There is a problem when using Google Navigation on Android with a Bluetooth device. Navigation sends the audio for the turn-by-turn instructions over the A2DP stream. I have a Motorola T605 Bluetooth car kit and it supports HFP and A2DP. I often just listen to the old fashioned car radio though. In this scenario I never hear turn-by-turn directions because my live A2DP stream is being sent to the radio AUX input but I am listening to the radio instead. My app has a feature where it reads out SMS messages to me. I have it set up so you can pick the stream you want to use for this. I prefer using AudioManager.STREAM_VOICE_CALL since it uses a dedicated separate speaker on the T605.
I have looked into a few ways to handle this:
1) Reroute notifications to Bluetooth SCO instead of A2DP. I have not fund a way to do this. I am able to send TTS messages I create over this path and it works great (I have an SMS reader built into my app). I tried activating SCO but the turn-by-turn instructions stream moves to the phone internal speaker instead of the voice call stream like I would prefer.
2) Capture the navigation messages and echo them back over the SCO path. I can't find a way to intercept or capture the navigation stream though. Does Google Navigation use the TTS engine or its own methods to create the voice output? It would be great to just get the directions in a text string since I could easily send that to the TTS engine and route it where I want like I do with SMS strings.
You can see my app source here: http://code.google.com/p/a2dpvolume/
Any thoughts?
Unfortunately I think you're SOOL when it comes to rerouting the navigation messages to BT SCO. I would expect the navigation app to use either the TTS or NOTIFICATION stream type to play the messages, and both of those stream types follow the MEDIA routing strategy (for NOTIFICATIONs that is at least typically true when there's no active voice call).
Although the behavior is up to each vendor to decide, my guess is that you'll find that in most implementations streams that follow the MEDIA routing strategy won't ever be routed to BT SCO, except during an ongoing voice call that is routed to BT SCO.
The best you could do in terms of routing is to force the routing to the loudspeaker, or to "anything but A2DP" (which means wired headset if one is attached, or the loudspeaker otherwise).
Here's how you could do that (I haven't verified that this works on every phone out there):
Class audioSystemClass = Class.forName("android.media.AudioSystem");
Method setForceUse = audioSystemClass.getMethod("setForceUse",
int.class,
int.class);
// 1 == FOR_MEDIA, 10 == FORCE_NO_BT_A2DP (FORCE_SPEAKER would be 1).
setForceUse.invoke(null, 1, 10);
Related
In my Android WebRTC client to send DTFM tones I use code like this
val audioSource = peerConnectionFactory.createAudioSource(MediaConstraints())
val localAudioTrack = peerConnectionFactory.createAudioTrack("audio", audioSource)
peerConnection.addTrack(localAudioTrack)
peerConnection?.senders?.firstOrNull()?.let {
it.dtmf()?.insertDtmf(code, 400, 50)
}
But it seems tone does not reach a peer, and there is erro message in logcat
dtmf_sender.cc E (line 126): InsertDtmf is called on DtmfSender that can't send DTMF.
No matter what device I use.
Why could it happen?
There are multiple reasons why this could happen, one of them being that the other party in the WebRTC connection does not support the RTP telephone-event
Also, check this example: https://developer.mozilla.org/en-US/docs/Web/API/WebRTC_API/Using_DTMF
(haven't tried it myself though)
Pay attention to this:
"Note, however, that although it's possible to send DTMF using WebRTC, there is currently no way to detect or receive incoming DTMF. WebRTC currently ignores these payloads; this is because WebRTC's DTMF support is primarily intended for use with legacy telephone services"
I have found, problem is that peers are not connected via RTP. I mean WebRTC did not found yet suitable route, basing on ICE candidates gathered, to pass audio traffic.
As only route is constructed, traffic goes on, and sender comes ready to send DTMF tones.
To be ensured that peers are ready to trancieve media, you may look on connection state in PeerConnection.Observer.onIceConnectionChange(), and get sender when state comes to "CONNECTED".
Basically, what I am trying to do right now is use an android device as an A2DP receiver and when pairing established, android plays sound that is received from a transmitter. I am worrying that if I use STP profile, it may cause delay of streaming. So, I want to use A2DP but is this possible to use an android device as a receiver of A2DP? and how to do it?
Since Android L the BlueDriod stack does support A2DP sink, but it is disabled by default.
To enable it do the following:
/* Enable bluetooth av sink. */
#define BTA_AV_SINK_INCLUDED TRUE
in /external/bluetooth/bluedroid/include/bt_target.h.
This enables sink support in the bluetooth stack.
Also you have to do this change:
<!-- Enable sink support. -->
<bool name="profile_supported_a2dp_sink">true</bool>
in /packages/apps/Bluetooth/res/values/config.xml. This enables the particular UI.
Now you can pair your devices and start streaming. Unfortunately you will hear no sound although you'll receive the packets. The reason is that there is no audio route for A2DP sink. In the commit message of this patch https://android-review.googlesource.com/#/c/98161/ you can find a sample implementation on how to fix this.
