Related
On my pixel3a phone running Android Pie, I tried to adb connect to the phone using my macbook pro and it gave me a connection refused error
"failed to connect to '192.168.xx.xxx:5555': Connection refused".
My macbook can adb connect to my other Android Pie and Oreo devices, therefore, I think the problem might be on the pixel3a phone side.
I'm guessing the debugging services is not running or somehow blocked on pixel3a which is why I keep getting connection refused.
NOTE: developer mode has been turned on and debugging over USB option has been turned on as well.
Anyone ran into similar issue? Thanks.
Btw, I tried to:
restart macbook and pixel3a.
connect through USB and Wifi.
look through to see if there is any app with the open port 5555 on the phone but none found.
see if there is anything open that looks like an adb debug using other ports than 5555 but don't see anything that looks like it.
turn off the developer/debugging mode then turn it back on again but still not working
p.s. I just got the phone and enabling the developer mode was the first thing I did. I did not install any firewall or other apps besides the network monitor apps after I see the connection refuse error.
This happens after a long period of inactivity. You need to restart the tcpip connection on port 5555.
Connect the phone to the computer via USB. Then in terminal navigate to platform-tools and insert the command...
./adb usb
expect the response restarting in USB mode
Then ..
./adb tcpip 5555
and expect the response restarting in TCP mode port: 5555
You can now check your device ip address and add it..
./adb connect 192.168.86.40:5555
ps. If you added the path to bashrc, no need to go to the platform-tools folder, just replace the ./adb with adb .
It seems that wireless ADB has more and more issues each time I update Android Studio. Using 2.1.1, I'm now unable to connect to my tablet using the command:
adb connect <ip addr>
It results in the error:
unable to connect to <ip addr>:5555: cannot connect to <ip addr>:5555: No connection could be made because the target machine actively refused it. (10061)
This happens directly after approving the connection in the dialog box on the tablet. Before today I was forced to do an adb kill-server prior to attempting to connect to the tablet but now that doesn't even help.
Generally you can say this error is network related, check these items first:
make sure your computer and your device can see each other in network mostly this means they are connected to the same router, but in more advanced scenarios your device may be connected to a wireless router and you computer may be connected to you Local Area Network. what is important is they can see each other. you can check this by pinging you device ip address from you computer.
make sure there is no conflict with ip addresses, this might be very simple. but if you do not use DHCP server and you enter the ip addresses in you devices you could mistakenly entered same ip address in different devices
when you are sure about the network issues redo the famous steps
So when you connected by USB follow these commands:
stay connect via USB
connect to your WIFI network (computer and mobile device both)
ping DeviceIP (must be have ping to your device)
adb kill-server
adb usb
adb tcpip 5555
unplug usb cable (as per #captain_majid 's comment)
adb connect yourDeviceIP
adb devices (must be see two device names , one of them is by deviceIP)
unplug USB cable
Steps from could not connect to tcp:5037: cannot connect to 127.0.0.1:5037: No connection could be made because the target machine actively refused it. (10061)
when restart device then your port also channge so hit command below
1- adb kill-server
2- connect your phone to pc with usb cable
3- adb tcpip 5555
4- adb connect (your device ip):5555
Device and PC are connected to same network connection.
1 stay connect via USB
2 adb kill-server
3 adb usb
4 adb tcpip 5555
5 adb connect 192.168.43.1:5555
6 adb devices (must be see two device names , one of them is by deviceIP)
7 unplug USB cable
I had the same issue. These steps worked for me:
connect your device with usb
when your cmd already in AppData\Local\Android\Sdk\platform-tools>,type adb tcpip 5555
the cmd will show restarting in TCP mode port: 5555
type adb connect 192.168.43.1:5555
Hope this can solve your issue.
I recently faced the same problem.
It occurs because your device and PC are connected to different Networks.
when restart device then your port also channge so hit command below
1- adb kill-server
2- adb tcpip 5555
3- adb connect (your device ip):5555
I got this error when I had Bluestacks emulator started together with my phone attached.
When I typed in command prompt adb devices I could see two devices:
adb devices
List of devices attached
dfdcdc9c device
emulator-5554 device
Before typing adb connect I had to type -s and device ID:
adb -s dfdcdc9c tcpip 5555
adb -s dfdcdc9c connect <ip addr>
In case of me, i tried different port 5557 than again 5555,
adb tcpip 5557
adb connect device_ip_address
gives same error(10061) than again tried with,
adb tcpip 5555
adb connect device_ip_address
result: connected
that works for me(while the other thing is ok like as developer option is on and connected to same wifi)
Make sure you have to connect your phone through a USB cable for the first time.
Using Command prompt, Go to your Android SDK Directory (sdk->Platform-tools) and then
run the following commands
1- adb kill-server
2- adb tcpip 5555
3- adb connect 192.168.1.130 (Replace IP Address with your phone IP)
4- Now you can unplug it.
5- Then go to the Android studio and choose the device with IP address in
Run
Dropdown. Hope this will help it for everyone.
And then for next times just runs following command
adb connect 192.168.1.130:5555
Note: If Device is not showing in Android studio devices dropdown then
connect **USB** and run following commands
1-adb kill-server
2-adb usb
3-adb tcpip 5555
4-adb connect 192.168.1.130:5555
You must connect the mobile device via USB first, then type adb tcpip 5555 ,
and then enter your device IP adb connect <your_device_ip>
I solved the problem by enabling USB Debugging in Developer Options.
Unfortunately this issue can be caused by different reasons.
One of the reasons - make sure previous communication is disconnected.
USE:
1. adb kill-server
2. Issue command adb disconnect after restarting adb server. Do same thing after finishing job
3. run adb remount
4. adb tcpip 50555 (I usually use higher port number)
5. unplug USB cable
6. adb connect device_ip:50555
when done run adb disconnect
Following steps are standard ones to follow( mostly same as previous answers):-
adb tcpip 5555.
adb connect your_device_ip_address.
adb devices (to
see if devices got connected).
But in some cases above steps gives error like "unable to connect to device. Make sure that your computer and your device are connected to the same WiFi network." And you notice the devices are already on the same network.
In this case, install this plugin "Wifi ADB Ultimate" and follow below steps.
Connect the device once through USB.
Refresh the list to check whether its connected.
Go to About Phone > Status > IP Address and note your IP
address(e.g. 198.162.0.105).
Come back to Android Studio and fill in this IP as done in below
photo and hit the run button.
I had same issue with Android Studio 3.5.2, here is how i solved it.
First you must connect your device via USB once. (Debugging mode starts only when usb is connected)
Go to command prompt :
adb tcpip 5555
(watch for port on which adb started)
then : adb connect :
After successful connection goto Studio>Run>Select Device.
I assume you already solved the problem by now. but here is the way to avoid the problem if you are using multiple devices. I used to have the same issue so many times until I understand, how it works.
I was also trying to connect multiple devices one after another or trying to connect the same device after a while.
Always make sure to disconnect the older device before you connect the new device:
adb disconnect
after that, you will be easily able to connect new device:
adb tcpip 5555
adb connect <your_device_ip>
you can always try to ping the device using the ping command, if the ping is not getting acknowledgment then you must have connected to different wifi then your laptop or you haven't connected to wifi at all:
ping <your_device_ip>
For anyone who is Android 11+
Enable Developer Options
Enable Wireless Debugging
Allow wireless debugging on this network.
Pair Device with Pairing code
Type in adb pair [Phone_IPAddress]:[PORT] [PAIRING CODE]
After Successfully Pairing. Type adb connect [Phone_IPAddress]:[PORT]
For more info: ADB Documentation
Usually the 'target machine actively refused it' message is displayed when the target machine's 'ADB debugging' feature is not turned ON. It is turned off by default in almost all devices unless we enable 'developer options'. So whenever you land on this error, make sure you go to the settings of your target machine and trickle to the developer/development area and somewhere there should be a place to enable ADB.
