Related
An extended Application class can declare global variables. Are there other reasons?
Introduction:
If we consider an apk file in our mobile, it is comprised of
multiple useful blocks such as, Activitys, Services and
others.
These components do not communicate with each other regularly and
not forget they have their own life cycle. which indicate that
they may be active at one time and inactive the other moment.
Requirements:
Sometimes we may require a scenario where we need to access a
variable and its states across the entire Application regardless of
the Activity the user is using,
An example is that a user might need to access a variable that holds his
personnel information (e.g. name) that has to be accessed across the
Application,
We can use SQLite but creating a Cursor and closing it again and
again is not good on performance,
We could use Intents to pass the data but it's clumsy and activity
itself may not exist at a certain scenario depending on the memory-availability.
Uses of Application Class:
Access to variables across the Application,
You can use the Application to start certain things like analytics
etc. since the application class is started before Activitys or
Servicess are being run,
There is an overridden method called onConfigurationChanged() that is
triggered when the application configuration is changed (horizontal
to vertical & vice-versa),
There is also an event called onLowMemory() that is triggered when
the Android device is low on memory.
Application class is the object that has the full lifecycle of your application. It is your highest layer as an application. example possible usages:
You can add what you need when the application is started by overriding onCreate in the Application class.
store global variables that jump from Activity to Activity. Like Asynctask.
etc
Sometimes you want to store data, like global variables which need to be accessed from multiple Activities - sometimes everywhere within the application. In this case, the Application object will help you.
For example, if you want to get the basic authentication data for each http request, you can implement the methods for authentication data in the application object.
After this,you can get the username and password in any of the activities like this:
MyApplication mApplication = (MyApplication)getApplicationContext();
String username = mApplication.getUsername();
String password = mApplication.getPassword();
And finally, do remember to use the Application object as a singleton object:
public class MyApplication extends Application {
private static MyApplication singleton;
public MyApplication getInstance(){
return singleton;
}
#Override
public void onCreate() {
super.onCreate();
singleton = this;
}
}
For more information, please Click Application Class
Offhand, I can't think of a real scenario in which extending Application is either preferable to another approach or necessary to accomplish something. If you have an expensive, frequently used object you can initialize it in an IntentService when you detect that the object isn't currently present. Application itself runs on the UI thread, while IntentService runs on its own thread.
I prefer to pass data from Activity to Activity with explicit Intents, or use SharedPreferences. There are also ways to pass data from a Fragment to its parent Activity using interfaces.
The Application class is a singleton that you can access from any activity or anywhere else you have a Context object.
You also get a little bit of lifecycle.
You could use the Application's onCreate method to instantiate expensive, but frequently used objects like an analytics helper. Then you can access and use those objects everywhere.
Best use of application class.
Example: Suppose you need to restart your alarm manager on boot completed.
public class BaseJuiceApplication extends Application implements BootListener {
public static BaseJuiceApplication instance = null;
public static Context getInstance() {
if (null == instance) {
instance = new BaseJuiceApplication();
}
return instance;
}
#Override
public void onCreate() {
super.onCreate();
}
#Override
public void onBootCompleted(Context context, Intent intent) {
new PushService().scheduleService(getInstance());
//startToNotify(context);
}
Not an answer but an observation: keep in mind that the data in the extended application object should not be tied to an instance of an activity, as it is possible that you have two instances of the same activity running at the same time (one in the foreground and one not being visible).
For example, you start your activity normally through the launcher, then "minimize" it. You then start another app (ie Tasker) which starts another instance of your activitiy, for example in order to create a shortcut, because your app supports android.intent.action.CREATE_SHORTCUT. If the shortcut is then created and this shortcut-creating invocation of the activity modified the data the application object, then the activity running in the background will start to use this modified application object once it is brought back to the foreground.
