I am trying to develop a mobile application using Android Studio but I am always getting a pop message with below message.
Intel HAXM is required to run this AVD.
HAXM device is not found.
Enable VT-x in your BIOS security settings, ensure that HAXM is installed properly. Try disabling 3rd party security software if the problem still occurs.
Things I have tried:
Installed the HAXM installer on SDK Manager
Went to Extras -> Intel -> Hardware_Accelerated_Execution_Manager and run the file named "intelhaxm-android.exe". But getting error message as "Failed to configure driver: unknown error. Failed to open driver."
I am using:
Android Studio 3.5 on Windows 7.
Could you kindly let me know that Windows 7 supports Android application development using Android Studio?
Could you kindly let me how this issue can be addressed?
For me, the problem was exactly in the HAXM version (Currently 7.5.4). I rolled back to version 7.5.1 and it worked.
Did the following (For Windows):
Found the HAXM installer (Tools -> SDK Manager, Follow the Android SDK Location\extras\intel\Hardware_Accelerated_Execution_Manager\intelhaxm-android.exe), using it deleted HAXM.
I downloaded HAXM from an older version (7.5.1) from https://github.com/intel/haxm/releases
Installed
Restarted Android Studio and it worked
To solve this problem, download and install this update https://www.microsoft.com/en-us/download/details.aspx?id=46148 from Microsoft and then restart your computer.
This solved it for me on windows7 64 bits and android studio 3.5.3
I hope it will help you as well.
For me this problem was solved by disabling Hyper-V on Windows 10.
The below are the steps to disable Hyper-V:
In "Control Panel", select "Programs and Features".
Select "Turn Windows features on or off".
Expand "Hyper-V", expand "Hyper-V Platform", and then clear the "Hyper-V Hypervisor" check box.
For me, I uninstall 7.6.5 from SDK manager and download 7.6.6 from https://github.com/intel/haxm/releases, install it as Administrator, then reboot. It works.
Related
Good day I recently had a hard drive crash. I have since installed android studio 4.1.3. On the previous version of Android Studio I had no problems running the apks and debugging on my current phone.
With this version 4.1.3 I just can not get it working. I have tried the various solutions on stack and other sites :
deleting the platform tools folder and reinstalling
adding abd.exe to system path
installing samsung drivers, installing intel drivers for the phone
Only thing I could not try was setting the project SDK according to this link https://superuser.com/questions/1419201/unable-to-locate-adb-when-using-android-studio/1561048#1561048 as my version 4.1.3 does not follow the project structure mentioned.
Im using windows 7 64bit. Can some confirm they are using windows 7 and 4.1.3 and do not have this issue? Any other suggestions on solving?
This issue was actually related to the incorrect USB driver being installed.
This has been asked before but I cannot seem to find a solution that works.
I updated Android Studio to version 3.0.1
My Mac is running Sierra version 10.13.3
When I go to run an application in Android Studio I get the following pop up message:
Many of the solutions suggest to "Uninstall the current HAXM version" that I have in the SDK Manager by unchecking it and then installing it again. When I go there, however, there's nothing to uncheck because the new version was never installed:
When I try downloading the 6.2.1 version, it does not install. I get the following error:
Does anyone know how can I get this download properly? Thank you!
Emulator is not running. I had already installed HAXM 6.2.1. Please checkout the image.
So, I just reinstalled the HAXM. Anow now another problem occurs. Please checkout image second and third.
6:54 PM Emulator: Reason: Invalid argument
6:54 PM Emulator: coreaudio: Could not lock voice for audioInputDeviceIOProc
Navigate to [Android SDK Folder] --> Extra --> Intel --> Hardware_Accelerated_Execution_Manager
and double click on HAXM installer intelhaxm-android.exe (on Mac IntelHAXM_6.2.1.dmg) and install it manually.
If you do not have latest version of HAXM then you can open sdk manager in android studio and download it.
Although, this should be installed automatically when you install Android Studio. See below.
Answering #DougThompson Question:
What if HAXM installer not installing automatically ?
In that case,
you can download HAXM installer from https://software.intel.com/en-us/articles/intel-hardware-accelerated-execution-manager-intel-haxm.
Keep the installer at [Android SDK Folder] --> Extra --> Intel
Extract and install it manually.
now you are done.
On a Mac
navigate to [ANDROID_HOME]/extras/intel/Hardware_Accelerated_Execution_Manager
open and install IntelHAXM_6.2.1.dmg
The easiest way to do that from the CLI is to type open IntelHAXM_6.2.1.dmg then double click the IntelHAXM_6.2.1.mpkg file and follow the installation prompts.
Note: I tried running the silent_install.sh file in that folder and it failed so I'm guessing that's the root problem here–that script may have a bug with how it mounts the DMG.