After weeks of struggle and trying different approaches while everything was right and on the same network (ping {ip} was coming back positive) I figured the dumb debug bridge does not look for all network adapters to find the device! The device got connected when I manually disabled all other network adapters except the one (WiFi adapter) which was required to connect.
Step 1. Type command in terminal adb tcpip 5555
Step 2. Type command in terminal adb connect <your_phone_ip>:5555
Now check in studio device Monitor tool your phone connected without wire.
Note :- Most important your Laptop & Mobile Device Connected with same Network
I had the same issue and I thought it might be because of the network and tried many solutions but didn't work. Lastly, I checked my IP address which was updated for my device and was the root cause for this.
So please check the IP address first and use adb tcpip <port> to start listening the connection and adb connect <IP>:<PORT>
Try this way change adb to .\adb
PS C:\users\mori\appdata\local\android\sdk\platform-tools> .\adb kill-server
PS C:\users\mori\appdata\local\android\sdk\platform-tools> .\adb usb
PS C:\users\mori\appdata\local\android\sdk\platform-tools> .\adb tcpip 5555
PS C:\users\mori\appdata\local\android\sdk\platform-tools> .\adb connect 192.168.1.34:5555
connected to 192.168.1.34:5555
I had a similar problem. I found out the problem was if I had other devices/emulators connected to the adb already, the "adb connect <ip_addr>" command would give me the "No connection could be made because the target machine actively refused it" message.
The solution is to make sure all the other devices/emulators are disconnected (either physically disconnect or quit the emulator application) before running adb connect <ip_addr>. You can then reconnect your other devices (if you need them reconnected). A total pain.
Your mileage to this solution may vary depending on your problem.
I got this error when trying to establish an ADB connection to a smartwatch with WearOS 1.0 (Huawei Watch 2) via WiFi. Enabling the menu entry for fixing some WLAN issue ("Fix error via WLAN" -- my own rough translation of the German caption "Fehler über WLAN beheben") in the "Developer options" on the WearOS device solved the issue for me.
I had the same issue. It was working perfectly for a month, and then one day it stopped working. I tried all the solutions above, but to no avail. Then, I noticed that for some reason, the IP address of my phone had changed, ending with the number 1 instead of 0. So I connected to the new address with 1 as the last digit in the address and now it works again. Weird.
In my case I played with my device long enough to somehow mess up adb deamon, so port number was not set up correctly anymore.
getprop service.adb.tcp.port returned empty string.
So I solved this with following commands:
stop adbd
setprop service.adb.tcp.port 5555
start adbd
I ran all commands on rooted device in app that emulates command prompt.
So I came here because I want to adb shell into my physical Android phone over the network. Lots of useful answers are provided, but the most obvious fact is never stated. Here is the #0 fact:
The Android phone should ALWAYS be connected via USB to the laptop
And then another different laptop will do adb connect ...
This was not what I had in mind and all the above answers never mentioned it.
Go to Android Studio File - Settings
Next..
Happy Codding :)
I had a problem with my Huawei. For some reason I had wrong drivers, on Device Manager it was showed like "Android Phone". Then, I updated the drivers from Device Manager, I choose another driver and now it is showed as "Huawei" device.
From there I connected my device whitout problem (adb connect IP:5555)
For Android TV, Connect PC and TV in the same network (wi-fi),
enable developer option, and go to developer option and enable ADB debugging option.Then run the commands given below
1. ping <ur IP> (check the connection)
2. adb disconnect (to remove all the previous connections)
3. adb connect <Ur IP>
4. adb install app_name.apk
I have attempted to use many solutions above to no avail and found some pretty simple solution that works for myself.
If you are using a real device to debug like me, you may check the device official website to download the android USB driver for your development environment.
I'm using Samsung phone to debug and using windows as development environment thus I went here, download the Android USB Drivers for Windows and run it.
It resolves my ADB problem.
This question already has answers here:
How can I connect to Android with ADB over TCP? [closed]
(37 answers)
Closed 5 years ago.
