Develop Reference

How to read frequently contacts in android

I'm trying to get frequently called list. CONTENT_STREQUENT_URI gives you starred and frequently and i want just frequently.
Cursor c = this.getContentResolver (). query (Contacts.CONTENT_STREQUENT_URI,
null, null, null,null);

This may help you in getting frequent/starred contacts that you are searching for. I wrote the getPhoneNumbers method out for you as an example of how to pull the information out of the cursor. Also, note that if you remove the contacts from your device/ unstar them, this will not automatically update your ui. You will need to resync your data. To do this, there are a few ways. In my opinion, if you just refetch this data again it won't be too bad, as you probably don't have too many starred contacts. But for bigger input size, you will want to paginate this list and find a more elegant way than fetching this data every time.
public static List<? extends ContactsModel> getFreqContacts(Context context) {
List<ContactsModel> contacts = new ArrayList<>();
ContentResolver contentResolver = context.getContentResolver();
Cursor cursor = contentResolver.query(ContactsContract.Contacts.CONTENT_URI, null, "starred=?", new String[]{"1"}, "upper(" + ContactsContract.CommonDataKinds.Phone.DISPLAY_NAME + ") ASC");
if(cursor.getCount() > 0) {
while (cursor.moveToNext()) {
final String name = cursor.getString(cursor.getColumnIndex(ContactsContract.Contacts.DISPLAY_NAME));
final String contact_id = cursor.getString(cursor.getColumnIndex(ContactsContract.Contacts._ID));
final Set<String> phone_numbers = getContactPhoneNumber(contentResolver, cursor, contact_id);
final Set<String> emails = getContactEmailAddress(contentResolver, contact_id);
// do whatever you want. Now you have the phone numbers and emails of the contacts you want
}
}
cursor.close();
Collections.sort(faveContactsModels);
return faveContactsModels;
}
private static Set<String> getContactPhoneNumber(ContentResolver contentResolver, Cursor cursor,String id) {
Set<String> contactNumbers = new HashSet<>();
if(Integer.parseInt(cursor.getString(
cursor.getColumnIndex(ContactsContract.Contacts.HAS_PHONE_NUMBER))) > 0
) {
Cursor pCur = contentResolver.query(
ContactsContract.CommonDataKinds.Phone.CONTENT_URI,
null,
ContactsContract.CommonDataKinds.Phone.CONTACT_ID + "= ?",
new String[]{id}, null
);
while(pCur.moveToNext()) {
String phoneNo = pCur.getString(pCur.getColumnIndex(ContactsContract.CommonDataKinds.Phone.NUMBER));
contactNumbers.add(phoneNo);
}
pCur.close();
}
return contactNumbers;
}

Get only numbers shown in the android contactbook

I want to filter what numbers I am getting from Android based on which contacts the user chose to display in his contact book. (For example only contacts saved on the device when all other contacts are excluded)
I read here that you can do this by using
Uri queryUri = ContactsContract.Contacts.CONTENT_URI;
I use following code to read the contacts and I allways get every contact, phone, SIM, etc..
//https://stackoverflow.com/questions/16651609/how-to-display-phone-contacts-only-exclude-sim-contacts
// http://www.higherpass.com/Android/Tutorials/Working-With-Android-Contacts/1/
ContentResolver cr = currentActivity.getContentResolver();
Uri queryUri = ContactsContract.Contacts.CONTENT_URI;
Cursor cur = cr.query(queryUri,
null, null, null, null);
if (cur.getCount() > 0) {
while (cur.moveToNext()) { //Are there still contacts?
//See if the contact has at least one number
if (Integer.parseInt(cur.getString(cur.getColumnIndex(ContactsContract.Contacts.HAS_PHONE_NUMBER))) > 0) {
String id = cur.getString( cur.getColumnIndex(ContactsContract.Contacts._ID) );
String name = cur.getString( cur.getColumnIndex(ContactsContract.Contacts.DISPLAY_NAME) );
ArrayList<String> numbers = new ArrayList<String>();
//Read numbers:
Cursor pCur = cr.query(
ContactsContract.CommonDataKinds.Phone.CONTENT_URI,
null,
ContactsContract.CommonDataKinds.Phone.CONTACT_ID +" = ?",
new String[]{id}, null);
while (pCur.moveToNext()) {
numbers.add( pCur.getString(
pCur.getColumnIndex(ContactsContract.CommonDataKinds.Phone.NUMBER)) );
Log.e("Contactbook", "The latest added number is: " + numbers.get(numbers.size()-1) );
}
pCur.close();
}
}
}
What am I missing? This code still gives me both SIM and phone contacts to the log.
Edit: To clarifify, in the contactbook you got the "Display options". In there ist the "select contacts to display"-option, and I want to read the contacts that are shown based on the users choice there. So if a user choses to show only SIM-contacts, read only SIM-contacts, if he choses to only show Phone-Contacts, show onyl phone contacts etc...

