Related
Hi I have an HTC ONE rooted. I would like to modify a file in the /system/etc folder, but even if I mount through the terminal the file system in write mode, when I try to modify something with my editor, it says "only read file system".
The command I used is
"mount -o rw, remount -t rootfs /system"
Any suggestion? Android version is 4.3
Thanks!
You have to change the permission if you are not allowed.
chmod 777 file_path
It will give permission to read/write/execute to all the users,group,other
Update
Before this do execute the below commands
adb shell
su
mount -o rw,remount rootfs /
For rooted device:
Goto
ES File Explorer
From left Menu Enable Root Explorer
Click on the same row (Root Explorer) a pop-up list will occur.
Select Mount R/W > select RW for both root(/) and system (/system) path.
OK
NOW YOU CAN EVEN REPLACE(OVERWRITE) any /system/etc folder.
Tested on My 4.4.2 OS
Enjoy !!!!
I recently rooted my Droid X and everything seems to be working perfectly. I made some changes to build.prop and when I do adb push build.prop /system/ I get the following error: failed to copy 'c:\build.prop' to '/system//build.prop': Read-only file system.
How can I fix this?
Not all phones and versions of android have things mounted the same.
Limiting options when remounting would be best.
Simply remount as rw (Read/Write):
# mount -o rw,remount /system
Once you are done making changes, remount to ro (read-only):
# mount -o ro,remount /system
adb remount
works for me and seems to be the simplest solution.
While I know the question is about the real device, in case someone got here with a similar issue in the emulator, with whatever tools are the latest as of Feb, 2017, the emulator needs to be launched from the command line with:
-writable-system
For anything to be writable to the /system. Without this flag no combination of remount or mount will allow one to write to /system.
After the emulator is launched with that flag, a single adb remount after adb root is sufficient to get permissions to push to /system.
Here's an example of the command line I use to run my emulator:
./emulator -writable-system -avd Nexus_5_API_25 -no-snapshot-load -qemu
The value for the -avd flags comes from:
./emulator -list-avds
Got this off an Android forum where I asked the same question. Hope this helps somebody else.
On a terminal emulator on the phone:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
Then on the cmd prompt, do the adb push
I think the safest way is remounting the /system as read-write, using:
mount -o remount,rw /system
and when done, remount it as read-only:
mount -o remount,ro /system
adb disable-verity
adb reboot
adb root
adb remount
This works for me, and is the simplest solution.
On my Samsung galaxy mini S5570 (after got root on cellphone):
Fist, as root, I ran:
systemctl start adb
as a normal user:
adb shell
su
Grant root permissions on touch screen
mount
list all mount points that we have and we can see, in my case, that /dev/stl12 was mounted on /system as ro (ready only), so we just need do:
mount -o rw,remount /dev/stl12 /system
Try the following on the command prompt:
>adb remount
>adb push framework-res_old.apk /system/framework-res.apk
Here is what worked for me. I was running an emulated Android 7.1.1 (Nougat) device.
On a terminal, I hit the following command. One thing to be noticed is the -writable-system flag
./emulator -writable-system -avd Nexus_6_API_25 -partition-size 280
On another tab
./adb shell
su
mount -o rw,remount -t ext4 /dev/block/vda /system
All the changes that you do on the /system contents will survive a restart.
I checked with emulator and following worked.
adb reboot
adb root && adb remount && adb push ~/Desktop/hosts /system/etc/hosts
As mentioned above as well, execute second step in single shot.
Open terminal emulator on the phone:
then
adb shell
after that daemon is started
su
mount -o rw,remount /mnt/sdcard
then the read only is converted into the read-Write.
Sometimes you get the error because the destination location in phone are not exist. For example, some android phone external storage location is /storage/emulated/legacy instead of /storage/emulated/0.
mount -o rw,remount /dev/stl12 /system
works for me
This worked for me
#Mount as ReadOnly
su -c "mount -o rw,remount /system"
# Change Permission for file
su -c "chmod 777 /system/build.prop"
#Edit the file to add the property
su -c "busybox vi /system/build.prop"
# Add now
service.adb.tcp.port=5678
# Reset old permissions
su -c "chmod 644 /system/build.prop"
# Mount as readonly again once done
su -c "mount -o ro,remount /system"
I found this article from google, and thought I'd add the steps necessary on a Sony Xperia Z (4.2.2).
The Sony has a watchdog process which detects when you've changed ro to rw on / and /system (these are the only ones I was trying to modify) and possibly others.
