USB mode in my smartphone (e.g. MTP to PTP). This way, windows starts downloading more drivers.
1) Try disconnecting device from PC, revoke USB Debug authorization from settings menu, and then re-authorize the computer you are working on once you connect it again.
2) Check to see if you see the phone in DDMS perspective (left hand side) - if so, try clicking on it and it should work.
3) try removing all drivers (Google, Samsung etc.) + scan "leftover" registery entries using a reg cleaning program. Then install ONLY Kies Light version and try again.
4) It once worked for me - try changing the USB cable (preferably, to an original one)
Let us know if something worked!
1) enable USB debugging in your phone's settings.
2) ensure that you have the proper drivers installed.
3) open adb in command prompt and run "adb connect"
I am trying to enable USB Debugging on Android so that I don't need to use the emulator.
I did what all the posts all around the web say to do: I went to settings -> applications -> Developer -> USB debugging
It still does not turn on the notification sign that USB Debugging is enabled, and Eclipse does not recognize it, and uses the regular emulator.
Does anyone have any idea what is wrong?
You haven't specified what device you are using or what operating system you are using, so that could be helpful.
A few things to keep in mind:
1 Don't mount as USB storage.
2 You also need to make sure to install the drivers for your phone so that the Android Debug Bridge (ADB) can properly communicate. After these are installed, try the command "adb devices" and you should see an item in your list of devices.
Update based on your comment: You can download Kies from Samsung, which include the drivers (as well as other things): http://www.samsung.com/us/kies/
Or you can find unofficial driver-only packages, such as: http://forum.xda-developers.com/showthread.php?t=961956
I think you'll need the OEM USB dirvers.
Read this:
OEM USB Drivers
My experience with windows has been that you might need to un-install the USB drivers under device manager. Then disconnect the device (restart might be required). After plugging the device back in make sure you use the manufactures drivers if available
you have installed your device driver rite?then right click on your app name->run as->run configurations->target->select manual->apply.after that click on debug button then it will ask you to select the device.
If everything else is tested, try with another USB cable.
On Android 4.2 and higher, the Developer options screen is hidden by default. To make it visible, go to Settings > About phone and tap Build number seven times. Return to the previous screen to find Developer options at the bottom.
Fruthermore on some devices you will be asked to accept an RSA key, which allows debugging through your computer. This ensures that other adb commands cannot be executed unless you're able to unlock your device.
Detailed information can be found here:
http://developer.android.com/tools/help/adb.html It is the overview about adb commands (which is used to send data to your device) and it starts with the steps how to bring your phone to debug-mode.
I wish to add to Danation's answer with the following.
If you have installed KIES, and you've tried following instructions a couple of times (for the android SDK package) without success, here's what worked for me:
As a precaution, disconnect the device, and press 'Revoke USB Debugging authorizations'.
Now, go to kies, and reinstall the device driver as seen on the image below.
Connect the device.
For me, it was a routine, it usually works when installing kies, but I was stuck on this today for a little while, and I hope i can help others with my solution as well..