I want to debug Android APPs on my phone (LG nexus 4). I'm travelling and I forgot my USB cable. When I work at home I can do it just connecting the USB cable and executing the command 'adb tcpip 5555'. Then I can unplug the USB cable and connect via 'adb connect IP'.
But now I cannot execute the first command because I don't have a cable. I don't understand why I have to do it every time, since I already execute the 'adb tcpip' command before.
What I tried now:
I installed a terminal application on my Android and tried to execute that command there, but I received a "device not found" error. Maybe he cannot see himself...
I search for any reasonable option in "Android Development Options" and enabled everything seemed to have relation with Wifi. But nothing helped.
I search StackOverflow, but all answers I found involving connect via USB cable before. Is there I way to do this connection without the need of a cable at all?
Some info:
My Nexus 4 isn't rooted.
The android version is 5.1.1.
The question is about a non rooted device but if it is rooted the simplest way would be to:
From the terminal on your phone, do this:
su
setprop service.adb.tcp.port 5555
stop adbd
start adbd
See this answer for full details.
For your question
Adb over wireless without USB cable at all for not rooted phones.
Old Answer:
You need to connect your device to your computer via USB cable. Make sure USB debugging is working. You can check if it shows up when running adb devices.
Open cmd in ...\AppData\Local\Android\sdk\platform-tools
Step1: Run adb devices
Ex: C:\pathToSDK\platform-tools>adb devices
You can check if it shows up when running adb devices.
Step2: Run adb tcpip 5555
Ex: C:\pathToSDK\platform-tools>adb tcpip 5555
Disconnect your device (remove the USB cable).
Step3: Go to the Settings -> About phone -> Status to view the IP address of your phone.
Step4: Run adb connect <IP address of your device>:5555
Ex: C:\pathToSDK\platform-tools>adb connect 192.168.0.2
Step5: Run adb devices again, you should see your device.
Now you can execute adb commands or use your favorite IDE for android development - wireless!
Now you might ask, what do I have to do when I move into a different workspace and change WiFi networks? You do not have to repeat steps 1 to 3 (these set your phone into WiFi-debug mode). You do have to connect to your phone again by executing steps 4 to 6.
Unfortunately, the android phones lose the WiFi-debug mode when restarting. Thus, if your battery died, you have to start over. Otherwise, if you keep an eye on your battery and do not restart your phone, you can live without a cable for weeks!
See here for more
Ref: https://futurestud.io/tutorials/how-to-debug-your-android-app-over-wifi-without-root
UPDATE 1:
If you set C:\pathToSDK\platform-tools this path in Environment variables then there is no need to repeat all steps, you can simply use only Step 4 that's it, it will connect to your device.
To set a path:
My Computer-> Right click--> properties -> Advanced system settings -> Environment variables -> edit path in System variables -> paste the platform-tools path in variable value -> ok -> ok -> ok
UPDATE 2:
Go to the android terminal
adb tcpip 5555
adb connect your_ip_address
We can do it without a USB cable at all in the following ways.
NEW UPDATE 1: (Latest Answer without using USB cable at all)
Note: It will work only when your laptop and mobile should connect to the same WiFi.
Step 1: In Android studio choose "Pair Devices Using Wi-Fi" from the Device Connections dropdown.
Step 2: In Mobile go to settings and search for "Pair using QR code" and scan the QR code
NEW UPDATE 2: (Latest Answer without using USB cable at all)
Note: It will work only when your laptop and mobile should connect to the same WiFi.
Go to developer options from the mobile settings and enable Wireless Debugging
That's it!
Had same issue, however I'm using Macbook Pro (2016) which has USB-c only and I forgot my adapter at home.
Since unable to run adb at all on my development machine, I found a different approach.
Connecting phone with USB cable to another computer (in same WiFi) and enable run adb tcpip from there.
Master-machine : computer where development goes on, with only USB-C connectors
Slave-machine: another computer with USB and in same WiFi
Steps:
Connect the phone to a different computer (slave-machine)
Run adb usb && adb tcpip 5555 from there
On master machine
deko$: adb devices
List of devices attached
deko$: adb connect 10.0.20.153:5555
connected to 10.0.20.153:5555
Now Android Studio or Xamarin can install and run app on the phone
Sidenote:
I also tested Bluetooth tethering from the Phone to Master-machine and successfully connected to phone. Both Android Studio and Xamarin worked well, however the upload process, from Xamarin was taking long time. But it works.