The following was what I ran to perform the changes I was trying to achieve. I pasted these into a window, because removing the execute bit from /sbin/ric needs to be done quickly in order to stop it restarting itself. (I tried stop ric; this doesn't work - although it worked on a previous version of android on the phone).
pkill -9 ric; mount -o rw,remount -t rootfs /
chmod 640 /sbin/ric
mount -o rw,remount /system
I modified the hosts file here, so this is the place you make the changes you need to the filesystem. To leave things the way we found them, do this:
mount -o ro,remount /system
chmod 750 /sbin/ric
mount -o ro,remount -t rootfs /
At which point ric should automatically restart. (It restarted for me automatically.)
Adding a little bit more to Jan Bergström's answer: Because Android is a Linux based system, and the path in Linux contains forward slashes(../), while using push command, use "/" to define destination path in the Android device.
For Example, the command goes: adb push C:\Users\admin\Desktop\1.JPG sdcard/pictures/
Notice that here, back slashes are used to define source path of the file to be pushed from windows PC and forward slashes are used to define destination path because Android is a Linux based system. You don't have to act as a root to use this command and also, it works perfectly fine on production devices.
Thanks, Sérgio, for "mount" command without parameters idea.
I'd need to made adb push into /data/data/com.my.app/lib for some test issue, and get "Read-only filesystem" message.
ls command shows me:
root#android:/ # ls -l /data/data/com.my.app/
drwxrwx--x u0_a98 u0_a98 2016-05-06 09:16 cache
drwxrwx--x u0_a98 u0_a98 2016-05-06 09:04 files
lrwxrwxrwx system system 2016-05-06 11:43 lib -> /mnt/asec/com.my.app-1/lib
So, it's understood, that "lib" directory is separated from other application directories.
Command
mount -o rw,remount /mnt/asec
didn't resolve "r/o fs" issue, it wants device parameter before directory parameter.
"df" command didn't help also, but shows that my /mnt/asec/com.my.app-1 directory is at the separate mount point.
Then I looks by mount and voila!
root#android:/ # mount
.........
/dev/block/dm-4 /mnt/asec/com.my.app-1 ext4 ro,dirsync,relatime 0 0
Next steps are already described upwards: remount to RW, push and remount back to RO.
it sames that must extract and repack initrc.img and edit init file with the code of mount /system
Copy files to the SD-card?
Well, I assume you like to copy data to the Sd-card from the developers computer? You might have rooted the devise and made the area you address available?) I had about the same problem to upload data files for my application(Android Studio 1.3.2 in Win7), but.
First the adb command-shell has to be found in th path:
PATH=%PATH%;C:\Users\XXXXX\AppData\Local\Android\sdk\platform-tools (the folder AppData is hidden, so you have to set the folder setup not hiding concealed files and folder to find it, Path works regardless)
You have to spell the folder path right or you get a read-only error message, most likely it must start with /sdcard or it is read only area. As soon as I did no problem pushing the file to the emulator.
So for instance the the adb command can look like this:
adb push C:\testdata\t.txt /sdcard/download/t.txt
If there's a failure in copying the read-only file you can try locating the original file in the root directory and modify it with a root text editor (preferably) RB text editor, it comes with ROM Toolbox app.
Try this in a Terminal Emulator as root:
restorecon -v -R /data/media
In my case I was using the command adb push ~/Desktop/file.txt ~/sdcard/
I changed it to ~/Desktop/file.txt /sdcard/ and then it worked.
Make sure to disconnect and reconnect the phone.
As chen-xing mentioned the simplest way is:
adb reboot
But for me I had to change my settings first:
Settings → Developer options → Root access
Make sure ADB has Root access:
I just only needed this:
su -c "mount -o rw,remount /system"
I am trying to mount an sd card that I put into my tablet. The sd card is in ext2 format. I tried using BusyBox with the following command in my terminal app on the tablet:
busybox mkfs.ext2
But it seems I need to add some arguments to the command. What commands would I need to add to it? Or is there an easier way to mount the sd card?
I would like to not format the sd card as there is data on it; but whatever it takes to read it as ext2 format is ok.
you need to mount the ext2 filesystem not create the filesystem.
Depending on your tablet, the device in /dev could be different from my example. but in general you want to run a similar command :
busybox mount -t ext2 /dev/block/vold/179:2 /data/sd-ext
where /dev/block/vold/179:2 is the device that you are trying to mount.
and /data/sd-ext is the path where you want to mount your sd card to.
here's the help page for the mount command
1|shell#android:/ $ busybox mount -t
option requires an argument -- t
BusyBox v1.20.0.git (2012-03-21 01:44:00 GMT) multi-call binary.
Usage: mount [OPTIONS] [-o OPTS] DEVICE NODE
Mount a filesystem. Filesystem autodetection requires /proc.
