I have one project with two modules: the app and the lib.
Obviously the app module depends of the lib module.
However I need that the lib module uses resources (image drawables) from app module. Is possible?
No, because all library modules are compiled first, and they do not have any access to the application resources at this point. A library module must include all of the resources it is dependent on by definition. Only when the application is compiled do its resources get built into the relevant R classes, at which point the library is already fully compiled.
No. The problem is that resource id-s are assigned dynamically, so you can't refer to a resource from a library, since its id is unpredictable.
I have problems with accessing resources in my android library. I have created library project with some resources (com.library) and then I imported module into application project (com.app). So I have Android Studio project with library and application.
When I want to access some library resource (com.library.R.string.label) I get error during compilation
package com.library.R does not exist
When I want to run some library method from application which contains/uses R.string.label I get
java.lang.NoClassDefFoundError: com.library.R$string
I added library to application gradle file using
compile project(':Library')
and from IDE perspective looks everything fine and R.java is created with references to resources. I want same usage as I'm using for example android.R.string.cancel or similar libraries in my application project.Where I'm doing mistake? Thank you for help.
PS: In the future I want to have my library project as aar package.
As soon as you add a library to your project all resources will be "copied" to the R-file of your app. So if you want to access a string from your library you don't do something like getString(com.library.R.string.some_string) you simply call getString(R.string.some_string) instead.
In terms of the library method: Would you mind sharing some code with us? Currently I can't imagine what's going wrong.
Problem was in wrong package name in gradle configuration files (after renaming).
I have a Library project set up and a project which depends on this library project - Everything compiles fine and I've had the Dependent project running fine however;
I'm have an intermittent problem however while using an Activity from the Library project.
My Library project can be "unchecked" as a library project and the "picker" Activity can be run in isolation. Running the Library project in it's own right works fine with no problems.
When I use the Library project (and the "picker" Activity) from the dependent project it gives me either NullPointerExceptions (or historically DexOp) errors saying that the "picker" Activity can't find it's resources.
Can anybody tell me if they have experienced this before?
EDIT
Manually copying the layout.xml used by the Library project activity to the dependent project makes the project open the "picker" Activity correctly. Is this required?! Surely not? This further makes me wonder if there is a problem with merging/referencing the integer id's from R.java in the Library project.
EDIT
I'm not sure if this is of any consequence, but one of my Library projects is a wrapper around a set of custom views used in different front end projects.
These custom views each have an Activity so that they can be tested in isolation.
One of these view's has custom attributes, which while running in isolation work very well. However, it doesn't seem like the dependent project correctly pull's in the attributes and keep's them in their original namespace, causing the imported layout's to throw compilation errors:
[2012-05-16 12:07:28 - Project] D:\opt\workspace\CustomGlowList\res\layout\main.xml:14: error: No resource identifier found for attribute 'listId' in package 'com.company.library.glowlist'
[2012-05-16 12:07:28 - Project] D:\opt\workspace\CustomGlowList\res\layout\main.xml:14: error: No resource identifier found for attribute 'type' in package 'com.company.library.glowlist
EDIT
DexOp errors were solved by removing a duplicate file name which was present in the Dependent project. Not sure if the file name was the problem or the contents of the file.
EDIT
I've been unable to find a solution to this problem as of yet (although #yorkw's answer certainly helps with the xml attributes! Thanks).
I have managed to make this problem intermittent however:
I have gone through each of the library projects and ensured they all had their own namespace (ie, com.company.library.component1, com.company.library.component2 etc). After a couple of clean's (each project ordered with the correct precedence) this problem resolves itself, however does eventually come back when switching around library/not a library to test components.
Cause:
Issue 9656: Library projects don't support custom XML attributes for custom classes
Solution:
Upgrade to latest SDK & ADT version (fixed was released since r17) and use http://schemas.android.com/apk/res-auto as custom attributes' namespace URI, see Revisions for ADT 17.0.0:
Added support for custom views with custom attributes in libraries. Layouts using custom attributes must use the namespace URI http://schemas.android.com/apk/res-auto instead of the URI that includes the app package name. This URI is replaced with the app specific one at build time.
