I have samsung galaxy note 10.1 and model GT-N8000, I want to connect it to android studio and want to run my own made app. But my android studio not showing anything and even pc do not detect it , not even popping up notification to show me that some thing is connected. I check this device to other computers but got same thing.
So what could be a problem. I have done resetting , but nothing is helpful, Updated driver, installed the google driver for usb, installed the universal driver. But nothing is really helping. So at least pc should detect it but its not.
Any solution. ? Please help
Make sure, that you chose Connect as Camera or PTP on your phone.
Go to developer settings and activate Adb-debugging or USB-debugging.
Also check, whether you have installed the correct drivers. Try to reinstall the correct drivers.
And make sure that neither your USB cable nor your USB-drive is faulty. If so try to use another cable and different usb-drive.
You could also try to connect your phone wirelessly to Android Studio
Couple of things you can try -
Go to settings, developer options and turn USB Debugging on. If it's off, Android Studio will not detect your phone.
If you PC is not detecting your device, either your USB cable is faulty or your USB drive. Only way to know is connect your phone to another USB-Drive or connect it using another cable.
Related
I am having a small issue with Android Studio. Whenever I put my phone into either of the front two USB ports, it shows my device as "Offline". If I use any of the back USB ports, it recognises the device perfectly fine.
I can charge and browse my phone fine from the front two USB ports. I have tried resetting ADB, and installing/updating Samsung USB drivers. I have tried enabling and disabling USB debugging - but no luck.
It really can't be an issue with the phone or with Android Studio, as in the back USB ports it works fine - surely it has to be an issue with the front USB port?
Anybody have any ideas on how I could solve this? (Other than just using the back ones!)
I have the same problem. I have 4 USB 3.0 ports on the computer and 2 USB 2.0 on the keyboard. Nexus 5 can be plugged and recognized on all of them while Samsung Galaxy S4 is not recognized on one of the keyboard ports and one of the PC ports. In my case it is the device I guess. You can try with another device to see.
You can try this:
Go to tools/enable adb integration and uncheck it.
now check it and run again. Next time, android studio will restart adb and it may find your device.
I know this question has been asked numerous times, but none of the threads have had an answer to solve my problem. It seems no matter what i try Eclipse just wont detect my phone, I have set it to debug mode in the settings, i've installed "Kies 3" on my laptop and it says i have the latest drivers already installed on my phone when i try to update it.
I've installed the google USB driver package from the sdk manager and have downloaded and installed the samsung driver from the samsung website. Windows recognizes the device and in the device manager under android phone it appears as "SAMSUNG android ADB Inerface".
Im running windows 7 and have even tried deleting all the mounted dive drivers from regedit as i seen suggested in another thread but still no joy! Really starting to get frustrated with this at this stage i've been trying for two days now to figure this out!
This is such a pain! I need to be able to debug on my phone too as i'm using features that the emulator can't handle (i.e. audio recording). I'm all out of ideas here so any help would really be appreciated!
Thanks
The method I followed to install my GT-I9300 drivers was this:
Download samsung drivers from this link:
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
Then just connect your phone and make sure you have a stable Internet connection: It will download required drivers automatically.
Also, make sure you have enabled Android developer options in your phone settings. Enable USB debugging in developer options.
I usually get it to work, when I switch the USB mode in my smartphone (e.g. MTP to PTP). This way, windows starts downloading more drivers.
1) Try disconnecting device from PC, revoke USB Debug authorization from settings menu, and then re-authorize the computer you are working on once you connect it again.
2) Check to see if you see the phone in DDMS perspective (left hand side) - if so, try clicking on it and it should work.
3) try removing all drivers (Google, Samsung etc.) + scan "leftover" registery entries using a reg cleaning program. Then install ONLY Kies Light version and try again.
4) It once worked for me - try changing the USB cable (preferably, to an original one)
Let us know if something worked!
1) enable USB debugging in your phone's settings.
2) ensure that you have the proper drivers installed.
3) open adb in command prompt and run "adb connect"
I'm about to start writing some Android applications, I have downloaded Jave/Android and Eclipse.
I have a test Android tablet (Viewsonic Viewpad 10s) which I will be running the software on.
I was hoping to be able to just plug the Android device straight into my PC to allow me to debug/run applications on the tablet.
I have purchased a male->male USB cable and plugged it into both devices, but nothing happens, it doesn't even come up with an 'unknown device' in the 'devices' window. Is there something else I need to be doing to get Windows to recognise this device? (I'm running Windows 7 (64bit)).
Alternatively, is this the best way to be running/debugging on the tablet? I was thinking that there might be a network debugging application, as both devices are on the network?
I'm totally new to Android, so might be missing something obvious. Although I have set the 'USB Debugging' within the 'Development' menu.
Thanks in advance.
Rich.
It's a Windows problem, Windows isn't capable of recognize your tablet on its own, you need to install the appropriate USB drivers for your device in order to use your tablet when it is connected to your PC.
Under a GNU/linux distribution like Ubuntu everything is much more easier and you can just plug in your device without installing anything, you just have to set the right permissions for the device once.
Unplug the device from your machine
Install the driver for your device : http://www.viewsonic.com/support/downloads/drivers/_download/tablet/viewpad10s/ViewPad_10s_USB_driver.zip
Plug your device in
look at the device for a notificaiton saying debugging enabled.
If you dont, you will need to open Device Manager, find the listing that your computer thinks the device is and right click and uninstall it. Then unplug and replug.
I'm having an issue with my Galaxy S2. I typically leave it in Debug mode, up until a few days ago it has worked great. I've successfully loaded APK's for testing through eclipse previously.