This might help:
If the adb connection is ever lost:
Make sure that your host is still connected to the same Wi-Fi network your Android device is.
Reconnect by executing the "adb connect IP" step. (IP is obviously different when you change location.)
Or if that doesn't work, reset your adb host:
adb kill-server
and then start over from the beginning.
If usb is not working you should checkout debugging over bluetooth (Without Rooting)
http://zcourts.com/2013/07/19/android-debugging-over-bluetooth-without-root/#sthash.hVCLtWSk.dpbs
type in Windows cmd.exe
cd %userprofile%\.android
dir
copy adbkey.pub adb_keys
dir
copy the file adb_keys to your phone folder /data/misc/adb. Reboot the phone. RSA Key is now authorized.
from:
How to solve ADB device unauthorized in Android ADB host device?
now follow the instructions for adb connect, or use any app for preparing. i prefer ADB over WIFI Widget from Mehdy Bohlool, it works without root.
from:
How can I connect to Android with ADB over TCP?
Connect android phone without using USB cable except XIAOMI PHONES
== MAKE SURE THAT YOUR PHONE HAS USB DEBUGGING ENABLED ==
== IP Address series should NOT be '0' like 192.168.0.10
1. Connect your PC (Laptop) and Android phone to same wifi network.
2. Go to the Android SDK folder > platform-tools and open command prompt by holding the shift key and right clicking on the folder.
3. Type the command "adb tcpip 5555", and hit Enter, sometimes it gives an error but ignore it and go ahead.
4. Type "adb connect [YOUR PHONE IP]". example: "adb connect 192.168.1.34" and hit enter, your phone will be connected to PC.
For some reasons, my phone does not work anymore with cable.
I saw on the Internet that it is possible to connect adb to the via Wifi, however I tried it and I get this:
adb devices
List of devices attached
192.168.1.2:5555 offline
I search this on Google and it seems that it is related to Android 4.2.2.
And indeed, my device is running Android 4.2.2.
I didn't find any answers on Google for my problem since it is always with a cable, mine is on Wifi...
Any idea how to solve this?
For me the complete steps that worked were :
Settings -> Developer options -> Revoke USB debugging authorizations (clear the list of authorized PCs).
Set USB Debugging OFF.
In Terminal write : adb kill-server
Then : adb start-server
Then : adb connect xx.xx.xx.xx:5555 (the devices ip), it should say unable to connect.
Now turn ON USB debugging again and type the adb connect xx.xx.xx.xx:5555 again.
It should now ask for authorization and you are back online without
needing to connect cable to USB, only wifi used.
run adb kill-server, then try to connect wirelessly again. It worked for me.
I could not find exact solution for this problem too.
Best way worked for me was disconnecting device from wifi, then try to connect while device is not connected to Wifi like:
adb connect 192.168.55.3:5555
this causes adb waiting for connection. immediately connect device to wifi and adb will detect device and connect again.
hope this helps.
Disconnect adb over wifi, connect your phone with a USB-cable to your pc. It will ask you on your phone is you want to allow the connection. Tick always allow. You will only get this when you connect with USB and have to do this only once, you can use over wifi afterwards.
Don't get the pop-up? Try the answers on google over a cable, since you need to do this first.
It seems you want authenticate adb over wifi.If you had your device rooted,you can try this way.
Copy ~/.android/adb_key.pub to your android device,and rename it to adb_keys
Move it to your /data/misc/adb/
Reboot your android,then reconnect over wifi.
For the first time in debug mode, you need to Authorize your phone with the PC, and that requires the USB cable. After that you can use Debug over WIFI.
If you want to force your phone to show the Authorization message box, simply delete the below file.
