I am trying to scan for bluetooth devices using a processing based android app. I would like to use processing to communicate to my microcontroller board via bluetooth as shown in the example below:
http://webdelcire.com/wordpress/archives/1045
I was successful in launching this app on my android tablet. However, I am not able to list the bluetooth device on my tablet. The only bluetooth device that my tablet recognizes is the bluetooth adapter on my computer. Why am I not able to list all the bluetooth devices? My computer is able to recognize the microcontroller's bluetooth device.
Probably your embedded target board identifies itself erroneously as a Bluetooth Device.
The computer's Bluetooth adapter accepts this error, while Android does not.
If you can change the SDP records (Bluetooth search discovery protocol) of the embedded target board, maybe Android will see the device (try making it look as a headset or hands free device!).
The quick way is to change the 'magic numbers' defining the SDP class, service id, etc. The numbers are inside this document. Then see if Android sees your board.
You can also read the Bluetooth Core Spec if you have the time.
See this tutorial for more on the formal aspects, and "Bluetooth for programmers" for a lighter introduction.
Related
I'm trying to implement a Bluetooth (BLE) gateway into a project to transfer data between hardware and a mobile device with an application. The hardware is not unique, it could be mass produced with the controller having the same program flashed into it.
If 100 of the hardware product is made, powered up sitting side by side, what is the best way to set up the information that the BLE broadcasts to advertise so that it can be received by a mobile device, and only 1 hardware and mobile device can be connected at any time.
For example, if you have 3 of the same fitness tracking watches side by side, and you only want to connect to 1 of them, how do you distinguish which is which on say the phones bluetooth pairing menu.
Does each of the manufactured hardware need to have a unique ID that shows on the mobile device (eg ABC11, ABC112, ABC113 etc), and how do you program 100 unique programs into the hardware quickly.
On the other hand, should each of the hardware have the same ID broadcast, and then the user just hopes for the best if the correct hardware is paired.
(BTW, the hardware is an arduino based microcontroller using a BM70 BLE module. neither of which are intended to be modified by the user)
Assistance appreciated.
Thanks. Nunya
You do not have to manually program a different MAC addresses for each device, the BM70 module is the one that provides the BLE MAC address and they are supposed to have unique ones. Sometimes manufacturer recycle (reuse) the addresses, but I think the chance to hit a MAC twice with 100 devies is pretty low.
If your devices are all the same and use the same program they all offer and advertise the same BLE service. The service and containing characteristics are the feature that distinguishes your devices from other BLE devices. A true BLE device that does not also use Bluetooth Classic will not show up in your phones bluetooth settings or pairing menu. BLE requires a dedicated app where you scan for BLE devices and idealy filter for the special service you are using to only find your own devices.
To distinguish between 100 devices placed next to each other (if this even matters since they are all the same) you need to either read the MAC address and prit it on a label for each device or use some status LEDs to show the connection status on your arduino. If you connect to one device the LEDs could start blinking to show which device you are connected to.
I'm setting up a mobile application to support bluetooth communication between an android phone and one dual-mode bluetooth module. Two devices must init a BLE connection and transfer sound through HandsFree profile. At any time, two device must be able to re-establish these communications.
Should application shut down the Classic bluetooth process after sound transferring is done and always connect by BLE??
If I understood your question correctly, you don't need Bluetooth Low Energy (BLE) for your application. If you just want to transfer sound through the HandsFree profile, then this can be accomplished with classic Bluetooth alone and you can even turn BLE for the entirety of the application.
Please see this Android Developer page which gives a step-by-step guide on how to do this and provide sample code:-
https://developer.android.com/guide/topics/connectivity/bluetooth#Profiles
Finally, please note that for the most part BLE and classic Bluetooth are mutually exclusive; even though they are part of the same specification, they are like two different wireless technologies and in almost all cases your application will need one or the other, but not both. Please see this post for more details:-
Can a Bluetooth LE powered device discover a classic Bluetooth device and vice-versa?
I hope this helps.
I'm trying to write an Android app (for APIs 21-27) that initiates a Bluetooth connection between two devices when touched together using NFC, but I can't find a working example and the documentation on the subject is limited. I've already read the NFC Forum's document on simple secure Bluetooth pairing (both 1.0 and 1.1) but it is no help since it talks about sending a devices own MAC address, which can no longer be obtained
I've only been able to find two examples of NFC Bluetooth handover and both of them were from before Android nerfed the ability to get a device's own Bluetooth MAC address. Does anyone know of an NFC Bluetooth handover example that is current (>= Oreo) and works?
I would like to be able to pre-pair bluetooth devices, to save the step of user confusion when using the app. I have discovered that there is a patent for
System, method and apparatus for pre-pairing bluetooth enabled devices.
I am looking at pairing an array of android devices with an array of embedded devices, so when the android device is set up, I can pre-pair it with the devices it needs to communicate with. I have considered maintaining a list of MAC-addresses that can be downloaded and updated by the app.
Is there a way to pair two devices without having to bring them into contact?
My memory is not exact, it's a while ago I poked around in the Bluetooth stack, however, I don't think this is possible.
Basically there is a white list (text file pretty much) which is kept by the system with devices that may connect to your phone, in order to access that white list outside of the Bluetooth api you need to be platform manufacturer. The Bluetooth Api is strongly guarded (by the specification), if you don't fulfill it you can't say your device supports Bluetooth. Pairing is an important part of the Bluetooth security model, I doubt even an oem would be allowed to do this.
One thing you could look into are Bluetooth low energy devices, those don't require pairing prior to connection (you should be able to connect if you have the MAC address), only Bluetooth classic requires pairing.
More info:
https://developer.android.com/guide/topics/connectivity/bluetooth-le.html
No its not possible unless you make changes to the ROM.
If the use-case supports,you can have ble devices advertising data in a pre-defined format so that the app detect your devices.Once you have recognized your devices,you can internally send a pairing request.
I am using bluetooth adapter to discover bluetooth devices. The search displays all devices (iOS , Android, Speakers etc) which are available in surrounding with Bluetooth turned ON.
My App sends and receive data, so installed on two different Android Devices, app can perform a chat functionality, provided both apps are using same App UUID.
Is it possible that when I perform the device discovery/search, I only limit discovery to those devices which are Android and are using my App i.e. my App UUID and not to show all other bluetooth devices.
I know this happens in iOS using characteristic UUID.
Appreciate Response.
1) First you're doing an Inquiry (search) of all nearby devices
2) for each device enumerated, do a Discovery (SDP) on it to gather all its services/profiles; If you found the one you're searchnign for, display it, otherwise forget it...
PS: I have no idea about selecting Android devices only... You can use the CoD (Class Of Device) but not sure that you can separate Android from other "smartphones"...