I see that this question is missing an answer. I extend Application because I use Bill Pugh Singleton implementation (see reference) and some of my singletons need context. The Application class looks like this:
public class MyApplication extends Application {
private static final String TAG = MyApplication.class.getSimpleName();
private static MyApplication sInstance;
#Contract(pure = true)
#Nullable
public static Context getAppContext() {
return sInstance;
}
#Override
public void onCreate() {
super.onCreate();
Log.d(TAG, "onCreate() called");
sInstance = this;
}
}
And the singletons look like this:
public class DataManager {
private static final String TAG = DataManager.class.getSimpleName();
#Contract(pure = true)
public static DataManager getInstance() {
return InstanceHolder.INSTANCE;
}
private DataManager() {
doStuffRequiringContext(MyApplication.getAppContext());
}
private static final class InstanceHolder {
#SuppressLint("StaticFieldLeak")
private static final DataManager INSTANCE = new DataManager();
}
}
This way I don't need to have a context every time I'm using a singleton and get lazy synchronized initialization with minimal amount of code.
Tip: updating Android Studio singleton template saves a lot of time.
I think you can use the Application class for many things, but they are all tied to your need to do some stuff BEFORE any of your Activities or Services are started.
For instance, in my application I use custom fonts. Instead of calling
Typeface.createFromAsset()
from every Activity to get references for my fonts from the Assets folder (this is bad because it will result in memory leak as you are keeping a reference to assets every time you call that method), I do this from the onCreate() method in my Application class:
private App appInstance;
Typeface quickSandRegular;
...
public void onCreate() {
super.onCreate();
appInstance = this;
quicksandRegular = Typeface.createFromAsset(getApplicationContext().getAssets(),
"fonts/Quicksand-Regular.otf");
...
}
Now, I also have a method defined like this:
public static App getAppInstance() {
return appInstance;
}
and this:
public Typeface getQuickSandRegular() {
return quicksandRegular;
}
So, from anywhere in my application, all I have to do is:
App.getAppInstance().getQuickSandRegular()
Another use for the Application class for me is to check if the device is connected to the Internet BEFORE activities and services that require a connection actually start and take necessary action.
Source: https://github.com/codepath/android_guides/wiki/Understanding-the-Android-Application-Class
In many apps, there's no need to work with an application class directly. However, there are a few acceptable uses of a custom application class:
Specialized tasks that need to run before the creation of your first activity
Global initialization that needs to be shared across all components (crash reporting, persistence)
Static methods for easy access to static immutable data such as a shared network client object
You should never store mutable instance data inside the Application object because if you assume that your data will stay there, your application will inevitably crash at some point with a NullPointerException. The application object is not guaranteed to stay in memory forever, it will get killed. Contrary to popular belief, the app won’t be restarted from scratch. Android will create a new Application object and start the activity where the user was before to give the illusion that the application was never killed in the first place.
To add onto the other answers that state that you might wish store variables in the application scope, for any long-running threads or other objects that need binding to your application where you are NOT using an activity (application is not an activity).. such as not being able to request a binded service.. then binding to the application instance is preferred. The only obvious warning with this approach is that the objects live for as long as the application is alive, so more implicit control over memory is required else you'll encounter memory-related problems like leaks.
Something else you may find useful is that in the order of operations, the application starts first before any activities. In this timeframe, you can prepare any necessary housekeeping that would occur before your first activity if you so desired.
2018-10-19 11:31:55.246 8643-8643/: application created
2018-10-19 11:31:55.630 8643-8643/: activity created
You can access variables to any class without creating objects, if its extended by Application. They can be called globally and their state is maintained till application is not killed.
The use of extending application just make your application sure for any kind of operation that you want throughout your application running period. Now it may be any kind of variables and suppose if you want to fetch some data from server then you can put your asynctask in application so it will fetch each time and continuously, so that you will get a updated data automatically.. Use this link for more knowledge....
http://www.intridea.com/blog/2011/5/24/how-to-use-application-object-of-android
What exactly is the purpose of Application class.
what are the benefits of extending it to a custom subclass
Why use it ?
Can global variables be stored in any other class achieve same goal as Application ?
Nice question !
Your application is a context that is always running while your activities and services are running.
It is also the first context to be created and the last to be destroyed.
Thus, it surrounds the life cycle of your app.