Related Topic:
Help with a custom View attributes inside a Android Library Project
not sure how you use the android library , but i've done this thing a lot of times without any problems , so please have a reading of the next things regarding using android libraries:
in order for an android project to use an android library project , you can either edit the "project.properties" and add the path to the library project there , or , much easier, right click the project (that uses the library project) , choose "android" category , and choose there "add" and choose the library project.
in order to make the android project to always open the android library project , also choose "java build path"->"projects" and choose the library project.
on the "project.properties" , try to set the target to the same target for both projects , and to the newest one that you have (latest now is 15) ,even if you can't test the app on this android version .
source files and all resources files (in the res folder) are ok to be used on the library projects.
assets folders cannot be used inside the library project . only on the android project that actually runs , the assets folder can be used . same thing goes to the proguard file .
the manifest of the library projects almost doesn't need to have almost anything . see this post for more information: https://stackoverflow.com/a/10445630/878126 . if there are activities on the library project that you wish to be able to access via the project that use it , don't forget to include them in the manifest of the android project (no need to write them in the manifest of the android library) .
remember to run lint before you export the app . it gives you plenty of warnings , but the most important warning is when you use too-new functions that cannot run on the range of APIs that you target . this is important for libraries since it's easy to get lost if there are multiple sources .
if you wish to extend activities on the android library , you need some kind of a method to go between them . the only way i know of is to extend the application and let it be the manager of how to create an intent for each of the activities . i think you can do other tricks , but they are all probably similar to this one.
if you have the same resource (any resource on the "res" folder) on both the android library and the android project, the one on the android project will replace the other one . this has advantages and disadvantages . remember that you can't have different file extensions for the same resource .
The problem was being caused by the R files from each of the Library projects not correctly being built and referenced. The resource files are built and referenced directly from the calling project.
Each of the Libraries need to have unique package as defined in the AndroidManifest.xml. This leads to each of it's resources being compiled in that unique namespace within the calling project alongside the Library jar which contains the class files.
The problem becomes intermittent when switching between a library and a runnable project because a clean and build needs to take place to regenerate these files as it isn't done automagically when unclicking the Use as library checkbox, where as the jar (and java classes) don't require as much coaxing for them to be correctly referenced as the library projects references them when acting as a Library.
This can lead to intermittent and also varying errors including missing references, DexOp and NullPointerExceptions depending on to what degree the R.java files have been mangled or partially built and what conflicts are taking places between packages.
I have same issue like, I have one library project and it has some activity.
When I was calling library project's Activity from my Main project, layout files resources were not getting loaded properly for the libray project's activity and giving "nullpointer exception" or "class could not be loaded", etc.
Solution: I have noticed that same layout file name is getting used in my Library project and Main project. I have just renamed those activity and it is solved.
May be this will help you.
I had similar issue when referencing Library project inside the Android App project. I deleted the R.java file from Library project so it generated again and App picked up the generated file. You should see the generated R.java file under your app project->gen->library_namespace_R.java.
I have one Project let us say pattern project. There are all sources and layouts for the different versions of the other projects. Without the drawables, because the other projects have different.
There are also 2 projects which use this pattern project es library. Which has there own drawable ressources and some own layout xml files.
This is working for me, I can compile it and on the device it is running.
But every time the workspace is building I get a lot of errors from the pattern project that there are no ressoruce files which are uses in the layout xml files.
res\layout\news_list.xml:9: error: Error: No resource found that matches the given name (at 'src' with value '#drawable/logosmall').
Is this normal? I'm using the wrong way to do it? How can I fix this?
I hope anyone of you can help me.
A Library project is treated as a normal Android project by the build process, so if you want it to build without errors you have to include all referenced resources (or at least similarly named placeholders) in the Library project itself even if they are to be "overridden" by your application projects.
I use the widget DateSlider provided by http://code.google.com/p/android-dateslider/
However, it also has its own resource files, I wonder how I can separate those resource files from mine.
You can set up an Android library project for that slider and include the library into your own project.
Take a look at the library project documentation