I find many things in DDMS Emulator Control tab, I just want to make/simulate a call from DDMS. How to do that. Also where can I find details about Emulator Control tab?
Thanx
Call as if to simulate a phone call?
1 Window > Open Perspective > DDMS
2 'Emulator Control' Tab
3 In Telephony Actions, enter any number in 'Incoming Number' textfield.
4 Choose 'Voice' from the two radiobuttons.
5 Finally, click on Call.
To disconnect, click Hang up.
More here.
Hope this helps...
I think you have received an appropriate answer for making a call to your emulator. Just refer more details about Emulator Control tab at link: http://developer.android.com/tools/debugging/ddms.html#ops-location
Take a look at Using DDMS where you will find all the required info.
You can do DDMS jobs via telnet:
Type in CMD:
telnet
open localhost 5554
sms send 000000 hello
The list of available commands:
event simulate hardware events
geo Geo-location commands
gsm GSM related commands
cdma CDMA related commands
kill kill the emulator instance
network manage network settings
power power related commands
quit|exit quit control session
redir manage port redirections
sms SMS related commands
avd control virtual device execution
window manage emulator window
qemu QEMU-specific commands
sensor manage emulator sensors
Other than DDMS, there is one more option:
The emulator automatically forwards simulated voice calls from one instance to another. To send a voice call, use the dialer application application, respectively, from one of the emulators.
To initiate a simulated voice call to another emulator instance:
1.Launch the dialer application on the originating emulator instance.
2.As the number to dial, enter the console port number of the instance you'd like to call. You can determine the console port number of the target instance by checking its window title, where the console port number is reported as "Android Emulator (<port>).
3.Press "Dial". A new inbound call appears in the target emulator instance.
Related
I try to change the network type from android emulator. From the official android documentation (https://developer.android.com/studio/run/emulator-commandline.html), i want to use network to change LTE/UMTS/GPRS network type. I create a new emulator from the last Android Studio 2.2 and connect with telnet. I run the help command (after authentication) and I get :
Android console command help:
help|h|? print a list of commands
crash crash the emulator instance
kill kill the emulator instance
quit|exit quit control session
redir manage port redirections
power power related commands
event simulate hardware events
avd control virtual device execution
finger manage emulator fingerprint
geo Geo-location commands
sms SMS related commands
cdma CDMA related commands
gsm GSM related commands
rotate rotate the screen by 90 degrees
I don't see network as explain in the documentation and when I try to run a network command, I get an error... Anybody have already met this issue ? Any idea how to solve it ?
Ok, seems to be delete in last versions of the emulator. I hope the android team will implement this feature soon.
https://code.google.com/p/android/issues/detail?can=2&start=0&num=100&q=emulator%20network%20unknown&colspec=ID%20Status%20Priority%20Owner%20Summary%20Stars%20Reporter%20Opened&groupby=&sort=-id%20-stars&id=204888
As we know, we can make an incoming call or send sms to emulator by telnet command.
But I need make an incoming call on android side. Because telnet is just used for login in android side,so I think there must be a way to execute command on android side.
Is there anyone know how to make it?
From : Make incoming call in Android emulator without command code
Create a second emulator. Use the first emulator to call the second emulator. Emulator's number is the port number. 5554, 5556 etc.
Just follow Go to Window ===> Open Perspective & choose DDMS
In DDMS click on Emulator Control, then select Voice. Enter number of the emulator on which you want to make the call. and then click on call.
I'm trying to develop a small app that will be registered on PhoneStateListener and do some magic over incoming and outgoing calls monitor. For debugging purposes, I need to trigger onCallStateChanged(...) event from outside of phone, not perform real incoming voice call.
Is it possible to do this somehow with sending phone number to debugged app without command line code?
create one more emulator on avd machine. You can find the emulator number from top of the emulator. Eg. 5554 this number is like phone number you can enter the emulator this number(5554 or 5556 or somting) and make a incoming call.
enjoy ...
Just follow Go to Window ===> Open Perspective & choose DDMS
In DDMS click on Emulator Control then select Voice and write number of another emulator on which You want to call. and then click on call .
You can find another emulator number from top of the emulator.
Hope it will helps you.
You can use DDMS perspective in eclipse for initiating dummy calls , message etc
You can see DDMS perspective on top right corner if you do not see it
Go to Window ===> Open Perspective & choose DDMS
Try one more emulator. You can find the emulator number from top of the emulator. Eg. 5556
Looking for a program, or, if it doesn't exist, a way to capture the screen of an Android-based device (proprietary touch-remotes) by entering the IP address of the device.
Anyone know of something that could do this for me or, if not, what I might need to do to package up something that could do this?
Actually, the "screen capture" capability is built into Android itself - DDMS simply invokes it.
It would be fairly straightforward to:
a) write an Android service, that
b) listens on a port, and
c) does its own screen capture when invoked.
Here's an example for programmatically doing a screen capture:
Get Webview content into bitmap
Android Screenshots and Screen Capture
You could use something like Wifi ADB to setup an ADB connection over Wifi. It should then be possible to get the screen shot using the device using DDMS.
EDIT: Actually, I ended up writing a simple C++ program that asks for an IP address in a console window, does command "adb connect " with the input IP address, thus establishing a connection via ADB to a device at a specified IP address, and then the C++ program starts up "Droid#Screen" software. Since the ADB is already started, the program will simply display whatever is coming in from the ADB! I have a feeling other 3rd party programs would work too.
I am developing a small application on Google's android emulator.
I am trying to figure out how I can simulate a phone call from one instance of an emulator to another (both running on my computer). Does anyone know how this can be done?
Thank you very much.
Launch the dialer application on the
first emulator. As the
number to dial, enter the console
port number of the second emulator you'd
like to simulate a call on.
You can see the port number of the instance in the windows title of the emulator.
alt text http://www.freeimagehosting.net/uploads/6c15bc13f1.png
Press "Dial". A new inbound
call appears in the second emulator
instance.
Alternatively to the solution provided by Kami, you can use DDMS or just the android console (in Linux and assuming emulator port is 5554):
$ telnet localhost 5554 <<!
> gsm call 12345678
> !
simply open the DDMS from the eclipse and choose emulator control
and you'll find a tel bar just type the phone number you want the emulator to receive and hit call
In order for calling the port number to work, both emulator instances must be started from the same android AVD manager process. Two separate 'android' processes launching different emulators will not be able to call each other.
In Emulator's "Extended Controls" window, there's an option to ring the phone artificially by means of a button "Call Device". See screenshot below: