I want to run an app on my device to do that I am using ADB Wifi Connect plugin. Both my phone and laptop are connected to same wifi network. I am still not able to run the app on my phone. Please give an appropriate solution.
Error while connecting my Android device using ADB WIFI Connect plugin.
If you are using android studio then follow the below procedures:
Connect your smart phone with your system via physical cable.
make sure your smartphone and computer is connected via same network.
1.Open terminal in your android studio.
2. type "adb devices", which will show you the list of devices attached.
3. type "adb tcpip 5555".
4. type "adb your phone ip address:5555".
Hope this will help you
Related
How to connect mobile device wireless android studio for flutter. I try every method but am failed. When i create emulator thy run very slow beacause I think Ram issue if any other solution please guide me thank u
You can connect mobile device and debug wirelessly but you need both your laptop and mobile on the same network(WiFi).
follow these steps:
Connect your mobile through a usb cable to the device and in the terminal run the command :
adb devices
Now you will see your attached device id, like this :
list of devices attached
RZ8N904WT6Y device
Copy the device id (RZ8N904WT6Y-in my case)
Now start the device in tcpip port, like this :
adb -s <device-id> tcpip 5555
Find out the local IP address of the Android device. You can find this information by pressing/long-pressing the WiFi icon in the quick settings drop-down and then clicking the WiFi network you are connected to
Type below command to connect to the device over WiFi:
adb connect <IP address>:5555
If the command ran successfully, you can now disconnect the USB cable and enjoy debugging over WiFi
I have a situation where I need to store some data on USB. There are some errors that occur when I try to attach USB to my android device. I tried to debug my app through ADB. Here is what I have done up till now.
I have downloaded the AndroidWiFiADB plugin.
I have connected my mobile by giving commands through the terminal.
E:>adb connect 192.168.0.13:5555
connected to 192.168.0.13:5555
and it shows that my device is connected in the terminal.
E:>adb devices
List of devices attached
0123456789ABCDEF device
192.168.0.13:5555 device
But when I press the AndroidWiFiADB icon I get the following message.
"Unable to connect to device 'Signature_Touch'. Make sure that your computer
and your device is connected to the same WiFi network."
I have enabled all the possible options of wifi available in developers' options.
Follow these below steps:
Connect your phone to PC/Laptop with USB.
Open terminal, go to your AndroidSDK/platform-tools local path and type adb devices. That will list down all connected devices.
Type: adb tcpip 5555
Type: adb connect <your-ip-address>:5555
Type: adb devices. That will show your device that is connected wireless with your IP Address and Port.
Then, you can enjoy Wireless debugging.
Note: You need to have same network on your PC/Laptop and on your phone.
Before connecting through WiFi you need to connect the device using USB to authorize the PC in the device (Such thing can't be done through wifi).
Then using the terminal, ping the device's IP. Pinging must be successful.
Then restart ADB and connect to your device.
Update
Since Android 11, you can use Android studio BumbleBee to use built-in "Adb over wifi" feature
You can use ADB Wifi Connect to debug the android application via wifi. You can also find it from android studio plugins.
You have to be in the same network to use wifi debugging.
May be help you.
Your Computer and Your Device should be connected to the same network. So that your device can be able to make a bridge connection with your computer.
I am unable to debug over wifi.
I have followed below steps.
Go to Android Sdk-> Platform-tools and type cmd
run adb tcpip 5555
adb connect and MY IP ADDRESS
Now i got the result show in below Image.
After my device is connected. I removed my USB cable then i got device list empty.
I have no idea why this is happening.
I have motorola X play Mobile Phone Android 6.0 and having Windows 10 operating System.
Need Help.
For simple one click connection of ADB over wifi - You can try using the Android ADB Plugin from JetBrains. The plugin will internally handle all the setup and you can click-away and connect to adb over wifi without worrying about anything else. Steps to install and use can be found on its GitHub repo page.
Provides an action which allow you quickly connect your Android device
over WiFi to install, run and debug your applications without a USB
connected by pressing one button. Connect your device using a USB
cable and press the Android WiFi ADB button. Once the device be
connected over WiFi you'll see an IntelliJ/Android Studio
notification. Now you can disconnect your USB cable and enjoy
deploying, running and debugging your applications over WiFi. The
version 2.0 enables a window to check which of your devices are
connected or not and connect/disconnect it manually if needed.
Screenshots from the plugin page:
Sorry for the nooby question, I am having trouble sorting this out using the web.
I am trying to simply connect my device to my pc via adb to debug my application.
My device is rooted. Adb debugging is enabled. I downloaded an adb running application and started ADB.
Now i am trying adb connect ip:5555. and keep on getting "unable to connect to ip:5555" ...
Same happend when i try to connect via usb.
c:\>adb connect 192.168.20.191:5555
unable to connect to 192.168.20.191:5555
Help...?
EDIT:
C:>adb devices
List of devices attached
06fecaa1 unauthorized
Launching Cordova
Open Node.js / CMD
Point to "the directory where you have located your source folder" >>> C:\Projects\RJX
Enable Wifi
Turn on Developer Option under settings
Enable / Check USB Debugging Option under settings (Google if cannot find this option)
Enable / Check the MTP Option under settings (Google if cannot find this option)
ADB Commands
adb kill-server
adb start-server
//plug off cable from mobile and plug in again if you connected your device earlier
//Uninstall the application from mobile if you already installed. (if necessary)
adb tcpip 5555
adb connect "ip" //adb connect 192.192.2.128
adb devices //to check device details
cordova run android --device
if this steps are not worked, try to close the cmd and do it again. Sometimes it needs some refresh.