You can use the application class as a way to share data or components (for dependency injection for instance). For instance if you want to share a singleton between activities, you can create the instance in the application class and provide a getter, then all other contexts can get the singleton via
((cast to your class)getApplicationContext()).getFoo();
There may be some use cases where you need to do stuff before even your first activity is launched, then do it in the onCreate method of the application class.
On the other hand, you should never relie on the onDestroy method of the Application class, as it is not always called. There is no contract for that on Android.
But this is rare and, usually, you don't need to override the application class though. Dependency injection can be achieved in other ways by RoboGuice or Dagger for instance.
Two things makes this Class very useful:
Application class is instantiated before any other Activity.
It holds the Application Context
Context brings a host of resources for us: we can figure out some device properties, load some resources, initiate a SQLite database etc, etc.
All of this happens before any Activity loads, and all of this is globally available to the Activities.
Simple example of what I mean:
public class App extends Application{
private static Resources sResources;
//--I want to load strings resources from anywhere--
public static String loadStringResource(int resID) {
return sResources.getString(resID);
}
#Override
public void onCreate() {
super.onCreate();
sResources = getResources();
//---I want to load all preferences when my app starts---
PreferenceManager.setDefaultValues(this,R.xml.prefs,false);
}
}
Extending the Application class allows you to integrate into the application's lifecycle.
This is also useful to store global application-level information (though it's usually good to keep your activities 'independent')
The Application class is aware of the Application Context and is loaded when your app is loaded so it holds the proper callbacks for the application lifecycle before your activity starts. You most likely would not want to extend this class.
From the API docs:
There is normally no need to subclass Application. In most situation, static singletons can provide the same functionality in a more modular way. If your singleton needs a global context (for example to register broadcast receivers), the function to retrieve it can be given a Context which internally uses Context.getApplicationContext() when first constructing the singleton.
http://developer.android.com/reference/android/app/Application.html
I am trying to make a live wallpaper on Android. I have one class
public class MyWallpaperService extends WallpaperService {
}
And annother class:
public class SettingsActivity extends Activity {
}
I need to make the SettingsActivity communicate with MyWallpaperService in order to set values on the live wallpaper. I have used aidl before and have tried to apply it to this situation. However it seems like WallpaperService has the following method:
/**
* Implement to return the implementation of the internal accessibility
* service interface. Subclasses should not override.
*/
#Override
public final IBinder onBind(Intent intent) {
return new IWallpaperServiceWrapper(this);
}
Therefore I cannot return my own custom aidl defined binder in the onBind method of my service due to the final declaration on the superclass, WallpaperService's, onBind method. To me this seems like an oversight by the Android platform development team. Does this effectively removes all possible inter process communication abilities from any live wallpaper?
What are my options here? I know I can put the Activity and the Service in the same process and have the Activity set global variables on the Service, but that seems like it could get messy fast and I want to do this right. Is adding a Broadcast Receiver in the Service the right move here?
You could also use BroadCasts to achieve communication between a wallpaper service and some controller activity, source below.
http://developer.samsung.com/android/technical-docs/Effective-communication-between-Service-and-Activity
I'm working on a fairly complex Android application that requires a somewhat large amount of data about the application (I'd say a total of about 500KB -- is this large for a mobile device?). From what I can tell, any orientation change in the application (in the activity, to be more precise) causes a complete destruction and recreation of the activity. Based on my findings, the Application class does not have the same life-cycle (i.e. it is, for all intents and purposes, always instantiated). Does it make sense to store the state information inside of the application class and then reference it from the Activity, or is that generally not the "acceptable" method due to memory constraints on mobile devices? I really appreciate any advice on this topic. Thanks!
I don't think 500kb will be that big of a deal.
What you described is exactly how I tackled my problem of losing data in an activity. I created a global singleton in the Application class and was able to access it from the activities I used.
You can pass data around in a Global Singleton if it is going to be used a lot.
public class YourApplication extends Application
{
public SomeDataClass data = new SomeDataClass();
}
Then call it in any activity by:
YourApplication appState = ((YourApplication)this.getApplication());
appState.data.UseAGetterOrSetterHere(); // Do whatever you need to with the data here.
I discuss it here in my blog post, under the section "Global Singleton."
