Develop Reference

Assigning a rare drop chance to object in simple Actionscript 3.0 game

I am pretty new to all this Flash CS6 Action script 3.0 stuff and I was hoping to find out some different ways to apply a rare drop chance on an movie clip array for AS3. I have a random chance code that works pretty well for enemies, as they fall more often, however I'd like hearts to fall rarely for my player to catch and gain a life.
Here is the code I have so far, it drops far too many hearts. I've tried fiddling with the numbers but I only seem to make it worse. Any suggestions?
function makeHeart():void
{
var chance:Number = Math.floor(Math.random() * 60);
if (chance <= 1 + level)
{
var tempHeart:MovieClip;
tempHeart = new Heart();
tempHeart.speed = 3;
tempHeart.x = Math.round(Math.random() * 800);
tempHeart.cacheAsBitmapMatrix = tempHeart.transform.concatenatedMatrix;
tempHeart.cacheAsBitmap = true;
trace("tempHeart");
addChild(tempHeart);
hearts.push(tempHeart);
}
}

Well, this is either too simple of a question, or I just didn't understand it.
If I did however understand it correctly, here's the way out:
Let's say you want to have a 1% chance of a falling heart. Since you're using a Number class for your chance variable, and Math.random() returns a Number as well, you don't need any transformations.
Math.random() returns a Number (float) between 0 and 1, not including 1
so your code for 1% could look something like this:
var chance:Number = Math.random();
if (chance <= 0.01)
{
//enter code here
}
And yes, since you call less unneeded functions, it works faster.
Math.random() gives a very precise number, far beyond 1/100, so it's possible to make a much less number for chance possibility, here's one value returned from Math.random():
Math.random(); // 0.9044877095147967

Constant and probably inaccurate Frame Rate

I am using the following code to calculate Frame Rate in Unity3d 4.0. It's applied on a NGUI label.
void Update () {
timeleft -= Time.deltaTime;
accum += Time.timeScale/Time.deltaTime;
++frames;
// Interval ended - update GUI text and start new interval
if( timeleft <= 0.0 )
{
// display two fractional digits (f2 format)
float fps = accum/frames;
string format = System.String.Format("{0:F2} FPS",fps);
FPSLabel.text = format;
timeleft = updateInterval;
accum = 0.0F;
frames = 0;
}
}
It was working previously, or at least seemed to be working.Then I was having some problem with physics, so I changed the fixed timestep to 0.005 and the Max timestep to 0.017 . Yeah I know it's too low, but my game is working fine on that.
Now the problem is the above FPS code returns 58.82 all the time. I've checked on separate devices (Android). It just doesn't budge. I thought it might be correct, but when I saw profiler, I can clearly see ups and downs there. So obviously it's something fishy.
Am I doing something wrong? I copied the code from somewhere (must be from the script wiki). Is there any other way to know the correct FPS?
By taking cues from this questions, I've tried all methods in the first answer. Even the following code is returning a constant 58.82 FPS. It's happening in the android device only. In the editor I can see fps difference.
float fps = 1.0f/Time.deltaTime;
So I checked the value of Time.deltaTime and it's 0.017 constant in the device. How can this be possible :-/

It seems to me that the fps counter is correct and the FPS of 58.82 is caused by the changes in your physics time settings. The physics engine probably cannot finish its computation in the available timestep (0.005, which is very low), and that means it will keep computing until it reaches the maximum timestep, which in your case is 0.017. That means all frames will take 0.017 plus any other overhead from rendering / scripts you may have. And 1 / 0.017 equals exactly 58.82.
Maybe you can fix any problems you have with the physics in other ways, without lowering the fixed timestep so much.

How to collide objects with high speed in Unity

I try to create game for Android and I have problem with high speed objects, they don't wanna to collide.
I have Sphere with Sphere Collider and Bouncy material, and RigidBody with this param (Gravity=false, Interpolate=Interpolate, Collision Detection = Continuous Dynamic)
Also I have 3 walls with Box Collider and Bouncy material.
This is my code for Sphere
function IncreaseBallVelocity() {
rigidbody.velocity *= 1.05;
}
function Awake () {
rigidbody.AddForce(4, 4, 0, ForceMode.Impulse);
InvokeRepeating("IncreaseBallVelocity", 2, 2);
}
In project Settings I set: "Min Penetration For Penalty Force"=0.001, "Solver Interation Count"=50
When I play on the start it work fine (it bounces) but when speed go to high, Sphere just passes the wall.
Can anyone help me?
Thanks.
Edited
var hit : RaycastHit;
var mainGameScript : MainGame;
var particles_splash : GameObject;
function Awake () {
rigidbody.AddForce(4, 4, 0, ForceMode.Impulse);
InvokeRepeating("IncreaseBallVelocity", 2, 2);
}
function Update() {
if (rigidbody.SweepTest(transform.forward, hit, 0.5))
Debug.Log(hit.distance + "mts distance to obstacle");
if(transform.position.y < -3) {
mainGameScript.GameOver();
//Application.LoadLevel("Menu");
}
}
function IncreaseBallVelocity() {
rigidbody.velocity *= 1.05;
}
function OnCollisionEnter(collision : Collision) {
Instantiate(particles_splash, transform.position, transform.rotation);
}
EDITED added more info
Fixed Timestep = 0.02 Maximum Allowed Tir = 0.333
There is no difference between running the game in editor player and on Android
No. It looks OK when I set 0.01
My Paddle is Box Collider without Rigidbody, walls are the same
There are all in same layer (when speed is normal it all works) value in PhysicsManager are the default (same like in image) exept "Solver Interation Co..." = 50
No. When I change speed it pass other wall
I am using standard cube but I expand/shrink it to fit my screen and other objects, when I expand wall more then it's OK it bouncing
No. It's simple project simple example from Video http://www.youtube.com/watch?v=edfd1HJmKPY
I don't use gravity