**Android devices version 4.0.4 and after should be no problem if you follow these steps.
I will assume you are able to understand adb connect / ip's etc I won't bore you with that
but there are two lame "gotcha's"
THE GENYMOTION GOTCHA
genymotion WRECKS a lot of this sometimes.. I am sorry but it does.. it has a "I know what I am doing I am taking over" mentality.. sadly it doesn't know what it's doing :-P often you have to turn off genymotion for the adb->usb to work.. basically connect phone FIRST ... make sure it's there in eclipse (adb kill-server / start server if needs be ), then AND ONLY THEN then genymotion AFTER
THE OOPS [/facepalm] GOTCHA
check that your phone it isn't in Windows merely as a "Camera" - go to My Computer and look. If it looks like this pic it's that you're not running Samsung Kies(/disabled because it's annoying) the phone still goes "blub bling" when you plug it in, it may be connected via wifi so have a LAN ip but it is NOT really "connected" to ur PC. instead run/download/update this (with phone disconnected) then make sure Kies is happy AND MAKE SURE MTU is enabled
This error happened to me when PC was (accidentally) NOT in the same network as Android. When I logged on Android to the same WIFI network as PC it now works perfect and I don't have this problem.
The answer here is that it's not listening on the correct (default) port. So you need to set the TCP/IP port to 5555. Connect your device via USB and issue the following command in cmd (terminal):
adb tcpip 5555
Following this your adb connect should work fine, e.g.:
adb connect 192.168.0.n
Hope this fixes it for you.
This happened when I was previously connected with one device (e.g. apps2fire) and then tried using adb command from another machine. I rebooted the Android device and then tried again and received the prompt to allow the connection as I would have expected.
First, check your ip address in your device, then following this command.
adb kill-server
adb tcpip 5555
adb connect [your-ip-address]:5555
This question already has answers here:
Run/install/debug Android applications over Wi-Fi?
(41 answers)
Closed 6 years ago.
Is there any possible way to debug or run android apps from eclipse to my Sony Tablet S over wifi rather than USB without rooting the device?
There are ways to do it, if the device is rooted. However, I am seeking the solution in a device that is not rooted.
Disconnect device from usb then tell it to listen on 4455
adb tcpip 4455
restarting in TCP mode port: 4455
connect to the device using a specified ip:port. my device is using wifi
adb connect 192.168.1.103:4455
connected to 192.168.1.103:4455
now do normal adb commands over tcp like
adb shell
when your done, you can put it back in USB mode
adb usb
restarting in USB mode
After a bit of dabbling with testing I successfully managed to connect a Sony Tablet S over ADB following this procedure, when both the computer and the tablet were on the same wifi network. I used an Xperia T as a tethering point between a laptop and the Tablet S. I followed the same procedure on an Xperia Tablet S and an Xperia S as well.
Connect the Sony Tablet S through USB to a computer, make sure you have ADB debugging enabled on the tablet.
On the computer, execute "adb devices", verifying the tablet is showing up in the list of available devices.
Execute "adb tcpip [port]" while the tablet is connected to the computer, verifying you get a response "restarting in TCP mode port: [port]"
Disconnect from the device from the computer it was connected to.
From a host located on the same wifi network, execute "adb connect [ip to device]:[port]", verifying you get a response "connected to [ip to device]:[port]"
In the end I launched Eclipse, created a test project and tried launching the project. The project installed and launched automatically from Eclipse. I also tested this for debugging and that worked equally well.
Finally After lots of search, here is the consolidated, short tutorial about "Wireless Debugging with Android without rooting" your android phone.
Steps:
Make sure your Phone and your PC/Laptop is connected in the same network.
Find your Android Device's IP Address: Go to Settings > About Phone > Status. Note down it.
Ping Test: Lets first check if your phone is accessible from your PC/Laptop to do this ping your Android Device and check its response. See Notes if ping is unsuccessful.
e.g: ping 192.168.1.55
Connect your Android Device Via USB in USB Debugging Mode.
Open command prompt and cd into <Android SDK Folder>\platform-tools directory and run the following commands.
adb tcpip 5555
adb connect DEVICE_IP_ADDRESS_HERE:5555
If you want to switch back to USB mode, use the following command.
adb -s DEVICE_IP_ADDRESS_HERE:5555
Disconnect Android Device from USB. If everything is fine, you can Wirelessly debug your Android Apps!
Notes:
If ping is unsuccessful, Make sure Wireless (WiFi) devices and wired devices are not isolated. If Isolated, you need to disable isolation. Router Mfgrs calls it as AP Isolation. There will be a setting in Router's Wireless Configuration page. I have D-Link Router, I unchecked the Enable MultiAP Isolation setting in Wireless Basic Setup Page.
I personally felt this method of connecting is taking more time.. so, I configured my android device so it uses static IP like 192.168.1.55 to connect to my router and I made a windows batch file like below,
#echo off
cd C:\AndroidSDK\platform-tools\
echo make sure your your Phone is connected in USB Debugging Mode.
pause
adb kill-server
adb tcpip 5555
adb connect 192.168.1.55
pause
so, every time I have just need to plug in my device, and double click the batch file and all done automatic :P !
(No root required) There is one best, easy and with UI method for Android Studio
IntelliJ and Android Studio plugin created to quickly connect your Android device over WiFi to install, run and debug your applications without a USB connected. Press one button and forget about your USB cable.
just install plugin Android WiFi ADB
Download and install Android WiFi ADB directly from
Intellij / Android Studio: Preferences/Settings->Plugins->Browse Repositories
.
Remember! for first time to initialize the device you must have to connect using usb
Alternatively, you can download the plugin from the JetBrains plugin site and install it manually in: Preferences/Settings->Plugins->Install plugin from disk.
for more information read here https://github.com/pedrovgs/AndroidWiFiADB