Try with following "selection".
String selection = ContactsContract.Contacts.IN_VISIBLE_GROUP + " = ?";
From Android docs:
public static final String IN_VISIBLE_GROUP: An indicator of whether this contact is supposed to be visible in the UI. "1" if the contact has at least one raw contact that belongs to a visible group; "0" otherwise.
This should be your "selection" argument in query API.
Update: I tried below code on Android-2.3(I know it is old device, but right now Don't have newer device with me).
final ContentResolver cr = getContentResolver();
String[] projection = new String[] { ContactsContract.Contacts._ID, ContactsContract.Contacts.DISPLAY_NAME };
String selection = ContactsContract.Contacts.IN_VISIBLE_GROUP + " = ?" ;
String[] Args = { "1" };
final Cursor contacts = cr.query(
ContactsContract.Contacts.CONTENT_URI, projection,
selection,Args ,
null);
This could be a long operation (depending on no. of contacts), hence you should use CursorLoader class (A loader that queries the ContentResolver and returns a Cursor) for this.
cursorLoader.loadInBackground();
This will be called on a worker thread to perform the actual load and to return the result of the load operation.

You can easily create two Arrays for each kind of contacts
ArrayList<String> simContacts = new ArrayList<>();
//get all sim contacts
Uri simUri = Uri.parse("content://icc/adn");
Cursor cursorSim = getContext().getContentResolver().query(simUri, null, null, null, null);
while (cursorSim.moveToNext()) {
simContacts.add(cursorSim.getString(cursorSim.getColumnIndex("name")));
}
}
ArrayList<String> allContacts = new ArrayList<>();
//get all contacts
Cursor cur = cr.query(ContactsContract.Contacts.CONTENT_URI,
null, null, null, null);
if (cursor != null && cursor.getCount() > 0) {
while (!cursor.isAfterLast()) {
String phoneNumber = cursor.getString(cursor.getColumnIndexOrThrow(ContactsContract.CommonDataKinds.Phone.NUMBER));
String displayNameColumn = Utils.hasHoneycomb() ? ContactsContract.Contacts.DISPLAY_NAME_PRIMARY : ContactsContract.Contacts.DISPLAY_NAME;
String displayName = cursor.getString(cursor.getColumnIndexOrThrow(displayNameColumn));
//check if simContacts Array contains this particular name
if (!simContacts.contains(displayNameColumn){
allContacts.add(displayNameColumn);
}
}
}
This is just a working example,of course you can modify to your needs.You can parse more contact fields and make more complication queries.

