I installed Microsoft's Android Emulator from here which can now work without disabling Hyper-V on Windows 10. I was following the instructions in this post and everything was working smooth until yesterday. I was successfully able to debug my app in MS android emulator.
Today morning I closed the emulator and started it again. Now, When I start running the app to test it then the MS Android emulator is not showing up in Select Deployment Target window of Android Studio as below. Nexus 5X API 28 emulator visible under Available Virtual Devices is Google's Android emulator which doesn't work with Hyper-V enabled due to reasons mentioned here.
I've already launched the MS Android simulator and it is up and running:
I can see it running in Hyper-V as well as shown below:
Not sure what happened suddenly and it stopped working altogether. Can anyone suggest me the reason behind it or I'm missing something?
If it didn't detected by IDE, try to rerun the emulator and check if it is detecting again or not.
Also, you can try this too:
Tools -> Android -> Enable ADB Integration
If it is already enabled, try to disable and re enable it, seems like this works most of the times.
EDIT: You may want to check:
https://stackoverflow.com/a/38788436/4409113
Changing the value Path then running following commands:
adb kill-server
adb start-server
Might help.
I happened to resolve it by chance. Sharing my experience in case it helps someone in future.
Initially what I was doing is as below:
Start Visual Studio Emulator for Android application which contains the list all the device profiles.
Choose an appropriate device profile and install it.
Run the installed profile and launch the emulator.
Start Android studio, open the project and launch the app.
I simply reversed the above steps to resolve my issue. First close everything including Android Studio, emulators, device profile window etc.:
At first, start Android studio, open the project and hit Run app button to show Select Deployment Target window.
Now, start Visual Studio Emulator for Android application which contains the list of all the device profiles.
Choose an appropriate device profile and install it.
Run the installed profile and launch the emulator. Wait for the Android operating system to get started fully.
The Connected Devices section in Select Deployment Target window would refresh on its own to start showing Microsoft's Android Emulator.
The adb.exe can be seen as an infected file by antivirius software. So need to exclude once reinstated.
I have been working on a particular Android application for sometime and have been able to run these apps via Android Studio quite fine before but since applying a recent update I have not been able to run the app via Android studio because of the following error:
android.os.TransactionTooLargeException
Error: Could not access the Package Manager. Is the system running?
I have tried to troubleshoot this issue by connecting via a different TCP/IP instead of through USB (thinking it was a cable fault of sorts), reinstalling ADB, removing the ADB driver and restarting Android Studio, and all of the above yielded the same error when trying to run the app from Android Studio.
The update that was applied was the addition of the YouTube Android Player to a fragment. The fragment that contains YouTube Player was added to FragmentManager of the parent Activity during the onCreate method of this fragment. Could this be the problem? Or am I looking in the wrong place
Any insight would be appreciated.
You may have gotten this error while attempting to run an Android application on an emulator or device using Android Studio. The most common cause of this error is simple as stated in this link: You have to manually unlock your Android Virtual Device by swiping the "lock" icon on the screen. Security measures prevent the emulator from letting you connect the debugger before doing this. Make sure also that you are running Android Studio version above 0.3.2 or the latest version. There was some issue reported in AS 0.3.2. You can update it from Help >Check for update.
Found this thread which states that it might be an issue with your emulator not with Android Studio. Maybe you are trying to install application before even the emulator started properly. Wait till the home screen appears in the emulator before trying to install any application.
Also try to install any apk in Emulator from command line
Steps to install
Go to $Android_SDK_DIR\platform-tools, right click there keeping shift key pressed and Chose "Open Command Window here".
Run command adb devices to make sure yout emulator is running properly. It will show all your running emulators.
Now if emulators are showing properly, type the command adb install YOUR_FULL_APK_PATH , YOUR_FULL_APK_PATH is of any .apk
file path in your system.
You need to wait for the emulator to full start which may take a few minutes. Once it is fully started (UI on the emulator will change), it should work. You will need to restart the app after the emulator is running and choose the running emulator when prompted. You can check on this bug report the full details.
Hope this helps!
I'm not sure, but check if this works.
menu>> tools>>Android>>Enable ADB integration check it
I create blank xamarin android project without add any code when i debug this project debugging without problem but when i run app with visual studio emulator for android emulator is running but not starting my app and deploy failed and don't show me error
why ?
please help me
I had the same issue. VS 2015 can launch the VS emulator but can't deploy the app.
I was able to solve the issue like this:
Launch the emulator (F5 in VS, then cancel the deployment using the Build/Cancel menu)
Click on the chevron icon (») in the toolbar to the right of the emulator
Select the Network tab
Locate the preferred network ip address
Back in VS, click on the Open Adb Command Prompt toolbar button
Type adb connect [the emulator ip address]
Press F5 again in VS
Looks like a VS bug to me.
I had the same issue. It turned out the root cause was that the VS Emulator couldn't find adb.exe.
