I'm just starting to learn android programming.
I downloaded the ADT and went through the manual for the hello world! project.
But when I want to run my project I see this in console:
[2013-01-12 19:34:20 - HelloWorld] ------------------------------
[2013-01-12 19:34:20 - HelloWorld] Android Launch!
[2013-01-12 19:34:20 - HelloWorld] adb is running normally.
[2013-01-12 19:34:20 - HelloWorld] Performing com.example.helloworld.MainActivity activity launch
[2013-01-12 19:34:20 - HelloWorld] Automatic Target Mode: Preferred AVD 'Nexus7' is not available. Launching new emulator.
[2013-01-12 19:34:20 - HelloWorld] Launching a new emulator with Virtual Device 'Nexus7'
[2013-01-12 19:34:20 - Emulator] emulator: ERROR: No initial system image for this configuration!
I'm using MAC OSX
Tell me if more information is needed!
Thanks!
Among the SDKs installed, your PC seems to be missing the system image required for the AVD to start.
Go to the SDK manager and check if the components have been downloaded properly or not.
For further details, check here.
Related
I want to execute a HelloWorld project with Android using eclipse Juno, but when I run the project I always obtain this result:
[2014-10-28 18:37:07 - HelloWorld] ------------------------------
[2014-10-28 18:37:07 - HelloWorld] Android Launch!
[2014-10-28 18:37:07 - HelloWorld] adb is running normally.
[2014-10-28 18:37:07 - HelloWorld] Performing com.javacodegeeks.android.helloword.MainActivity activity launch
[2014-10-28 18:37:08 - HelloWorld] Failed to find an AVD compatible with target 'Android 2.1'.
[2014-10-28 18:37:13 - HelloWorld] Still no compatible AVDs with target 'Android 2.1': Aborting launch.
[2014-10-28 18:37:13 - HelloWorld] Performing com.javacodegeeks.android.helloword.MainActivity activity launch
[2014-10-28 18:37:16 - HelloWorld] Launch canceled!$
it was a problem with the project, it asks at minimum an emulator with API 15 at least whiel i was using Android 2.1 API7
I am beginner in Android and want to create AVD but it is not getting launch and giving some error.
Error Trace:
[2014-03-21 17:47:58 - HelloWorld] Android Launch! [2014-03-21 17:47:58 - HelloWorld] adb is running normally.
[2014-03-21 17:47:58 - HelloWorld] Performing in.example.HelloWorld.MainActivity activity launch
[2014-03-21 17:47:58 - HelloWorld] Automatic Target Mode: Unable to detect device compatibility. Please select a target device.
[2014-03-21 17:48:01 - HelloWorld] Launching a new emulator with Virtual Device 'Android'
[2014-03-21 17:48:01 - Emulator] PANIC: Could not open: Android
I think you should do some research over google before putting questions here
There are some links that might solve your problem please check them out:
how to create a new AVD in eclipse?
As per your error trace: PANIC: Could not open: Android This link may help you:
"Starting emulator for AVD" then Panic: could not open..."
This should be a really simple one. I am doing the Hello Android tutorial and I was able to get my app to install into the emulator. However, when I go to run again (with no changes) the eclipse environment insists on launching a new emulator instead of connecting to the existing one. How do I fix that? My development environment is a Mac Mini running Mac OS 10.6.8.
Thanks.
New Update:
I have found the answer:
First I read this [question linked above by Mangusto][1]
Use same android emulator everytime
Then I realized that what one really needs to do, if the emulator is opening and initializing slowly, is to start the emulator, wait for it to initialize, and then attach to it the manual way described in the link above. Automatic does not work if your emulator is starting slowly as it disconnects as I described in the update below.
Thanks for the responses.
Update:
Below is the print out from eclipse (I tried to link image but could not due to my user level. I need reputation level of 10 or more). I had already tried the suggestion below about automatic vs manual. I think the issue is that while the apk file was installed it did not automatically launch in the emulator. Therefore, eclipse disconnected from the emulator. I was able to see my application by navigating to the apps within the android emulator.
[2011-11-24 08:25:34 - SDK Manager] Created AVD 'myAvd' based on Android 4.0, ARM (armeabi-v7a) processor,
[2011-11-24 08:25:34 - SDK Manager] with the following hardware config:
[2011-11-24 08:25:34 - SDK Manager] hw.lcd.density=240v
[2011-11-24 08:25:34 - SDK Manager] vm.heapSize=24
[2011-11-24 08:25:34 - SDK Manager] hw.ramSize=512
[2011-11-24 08:29:17 - HelloAndroid] ------------------------------
[2011-11-24 08:29:17 - HelloAndroid] Android Launch!