How to fast the contacts loading in listview on android

in my app i am listing contacts in a listview. no of contacts is 1000+. i get the contacts
by using ContentResolver query that is cr.query(...),store the values in an arraylist
and after that load the array list in setListAdapter(...). to display the all contacts my
apps takes nearly 1 minute so that i use Async task but there is no big differences by using the async task.
i need to display all contacts within 2 to 4 seconds. i check in the default contacts
application on android simulator which is load within in 2 to 4 seconds. i have spend
long time in google. but i could not get any helpful solution. please help me how to fast the loading contacts on listview. please help me.
my coding sample:
private ArrayList<ContactListEntry> loadContactListInternal(String searchString) {
ArrayList<ContactListEntry> contactList = new ArrayList<ContactListEntry>();
ContentResolver cr = getContentResolver();
Cursor cur = null;
String[] projection = new String[] {BaseColumns._ID,ContactsContract.Contacts.DISPLAY_NAME,ContactsContract.Contacts.PHOTO_ID};
....
cur=cr.query(ContactsContract.Contacts.CONTENT_URI, projection, selection, null, ContactsContract.Contacts.DISPLAY_NAME + " ASC");
while (cur.moveToNext()) {
int id = Integer.parseInt(cur.getString(0));
....
if (input !=null)
photo = BitmapFactory.decodeStream(input);
....
ArrayList<ContactListEntry.PhoneEntry> phoneEntries = new ArrayList<ContactListEntry.PhoneEntry>();
String[] projection1 = new String[] {ContactsContract.CommonDataKinds.Phone.NUMBER,ContactsContract.CommonDataKinds.Phone.TYPE};
Cursor pcur = cr.query(ContactsContract.CommonDataKinds.Phone.CONTENT_URI,projection1, ContactsContract.CommonDataKinds.Phone.CONTACT_ID + " = ?", new String[] { String.valueOf(id) }, null);
while (pcur.moveToNext()) {
...
}
pcur.close();
ContactListEntry entry = new ContactListEntry(id, name, photo, phoneEntries);
contactList.add(entry);
}
cur.close();
return contactList;
}
.....
in another class
private void selectionUpdated() {
....
setListAdapter(new SelectedArrayAdapter(this, app.selectedContacts));
...
}

Use the Concept of projections and selection arguments to retrive the contacts in my case for 500 contacts intially it was taking 12 sec.
Now it is taking 350ms(lessthan second)
void getAllContacts() {
long startnow;
long endnow;
startnow = android.os.SystemClock.uptimeMillis();
ArrayList arrContacts = new ArrayList();
Uri uri = ContactsContract.CommonDataKinds.Phone.CONTENT_URI;
String selection = ContactsContract.Contacts.HAS_PHONE_NUMBER;
Cursor cursor = ctx.getContentResolver().query(uri, new String[]{ContactsContract.CommonDataKinds.Phone.NUMBER, ContactsContract.CommonDataKinds.Phone.DISPLAY_NAME, ContactsContract.CommonDataKinds.Phone._ID, ContactsContract.Contacts._ID}, selection, null, ContactsContract.CommonDataKinds.Phone.DISPLAY_NAME + " ASC");
cursor.moveToFirst();
while (cursor.isAfterLast() == false) {
String contactNumber = cursor.getString(cursor.getColumnIndex(ContactsContract.CommonDataKinds.Phone.NUMBER));
String contactName = cursor.getString(cursor.getColumnIndex(ContactsContract.CommonDataKinds.Phone.DISPLAY_NAME));
int phoneContactID = cursor.getInt(cursor.getColumnIndex(ContactsContract.CommonDataKinds.Phone._ID));
int contactID = cursor.getInt(cursor.getColumnIndex(ContactsContract.Contacts._ID));
Log.d("con ", "name " + contactName + " " + " PhoeContactID " + phoneContactID + " ContactID " + contactID)
cursor.moveToNext();
}
cursor.close();
cursor = null;
endnow = android.os.SystemClock.uptimeMillis();
Log.d("END", "TimeForContacts " + (endnow - startnow) + " ms");
}
More information on this link http://www.blazin.in/2016/02/loading-contacts-fast-from-android.html ....

So your problem is that you do a lot of subqueries for each contact. I has the same issue once upon a time. My case was that I showed many contacts and allowed the user to click on any of them. After that I started processing the contact in another activity.
Back then I finally decided that I should display only the name and lazily fetch all the other data later on, just before I launch the next activity. This was amazing: decreased the speed of my program almost by a factor of 200, and the operations became completely invisible to the user.
The default android list does the same if I am not wrong - it displays only the name, and later on loads all the other contact-related data.

i use cursor adapter and i cut the databse,arrayadapter and optimize the code.

Consider having just one query and getting rid of the sub query idea (as already suggested). You can achieve speed by just querying using the Content Uri:
"ContactsContract.CommonDataKinds.Phone.CONTENT_URI"
This URI also has the "ContactsContract.Contacts.DISPLAY_NAME" field.
You might also want to consider doing this query and working with your adapter in a seperate thread to make it completely transparent.
This worked for me.