-a Mount all filesystems in fstab
-f Dry run
-i Don't run mount helper
-r Read-only mount
-w Read-write mount (default)
-t FSTYPE[,...] Filesystem type(s)
-O OPT Mount only filesystems with option OPT (-a only)
-o OPT:
loop Ignored (loop devices are autodetected)
[a]sync Writes are [a]synchronous
[no]atime Disable/enable updates to inode access times
[no]diratime Disable/enable atime updates to directories
[no]relatime Disable/enable atime updates relative to modification time
[no]dev (Dis)allow use of special device files
[no]exec (Dis)allow use of executable files
[no]suid (Dis)allow set-user-id-root programs
[r]shared Convert [recursively] to a shared subtree
[r]slave Convert [recursively] to a slave subtree
[r]private Convert [recursively] to a private subtree
[un]bindable Make mount point [un]able to be bind mounted
[r]bind Bind a file or directory [recursively] to another location
move Relocate an existing mount point
remount Remount a mounted filesystem, changing flags
ro/rw Same as -r/-w
There are filesystem-specific -o flags.
Should be busybox mount /dev/block/something /mountpoint. mkfs creates a filesystem like format in Windows
http://www.busybox.net/downloads/BusyBox.html#mount
Or is there an easier way to mount the sd card?
It usually happens automatically, check busybox mount without arguments if it is already mounted somewhere.
I want to copy a file from sdcard to /system/etc. Below is the code in my application:
Runtime.getRuntime().exec("cat /sdcard/settings.txt > /system/etc/Settings.txt"
It doesn't works.
I run cmd on pc, it works well. I did as below:
adb shell
$cat /sdcard/settings.txt > /system/etc/Settings.txt
Why doesn't the cmd work in java code? What's my mistake? Thanks a lot.
You will need to remount the system partition in read-write mode, something like this (the block device will almost certainly be different):
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
This is not something a normal application would ever, ever do. It will also only work on a phone that has root access (you need to do this via su)
I recently rooted my Droid X and everything seems to be working perfectly. I made some changes to build.prop and when I do adb push build.prop /system/ I get the following error: failed to copy 'c:\build.prop' to '/system//build.prop': Read-only file system.
How can I fix this?
Not all phones and versions of android have things mounted the same.
Limiting options when remounting would be best.
Simply remount as rw (Read/Write):
# mount -o rw,remount /system
Once you are done making changes, remount to ro (read-only):
# mount -o ro,remount /system
adb remount
works for me and seems to be the simplest solution.
While I know the question is about the real device, in case someone got here with a similar issue in the emulator, with whatever tools are the latest as of Feb, 2017, the emulator needs to be launched from the command line with:
-writable-system
For anything to be writable to the /system. Without this flag no combination of remount or mount will allow one to write to /system.
After the emulator is launched with that flag, a single adb remount after adb root is sufficient to get permissions to push to /system.
Here's an example of the command line I use to run my emulator:
./emulator -writable-system -avd Nexus_5_API_25 -no-snapshot-load -qemu
The value for the -avd flags comes from:
./emulator -list-avds
Got this off an Android forum where I asked the same question. Hope this helps somebody else.
On a terminal emulator on the phone:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
Then on the cmd prompt, do the adb push
I think the safest way is remounting the /system as read-write, using:
mount -o remount,rw /system
and when done, remount it as read-only:
mount -o remount,ro /system
adb disable-verity
adb reboot
adb root
adb remount
This works for me, and is the simplest solution.
On my Samsung galaxy mini S5570 (after got root on cellphone):
Fist, as root, I ran:
systemctl start adb
as a normal user:
adb shell
su
Grant root permissions on touch screen
mount
list all mount points that we have and we can see, in my case, that /dev/stl12 was mounted on /system as ro (ready only), so we just need do:
mount -o rw,remount /dev/stl12 /system
Try the following on the command prompt:
>adb remount
>adb push framework-res_old.apk /system/framework-res.apk
Here is what worked for me. I was running an emulated Android 7.1.1 (Nougat) device.
On a terminal, I hit the following command. One thing to be noticed is the -writable-system flag
./emulator -writable-system -avd Nexus_6_API_25 -partition-size 280
On another tab
./adb shell
su
mount -o rw,remount -t ext4 /dev/block/vda /system
All the changes that you do on the /system contents will survive a restart.
I checked with emulator and following worked.
adb reboot
adb root && adb remount && adb push ~/Desktop/hosts /system/etc/hosts
As mentioned above as well, execute second step in single shot.
Open terminal emulator on the phone:
then
adb shell
after that daemon is started
su
mount -o rw,remount /mnt/sdcard
then the read only is converted into the read-Write.
