I am trying to create the android emulator for Nexus 10 using latest ADT(21) and SDK tools. I have the following configuration for the Nexus 10 AVD:
Screen Size - 10 inches
Resolution - 2560 X 1600
Screen Size - xlarge Screen Density - Xhdpi
Screen ratio - long
RAM - 1024
Let me know if this configuration is wrong. After creating the above Configuration I was able to create the AVD but couldn't load it. It only shows a black screen. What could be the problem here?
I am Using Ubuntu 11.10.
I had the same issue. You can do one thing,
1) When you create AVD, make sure Use Host GPU option is checked.
It worked for me, in my Mac OS X Mountain Lion 10.8.2, and eclipse juno.
EDIT : Sorry folks for the confusion. There is no Google Nexus 10 skin (at the time of writing this). What you see in the image is a Nexus 10 equalant I created using Device Definition (AVD manager 2nd tab) feature of eclipse. It is just I named it as Nexus 10 and it is not default google emulator.
I think the monitor resolution is more important than the hardware of your computer. I have a PC i7 & 16GB RAM under Windows 7, with two DELL monitor 1920x1080 and it is imposible to run Nexus 10 emulator. This computer runs Nexus 7 emulator perfectly.
But my less powerfull iMac i5 & 8 GB RAM under OSX Mountain Lion, runs perfectly Nexus 10 AVD.
I have tried with/without use host gpu option, and only work when it is checked.
I have tried to emulate other devices like Samsung Galaxy S4 and it happens the same!
By the way, it is recomended to specify low value RAM and SD Card values for performance (512MB & 16-96MB).
I had the same issue (have, actually). It is quite simple, the resolution and the screen density are just too high for your monitor (on that screen size), so it cannot display it. - I am sure your emulator runs perfectly on other configurations
This is the correct configuration for an Nexus 10 Android Virtual Device:
Your screensize and density was wrong.
Screen Size - 10.1 inches Resolution - 2560x1600
Size - xlarge Density - xxhdpi
Screen Ratio - long RAM - 2048 MiB
One more way is to use new
Genymotion Android Emulator
It is available for Ubuntu also , have a look at my post for other info related to it.
With IntelliJ you need to open tools - android - AVD manager and then when you add a new AVD try ensuring that your CPU/ABI is set to ARM(armeabi) Had some trouble before like this and it was down to this setting.
Hope this helps!
Related
This question already has answers here:
Android : How to Create Android Emulator for Nexus10?
(6 answers)
Closed 9 years ago.
I know this question is a duplicate to the following,
Android : How to Create Android Emulator for Nexus10?
Nexux 10 emulator/avd not running/starting
I have set the below configuration,
Screen Size - 10 inches
Resolution - 2560 X 1600
Screen Size - xlarge
Screen Density - Xhdpi
Screen ratio - long
My system configuration is,
Intel Core i3 processor
4GB Ram
Windows 7(32 bit)
Monitor resolution-1366*768
I had tried those answers and set accordingly but no luck.Even I scaled down the screen size .AVD runs and shows "Emulator not responding " message and then I was forced to close the AVD.
Can't I run Nexus 10 AVD for the above configuration system? Any help and guidance will be highly appreciated.
I am not sure about this message - "Emulator not responding" ,
but you can try new Genymotion Android Emulator, have a look at it , it is faster and you can resize it.
Below configuration is available in list of virtual devices.
WXGA 10.1" Tablet - 4.2.2 API 17 - 1280*800 Genymotion Virtual Device - 160dpi (MDPI)
you can change the screen density after creation of Virtual Device
FYI : Genymotion Android Emulator is an alternate way to Google Android Emulator.
To make the Nexus 10 AVD work, you need to set the AVD memory to something higher, try 512mb.
if you didn't depend on ARM CPU, try genymotion.
I have android sdk , updated to latest version(v21).
Now what i want is :
Make emulator of Asus google nexus 7, that contains 800 x 1280 resolution and 216 dpi.
As i updated my sdk to latest version i can not edit my current dpi of emulator.
Please help me to create this AVD.
Make emulator of Asus google nexus 7, that contains 800 x 1280
resolution and 216 dpi.
To make emulator same as Google Asus Nexus 7 you will get this as default device while creating new AVD.
As i updated my sdk to latest version i can not edit my current dpi of
emulator.
for this you can delete and can create New Emulator from latest AVD with the Below suggestions.
After Update your ADT to version 21.
In Older Version each time you have to set Add Custom Screen if you want custom Device Configurations as (if you want Nexus 4).
In ADT21 version you can get this thing done by
open AVD Manager, u can define your custom screen in "Device Definition"
Alternative (Much Easier approach)
in Newest Version you Don't Need to Set Custom Device
Configurations from the above Suggestion as much easier way is available for it. you >Just Have to Make Emulator With your Device
Configurations and after you will see those Configurations with
Emulator Name Inside Graphical Layout of XML
like after Created my Emulator of Nexus7 Emulator with Android 4.2 with Name as "Nexus7_Android_4.2" i will get this Device Configuration in Graphical Layout of xml automatically.
Below is the Screen Shot of it.
Hope it will Help you.
I want to create a Android Virtual device that resembles a 7 inch tablet running Android version 2.3.3. There is nothing similar to that available in the SDK and when I try various combinations in the AVD settings it doesnt work out. I am using LCD Pixel Height and Width of 1024 X 600.
How can I create a virtual device that resembles a 7 inch tablet in the landscape mode. Any help is greatly appreciated...
A great example of doing this can be found in the Amazon Kindle Fire FAQ:
https://developer.amazon.com/help/faq.html#KindleFire
We also recommend that you test your app on your own and submit an
update if you discover any problems. It is possible to configure a
standard Android emulator to simulate the Kindle Fire device platform.
You should configure your emulator with the following characteristics:
Width: 600px
Height: 1024px
Abstracted LCD Density: 169
Target: Android 2.3.4 - API Level 10
RAM: 512 MB
Android Virtual Device Manager
new (name: Tablet 7inTest or whatever you want but name must not
Exist in your emulators list)
ok very next thing you have to do is Select Resolution in Skin category type 1200x800
and click on Create AVD
Does anyone have the HTC Desire HD setup in their SDK? if so could you please tell me what settings you picked to configure the AVD.
I have a website that renders properly on all android devices besides this one, so testing it is imperative !
Thank You
I have 2 configurations,
Android 2.2 API 8 skin WVGA800 240 density
Android 2.3.3 API 10 same skin and density
The only one that I use at the moment, is the 2nd because of the official gingerbread on DHD.
The only setting which should affect the rendering of the site is the resolution. The Desire uses a 800x480 (WVGA) resolution screen.
I'm trying to emulate an Acer AOD250 that has a 1024x600 screen and comes with Android. If I create an AVD with default settings except for resolution of 1024x600 and SDK 3, the emulator does not start. The largest I can get working is 670x600. At larger resolutions, sometimes the emulator starts, but does not complete the boot. Is there a memory setting or something that I can change to allow the emulator to work on a screen this big?
Samsung release a plug-in for galaxy TAB !
screen resolution of 1024x600
http://innovator.samsungmobile.com/galaxyTab.do
You can run Android in a virtual machine (e.g.: Virtual Box) using a Android iso