/data/misc/adb/adb_key
In android studio go to Preferences->Plugins
Download and install this plugin
ADB WIFI Connect
, restart Android Studio
Connect phone via USB
In android terminal use command: adb devicesyou should get visible device connected via USB:
List of devices attached
988a57334e57365058 device
Click on plugin icon in android studio AndroidWiFiADB
If phone get connected properly via WiFI, you see in event log:
12:41 Android WiFi ADB: Device 'ModelOfYourPhone' connected.
In android terminal use command: adb devices use should get
List of devices attached
988a57334e57365058 device
192.168.60.101:5555 device
Disconnect USB cable and re-check again adb devices, should remain only device connected via wifi:
List of devices attached
192.168.60.101:5555 device
Try disconnecting your device with:
abd disconnect <IP/TCP>:<port>
Then restart the WiFi connection of your device, and reconnect your device with:
abd connect <IP/TCP>:<port>
That may fix it; it worked for me.
For me, the important part turned out to be the following line adb tcpip 5555 together with using the port in the IP of my phone like so: adb connect 192.168.1.87:5555 (only using one of them, did not work, i.e: writing the second alone didn't work, writing the first and then excluding the port in the IP also didn't work). The adb tcpip 5555 line is not mentioned anywhere here. So, for me, the PORT needed to be both manually set and used in the connect line!
These are the events of my command line in Windows PowerShell Admin to demonstrate (Wifi on and debug mode on and confirmed permission when the popup came):
notice that the connection first failed, then it said it was connected which is weird behavior to begin with (no matter what, it always failed once and "succeeded" once), and in both instances, the device showed as offline. The disconnect commands also confirm that its 110% offline
PS C:\WINDOWS\system32> adb kill-server
PS C:\WINDOWS\system32> adb start-server
error: protocol fault (couldn't read status): Connection reset by peer
PS C:\WINDOWS\system32> adb start-server
* daemon not running; starting now at tcp:5037
* daemon started successfully
PS C:\WINDOWS\system32> adb connect 192.168.1.87:5555
failed to connect to 192.168.1.87:5555
PS C:\WINDOWS\system32> adb devices
List of devices attached
220947272e047ece device
192.168.1.87:5555 offline
PS C:\WINDOWS\system32> adb connect 192.168.1.87:5555
already connected to 192.168.1.87:5555
PS C:\WINDOWS\system32> adb devices
List of devices attached
220947272e047ece device
192.168.1.87:5555 offline
PS C:\WINDOWS\system32> adb disconnect 192.168.1.87:5555
error: no such device '192.168.1.87:5555'
PS C:\WINDOWS\system32> adb disconnect 192.168.1.87:5555
error: no such device '192.168.1.87:5555'
PS C:\WINDOWS\system32> adb tcpip 5555
restarting in TCP mode port: 5555
PS C:\WINDOWS\system32> adb disconnect 192.168.1.87:5555
error: no such device '192.168.1.87:5555'
PS C:\WINDOWS\system32> adb connect 192.168.1.87:5555
connected to 192.168.1.87:5555
PS C:\WINDOWS\system32> adb devices
List of devices attached
220947272e047ece device
192.168.1.87:5555 device
As soon as I added the adb tcpip 5555 command and it restarted in TCP mode port: 5555 the adb connect 192.168.1.87:5555 command worked!
Make sure that pc is authorized in the device by going to Developer options -> Revoke USB debugging authorisations and then trying to connect via USB. After accepting the PC, disconnect the cable and connect through wifi.
adb kill-server
adb run-server
adb connect IP:5555
Although in my case, when I tried to connect it failed at first and second try it said already connected.
I disconnected from the device and connected again and it solved.
adb disconnect ip:5555
adb connect ip:5555
I solve this problem for huawei P10.
its about phone's developer settings => find usb developer settings, and under usb developer setting there is a "adb debugging in charging mode..." enable it. My problem solved with this way. Hope yours too....
My solution steps:
Turn Off WiFi and Turn it back On again.
Settings -> Developer options -> Revoke USB debugging authorizations.
