When I am trying to run the application on my device instead of Android Virtual Device It gives the error and stops running.
Showing these messages on console.
open: Permission denied
pkg: /data/local/tmp/com.example.android.sunshine
Failure [INSTALL_CANCELED_BY_USER]
$ adb shell pm uninstall com.example.android.sunshine
Unknown failure (Failure)
Go to Additional settings then select Install via USB.
I have also flashed my device with MIUI9 beta ROM and faced this issue. I got a solution to fix this bug.
Download Plex VPN from Playstore and signup.
Select China - Shenzen server and hit connect. Once it connected successfully now go to Developer Options and switch to Install via USB.
ref. Image:
Related
I am getting the list of adb devices. But when I try to install the apk I get error:
connect error for write: closed
Image:
you should just use "apply update from adb" in recovery mode for installing new OS versions or something.
If you just want to install an .apk, start the device normally, activate the developer options and after that activate usb-debugging. Then try again adb devices and after that you could install the .apk, while the device is started "normally" (no recovery mode).
Hope this helps
I'm getting the next error, I have tried: deleting the app, cleaning the project, also allowing the 'Unknown sources' in the phone settings but i get the same error with all the apps, even the new apps that i try to install just to test.
Also in the Console i get this error:
11/27 17:19:48: Launching app
$ adb push C:\Users\ozkr2805\AndroidStudioProjects\Test\app\build\outputs\apk\debug\app-debug.apk /data/local/tmp/ink.test
$ adb shell pm install -t -r "/data/local/tmp/ink.test"
Error while accessing provider:com.rscja.secapp.provider.authcode
java.lang.IllegalStateException: Could not find provider: com.rscja.secapp.provider.authcode
at com.android.commands.pm.Pm$Command.execute(Pm.java:173)
at com.android.commands.pm.Pm.main(Pm.java:252)
at com.android.internal.os.RuntimeInit.nativeFinishInit(Native Method)
at com.android.internal.os.RuntimeInit.main(RuntimeInit.java:276)
pkg: /data/local/tmp/ink.test
Success
Error while Installing APK
The device i have is: Chainway C71 Handheld Computer, don't know if this helps.
Thank you for any advice!
I'm having the same problem. I have re-installed android studio and done a factory reset on the device, but it still fails. After flashing my smartphone the problem is fixed.
hi I am new to app programing, I have a Redmi 1s phone. so to load my app fro android studio I connected y phone and clicked the play button. everything looked good but the app didn't install giving the following error.
if the app is already there uninstall it, even though this was the first time I clicked play, any how I clicked on uninstall and checked the error report I showed me this .
06/19 10:36:55: Launching app
$ adb push C:\Users\ubrbcca\AndroidStudioProjects\HAPPYBIRTHDAYAADHYA\app\build\outputs\apk\app-debug.apk /data/local/tmp/com.example.android.happybirthdayaadhya
$ adb shell pm install -r "/data/local/tmp/com.example.android.happybirthdayaadhya"
open: Permission denied
open: Permission denied
pkg: /data/local/tmp/com.example.android.happybirthdayaadhya
Failure [INSTALL_CANCELED_BY_USER]
Error while Installing APK
plz help me out
Check the followings:
Go to Settings -> Permissions -> Install via USB: Uncheck your App if it's listed.
Go to Settings -> Additional Settings -> Privacy: Check the Unknown Sources option.
Finally go to Settings -> Additional Settings -> Developer options: Check the Install via USB option.
And
Turn off Miui Optimizations on Developer Settings, then Restart the phone.
I went into the cyanogen recover menu and did a full factory reset before upgrading to LinageOS. Now when I try to sideload a package to the phone is shows "E: Signature Verification Failed"
Also, when I type
adb devices
I get back
List of devices attached
1a1e7719 unauthorized
Any help please! There is no OS to boot to so I cannot enable/disable USB Debugging etc.
Also, when I try to adb push I get the following
error: device unauthorized.
This adbd's $ADB_VENDOR_KEYS is not set; try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.
List of devices attached
1a1e7719 unauthorized
This means the rsa fingerprint on your computer and the device didn't authorize the computer. This is adb failure.
In Developer Options > USB Debugging > Revoke Permissions
Turn off USB Debugging
Install ADB/Fastboot properly Full article here
Windows:
Re install adb/fastboot [Download here][2]
Ensure your device drivers are recognized by the computer. Else
download accordingly
Connect the device to computer and turn on USB Debugging.
You should some message which asks you permission to authorize and it is advisable to click on "Allow always"
adb devices
Ubuntu:
Open terminal and type sudo su
adb kill-server
adb devices
If you're able to see your device code with a name, Et Voila.
16-10-14-04
You find linageOS community help on reddit or help with Report bugs, find info here: https://wiki.lineageos.org/
I think you can copy the current linage os on the sd card and fresh install it from the recovery (TWRP)? which device do you use?
And disable zip verification in TWRP...
I use Motorola XT910, called umts_spyder.
I want to make a simple batch script to install apk on android device. I can do this if Debugging is on and Device drivers are installed.
When device drivers are not installed it show error device not found and when debug acces is not allowed it show please allow usb debug from device.
I want to know how i can switch between these errors i want to start adbdriverinstaller.exe if no drivers are installed and if it requires usb debug access then just echo please allow usb debug access form mobile.
Here is my code
#ECHO off
echo Writing Configuration...
adb push Config.cfg /sdcard/Config.cfg
if errorlevel 1 echo Failed with error #%errorlevel%.
//here i want to switch between error types (if no device found error or allow usb debug access error)
if errorlevel 1 start "" AdbDriverInstaller.exe
if errorlevel 1 PAUSE
if errorlevel 1 EXIT
echo Installing Apk...
adb install -r myApk.apk
echo opening apk
adb shell am start -n com.myApk.myApk/.myApkActivity
PAUSE
what i want to do is
if
error: device not found
error: device not found
error arises then simply open adbdriver installer and if
error: device unauthorized. Please check the confirmation dialog on your device.
error: device unauthorized. Please check the confirmation dialog on your device.
Error arises than simply display please allow USB debug access from mobile.
ADB on its own does not tell why it could not find the device. But you could use powershell "gwmi Win32_USBControllerDevice" to get status of USB devices in Windows. This allows you to find all enumerated adb interfaces and check whether they have appropriate drivers installed. For details read adb device detection in Windows