I tried to load a prototype of a new app im working on and when I plugged in the S2 nothing happened, Windows didn't beep like usual and when I tried to view running devices it did not show up.
When I look at the device manager under universal serial bus controllers, it doesn't show any 'unknown devices'
I've tried reinstalling drivers through kies, and third party sources (as well as removing all drivers and letting windows install them again for me.
I've tried connecting as Mass Storage Device, with debug mode on and off.
I've restarted both my computer and phone many times.
When my phone is off and plugged in Windows will beep and say that a device was connected but not recognized (which is more then what I get when the phone is on)
And sometimes when I "troubleshoot connection issues" in Kies it will reinstall the drivers and after the process is complete windows will report "Drivers were not successfully installed"
I've tried plugging it into my Windows XP laptop and it will show up as "Unrecognized device" even after I installed Kies on the laptop, and tried the driver installation it with the same results.
Posting here is my last resort as I've spent close to 5 hours troubleshooting this issue, and searching for answers. My biggest concern is that when I do plug my phone in it will beep to say that it is charging, but windows 7 doesnt even see it!
I appreciate all suggestions & help!
EDIT: Also I installed the Samsung Android USB Driver for Windows and windows reports that the drivers were not successfully installed
Thanks
Jon
Try to key in dialer:
*#7284#
It has 4 options:
UART
MODEM
PDA
USB
MODEM
PDA
In USB section, select the PDA. If it already selected to PDA then reselect it by selecting MODEM and then PDA again.
Only change the USB setting and then press back and try reconnect to kies again.
Hope it helps..
I had the same problem and JUST as i was about to give up, i realized that I had replaced my usb cord with a generic one from the store. I happened to still have the old one around still and that ended up being my issue -.-; Hope this helps someone else!
This really sucks, I know I've had this happen a few times and it's really annoying to have to deal with. I had luck with this post where they suggest:
... they suggested removing battery from hero with usb pluged in and
then putting battery back in, so i did this thinking it wouldn't work
and hey presto, mounting option became available. I was then able to
follow your first set of intructions to install the drivers through
devices and sync is now working!
If that doesn't work there are a few suggestions and helpful driver websites on there for you to follow :-D
I know I would:
Uninstall all drivers related to your device
Restart Computer without connected
Pull battery on device, plug it in, and once detected put battery back in.
If driver doesn't install correctly, or "unknown device", go to the website on that forum to get the CORRECT driver for your device and Windows OS
Go to Control Panel->Device Manager->(unknown device)->Update Driver
Locate downloaded driver, install
Make sure that when connected, the device says "USB Connected" in it's notification area
Click "Turn on USB storage", or "USB Debugging -> USB debugging"
.. this will at least show you that you have the right drivers.
IF you did all of this and you still can't get it to debug through eclipse, you either have conflicting drivers somehow, or your eclipse IDE isn't setup properly. Maybe update Eclipse, and Android SDK and try again?
Sorry can't give you exact details but this problem could be ANYTHING lol
I had the same problem while using a generic cord.
Don't use for usb transfert
I think they are made only for charging.
Solve by using a stock cord not a generic one.
Okay, so after talking to Samsung they informed me that there is a small defect with the female usb connection, and that it can sometimes be loose.
Only solution, mail it to them...
This fix works on all my computers that "don't recognize" my rooted Samsung Android. Plug the phone into the computer and restart phone. When it comes up again, the computer recognizes it.
My method is KIES AIR.
Open Kies Air
Go to settings > Bluetooth off set.
More settings > Tethering and portable hot spot > Bluetooth tethering check true and portable Wi-Fi hotspot check true.
Now KIES air open on your device and start button click. copy IP address to browser
Your s2 is connected your computer.
Open browser, and copied ip then click paste.
I have two Win XP SP3 workstations that would not connect to my Galaxy. Finally fixed it by installing this particular Intel driver and installing Windows Media Player 11.
if you are running a custom kernel on your phone, you may want to check too if you have "force fast charge" turned on or not. I thought my phone and computer would never talk to each other again but it turned out I had fast charge enabled. Turning that off solved the problem for me.
It might be an issue with USB 3.0 ports. I was tormented by this issue too and I was at the point where I was so ready to burn this device to kingdom come. Before I did that, I decided to use my never-used 2.0 port and guess what, IT WORKED! If your PC doesn't have a 2.0, good luck with that.
punch in code *#7284#, (UART set to PDA) and (USB set to PDA)
solved my problem
I've followed this post trying to run my application on my galaxy. My app is debuggable, USB debugging is checked on phone and I've manually installed USB drivers - my device manager shows me that I have Android ADB Interface installed.
Despite it all - when I am running adb devices it would only list the emulator.
Any ideas? thanks!
P.s. I am running windows 7 and the mobile is Samsung Galaxi 1900I
I use Droid X, in Win 7.
sometimes it is not work too (adb can't detect my device)
but the solutions is simple, just switch usb connection into Windows Media Sync (ie. from PC Mode) , it is work for me.
also make sure to set your device in Debug mode (USB Debugging)
Yotamoo, When you first plug in, Windows offers you some choices on how to deal with the new device; Open in File Explorer, etc...one of them is Windows Media Player. Choose that. I had similar problems and this solution worked for me and my galaxy S3...
hakim, why does this work?
Make sure you installed the USB Drivers.
Locate your phone in Device Manager and see if it working correctly.
These are the correct drivers.
Turn Debugging mode on on your phone.
You will be prompted to accept USB debugging on your device if it detects some application would like to use it.
After you agree it will pop up as a debug-able device.
I had the same problems.
Try to update your smartphone in the device manager (computer->properties).
http://developer.android.com/tools/extras/oem-usb.html#Win7