I'm trying to work with a Galaxy Tab 10.1 on Windows 7 but I'm having some troubles. At the time to debug my apps on the tab, the eclipse not recognizing the debugging device and opens the emulator.
Someone have any ideas about that?
EDIT:
I resolved the problem following this link: dkszone.net/setup-install-adb-android-debug-bridge-windows-7 Thanks to all.
Have you checked http://developer.android.com/guide/developing/device.html#setting-up
also the Samsung USB Driver should be available here http://innovator.samsungmobile.com/down/cnts/toolSDK.detail.view.do?platformId=1&cntsId=9480
it's all part of Samsungs Mobile Developer Page
I had similar trouble when pluging my Galaxy tab 101 in a port on my keyboard.
As soon as i plugged into a regular USB port on my computer, all went fine.
The solutions above did not work for me. The links appear to be out of date. The main article on how to set up for development is at http://developer.android.com/tools/device.html#setting-up (as mentioned above). This connects to an OEM USB Drivers page at http://developer.android.com/tools/extras/oem-usb.html. The directions there did not work for me: There is no "Other" item in my Device manager, and I did not find a driver on the Samsung site http://www.samsung.com/us/support/downloads# for my device (GT-80013), only manuals.
What did work was to install KIES as described at http://forum.xda-developers.com/showthread.php?t=1903483. That's all I had to do, and it magically appeared. For the record there is now a "Samsung Android Phone" item in my Device manager.
Here is a thread that helped me to solve similar problem.
http://groups.google.com/group/android-developers/browse_thread/thread/3571170253b99d0/92c8a626e08e2574
+1 Richard Lalancette 's comment, make sure the tab is plugged into a USB2.0 port.
Other things that may be issue:
1. Double check that you have enabled "Developer Options" on your tablet and the option for "USB Debugging" is checked.
2. When you connect your tab to your windows pc, you should get a message asking you to accept your computers RSA fingerprint. Click "Ok" to accept.
If all the above has been done and the tab is still not being recognised then you can update drivers for the device, download kies etc etc
Related
Suddenly my Android Studio stopped detecting all my devices, none of them is working. It happen from one execution to another. I've changed a few lines of code (1 min maybe?), hit run (instant run) and then I missed all my devices.
I'm using a Mac and as devices: Nexus 5x, Galaxy s6 and Oneplus One. What can be happening? I've checked previous questions here and tried all this:
Run configurations: no matter if I chose usb device or show the window, it does not work.
Tools > Android > Enable ADB integration: didn't help
Command line adb devices does not detect any either.
I've revoked and granted again USB authorizations. Still not working.
I've tried other apps I have, none work.
Restarted phones
Restarted android studio
Restarted computer
(Note: if I start an emulator it works, but I'd prefer to use physical device since I have to scan real barcodes)
Thanks a lot in advance.
On Lollipop 5.1
Go to About Phone
Click 7 times on Build Number. Now Developer options are enabled
Go back and Click Developer options
Enable USB debugging under Debugging.
Well, I've fixed. The problem in case any faces the same was a Stetho (http://facebook.github.io/stetho/) tab in chrome, the one you open by typing: chrome://inspect/#devices not sure about the reason because it's been open for 2 days now, but it was the cause, once I closed it, it worked.
Found this unaccepted answer here: macbook adb cannot open interface That for sure should be accepted.
EDIT: I've been able to replicate the problem. It happens when you have the devices tab open and try to run a second app that has stetho configured.
It happens if your device drivers not installed Please do this.
In Case of PC
Right click my computer select manage select device manager from left panel if your phone drivers not installed there will be yellow alert on driver right click on it select update driver software then select search automatically for update driver software.
Other
Please install the missing drivers of your phone.
I had the same problem . What I've done to solve it going to Setting >> Additional Setting >> Developer Option
Now select:
Developer option on
USB debugging on
Install via USB on
USB setting security on
Verify apps over USB
OK, what finally worked for me was to go into Settings\Developer options\Select USB Configuration and change it to PTP or MIDI....either one of those worked for me and all of the sudden my phone showed up and I was able to see and run my test app on my android phone.
This woorked for me
Go To Settings
Developer Options
Enable USB Debugging
Enable Verify Apps over USB
Select USB Configuration: Choose MIDI
I hope it also works for you
I have Samsung Galaxy Note Tablet and after update to android 4.2.2 I can not check USB Debugging button. I see it, but can't check it and adb does not list my device, but otherwise I can browse the device, when it is plugged on USB. I updated SDK and driver and everything, but adb can't list my device and on my device I can't check the USB Debugging button, because it is disabled, it's deemed.
Three days I've been googling, but couldn't even find question similar to this issue.