Sometimes you get the error because the destination location in phone are not exist. For example, some android phone external storage location is /storage/emulated/legacy instead of /storage/emulated/0.
mount -o rw,remount /dev/stl12 /system
works for me
This worked for me
#Mount as ReadOnly
su -c "mount -o rw,remount /system"
# Change Permission for file
su -c "chmod 777 /system/build.prop"
#Edit the file to add the property
su -c "busybox vi /system/build.prop"
# Add now
service.adb.tcp.port=5678
# Reset old permissions
su -c "chmod 644 /system/build.prop"
# Mount as readonly again once done
su -c "mount -o ro,remount /system"
I found this article from google, and thought I'd add the steps necessary on a Sony Xperia Z (4.2.2).
The Sony has a watchdog process which detects when you've changed ro to rw on / and /system (these are the only ones I was trying to modify) and possibly others.
The following was what I ran to perform the changes I was trying to achieve. I pasted these into a window, because removing the execute bit from /sbin/ric needs to be done quickly in order to stop it restarting itself. (I tried stop ric; this doesn't work - although it worked on a previous version of android on the phone).
pkill -9 ric; mount -o rw,remount -t rootfs /
chmod 640 /sbin/ric
mount -o rw,remount /system
I modified the hosts file here, so this is the place you make the changes you need to the filesystem. To leave things the way we found them, do this:
mount -o ro,remount /system
chmod 750 /sbin/ric
mount -o ro,remount -t rootfs /
At which point ric should automatically restart. (It restarted for me automatically.)
Adding a little bit more to Jan Bergström's answer: Because Android is a Linux based system, and the path in Linux contains forward slashes(../), while using push command, use "/" to define destination path in the Android device.
For Example, the command goes: adb push C:\Users\admin\Desktop\1.JPG sdcard/pictures/
Notice that here, back slashes are used to define source path of the file to be pushed from windows PC and forward slashes are used to define destination path because Android is a Linux based system. You don't have to act as a root to use this command and also, it works perfectly fine on production devices.
Thanks, Sérgio, for "mount" command without parameters idea.
I'd need to made adb push into /data/data/com.my.app/lib for some test issue, and get "Read-only filesystem" message.
ls command shows me:
root#android:/ # ls -l /data/data/com.my.app/
drwxrwx--x u0_a98 u0_a98 2016-05-06 09:16 cache
drwxrwx--x u0_a98 u0_a98 2016-05-06 09:04 files
lrwxrwxrwx system system 2016-05-06 11:43 lib -> /mnt/asec/com.my.app-1/lib
So, it's understood, that "lib" directory is separated from other application directories.
Command
mount -o rw,remount /mnt/asec
didn't resolve "r/o fs" issue, it wants device parameter before directory parameter.
"df" command didn't help also, but shows that my /mnt/asec/com.my.app-1 directory is at the separate mount point.
Then I looks by mount and voila!
root#android:/ # mount
.........
/dev/block/dm-4 /mnt/asec/com.my.app-1 ext4 ro,dirsync,relatime 0 0
Next steps are already described upwards: remount to RW, push and remount back to RO.
it sames that must extract and repack initrc.img and edit init file with the code of mount /system
Copy files to the SD-card?
Well, I assume you like to copy data to the Sd-card from the developers computer? You might have rooted the devise and made the area you address available?) I had about the same problem to upload data files for my application(Android Studio 1.3.2 in Win7), but.
First the adb command-shell has to be found in th path:
PATH=%PATH%;C:\Users\XXXXX\AppData\Local\Android\sdk\platform-tools (the folder AppData is hidden, so you have to set the folder setup not hiding concealed files and folder to find it, Path works regardless)
You have to spell the folder path right or you get a read-only error message, most likely it must start with /sdcard or it is read only area. As soon as I did no problem pushing the file to the emulator.
So for instance the the adb command can look like this:
adb push C:\testdata\t.txt /sdcard/download/t.txt
If there's a failure in copying the read-only file you can try locating the original file in the root directory and modify it with a root text editor (preferably) RB text editor, it comes with ROM Toolbox app.
Try this in a Terminal Emulator as root:
restorecon -v -R /data/media
In my case I was using the command adb push ~/Desktop/file.txt ~/sdcard/
I changed it to ~/Desktop/file.txt /sdcard/ and then it worked.
Make sure to disconnect and reconnect the phone.
As chen-xing mentioned the simplest way is:
adb reboot
But for me I had to change my settings first:
Settings → Developer options → Root access
Make sure ADB has Root access:
I just only needed this:
su -c "mount -o rw,remount /system"