With Android Studio, you can find HAXM Installer under SDK tools tab.
What happens if you cannot uninstall it from the Control Panel?
What happens when you cant locate the old version to download, to put into a folder for the MSI to uninstall?
This is where your fancy 'clean up my PC' programs removed all the old installer temp files. So do you have to have a external hard drive for all your old installs? It would have been so nice if they used NPM and the uninstaller could always find the repository to remove the old version before updating to the new one.
I installed android studio 2.0 on my windows 7 ultimate, and I installed all the packages required by the android also the HAXM package is also installed. When I tried to run the emulator, it didn't run, a message popped up that said vt-x should be enabled in bios security settings, this is the pic.
I went in the bios settings but the Virtualization was already enabled over there, but when I installed a software called speccy to know about what all is included in my computer and I found in the cpu section showing that virtualization is supported but it is disabled.
Also when I ran the emulator it was written on top that /dev/kvm is not found I searched for it but it was related to linux distro I have provided some screenshots of that error this is the pic.
Go to BIOS setting of your PC after restart. Then enable virtualization in your BIOS configuration.
I had the same issue yesterday and I solved it by following the instructions here. I did the following:
Uninstalled Intel x86 Emulator Accelerator (HAXM installer) 6.0.1 from Android Studio: use Tools->Android->SDK Manager->Appearance & Behavior->System Settings->Android SDK, select the tab SDK Tools, uncheck Intel x86 Emulator Accelerator and press Apply;
Closed Android Studio;
Uninstalled Intel Hardware Accelerated Execution Manager from Control Panel->Program and Features;
Opened Android Studio and re-installed Intel x86 Emulator Accelerator from the same menu in Tools->Android->SDK Manager->Appearance & Behavior->System Settings->Android SDK.
Alternatively, one can use the Launch Standalone SDK Manager, open the Extras folder, check Intel x86 Emulator Accelerator and press Delete 1 package (or Install).
It seems that my installation of Intel Hardware Accelerated Execution Manager (HAXM) was corrupted. It is located under:
C:\Users\<name>\AppData\Local\Android\sdk\extras\intel\Hardware_Accelerated_Execution_Manager
I would recommend trying Genymotion https://www.genymotion.com/ very fast, optimized and easy to kick-start
I am running an android application on emulator. It was working fine till yesterday and today I updated android studio. I am getting following error.
How to resolve this?
emulator: WARNING: Increasing RAM size to 1GB emulator:
ERROR: x86 emulation currently requires hardware acceleration! Please ensure Intel HAXM is properly installed and usable.
CPU acceleration status: HAXM must be updated (version 1.1.1 < 6.0.1).
I had to uninstall version 1.1.1 by going to:
C:\Users\userid\AppData\Local\Android\sdk\extras\intel\Hardware_Accelerated_Execution_Manager>
then type in silent_install.bat -v to verify the current version.
then silent_install.bat -u to uninstall
then silent_install.bat to install version 6.0.1 in my case.
Go To Your Android SDK ----> Run SDK Manager as Admin.
GO down and check Extras---> Update Intel Emulator Accelator (HAXM installer).
Then Restart Android Studio and Run Your AVD.
I had the same issue, apparently, i had installed HAXM manually directly from Intel. And I guess it's conflicting with that of the Android SDK.
So I downloaded and installed the updated version from Intel at HAXM download page. This solved my HAXM [conflict] problem
At first you have to uninstall HAXM from:
Control panel > Add/remove program
After that go to here and download HAXM and install it manually.
This worked for me .
If the SDK manager thinks you have the latest version, simply go to the SDK folder and run the silent_install.bat file.
Mine was here:
C:\Users\userid\AppData\Local\Android\sdk\extras\intel\Hardware_Accelerated_Execution_Manager\silent_install.bat
It will start working immediately, no need to restart Android Studio. It's probably because the SDK manager had insufficient permissions.
When I tried to install version 6.0.3 after I downloaded the update, intelhaxm-android.exe showed a windowed message for 1/10sec (i.e. I could not read it, since I don't know how to stop time) and did nothing after that. I had to locate and run 'setup.exe' among the files extracted by intelhaxm-android.exe. This time there was a prompt saying "Intel Hardware Accelarated Manager version 1.1.1 is already installed. Do you want to install version 6.0.3?" I replied 'Yes', an installation Wizard was opened and that was it. HAXM 6.0.3 was finally installed and the emulator run again.
(Note: You might have to locate the exact 'setup.exe' file (there are four od them) that was run in the installation. You can locate it towards the end of the log file created by intelhaxm-android.exe. The message is something like that: "{temp folder}\Intel\HAXM\6.0.3\2016-09-13_14-35-22\setup.exe was launched".)