Could anyone suggest me a solution, please!
Thanks!
I'm sorry if my question has been unappropriated for the site, but thanks to MattK's comment I realized that the problem could be at the side of the manufacturer. So I contacted Samsung support center and they advised me to restore the fabric settings of the device. I did that (of course before archived my data with Kies) and now everything va bene
I've googled all over the place and have yet to find an answer. I have a new Galaxy S4 and just downloaded Android Studio. I'm trying to run my first Hello World app on my phone, yet Android Studio 0.2.5 does not see the device. I have enabled Dev mode on my S4 as I've read, but still no go. I even tried restarting my S4.
Anyone have any sort of idea what might be the issue?
I have a Galaxy S3 and initially I did not know what to do when I was in the same position as you are.
The Android page on making your device recognizable via USB is slightly misleading. So what is the way out ?
Well, download and install Samsung Kies and let it do its work. It will install all the necessary drivers to make your device recognizable.
Happy coding.
You're using Windows, you can try to go to Device Manager, right-click your phone, click Update Driver Software, then you should select Browse my computer for driver software, click Next and click Browse and locate the USB driver folder and point to your <android_sdk>\extras\google\usb_driver\ folder.
You can find more detailed instructions here.
I hope it can help you.
Make sure that "USB debugging" under Settings > Developer Options is checked. Then a security pop-up should appear to allow the computer to connect.
I'm having an issue with my Galaxy S2. I typically leave it in Debug mode, up until a few days ago it has worked great. I've successfully loaded APK's for testing through eclipse previously.
I tried to load a prototype of a new app im working on and when I plugged in the S2 nothing happened, Windows didn't beep like usual and when I tried to view running devices it did not show up.
When I look at the device manager under universal serial bus controllers, it doesn't show any 'unknown devices'
I've tried reinstalling drivers through kies, and third party sources (as well as removing all drivers and letting windows install them again for me.
I've tried connecting as Mass Storage Device, with debug mode on and off.
I've restarted both my computer and phone many times.
When my phone is off and plugged in Windows will beep and say that a device was connected but not recognized (which is more then what I get when the phone is on)
And sometimes when I "troubleshoot connection issues" in Kies it will reinstall the drivers and after the process is complete windows will report "Drivers were not successfully installed"
I've tried plugging it into my Windows XP laptop and it will show up as "Unrecognized device" even after I installed Kies on the laptop, and tried the driver installation it with the same results.
Posting here is my last resort as I've spent close to 5 hours troubleshooting this issue, and searching for answers. My biggest concern is that when I do plug my phone in it will beep to say that it is charging, but windows 7 doesnt even see it!
I appreciate all suggestions & help!
EDIT: Also I installed the Samsung Android USB Driver for Windows and windows reports that the drivers were not successfully installed
Thanks
Jon
Try to key in dialer:
*#7284#
It has 4 options:
UART
MODEM
PDA
USB
MODEM
PDA
In USB section, select the PDA. If it already selected to PDA then reselect it by selecting MODEM and then PDA again.
Only change the USB setting and then press back and try reconnect to kies again.
Hope it helps..
I had the same problem and JUST as i was about to give up, i realized that I had replaced my usb cord with a generic one from the store. I happened to still have the old one around still and that ended up being my issue -.-; Hope this helps someone else!
This really sucks, I know I've had this happen a few times and it's really annoying to have to deal with. I had luck with this post where they suggest:
... they suggested removing battery from hero with usb pluged in and
then putting battery back in, so i did this thinking it wouldn't work
and hey presto, mounting option became available. I was then able to
follow your first set of intructions to install the drivers through
devices and sync is now working!
If that doesn't work there are a few suggestions and helpful driver websites on there for you to follow :-D
I know I would:
Uninstall all drivers related to your device
Restart Computer without connected
Pull battery on device, plug it in, and once detected put battery back in.
If driver doesn't install correctly, or "unknown device", go to the website on that forum to get the CORRECT driver for your device and Windows OS
Go to Control Panel->Device Manager->(unknown device)->Update Driver
Locate downloaded driver, install
Make sure that when connected, the device says "USB Connected" in it's notification area
Click "Turn on USB storage", or "USB Debugging -> USB debugging"
.. this will at least show you that you have the right drivers.
IF you did all of this and you still can't get it to debug through eclipse, you either have conflicting drivers somehow, or your eclipse IDE isn't setup properly. Maybe update Eclipse, and Android SDK and try again?
Sorry can't give you exact details but this problem could be ANYTHING lol
I had the same problem while using a generic cord.
Don't use for usb transfert
I think they are made only for charging.
Solve by using a stock cord not a generic one.