OPTIMIZED SOLUTION HERE.....
private static final String[] PROJECTION = new String[] {
ContactsContract.CommonDataKinds.Phone.CONTACT_ID,
ContactsContract.Contacts.DISPLAY_NAME,
ContactsContract.CommonDataKinds.Phone.NUMBER
};
.
.
.
ContentResolver cr = getContentResolver();
Cursor cursor = cr.query(ContactsContract.CommonDataKinds.Phone.CONTENT_URI, PROJECTION, null, null, null);
if (cursor != null) {
try {
final int nameIndex = cursor.getColumnIndex(ContactsContract.Contacts.DISPLAY_NAME);
final int numberIndex = cursor.getColumnIndex(ContactsContract.CommonDataKinds.Phone.NUMBER);
String name, number;
while (cursor.moveToNext()) {
name = cursor.getString(nameIndex);
number = cursor.getString(numberIndex);
}
} finally {
cursor.close();
}
}
CHEERS...:)

Android - Find a contact by display name

I'm trying to find a contact by display name. The goal is to open this contact and add more data to it (specifically more phone numbers), but I'm struggling to even find the contact I want to update.
This is the code I'm using:
public static String findContact(Context context) {
ContentResolver contentResolver = context.getContentResolver();
Uri uri = ContactsContract.CommonDataKinds.Phone.CONTENT_FILTER_URI;
String[] projection = new String[] { PhoneLookup._ID };
String selection = ContactsContract.CommonDataKinds.Phone.DISPLAY_NAME + " = ?";
String[] selectionArguments = { "John Johnson" };
Cursor cursor = contentResolver.query(uri, projection, selection, selectionArguments, null);
if (cursor != null) {
while (cursor.moveToNext()) {
return cursor.getString(0);
}
}
return "John Johnson not found";
}
I do have a contact called "John Johnson", but the method always returns "not found". I also tried searching for a contact with just one name, so that makes no difference.
I suspect that it's something wrong with the uri, selection or selection arguments, because I couldn't find any example online of searching for contacts with a given display name, and it seems display name is a special kind of information, different from for example a phone number.
Any ideas how I can achieve to find John Johnson?
UPDATE: I found out how to find a contact by display name:
ContentResolver contentResolver = context.getContentResolver();
Uri uri = Data.CONTENT_URI;
String[] projection = new String[] { PhoneLookup._ID };
String selection = StructuredName.DISPLAY_NAME + " = ?";
String[] selectionArguments = { "John Johnson" };
Cursor cursor = contentResolver.query(uri, projection, selection, selectionArguments, null);
if (cursor != null) {
while (cursor.moveToNext()) {
return cursor.getString(0);
}
}
return "John Johnson not found";
This code returns the contact id of the first contact with display name "John Johnson". In my original code I had the wrong uri and the wrong selection in my query.

I thinks the issue may caused by the projection you set. Projection is used to tell android which column of data you want to query then you only give the id column so the display name won't return. Try to remove the projection to see whether it works.
-- Cursor cursor = contentResolver.query(uri, projection, selection, selectionArguments, null);
++ Cursor cursor = contentResolver.query(uri, null, selection, selectionArguments, null);

Change Your Query URI.
You are using a URI that is meant to filter only phones numbers:
Uri uri = ContactsContract.CommonDataKinds.Phone.CONTENT_FILTER_URI;
You need to use a URI that has access to the display_name column, like this:
Uri uri = ContactsContract.Data.CONTENT_URI;
There's a decent breakdown of what URIs to use and when to use them on the Android SDK Documentation:
If you need to read an individual contact, consider using CONTENT_LOOKUP_URI instead of CONTENT_URI.
If you need to look up a contact by the phone number, use PhoneLookup.CONTENT_FILTER_URI, which is optimized for this purpose.
If you need to look up a contact by partial name, e.g. to produce filter-as-you-type suggestions, use the CONTENT_FILTER_URI URI.
If you need to look up a contact by some data element like email address, nickname, etc, use a query against the ContactsContract.Data table. The result will contain contact ID, name etc.