Here is a list of these changes:
https://android-review.googlesource.com/#/c/97832/
https://android-review.googlesource.com/#/c/97853/
https://android-review.googlesource.com/#/c/97833/
https://android-review.googlesource.com/#/c/98130/
https://android-review.googlesource.com/#/c/98131/
Yes. It is possible. I have done it in JB.
Android internally uses "Bluedroid" stack from Broadcomm for Bluetooth. Previously this stack did not have support for A2DP Sink Role (Which you mentioned as receiver). From Lollipop release, the A2DP Sink role profile has been added in Bluedroid.
But, it is not enabled to be used by framework/upper layer (Application).
You need to make changes in framework to enable it or 'use' it.
You may refer to the following files and relevant files in Android source code to enable it.
audio.h - put a new audio source
audio_policy.conf - put a new input source for a2dp 'inputs'
AudioManager.java
AudioPolicyManagerBase.cpp
AudioService.java
AudioSystem.java
BluetoothA2dp.java
MediaRecorder.java
A2DPStateMachine.java
etc. and implement it (this file list is not comprehensive, but you can figure it out if you have experience in relevant field).
When any stream connection is established, you will get callback in a2dp state machine and from there you have to start a thread to read the decoded PCM bytes from the 'new' audio source and send it to your media player.
SBC codec to PCM decoding will be done at the 'bluedroid' sbc decoder layer.
Build it and flash it to your phone and enjoy music.
EDIT:
Also, you may have make changes in A2DP SDP record in Bluedroid stack to advertise the A2DP Sink role.
You may-not be able to do it manually between 2 phones because to stream one device needs to be A2DP sink and other other A2DP source, Phones are typically only Source devices (Source of the stream that can stream to sink devices) , Sinks are Headsets or Bluetooth speakers.
I have 2 Android phones and I have managed to convert one of them as Headset (Yes, I did root the phone for that).
When an incoming call is received to the phone, the headset-emulated phone is able to take headset related actions like - pick call, disconnect call, etc. However, only functionality that's missing is the transfer of Audio from Phone to headset-emulated-device.
Does anyone have prior experience in establishing SCO connection between 2 android phones and access voice data ?
(As of now, I am not concerned of Sound quality).
I came across A2DP, but it's only uni-directional. Only SCO is bidirectional voice data transfer.
Any help or pointers will be highly appreciated.
I have done this with reflection. It only worked on certain devices though. Not all. Although I didn't root the device.
Class cls = Class.forName("android.bluetooth.BluetoothDevice");
Method method = cls.getDeclaredMethod("createScoSocket", (Class[])null);
BluetoothSocket scoSocket = (BluetoothSocket)method.invoke(device, null);
scoSocket.connect();
Also there is the AudioManager.startBluetoothSco() and AudioManager.setBluetoothScoOn(true) methods that you have to use when playing your audio.
I want to create an Android application that is capable of receiving an audio stream. I thought of using the A2DP profile, but is seems as if Android doesn't support A2DP sink. Looks like there are a lot of people that's searching for a solution for this problem. But what about receiving an ordinary bit stream, and then convert the data into audio in the application? I was thinking of receiving an PCM or Mp3 data stream via the RFCOMM (SPP Bluetooth profile), and then play it using AudioTrack.
First, how do I receive a bit stream on my Android phone via the RFCOMM? And is it possible to receive a bit stream via RFCOMM as a PCM or Mp3 stream?
Second, if it isn't possible to receive a bit stream via RFCOMM as a PCM or Mp3 stream, how do I convert the received bit stream into audio?
Third, how do I convert the received data into audio AND play the audio simultaneously, in "real time"? Can I just use onDataReceived?
To be clear, I'm not interested of using the A2DP profile! I want to stream the data via the RFCOMM (SPP Bluetooth profile). The received data stream will be in PCM or Mp3. I thought of writing my own app, but if anyone knows of an app to solve this I'd be glad to hear about it! I'm using Android 2.3 Gingerbread.
/Johnny
No. Trying to write an Android application that handles this will not be the solution. At least if you want to use A2DP Sink role.
The fact is that Android, as you mentioned it, does not implement the API calls to BlueZ (the bluetooth stack Android uses till Jelly Bean 4.1) regarding A2DP sink capabilities. You have to implement them yourself. I will try to guide you, as I was also interested in doing this my self in the near past.
Your bluetooth-enabled Android device is advertising itself as an A2DP source device by default. You have to change this first, so nearby devices may recognize your device as a sink. To do this, you must modify the audio.conf file (usally located in /etc/bluetooth/) and make sure the Enable key exists and the value Source is attached to this key, so you will get something like :
Enable=Source
Reboot, nearby devices should now recognize your device as an A2DP sink.
Now you will have to interact with BlueZ to react appropriately when an A2DP source device will start to stream audio to your phone.
Android and BlueZ are talking to each other via D-BUS. In fact, Android connects to the DBUS_SYSTEM channel and listens to every BlueZ advertisement, such as events, file descriptors ...
I remember having successfully bound my self using a native application to this d-bus channel and got access to the various events BlueZ was posting. This is relatively easy to achieve using as reference, the BlueZ API available here. If you go this way, you will have to build a native application (C/C++) and compile it for your platform. You must be able to do this using the Android NDK.