Settings -> Developer options -> Turn Off ADB over network and turn it back On again.
adb kill-server
adb start-server
adb connect xx.xx.xx.xx:5555
Note: Step 3 was the key for me. don't forget it.
In simple cases it will start after Enabling USB debugging
For complexities you need to delete the
adbkey
file from
C/.android and then running following commands in command prompt
adb kill-server
adb start-server
adb devices
Note that wireless adb connectivity in Android 6.0.0 is broken. Updating to 6.0.1 fixes the issue.
https://stackoverflow.com/a/34530543/1123355
In Windows, if you are using system-wide proxy software like Proxifier, you need to add adb.exe to the ingore list or direct-mode list. In my case, using Proxifier will make adb able to connect to any IP address even when the phone is not connected to the WiFi, and this leads to device offline.
I know its late to answer but I believe this is the exact answer:
go to WIFI setting on your device and "set a new IP" in your network IP range an reconnect.
Conflicting ADB connections can cause this issue as well:
Windows Host with Docker to Hyper-V Android x86 emulator
I didn't see this answer here yet so for those attempting something similar, the issue I had was that the local Windows Host ADB process had already acquired the adb connection during start up (adb server start).
By simply running: adb disconnect <Device/Android x86 Hyper-V ip>:5555
on host machine
Running adb connect <Device/Android x86 Hyper-V ip>:5555 on the Docker container was able to successfully acquire the remote device (aka Android x86 Hyper-V)
IMPORTANT!!! Until you disconnect Docker (or whatever), your host machine (or any others) will not be able to connect, apparently only one ADB connection at a time is allowed.
I didn't need to do anything else listed above. Hope this helps others.
Just turn off your Proxifier or something else like this.
Socks5 works fine
Watever! I'm always using these steps to connect ADB Wifi with android studio
STEP-1:
1. Go to Android studio->Settings-> Plugins -> Search ADB WIFI
2. Install the pluging and restart android studio
STEP-2:
1. Find the location of SDK Manager For ex for my computer
Copy the whole location
Now open Terminal in Android studio itself( This will show in right bottom corner).
type cd YOUR_SDK_LOCATION
type cd platform-tools
Now type adb tcpip 5555
FOR NEXT STEP YOU MUST CONNECT YOUR MOBILE AND LAPTOP WITH SAME WIFI
type adb connect 192.168.6.100:5555 in terminal (Here 192.168.6.100 is your mobile IP Address)
now the message will show like this 'connected to 192.
168.6.100:5555'
STEP -3 :
1.Go to Android studio->Tools->ADB WIFI-> ADB Restart
1.Go to Android studio->Tools->ADB WIFI-> ADB USB to WIFI
Like below
That's it .
In My case my wifi network is not same thats why i am not getting connected with the device.
There is very easy and helpful plugin for this purpose Android Wifi ADB
How to Connect using plugin:
connect device using cable
click on Android wifi adb icon
disconnect your USB connection now your device is connected over wifi.
Enjoy Happy debugging.
adb reconnect offline
adb connect [ip]:[port] (for exemple adb connect 192.168.8.100:44
While all tips with killing ADB server helped me many times, now I got the message:
cannot connect to <IP>:<port>: No connection could be made because the target machine actively refused it. (10061)
It was possible to attach the device only while it was connected with USB, and after disconnecting cable it appeared as offline at the attached devices list.
I have just solved my problem by changing the USB configuration:
Developer options > Select USB Configuration: MTP (Media Transfer Protocol)
PTP (Picture Transfer Protocol) works as well.
Screenshot
I hope it will help.
I have this problem just now. Note that my case is special, the usb has been disabled for security concerns. Reboot not working. This is not ip problem since ping is working and nmap shows 5555 port is open. Also since I will not able to connect if port is wrong, so nothing to do with port.
There are 4 reasons:
Because another pc in the local network already connected, so the other guy have to adb disconnect first, then I can do adb disconnect and adb connect <ip>, since only one person can connect at the same time.