See:
Similar SO Question
A community script that uses ray tracing to help manage fast objects
UnityAnswers post leading to the script in (2)
You could also try changing the fixed time step for physics. The smaller this value, the more times Unity calculates the physics of a scene. But be warned, making this value too small, say <= 0.005, will likely result in an unstable game, especially on a portable device.
The script above is best for bullets or small objects. You can manually force rigid body collisions tests:
public class example : MonoBehaviour {
public RaycastHit hit;
void Update() {
if (rigidbody.SweepTest(transform.forward, out hit, 10))
Debug.Log(hit.distance + "mts distance to obstacle");
}
}

I think the main problem is the manipulation of Rigidbody's velocity. I would try the following to solve the problem.
Redesign your code to ensure that IncreaseBallVelocity and every other manipulation of Rigidbody is called within FixedUpdate. Check that there are no other manipulations to Transform.position.
Try to replace setting velocity directly by using AddForce or similar methods so the physics engine has a higher chance to calculate all dependencies.
If there are more items (main player character, ...) involved related to the physics calculation, ensure that their code runs in FixedUpdate too.
Another point I stumbled upon were meshes that are scaled very much. Having a GameObject with scale <= 0.01 or >= 100 has definitely a negative impact on physics calculation. According to the docs and this Unity forum entry from one of the gurus you should avoid Transform.scale values != 1
Still not happy? OK then the next test is starting with high velocities but no acceleration. At this phase we want to know, if the high velocity itself or the acceleration is to blame for the problem. It would be interesting to know the velocities' values at which the physics engine starts to fail - please post them so that we can compare them.
EDIT: Some more things to investigate
6.7 m/sec does not sound that much so that I guess there is a special reason or a combination of reasons why things go wrong.
Is your Maximum Allowed Timestep high enough? For testing I suggest 5 to 10x Fixed Timestep. Note that this might kill the frame rate but that can be dfixed later.
Is there any difference between running the game in editor player and on Android?
Did you notice any drops in frame rate because of the 0.01 FixedTimestep? This would indicate that the physics engine might be in trouble.
Could it be that there are static colliders (objects having a collider but no Rigidbody) that are moved around or manipulated otherwise? This would cause heavy recalculations within PhysX.
What about the layers: Are all walls on the same layer resp. are the involved layers are configured appropriately in collision detection matrix?
Does the no-bounce effect always happen at the same wall? If so, can you just copy the 1st wall and put it in place of the second one to see if there is something wrong with this specific wall.
If not to much effort, I would try to set up some standard cubes as walls just to be sure that transform.scale is not to blame for it (I made really bad experience with this).
Do you manipulate gravity or TimeManager.timeScale from within a script?
BTW: are you using gravity? (Should be no problem just

Android Game Development: Collision Detection Failing

I am currently developing a game for Android, and I would like your expertise on an issue that I have been having.
Background:
My game incorporates frame rate independent motion, which takes into
account the delta time value before performing necessary Velocity
calculations.
The game is a traditional 2D platformer.
The Issue:
Here's my issue (simplified). Let's pretend that my character is a square standing on top of a platform (with "gravity" being a constant downward velocity of characterVelocityDown).
I have defined the collision detection as follows (assuming Y axis points downwards):
Given characterFootY is the y-coordinate of the base of my square character, platformSurfaceY is the upper y-coordinate of my platform, and platformBaseY is the lower y-coordinate of my platform:
if (characterFootY + characterVelocityDown > platformSurfaceY && characterFootY + characterDy < platformBaseY) {
//Collision Is True
characterFootY = platformSurfaceY;
characterVelocityDown = 0;
} else{
characterVelocityDown = deltaTime * 6;
This approach works perfectly fine when the game is running at regular speed; however, if the game slows down, the deltaTime (which is the elapsed time between the previous frame and the current frame) becomes large, and characterFootY + characterVelocityDown exceed the boundaries that define collision detection and the character just falls straight through (as if teleporting).
How should I approach this issue to prevent this?
Thanks in advance for your help and I am looking forward to learning from you!