If you find it difficult to use D-BUS, you can try this Java library I just found that handles the communication to D-BUS for you : http://jbluez.sourceforge.net/. I have never used it but it is worth a try in my opinion.
What you really have to do is find out when an A2DP source device is paired to your phone and when he starts to stream music. You can retrieve these events through D-BUS. Once somebody will try to stream music, you need to tell BlueZ that your native application is going to handle it. There is a pretty good document that explains the flow of events that you should handle to do this. This document is accessible here. The part you're interested in comes on page 7. The sink application in the given example is PulseAudio but it could be your application as well.
BlueZ will forward you a UNIX socket when you will call the org.bluez.MediaTransport.Acquire method. Reading on this socket will give you the data that are currently streamed by the remote device. But I remember having been told by a guy working on the BlueZ stack that the data read on this socket are not PCM pure audio, but encoded audio content instead. The data are generally encoded in a format called SBC (Low Complexity Subband Coding).
Decoding SBC is not very difficult, you can find a decoder right here.
The ultimate step would be to forward the PCM audio to your speakers.
To prevent you from getting stuck and in order to test your application in an easier manner, you can use the d-bus binary that should be available on your Android system. He is located in /system/bin.
Quick tests you can make before doing anything of the above might be :
Get Devices list :
dbus-send --system --dest=org.bluez --print-reply /
org.bluez.Manager.GetProperties
This returns an array of adapters with their paths. Once you have these path(s) you can retrieve the list of all the bluetooth devices paired with your adapter(s).
Get paired devices :
dbus-send --system --print-reply --dest=org.bluez
/org/bluez/{pid}/hci0 org.bluez.Adapter.GetProperties
This gives you the list of paired devices whithin the Devices array field.
Once you have the list of devices paired to your Bluetooth Adapter, you can know if it is connected to the AudioSource interface.
Get the devices connected to the AudioSource interface :
dbus-send --system --print-reply --dest=org.bluez
/org/bluez/{pid}/hci0/dev_XX_XX_XX_XX_XX_XX
org.bluez.AudioSource.GetProperties
org.bluez.Manager.GetProperties
Hope this helps.
Another work around is using HandsFreeProfile.
in Android, BluetoothHeadset is working on that.
Wait until status changed to BluetoothHeadset.STATE_AUDIO_CONNECTED.
then you can record audio from bluetooth headset.
mMediaRecorder = new MediaRecorder();
mMediaRecorder.setAudioSource(MediaRecorder.AudioSource.MIC);
mMediaRecorder.setOutputFormat(MediaRecorder.OutputFormat.THREE_GPP);
mMediaRecorder.setOutputFile(mFilename);
mMediaRecorder.setAudioEncoder(MediaRecorder.AudioEncoder.AMR_NB);
try {
mMediaRecorder.prepare();
} catch (IllegalStateException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
mMediaRecorder.start();
[Irrelevant but works] This hack serves only mp3 streaming via WIFI hotspot (I use it in my car which has only AUX input):
Install the app AirSong,
Turn on wifi hotspot,
Connect the other device to that hotspot,
Access 192.168.43.1:8088 from the device's browser and you are on.
(wondering why "192.168.43.1" only? because thats the default gateway of any device connected to Android Hotspot)
audio.conf seems to be missing in Android 4.2.2?
To receive pcm audio stream via rfcomm , you can use code flow as a hint explained (Reading Audio file in C and forwarding over bluetooth to play in Android Audio track) , with a change . change freq used while initializing from 44100 to 22050
AudioTrack track = new AudioTrack(AudioManager.STREAM_MUSIC,22050,AudioFormat.CHANNEL_OUT_MONO,AudioFormat.ENCODING_PCM_8BIT,10000, AudioTrack.MODE_STREAM);
note:This streaming still consists some noise but your
"receiving an PCM data stream via the RFCOMM (SPP Bluetooth profile), and then play it using AudioTrack."
will work.
I have a Samsung vibrant and I am connecting to to my car using bluetooth. In the samsung music app there is a button to route the audio to via bluetooth or via phone.
Anyone know how there were able create this functionality. I looked at the sdk and I see
ROUTE_BLUETOOTH_A2DP
This constant is deprecated. Do not
set audio routing directly, use
setSpeakerphoneOn(),
setBluetoothScoOn() methods instead.
Routing audio output to bluetooth A2DP
Constant Value: 16 (0x00000010)
but as you can see it is listed as "deprecated", i see the option for setBluetoothScoOn, but not an equivalent to for setting a2dp on.
My end goal would be to create a widget that allows me to turn on and off outing to the a2dp. So I can turn it on when I want to stream music and turn it off when I want to use navigator, but listen to music or the radio at the same time.
Here's what you are looking for: (not sure if this was available at the time of your question...)
setBluetoothA2dpOn();
But it's also deprecated.
My guess would be to use this instead:
audioManager.startBluetoothSco();
audioManager.setBluetoothScoOn(true);
And to stop routing:
audioManager.setBluetoothScoOn(false);
audioManager.stopBluetoothSco();
audioManager is a instance of the AudioManager.
Here's a reference to AudioManager: AudioManager
Hope this helps, cheers