A hotspot ssid name might consists of multiple bssids in (especially you're in office) local network, so you need to ensure your pc try all the hotspot bssids which match the android connected hotspot bssid. Note that I noticed it's not always the case (Now I tried different bssids still success), but it did solved before.
Ensure the port 5555 is open correctly. Even though there are many ways, but you can download this app to open port 5555.
And I just encounter a weird case, client A connect just fine. But then client B turn on wifi and attempt to connect but failed. Then this failure causes original client A no longer able to connect. Reboot device/adb disconnect/adb kill-server doesn't help, and confirmed the ip is same(tested by turn off/on device and observe the ping). I make a joke about client B wifi still turn on may interfere the device wifi. Then I realized Client B disconnect/kill-server is not enough, client B also need turn off wifi to make client A connect. And it did.
Try,
adb disconnect <your_ip_address>:port_number or adb disconnect
eg.
adb disconnect 192.168.1.2:5555
Or
adb disconnect
The difference is that first one will disconnect only the required device, the second one will disconnect all the devices.
The benefit of using this command is that you don't have to kill and restart the server. Killing and restarting the server requires your device to be plugged in to your computer which is most irritating process.
For me the reason is GLOBAL PROXY (A country without international internet). Adb try to connect my device through proxy server.
I am trying to connect ADB using WIFI on my non rooted android devices. Currently i have 3 android devices out of which 2 are running on Android 4.0.4 and 1 on 2.3.
My device IP's are 192.168.2.122, 192.168.2.131, 192.168.2.115
I have enabled USB debugging on all of them and follow all the steps as listed here
On the command line, I did the following
adb tcpip 5555
restarting in TCP mode port:5555
adb connect 192.168.2.131
My problem is on one of my device(Android 4.0.4) ADB is getting connected with the message saying
connected to 192.168.2.122:5555
However when i try connecting other it says
unable to connect to 192.168.2.131:5555
Screenshot of the terminal page:
Image of terminal on the connected device:
Image of terminal on device which is not getting connected:
Many of the posts on Stack Over Flow says i need to root my phone for the same but the device on which ADB is getting connected is also not rooted.
May be the problem with the devices not getting connected is that their ports are not getting listened.
Any help appreciated.
I had the same problem.
I firstly connected my Android4.0.3 based device via USB and set the TCP/IP port to 5555
$ adb tcpip 5555
After that I disconnected USB connection and connected to device via WiFi IP and it worked.
$ adb kill-server
$ adb connect 192.168.2.5
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
connected to 192.168.2.5:5555
The steps are correct, with one small part different: the connect step has to be done after taking out the cable.
To reiterate follow the steps exactly as below and it will work for non-rooted devices also. I tested it with several non-rooted devices including Moto G, Nexus 1, Videocon etc.
Attach mobile via USB and type:
adb tcpip 5555
To find the mobile ip type:
adb shell ip -f inet addr show wlan0
The ip address will be shown in second line like this:
inet 192.168.1.233/24 brd 192.168.1.255 scope global wlan0
where 192.168.1.233 is the ip address of your mobile.
Remove USB cable and type:
adb connect mobile-ip:5555
After read this question I decided to create a easy to use solution to fix this problem. You can use an open source IntelliJ Plugin I've developed. Here is the code and here the plugin ready to be used.
The usage is quite simple. Here you have a gif:
Remember that old devices using an Android 2.X does not support this Android Debug Bridge feature. That's why you can't connect the device you show in the screenshots.
It works perfect with android 4.0.4. but, below that it does not works.
so, the answer to your problem is to upgrade all devices to 4.0.4.
first connect device using USB
then apply the commands....
Turn on adb over wifi on your phone
Then create file on your desktop ex. 'connect.bat'
and paste this code (you have to only change sdk, port and ip):
SET sdk=F:\Praca\sdk\platform-tools
SET port=5555
SET ip=192.168.1.101
cd /dd %sdk%
adb tcpip "%port%"
adb shell netcfg
adb connect "%ip%:%port%"
echo connected by WiFi
pause
adb -s "%ip%:%port%" usb
echo disconnected
pause
It's really fast and simply solution. Have fun!