When that happens it won't connect to the emulator unless you do the manual connection following the steps CSharpRocks gives. The emulator also won't be listed under "adb devices".
The fix for me was to reinstall the Android SDK, using the Windows EXE based installer (not the zip installer). The EXE installer sets the HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Android SDK Tools key, Path value, in the registry, pointing to the Android SDK root directory.
The VS Emulator uses that registry setting (or the Android Studio install registry setting) to find the SDK, assuming you didn't install the Android SDK with Visual Studio itself. With that, it should be able to find adb.exe and work.
Have a look here:
Xamarin Forms Android App Crashes Running Debug with VS Android Emulator
Start the Hyper-V manager
Select the emulator you are trying to use
Right-click, hit settings
Click processor
Click Compatibility
Set checkbox “Migrate to a physical computer with a different processor version”
I'm having a very similar issue. I have found two different kind-of-work-arounds, but have not yet figured out a full solution.
Start the emulator before trying to deploy to it
Launch the Visual Studio Emulator for Android application from the start menu.
Launch one of the available emulators via the green arrow
Attempt to again launch your application from visual studio, selecting the VS Emulator N-inch... emulator from the drop down menu
For me for some reason the app still doesn't "launch" on the emulator, although it is installed. So I have to open the application menu and select my app. Additionally it will usually crash the first several times I try to open it, but eventually displays my single default label, Welcome to Xamarin Forms!.
Run the application in Ad-Hoc mode
Before running the application, change the solution configuration (from the top toolbar next to the green "run" button) to Ad-Hoc.
The problem with both of these methods though is that I'm still not able to actually debug an application. I can run it, but my breakpoints are ignored and I think that will make finding bugs difficult once I actually start to write a real application.
I hope to update this answer once I figure out an actual solution.
I had the same problem yesterday. The problem appeared (probably) because I tried to start development after a long break. I updated VS and everything, but faced many issues.
Eventually you need to start fresh
Make sure SDK for emulator points to the right place (HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Android SDK Tools)
Run Visual Studio with Administrator privileges
Go to Hyper-V Manager and delete ALL Virtual Switches - let the system recreate them when needed. It will do it properly
Delete all existing emulators and recreate them in Visual Studio. I even found a comment to name them without spaces - not sure if it is needed, but wouldn't hurt.
Doing all this helped me. But I was on the verge of reinstalling Windows 10 clean. I think lots of things and configuration changed and are no longer compatible.
Try it enabling Hyper-V and using a Visual Studio Emulator from android; that worked for me after a lot of attempts and research
I had the same issue but in my case it was not the registry. After doing a release build, I deployed the app to the emulator device in release mode which pushes the app to the device and then effectively "disconnects". This leaves a version of the app on the device which seems to block further attempts at debugging or deploying.
I solved it by starting the emulator, going to "settings -> apps" and manually uninstalling my app. Then the next debug build & deploy worked again.
You could probably also manually start the emulator and say "wipe device" option so it starts fresh.
In VS2017, on a Windows10 machine, all I had to do to get the app to show up was turn off Mobile Data.
(swipe down or use settings, then click Mobile Data and confirm to turn it off).
After I turned it back on, I could access the app. Before doing this, it always seemed that the emulator ran, but wouldn't run the app.
... no idea why this worked, but I'm posting it here in case it helps someone.
During my troubleshooting process, I also looked at these articles:
VS Android Emulator wont run application
Troubleshooting the Visual Studio Emulator for Android
Update Your Path For The New Android Emulator Location
Install apache in VS 2015 here.
Visual studio requires apache to develop android apps.
You also may want to look at some other suggestions:
notshowing, troubleshooting
I had such issues before with the android SDK emulator, now I'm using Genymotion emulator instead of it, it is more light and faster and will be detected automatically by you VS once launched.
you can download the free version from here : https://www.genymotion.com/
and also you can download any device emulator.
I'm using android studio about 2 weeks and everything is going right until I try to create a new app and the android studio ask me for updates to API level 22 and I did it. After this update my emulator doesn't load my app anymore, the emulator opens but the app doesn't show up and even appears at emulator.
Log:
Device Nexus_5_API_21_x86 [emulator-5554] is online, waiting for processes to start up..
I try to uninstall and install again the android studio but even reinstalling with API level 21 keep not working.
Even the default Hello World application doesn't load and not show up at my emulator.
I had the same issue, and was able to work around it by manually starting the emulator first, then running the app and choosing the running emulator
I had this same issue with my first app on android studio 2.1.2. I just tried to run it and see on emulator screen but app didn't show up there.
Remember to check the messages panel it saying something wrong with my java version. I had installed JDK 7. I installed JDK 8 and that fixed the problem.
my emulator was working fine
but now when I run my program the emulator opens but my application does not appear .. I am working with Android studio
Yup I'm facing that problem. What i do is, whenever emulator fully loads, i re run that module & it will ask me to choose either the emulator which is ONLINE or start another avd.
So, just choose the ONLINE emulator and run it.