Those who count on Application instance are wrong. At first, it may seem as though the Application exists for as long as the whole app process exists but this is an incorrect assumption.
The OS may kill processes as necessary. All processes are divided into 5 levels of "killability" specified in the doc.
So, for instance, if your app goes in the background due to the user answering to an incoming call, then depending on the state of the RAM, the OS may (or may not) kill your process (destroying the Application instance in the process).
I think a better approach would be to persist your data to internal storage file and then read it when your activity resumes.
UPDATE:
I got many negative feedbacks, so it is time to add a clarification. :) Well, initially I realy used a wrong assumption that the state is really important for the app. However if your app is OK that sometimes the state is lost (it could be some images that will be just reread/redownloaded), then it is fully OK to keep it as a member of Application.
If you want to access the "Global Singleton" outside of an activity and you don't want to pass the Context through all the involved objects to obtain the singleton, you can just define a static attribute in your application class, which holds the reference to itself. Just initialize the attribute in the onCreate() method.
For example:
public class ApplicationController extends Application {
private static ApplicationController _appCtrl;
public static ApplicationController getAppCtrl()
{
return _appCtrl;
}
}
Because subclasses of Application also can obtain the Resources, you could access them simply when you define a static method, which returns them, like:
public static Resources getAppResources()
{
return _appCtrl.getResources();
}
But be very careful when passing around Context references to avoid memory leaks.
Dave, what kind of data is it? If it's general data that pertains to the application as a whole (example: user data), then extend the Application class and store it there. If the data pertains to the Activity, you should use the onSaveInstanceState and onRestoreInstanceState handlers to persist the data on screen rotation.
You can actually override the orientation functionality to make sure that your activity isn't destroyed and recreated. Look here.
You can create Application class and save your all data on that calss for use that anywhere in your application.
I know this is the very old question but using the ViewModel from the jetpack components is the best way to preserve the data between Activity rotation.
The ViewModel class is designed to store and manage UI-related data in a lifecycle conscious way. The ViewModel class allows data to survive configuration changes such as screen rotations.
I am creating an application which requires login. I created the main and the login activity.
In the main activity onCreate method I added the following condition:
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.main);
...
loadSettings();
if(strSessionString == null)
{
login();
}
...
}
The onActivityResult method which is executed when the login form terminates looks like this:
#Override
public void onActivityResult(int requestCode,
int resultCode,
Intent data)
{
super.onActivityResult(requestCode, resultCode, data);
switch(requestCode)
{
case(SHOW_SUBACTICITY_LOGIN):
{
if(resultCode == Activity.RESULT_OK)
{
strSessionString = data.getStringExtra(Login.SESSIONSTRING);
connectionAvailable = true;
strUsername = data.getStringExtra(Login.USERNAME);
}
}
}
The problem is the login form sometimes appears twice (the login() method is called twice) and also when the phone keyboard slides the login form appears again and I guess the problem is the variable strSessionString.
Does anyone know how to set the variable global in order to avoid login form appearing after the user already successfully authenticates?
I wrote this answer back in '09 when Android was relatively new, and there were many not well established areas in Android development. I have added a long addendum at the bottom of this post, addressing some criticism, and detailing a philosophical disagreement I have with the use of Singletons rather than subclassing Application. Read it at your own risk.
ORIGINAL ANSWER:
The more general problem you are encountering is how to save state across several Activities and all parts of your application. A static variable (for instance, a singleton) is a common Java way of achieving this. I have found however, that a more elegant way in Android is to associate your state with the Application context.
As you know, each Activity is also a Context, which is information about its execution environment in the broadest sense. Your application also has a context, and Android guarantees that it will exist as a single instance across your application.
The way to do this is to create your own subclass of android.app.Application, and then specify that class in the application tag in your manifest. Now Android will automatically create an instance of that class and make it available for your entire application. You can access it from any context using the Context.getApplicationContext() method (Activity also provides a method getApplication() which has the exact same effect). Following is an extremely simplified example, with caveats to follow:
class MyApp extends Application {
private String myState;
public String getState(){
return myState;
}
public void setState(String s){
myState = s;
}
}
class Blah extends Activity {
#Override
public void onCreate(Bundle b){
...