Okay, so after talking to Samsung they informed me that there is a small defect with the female usb connection, and that it can sometimes be loose.
Only solution, mail it to them...
This fix works on all my computers that "don't recognize" my rooted Samsung Android. Plug the phone into the computer and restart phone. When it comes up again, the computer recognizes it.
My method is KIES AIR.
Open Kies Air
Go to settings > Bluetooth off set.
More settings > Tethering and portable hot spot > Bluetooth tethering check true and portable Wi-Fi hotspot check true.
Now KIES air open on your device and start button click. copy IP address to browser
Your s2 is connected your computer.
Open browser, and copied ip then click paste.
I have two Win XP SP3 workstations that would not connect to my Galaxy. Finally fixed it by installing this particular Intel driver and installing Windows Media Player 11.
if you are running a custom kernel on your phone, you may want to check too if you have "force fast charge" turned on or not. I thought my phone and computer would never talk to each other again but it turned out I had fast charge enabled. Turning that off solved the problem for me.
It might be an issue with USB 3.0 ports. I was tormented by this issue too and I was at the point where I was so ready to burn this device to kingdom come. Before I did that, I decided to use my never-used 2.0 port and guess what, IT WORKED! If your PC doesn't have a 2.0, good luck with that.
punch in code *#7284#, (UART set to PDA) and (USB set to PDA)
solved my problem
I've connected my Samsung Galaxy Tab device to my Mac. Yes, I've turned on debugging. When I go to run my application to test on the device the device is not listed on the Android Device Chooser menu. Running the ./adb devices shows no results.
NOTE: Posting this question for others to find. When looking for the solution earlier all I was able to locate were answers to broken links to device driver downloads for Windows.
Make sure you uncheck
Settings > Applications > Unknown Sources (Allow installation of non-Market applications)
Turn on USB Debugging inside Settings > Applications > Developers Settings
If you're trying to connect to a Mac, I had this issue with a Samsung Galaxy Tab 10.1 running Android 4.3. To enable developer options, open the Settings app, tap on "About device" under the "General" tab and then tap on the "Build number" repeatedly (it's grayed out but you can tap on it anyway). A small pop-up will appear showing the amount of additional taps you need to do to turn on these options.
Once enabled, just turn on USB Debugging and it'll show up in Eclipse just fine.
I had this problem on my Mac and after 30 minutes tried switching USB ports and it finally started working on the second port.
I fixed it by reboot the device (Samsung Galaxy Tab2 7.0)
Update your driver for samsung. It can be found here: http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
Connecting your phone after development mode is on, and USB debugging is on.
At connecting to the PC the phone asks to trust this location. Finally.
This fixed my problem while all other tips were incomplete.
It does not answer your question of how to get ADB to see the device - I could not get that working. But what I did to install an APK I needed to test was to put it in Dropbox on my computer, then install it from there on the device.
Connect your device via USB hub instead of directly connecting to one of the usb ports on MAC. It worked that way for me. Please give a try.
There's also a pop-up that comes up at times requesting the currently connected computer to have access to your device(not to be confused with the Linux not supported pop-up; it lies ; ] ). I continued to receive Target:Unknown in Eclipse until I managed to catch it and accept. This is on a Samsung Note 8", which I believe is registered as a Tab 10.1 in my Arch Linux udev rules.
It may also happen that USB debugging is not checked on your device. Please go to developper options in your device and check it is enabled.
By the way, for devices with android Jelly Beam (4.2) and later versions, you will find out that this option is hidden. To activate it, click 7 times on the compilation number, and the option will be activated.
Tried everything, nothing helped. Including
USB debugging enabled
MTP/PTP
ADB restarted
Device/PC restarted
Tried Samsung's USB driver
By tricking/modifying driver installer, installed Google OEM Usb drivers for Galaxy Tab.
All software up-to-date
The only thing that helped is installing Kies3 + setting PTP on device, instantly authorization pops out in device. Everything OK now.
Kies3 download here: http://www.samsung.com/uk/support/usefulsoftware/KIES/
Enable USB Debugging mode solve the problem!
For those who don't know how to enable it (it's very hidden on Android 4.3 onward), see this.
In my case, this solved the problem:
unchecked the Settings->Security->Unknown Sources,
clicked on the upper left corner and changed USB mode from MTP to PTP,
unplugged/plugged the device, and
clicked OK on the USB debugging prompt.
Had this problem last year, never solved it. Again, after googling high and low, I could not find a cure for the USB debugging flakiness. Now for the good news:
1) Root your device. 2) Install adbWireless widget from Play (I am in no way associated with the author).
You are now good to go. After starting adbWireless and following its directions, you can now debug through adb wirelessly to your device, in my case, the original 7" Galaxy Tab.