[2011-11-24 08:29:17 - HelloAndroid] adb is running normally.
[2011-11-24 08:29:17 - HelloAndroid] Performing com.example.helloandroid.HelloAndroid activity launch
[2011-11-24 08:29:17 - HelloAndroid] Automatic Target Mode: launching new emulator with compatible AVD 'myAvd'
[2011-11-24 08:29:17 - HelloAndroid] Launching a new emulator with Virtual Device 'myAvd'
[2011-11-24 08:29:25 - Emulator] 2011-11-24 08:29:25.377 emulator-arm[984:80b] Warning once: This application, or a library it uses, is using NSQuickDrawView, which has been deprecated. Apps should cease use of QuickDraw and move to Quartz.
[2011-11-24 08:29:25 - HelloAndroid] New emulator found: emulator-5554
[2011-11-24 08:29:25 - HelloAndroid] Waiting for HOME ('android.process.acore') to be launched...
[2011-11-24 08:31:29 - HelloAndroid] HOME is up on device 'emulator-5554'
[2011-11-24 08:31:29 - HelloAndroid] Uploading HelloAndroid.apk onto device 'emulator-5554'
[2011-11-24 08:31:29 - HelloAndroid] Installing HelloAndroid.apk...
[2011-11-24 08:33:36 - HelloAndroid] Failed to install HelloAndroid.apk on device 'emulator-5554!
[2011-11-24 08:33:36 - HelloAndroid] (null)
[2011-11-24 08:33:36 - HelloAndroid] Failed to install HelloAndroid.apk on device 'emulator-5554': Connection reset by peer
[2011-11-24 08:33:36 - HelloAndroid] com.android.ddmlib.InstallException: Connection reset by peer
[2011-11-24 08:33:36 - HelloAndroid] Launch canceled!
[2011-11-24 08:34:55 - HelloAndroid] ------------------------------
[2011-11-24 08:34:55 - HelloAndroid] Android Launch!
[2011-11-24 08:34:55 - HelloAndroid] adb is running normally.
[2011-11-24 08:34:55 - HelloAndroid] Performing com.example.helloandroid.HelloAndroid activity launch
[2011-11-24 08:34:55 - HelloAndroid] Automatic Target Mode: launching new emulator with compatible AVD 'myAvd'
[2011-11-24 08:34:55 - HelloAndroid] Launching a new emulator with Virtual Device 'myAvd'
[2011-11-24 08:35:03 - Emulator] WARNING: Data partition already in use. Changes will not persist!
[2011-11-24 08:35:05 - Emulator] WARNING: Cache partition already in use. Changes will not persist!
[2011-11-24 08:35:06 - Emulator] 2011-11-24 08:35:06.756 emulator-arm[1004:80b] Warning once: This application, or a library it uses, is using NSQuickDrawView, which has been deprecated. Apps should cease use of QuickDraw and move to Quartz.
[2011-11-24 08:35:06 - HelloAndroid] New emulator found: emulator-5556
[2011-11-24 08:35:06 - HelloAndroid] Waiting for HOME ('android.process.acore') to be launched...
[2011-11-24 08:35:11 - HelloAndroid] emulator-5556 disconnected! Cancelling 'com.example.helloandroid.HelloAndroid activity launch'!
[2011-11-24 08:42:36 - HelloAndroid] ------------------------------
[2011-11-24 08:42:36 - HelloAndroid] Android Launch!
[2011-11-24 08:42:36 - HelloAndroid] adb is running normally.
[2011-11-24 08:42:36 - HelloAndroid] Performing com.example.helloandroid.HelloAndroid activity launch
[2011-11-24 08:42:36 - HelloAndroid] Automatic Target Mode: Preferred AVD 'myAvd' is not available. Launching new emulator.
[2011-11-24 08:42:36 - HelloAndroid] Launching a new emulator with Virtual Device 'myAvd'
Its because your application Target mode has set to manual. To solve :
Right Click on your project-> Run as -> Select Run Configurations ->
In that select Target Tab ->Select Automatic instead of manual
Click on Apply and run.
Now your app doesn't prompt for a device.
For a reverse case Select Manual.
Hope it helps.
Go to DDMS Perspective and if you can't see any emulator device on the list, Find the "View menu" dropdown on the "Devices" window on the left, and click Reset ADB.
After adb restarted it should be able to show all of your devices again.