//method for gaining id
//this method get a name and make fetch it's id and then send the id to other method //named "showinformation" and that method print information of that contact
public void id_return(String name) {
String id_name=null;
Uri resultUri = ContactsContract.Contacts.CONTENT_URI;
Cursor cont = getContentResolver().query(resultUri, null, null, null, null);
String whereName = ContactsContract.Data.MIMETYPE + " = ? AND " + ContactsContract.CommonDataKinds.StructuredName.DISPLAY_NAME + " = ?" ;
String[] whereNameParams = new String[] { ContactsContract.CommonDataKinds.StructuredName.CONTENT_ITEM_TYPE,name};
Cursor nameCur = getContentResolver().query(ContactsContract.Data.CONTENT_URI, null, whereName, whereNameParams, ContactsContract.CommonDataKinds.StructuredName.GIVEN_NAME);
while (nameCur.moveToNext()) {
id_name = nameCur.getString(nameCur.getColumnIndex(ContactsContract.CommonDataKinds.StructuredName.CONTACT_ID));}
nameCur.close();
cont.close();
nameCur.close();
//for calling of following method
showinformation(id_name);
}
//method for showing information like name ,phone, email and other thing you want
public void showinformation(String id) {
String name=null;
String phone=null;
String email=null;
Uri resultUri = ContactsContract.Contacts.CONTENT_URI;
Cursor cont = getContentResolver().query(resultUri, null, null, null, null);
String whereName = ContactsContract.Data.MIMETYPE + " = ? AND " + ContactsContract.CommonDataKinds.StructuredName.CONTACT_ID+ " = ?" ;
String[] whereNameParams1 = new String[] { ContactsContract.CommonDataKinds.StructuredName.CONTENT_ITEM_TYPE,id};
Cursor nameCur1 = getContentResolver().query(ContactsContract.Data.CONTENT_URI, null, whereName, whereNameParams1, ContactsContract.CommonDataKinds.StructuredName.GIVEN_NAME);
while (nameCur1.moveToNext()) {
name = nameCur1.getString(nameCur1.getColumnIndex(ContactsContract.CommonDataKinds.StructuredName.DISPLAY_NAME));}
nameCur1.close();
cont.close();
nameCur1.close();
String[] whereNameParams2 = new String[] { ContactsContract.CommonDataKinds.Phone.CONTENT_ITEM_TYPE,id};
Cursor nameCur2 = getContentResolver().query(ContactsContract.Data.CONTENT_URI, null, whereName, whereNameParams2, ContactsContract.CommonDataKinds.StructuredName.GIVEN_NAME);
while (nameCur2.moveToNext()) {
phone = nameCur2.getString(nameCur2.getColumnIndex(ContactsContract.CommonDataKinds.Phone.NUMBER));}
nameCur2.close();
cont.close();
nameCur2.close();
String[] whereNameParams3 = new String[] { ContactsContract.CommonDataKinds.Email.CONTENT_ITEM_TYPE,id};
Cursor nameCur3 = getContentResolver().query(ContactsContract.Data.CONTENT_URI, null, whereName, whereNameParams3, ContactsContract.CommonDataKinds.StructuredName.GIVEN_NAME);
while (nameCur3.moveToNext()) {
email = nameCur3.getString(nameCur3.getColumnIndex(ContactsContract.CommonDataKinds.Email.DATA));}
nameCur3.close();
cont.close();
nameCur3.close();
String[] whereNameParams4 = new String[] { ContactsContract.CommonDataKinds.StructuredPostal.CONTENT_ITEM_TYPE,id};
Cursor nameCur4 = getContentResolver().query(ContactsContract.Data.CONTENT_URI, null, whereName, whereNameParams4, ContactsContract.CommonDataKinds.StructuredPostal.DATA);
while (nameCur4.moveToNext()) {
phone = nameCur4.getString(nameCur4.getColumnIndex(ContactsContract.CommonDataKinds.StructuredPostal.DATA));}
nameCur4.close();
cont.close();
nameCur4.close();
//showing result
txadd.setText("Name= "+ name+"\nPhone= "+phone+"\nEmail= "+email);
}
//thank all persons in this site because of many help of me to learn and correction my warn and errors this is only a gift for all of you and ...

The below code should do the trick
if (displayName != null) {
Uri lookupUri = Uri.withAppendedPath(ContactsContract.Contacts.CONTENT_FILTER_URI, Uri.encode(displayName));
String[] displayNameProjection = { ContactsContract.Contacts._ID, ContactsContract.Contacts.LOOKUP_KEY, Build.VERSION.SDK_INT >= Build.VERSION_CODES.HONEYCOMB ? ContactsContract.Contacts.DISPLAY_NAME_PRIMARY : ContactsContract.Contacts.DISPLAY_NAME };
Cursor cur = context.getContentResolver().query(lookupUri, displayNameProjection, null, null, null);
try {
if (cur.moveToFirst()) {
return true;
}
} finally {
if (cur != null)
cur.close();
}
return false;
} else {
return false;
}
Reference: Retrieving a List of Contacts Article

Android - How to fetch a contact name and number without using Cursors?