MyApp appState = ((MyApp)getApplicationContext());
String state = appState.getState();
...
}
}
This has essentially the same effect as using a static variable or singleton, but integrates quite well into the existing Android framework. Note that this will not work across processes (should your app be one of the rare ones that has multiple processes).
Something to note from the example above; suppose we had instead done something like:
class MyApp extends Application {
private String myState = /* complicated and slow initialization */;
public String getState(){
return myState;
}
}
Now this slow initialization (such as hitting disk, hitting network, anything blocking, etc) will be performed every time Application is instantiated! You may think, well, this is only once for the process and I'll have to pay the cost anyways, right? For instance, as Dianne Hackborn mentions below, it is entirely possible for your process to be instantiated -just- to handle a background broadcast event. If your broadcast processing has no need for this state you have potentially just done a whole series of complicated and slow operations for nothing. Lazy instantiation is the name of the game here. The following is a slightly more complicated way of using Application which makes more sense for anything but the simplest of uses:
class MyApp extends Application {
private MyStateManager myStateManager = new MyStateManager();
public MyStateManager getStateManager(){
return myStateManager ;
}
}
class MyStateManager {
MyStateManager() {
/* this should be fast */
}
String getState() {
/* if necessary, perform blocking calls here */
/* make sure to deal with any multithreading/synchronicity issues */
...
return state;
}
}
class Blah extends Activity {
#Override
public void onCreate(Bundle b){
...
MyStateManager stateManager = ((MyApp)getApplicationContext()).getStateManager();
String state = stateManager.getState();
...
}
}
While I prefer Application subclassing to using singletons here as the more elegant solution, I would rather developers use singletons if really necessary over not thinking at all through the performance and multithreading implications of associating state with the Application subclass.
NOTE 1: Also as anticafe commented, in order to correctly tie your Application override to your application a tag is necessary in the manifest file. Again, see the Android docs for more info. An example:
<application
android:name="my.application.MyApp"
android:icon="..."
android:label="...">
</application>
NOTE 2: user608578 asks below how this works with managing native object lifecycles. I am not up to speed on using native code with Android in the slightest, and I am not qualified to answer how that would interact with my solution. If someone does have an answer to this, I am willing to credit them and put the information in this post for maximum visibility.
ADDENDUM:
As some people have noted, this is not a solution for persistent state, something I perhaps should have emphasized more in the original answer. I.e. this is not meant to be a solution for saving user or other information that is meant to be persisted across application lifetimes. Thus, I consider most criticism below related to Applications being killed at any time, etc..., moot, as anything that ever needed to be persisted to disk should not be stored through an Application subclass. It is meant to be a solution for storing temporary, easily re-creatable application state (whether a user is logged in for example) and components which are single instance (application network manager for example) (NOT singleton!) in nature.
Dayerman has been kind enough to point out an interesting conversation with Reto Meier and Dianne Hackborn in which use of Application subclasses is discouraged in favor of Singleton patterns. Somatik also pointed out something of this nature earlier, although I didn't see it at the time. Because of Reto and Dianne's roles in maintaining the Android platform, I cannot in good faith recommend ignoring their advice. What they say, goes. I do wish to disagree with the opinions, expressed with regards to preferring Singleton over Application subclasses. In my disagreement I will be making use of concepts best explained in this StackExchange explanation of the Singleton design pattern, so that I do not have to define terms in this answer. I highly encourage skimming the link before continuing. Point by point:
Dianne states, "There is no reason to subclass from Application. It is no different than making a singleton..." This first claim is incorrect. There are two main reasons for this. 1) The Application class provides a better lifetime guarantee for an application developer; it is guaranteed to have the lifetime of the application. A singleton is not EXPLICITLY tied to the lifetime of the application (although it is effectively). This may be a non-issue for your average application developer, but I would argue this is exactly the type of contract the Android API should be offering, and it provides much more flexibility to the Android system as well, by minimizing the lifetime of associated data. 2) The Application class provides the application developer with a single instance holder for state, which is very different from a Singleton holder of state. For a list of the differences, see the Singleton explanation link above.