Me also had the same problem.First of all clean your project.Take the DDMS mode in the eclipse .Here you are able to handle the devices in the emulator.There you can see the emulator control.From there select your device and run it.Hope it will solve your problem.
I had BlueStacks android app player installed. Its an application that runs on mac and pc allowing you to emulate android. Looks like it uses the android emulator under the covers. To uninstall on mac, go to Library>bluestacksplayer and uninstall app ... .solved the emulator 5554 problem.
I am new to android. I am trying to develop android helloworld application as given in all tutorials.
Using Configuration: Android 3.1 for configuration.
When i try to run in eclipse i get error:
[2011-07-10 13:39:19 - HelloWorld] -----------------------------
[2011-07-10 13:39:19 - HelloWorld] Android Launch!
[2011-07-10 13:39:19 - HelloWorld] adb is running normally.
[2011-07-10 13:39:19 - HelloWorld] Performing com.hello.HelloWorldActivity activity launch
[2011-07-10 13:39:19 - HelloWorld] Automatic Target Mode: launching new emulator with compatible AVD 'my_avd'
[2011-07-10 13:39:19 - HelloWorld] Launching a new emulator with Virtual Device 'my_avd'
[2011-07-10 13:39:19 - Emulator] invalid command-line parameter: Files\Android\android-sdk\tools/emulator-arm.exe.
[2011-07-10 13:39:19 - Emulator] Hint: use '#foo' to launch a virtual device named 'foo'.
[2011-07-10 13:39:19 - Emulator] please use -help for more information
This is a bug that was introduced with SDK tools r12. You can do either of two things:
Install your SDK into your C:\ root directory instead of C:\Program Files
In Eclipse, go to Window -> Preferences -> Android. If you placed your SDK in C:\Program Files, change that to C:\PROGRA~1. If you placed it in C:\Program Files (x86), change it to C:\PROGRA~2. Eclipse is going to complain, so in your command line terminal, run adb kill-server and then adb start-server. If you haven't set up your PATH variable yet, then, in the command prompt, navigate to (path to sdk)\android-sdk-windows\platform-tools, and run those two commands from there.
Your android sdk might not be configured correctly.
Did you try to run the emulator from command line?
[http://www.ceveni.com/2009/12/run-android-emulator-from-command-line.html][1]
Running Eclipse 3.5.2 (Classic) in OS X 10.6.7 with the ADT plugin. I have the SDK installed and have run the SDK and AVD Manager to install all available platforms and tools. I have an AVD setup with Android 2.2 as the target API, and have configured the example 'Hello, Android' app for Android 2.1 Update 1, so compatibility should not be an issue. When I Run the application, it starts up the emulator, but gives me an error before the android startup animation appears. Here is the output in the Console window of Eclipse:
[2011-04-10 06:45:40 - HelloAndroid] ------------------------------
[2011-04-10 06:45:40 - HelloAndroid] Android Launch!
[2011-04-10 06:45:40 - HelloAndroid] adb is running normally.
[2011-04-10 06:45:40 - HelloAndroid] Performing com.twopoint7.testing.HelloAndroid activity launch
[2011-04-10 06:45:40 - HelloAndroid] Automatic Target Mode: launching new emulator with compatible AVD 'testDroid'
[2011-04-10 06:45:40 - HelloAndroid] Launching a new emulator with Virtual Device 'testDroid'
[2011-04-10 06:46:04 - Emulator] 2011-04-10 06:46:04.613 emulator[997:903] Warning once: This application, or a library it uses, is using NSQuickDrawView, which has been deprecated. Apps should cease use of QuickDraw and move to Quartz.
[2011-04-10 06:46:04 - HelloAndroid] New emulator found: emulator-5554
[2011-04-10 06:46:04 - HelloAndroid] Waiting for HOME ('android.process.acore') to be launched...
[2011-04-10 06:47:22 - HelloAndroid] emulator-5554 disconnected! Cancelling 'com.twopoint7.testing.HelloAndroid activity launch'!
Any advice on what might be going wrong would be greatly appreciated. I've found lots of posts (here and on other forums) that seem to indicate the NSQuickDrawView vs. Quartz warning seems to be a problem across the board but doesn't have a solution yet. I'm more concerned with the "emulator-5554 disconnected..." bit and the fact that I can't seem to run any apps in the emulator. Any other info I can provide which would be helpful? Any insight?
Thanks in advance for your time!
I guess you need to reset your adb after launch the emulator. In eclipse, go to window -> show view -> other -> device(under android folder).
In the device view, find and reset adb. Then run your apps.