What you need to do is to run your physics loop with constant delta time and iterate it as many time as it need with current tick.
const float PHYSICS_TICK = 1/60.f; // 60 FPS
void Update( float dt )
{
m_dt += dt;
while( m_dt > PHYSICS_TICK )
{
UpdatePhysics( PHYSICS_TICK );
m_dt -= PHYSICS_TICK;
}
}
There are various technics used to handle the tick left ( m_dt )
Caps for miniumum tick and maximum tick are also a must.

I guess the issue here is that slowdowns are inevitable. You can try and optimize the code but you'll always have users with slow devices or busy sections of your game where it takes a little longer than usual to process it all. Instead of assuming a consistent delta, assume the opposite. Code under the realization that someone could try installing it on an abacus.
So basically, as SeveN says, make your game loop handle slowdowns. The only real way to do this (in my admittedly limited experience) would be to place a cap on how large delta can be. This will result in your clock not running on time exactly, but when you think about it, that's how most games handle slowdown. You don't fire up StarCraft on your pentium 66 and have it run at 5 FPS but full speed, it slow down and processes it as normal, albeit at a slideshow.
If you did such a thing, during periods of slowdown in your game, it'd visibly slow down... but the calculations should still all be spot on.
edit: just realised you're SeveN. Well done.

Android: How to find the frame rate of a device?

Frame rate: I'm referring to the rate at which display changes. i.e. Ondraw() is called and the canvas is redrawn.
Is there a default rate for all android devices ? As this rate depends on the processing power of the device , How to find out the frame rate of a device , before starting to program for that mobile device ?

This may be a follow-up to this question, where I suggested that having a redraw loop that just kept drawing over and over again might be a bit excessive. There may be an api to find out the capabilities of the devices display, but if there is I'm not aware of it. When you're writing your own event loop / thread function you can control the framerate by how often you call your 'draw' method. Typically, I think for most purposes, you would be ok with a refresh rate of 30 or so. If you're writing a fast action game, that needs rapid animation then you may want to run as fast as you can, the more fps, the smoother it will be.
A typical event loop (thread run function) might look something like this:
// define the target fps
private static final int UPDATE_RATE = 30; // Frames per second (fps)
public void run() {
while(running) { // volatile flag, set somewhere else to shutdown
long beginTimeMillis, timeTakenMillis, timeLeftMillis;
// get the time before updates/draw
beginTimeMillis = System.currentTimeMillis();
// do the thread processing / draw
performUpdates(); // move things if required
draw(); // draw them on the screen
// get the time after processing and calculate the difference
timeTakenMillis = System.currentTimeMillis() - beginTimeMillis;
// check how long there is until we reach the desired refresh rate
timeLeftMillis = (1000L / UPDATE_RATE) - timeTakenMillis;
// set some kind of minimum to prevent spinning
if (timeLeftMillis < 5) {
timeLeftMillis = 5; // Set a minimum
}
// sleep until the end of the current frame
try {
TimeUnit.MILLISECONDS.sleep(timeLeftMillis);
} catch (InterruptedException ie) {
}
}
}

You can use the dumpsys tool provided by Android. To obtain information about the display of the device execute the command:
adb shell dumpsys display
The information about the frame rate of the device is provided in the attribute "mPhys".
You will find something like:
mPhys=PhysicalDisplayInfo{1080x1920, 60.000004 fps, densitiy 3.0,
480.0x480.0 dpi, secure true}
The frame rate of the device is in the second field, in my case is 60.000004 fps

You can't rely on a certain framerate. Android is a using multitasking operating system. If there are some threads running in the background that do some heavy lifting, you might not be able to reach the framerate you want. Even if you're the only active process, the framerate depends on your GPU and CPU, and the clock of each. Maybe the user has a hacked ROM that changes the clock to a custom value.
Some phones might be locked to a certain framerate. The HTC EVO was locked to 30fps for the longest time, until custom ROMs came out that removed that limitation. Newer EVO ROMs also removed that limitation.
I don't know what you're trying to do, but your best bet is to measure the time after each frame and use that delta for your animations. If you're trying to display the FPS, then use a smoothed average.

There is a simple tricky way to find device FPS during runtime.
Just call the following method:
long oneSecondLater=0;
int FPS=0;
int counter=0;
ValueAnimator v_animator;
private void logFPS()
{
oneSecondLater = System.currentTimeMillis()+1000;
v_animator = ValueAnimator.ofFloat(0.0f, 1.0f);
v_animator.setRepeatCount(ValueAnimator.INFINITE);
v_animator.addUpdateListener(new ValueAnimator.AnimatorUpdateListener() {
#Override
public void onAnimationUpdate(ValueAnimator animation) {
FPS++;
if(System.currentTimeMillis() > oneSecondLater)
{
counter++;
if(counter>1)//ignore the first onAnimationUpdate call (it is not correct)
Log.i("checkFPS","FPS:" + FPS);
FPS=0;
oneSecondLater = System.currentTimeMillis()+1000;
}
}
});
v_animator.start();
}
I log FPS every second, The output of my Logcat was as follows
It works because for ValueAnimator, onAnimationUpdate() method will call according to device FPS;

This might be an old question, but for future reference, I found this library named Takt
https://github.com/wasabeef/Takt.
Takt is Android library for measuring the FPS using Choreographer.