Dianne continues, "...just likely to be something you regret in the future as you find your Application object becoming this big tangled mess of what should be independent application logic." This is certainly not incorrect, but this is not a reason for choosing Singleton over Application subclass. None of Diane's arguments provide a reason that using a Singleton is better than an Application subclass, all she attempts to establish is that using a Singleton is no worse than an Application subclass, which I believe is false.
She continues, "And this leads more naturally to how you should be managing these things -- initializing them on demand." This ignores the fact that there is no reason you cannot initialize on demand using an Application subclass as well. Again there is no difference.
Dianne ends with "The framework itself has tons and tons of singletons for all the little shared data it maintains for the app, such as caches of loaded resources, pools of objects, etc. It works great." I am not arguing that using Singletons cannot work fine or are not a legitimate alternative. I am arguing that Singletons do not provide as strong a contract with the Android system as using an Application subclass, and further that using Singletons generally points to inflexible design, which is not easily modified, and leads to many problems down the road. IMHO, the strong contract the Android API offers to developer applications is one of the most appealing and pleasing aspects of programming with Android, and helped lead to early developer adoption which drove the Android platform to the success it has today. Suggesting using Singletons is implicitly moving away from a strong API contract, and in my opinion, weakens the Android framework.
Dianne has commented below as well, mentioning an additional downside to using Application subclasses, they may encourage or make it easier to write less performance code. This is very true, and I have edited this answer to emphasize the importance of considering perf here, and taking the correct approach if you're using Application subclassing. As Dianne states, it is important to remember that your Application class will be instantiated every time your process is loaded (could be multiple times at once if your application runs in multiple processes!) even if the process is only being loaded for a background broadcast event. It is therefore important to use the Application class more as a repository for pointers to shared components of your application rather than as a place to do any processing!
I leave you with the following list of downsides to Singletons, as stolen from the earlier StackExchange link:
Inability to use abstract or interface classes;
Inability to subclass;
High coupling across the application (difficult to modify);
Difficult to test (can't fake/mock in unit tests);
Difficult to parallelize in the case of mutable state (requires extensive locking);
and add my own:
Unclear and unmanageable lifetime contract unsuited for Android (or most other) development;
Create this subclass
public class MyApp extends Application {
String foo;
}
In the AndroidManifest.xml add android:name
Example
<application android:name=".MyApp"
android:icon="#drawable/icon"
android:label="#string/app_name">
The suggested by Soonil way of keeping a state for the application is good, however it has one weak point - there are cases when OS kills the entire application process. Here is the documentation on this - Processes and lifecycles.
Consider a case - your app goes into the background because somebody is calling you (Phone app is in the foreground now). In this case && under some other conditions (check the above link for what they could be) the OS may kill your application process, including the Application subclass instance. As a result the state is lost. When you later return to the application, then the OS will restore its activity stack and Application subclass instance, however the myState field will be null.
AFAIK, the only way to guarantee state safety is to use any sort of persisting the state, e.g. using a private for the application file or SharedPrefernces (it eventually uses a private for the application file in the internal filesystem).
Just a note ..
add:
android:name=".Globals"
or whatever you named your subclass to the existing <application> tag. I kept trying to add another <application> tag to the manifest and would get an exception.
What about ensuring the collection of native memory with such global structures?
Activities have an onPause/onDestroy() method that's called upon destruction, but the Application class has no equivalents. What mechanism are recommended to ensure that global structures (especially those containing references to native memory) are garbage collected appropriately when the application is either killed or the task stack is put in the background?
I couldn't find how to specify the application tag either, but after a lot of Googling, it became obvious from the manifest file docs: use android:name, in addition to the default icon and label in the application stanza.
android:name
The fully qualified name of an Application subclass implemented for the application. When the application process is started, this class is instantiated before any of the application's components.
The subclass is optional; most applications won't need one. In the absence of a subclass, Android uses an instance of the base Application class.