I have a big performance issue in my app. After going through traceview i found that most of my app's performance has been consumed by cursors. So i was wondering is there any alternative to Cursors for dealing with device contact list. And if there is no alternative then please advise me how to deal with cursors so it won't slow down your app.
Please HELP!!
Thanks.
This part of my code has performance issue :-
public void getDisplayName()
{
Cursor c1 = this.getContentResolver().query(ContactsContract.Contacts.CONTENT_URI, null, null, null, null);
String personName = null, number = null;
try
{
Log.e(TAG, "I am here!!");
if(c1.getCount() > 0)
{
Log.e(TAG, "I am here2!!");
while(c1.moveToNext())
{
HashMap<String,String> item = new HashMap<String,String>();
String id = c1.getString(c1.getColumnIndex(Contacts._ID));
personName = c1.getString(c1.getColumnIndex(Contacts.DISPLAY_NAME));
item.put("Name", personName);
Cursor cur = this.getContentResolver().query(CommonDataKinds.Phone.CONTENT_URI, null, CommonDataKinds.Phone.CONTACT_ID +" = ?", new String[]{id}, null);
while(cur.moveToNext())
{
Log.e(TAG, "I am here!!3");
number = cur.getString(cur.getColumnIndex(CommonDataKinds.Phone.NUMBER));
item.put("Number", number);
}
displayName.add(item);
}
}
}
finally
{
c1.close();
}
}

How to fetch a contact name and number without using Cursors?
That is not possible.
I have a big performance issue in my app.
Rather than using a single query, you use N+1 queries, where N is the number of rows returned by the other query. This is guaranteed to give you poor performance compared to just doing a single query.
You can get the user's name and _ID along with the phone numbers:
String[] PROJECTION=new String[] { Contacts._ID,
Contacts.DISPLAY_NAME,
Phone.NUMBER
};
Cursor c=a.managedQuery(Phone.CONTENT_URI, PROJECTION, null, null, null);
Also, never call getColumnIndex() in a loop, since the value never changes.

I was working on same code and I need email and phone numbers both in first approach It took around 35 seconds to fetch 612 contacts, when I optimized it, it took 2 seconds to fetch 612 contacts
my code.
ContentResolver cr = context.getContentResolver();
String[] projection = new String[] { Contacts.DISPLAY_NAME, Phone.NUMBER };
String selection = ContactsContract.Contacts.HAS_PHONE_NUMBER + " = ?";
String[] selectionArgs = { String.valueOf(1) };
Cursor cur = cr.query(Phone.CONTENT_URI, projection, selection, selectionArgs, null);
if (cur.getCount() > 0) {
while (cur.moveToNext()) {
String name = cur.getString(cur.getColumnIndex(ContactsContract.Contacts.DISPLAY_NAME));
String phNo = cur.getString(cur.getColumnIndex(Phone.NUMBER));
ContactModel contactModel = new ContactModel();
contactModel.setName(name);
contactModel.setPhoneNumber(phNo);
contactList.add(contactModel);
}
}
String[] projectionEmail = new String[] { Contacts.DISPLAY_NAME, Email.ADDRESS };
String selectionEmail = ContactsContract.Contacts.HAS_PHONE_NUMBER + " = ?";
String[] selectionArgsEmail = { String.valueOf(1) };
Cursor curEmail = cr.query(Email.CONTENT_URI, projectionEmail, selectionEmail, selectionArgsEmail, null);
if (curEmail.getCount() > 0) {
while (curEmail.moveToNext()) {
String Emailname = curEmail.getString(curEmail.getColumnIndex(ContactsContract.Contacts.DISPLAY_NAME));
String email = curEmail.getString(curEmail.getColumnIndex(Email.ADDRESS));
ContactModel contactModel = new ContactModel();
contactModel.setName(Emailname);
contactModel.setEmailId(email);
contactList.add(contactModel);
}
}
`