Just you need to define an application name like below which will work:
<application
android:name="ApplicationName" android:icon="#drawable/icon">
</application>
Like there was discussed above OS could kill the APPLICATION without any notification (there is no onDestroy event) so there is no way to save these global variables.
SharedPreferences could be a solution EXCEPT you have COMPLEX STRUCTURED variables (in my case I had integer array to store the IDs that the user has already handled). The problem with the SharedPreferences is that it is hard to store and retrieve these structures each time the values needed.
In my case I had a background SERVICE so I could move this variables to there and because the service has onDestroy event, I could save those values easily.
If some variables are stored in sqlite and you must use them in most activities in your app.
then Application maybe the best way to achieve it.
Query the variables from database when application started and store them in a field.
Then you can use these variables in your activities.
So find the right way, and there is no best way.
You can have a static field to store this kind of state. Or put it to the resource Bundle and restore from there on onCreate(Bundle savedInstanceState). Just make sure you entirely understand Android app managed lifecycle (e.g. why login() gets called on keyboard orientation change).
DO N'T Use another <application> tag in manifest file.Just do one change in existing <application> tag , add this line android:name=".ApplicationName" where, ApplicationName will be name of your subclass(use to store global) that, you is about to create.
so, finally your ONE AND ONLY <application> tag in manifest file should look like this :-
<application
android:allowBackup="true"
android:icon="#mipmap/ic_launcher"
android:label="#string/app_name"
android:theme="#style/Theme.AppCompat.NoActionBar"
android:name=".ApplicationName"
>
you can use Intents , Sqlite , or Shared Preferences . When it comes to the media storage, like documents , photos , and videos, you may create the new files instead.
You can do this using two approaches:
Using Application class
Using Shared Preferences
Using Application class
Example:
class SessionManager extends Application{
String sessionKey;
setSessionKey(String key){
this.sessionKey=key;
}
String getSessisonKey(){
return this.sessionKey;
}
}
You can use above class to implement login in your MainActivity as below. Code will look something like this:
#override
public void onCreate (Bundle savedInstanceState){
// you will this key when first time login is successful.
SessionManager session= (SessionManager)getApplicationContext();
String key=getSessisonKey.getKey();
//Use this key to identify whether session is alive or not.
}
This method will work for temporary storage. You really do not any idea when operating system is gonna kill the application, because of low memory.
When your application is in background and user is navigating through other application which demands more memory to run, then your application will be killed since operating system given more priority to foreground processes than background.
Hence your application object will be null before user logs out. Hence for this I recommend to use second method Specified above.
Using shared preferences.
String MYPREF="com.your.application.session"
SharedPreferences pref= context.getSharedPreferences(MyPREF,MODE_PRIVATE);
//Insert key as below:
Editot editor= pref.edit();
editor.putString("key","value");
editor.commit();
//Get key as below.
SharedPreferences sharedPref = getActivity().getPreferences(Context.MODE_PRIVATE);
String key= getResources().getString("key");
On activity result is called before on resume. So move you login check to on resume and your second login can be blocked once the secomd activity has returned a positive result. On resume is called every time so there is not worries of it not being called the first time.
The approach of subclassing has also been used by the BARACUS framework. From my point of view subclassing Application was intended to work with the lifecycles of Android; this is what any Application Container does. Instead of having globals then, I register beans to this context an let them beeing injected into any class manageable by the context. Every injected bean instance actually is a singleton.
See this example for details
Why do manual work if you can have so much more?
class GlobaleVariableDemo extends Application {
private String myGlobalState;
public String getGlobalState(){
return myGlobalState;
}
public void setGlobalState(String s){
myGlobalState = s;
}
}
class Demo extends Activity {
#Override
public void onCreate(Bundle b){
...
GlobaleVariableDemo appState = ((GlobaleVariableDemo)getApplicationContext());
String state = appState.getGlobalState();
...
}
}
You could create a class that extends Application class and then declare your variable as a field of that class and providing getter method for it.
public class MyApplication extends Application {
private String str = "My String";
synchronized public String getMyString {
return str;
}
}
And then to access that variable in your Activity, use this:
MyApplication application = (MyApplication) getApplication();
String myVar = application.getMyString();