I have a problem, I'm developing an app and when I run it via eclipse I can run it on my phone.
But when I export it as a unsigned apk, I get following message at the end of the intallation:
App not installed
the problem is that I dont get any further informations about what is wrong.
How can I find out where the problem is?
You cannot run an unsigned apk on Android. You have to sign it first, either directly in Eclipse or with keytool (command line).
Even when running the app from Eclipse, it is signed - with a generated debug key.
You may have being installing older version on top of newer version.
In this case, you will find the following log.
W/PackageManager(404): Can't install update some.package.name of update version 1 is older than installed version 2
Try removing other/older app versions like prod/sandbox.
Related
I tried to reinstall an apk
$adb install -r new.apk
And it shows the error:
Failure [INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES]
One solution is to uninstall and install the new.apk, that works fine.
But I'm wondering whether I could re-build an apk and re-install without the uninstallation. Eg. change some config in the AndroidManifest.xml, or not sign the APK, etc.
It would be great appreciated if you could tell me the whole meaning of the "INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES".
It means the new copy of your application (on your development machine) was signed with a different signing key than the old copy of your application (installed on the device/emulator). For example, if this is a device, you might have put the old copy on from a different development machine (e.g., some other developer's machine). Or, the old one is signed with your production key and the new one is signed with your debug key.
I ran into this while testing on a new Xoom. I had previously installed my app from the Marketplace. Later while trying to test a new version of the app I ran into this error.
I fixed it by removing the app that was installed via Marketplace (just hold and drag to the trash). Thereafter I was able to deploy my development version without any issue.
This happened to me when another developer on the team built our app on the hardware device I was trying to deploy to. Uninstalling the app from hardware fixed my problem.
This is the command to uninstall the app from device using adb:
adb uninstall <package name>
I got this error even after uninstalling the original APK, which was mystifying. Finally I realized that I had set up multiple users on my Nexus 7 for testing and that the app was still installed for one of the other users. Once I uninstalled it for all users the error went away.
I changed the package name while coding an update so that I could debug it on my device via Eclipse, without deleting the old version that was installed. Without reverting the package name I was using when trying to reinstall, I got this same error. Using the same package name the reinstall was successful.
Just delete the old build from the device and reinstall the same. Because device.keystore is already exist in the device so just uninstall the build and reinstall the APK thats all..
Thanks
I faced an another use case where I got the similar error.
When At first I got the error, I panicked, and removed /data/data/{package.name}
After that I tried, and my problem was still present.
Then I tried uninstall, it failed.
I then removed the apk file present in /system/app (required root access), and tried uninstall and it was successfull.
After that I tried re-installing the apk, it worked.
If you encounter a failed deployment to an Andorid device or emulator with the error "Failure [INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES]" in the Output Window, simply delete the existing app on the device or emulator and redeploy. Debug builds will use a debug certificate while Release builds will use your configured certificate. This error is simply letting you know that the certificate of the app installed on the device is different than the one you are attempting to install. In non-development (app store) scenarios, this can be indicator of a corrupted or otherwise modified app not safe to install on the device.
I had the same problem until I realised I had the simulator running and adb was trying to install on that
For what it is worth, I ran into this problem after adding a new plugin to my Cordova project. I had been having cordova do builds and install directly on the device via USB.
I fixed it by uninstalling the app from the device and on the next deploy there were no problems.
Nothing from above worked for me. The problem for me was that I had wrong source in my Java Build Path for android-support-v7-appcompat. When you go to Project> Build Path> Configure Build Path>. Under the Source tab make sure you have android-support-v7-appcompat/gen , android-support-v7-appcompat/libs and android-support-v7-appcompat/src and nothing else. Click OK and it should work.
I've had the same error today, but the problem wasn’t exactly the same. I’m using ADB with Android installed in VirtualBox. I tried to install different versions of my app (signed / not signed, debug / release mode) and got two errors alternatively : INSTALL_FAILED_UID_CHANGED and INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES.
Now, when looking at /data/data/{package.name}, I found a bunch of files that were still there after uninstalling the app. I tried to rm -rf them without success : I got I/O errors.
The solution to this was :
Shut down the VM
Mount the VDI image with vdfuse (read/write)
Repair the Partition1 image file with e2fsck
Umount and restart the VM
Since the verification is based on package's name, you can change the package name inside your config.xml or manifest file for another name you want.
When publishing your app don't forget to change back the name!
I had this problem trying to execute gradle task connectedDebugAndoidTest (or connectedAndroidTest) on Genymotion. Running it on normal emulator solved the problem.
I think , your app installed by other account.( multiple account mode feature ) You can uninstall app in Setting>Apps>"app name"> Uninstall
Have these erro when i'm trying to build the apk to some devices. Have no idea whats going on.
I get that when i build and install apk on device at the first time.
Someone have some tips for that?
[[EDIT]]
Well, after creating a debug key on keystore, i can build and deploy the apk via ADP to the device. But, dont know why, the error just return...
And now, we have other error:
UPDATE:
I Fix that issue removing all Android SDK and Android Studio and ReInstall it.
The problem can be solved by addding the install flags -r -t in the Run/Debug Configuration Dialog like it's showed in the given image
You can find Run/Debug Configuration Dialog location here according to Jetbrains.
UPDATE: Depending on the Android Studio version the Run/Debug Configuration position in the IDE can be slightly different, but always refer Jetbrains to find whatever you are looking for
When you've installed an APK from another source, Android Studio warns you before overwriting.
For example, if I've developed an application, uploaded it onto the Google Play Store, downloaded it, then try to re-deploy that same application from Android Studio, I'll get this warning.
It's trying to tell you that the way the package is signed is different; it's warning you that another app might be masquerading as the original.
The reason is you are trying to install the application with the same package name.
If you have already downloaded the same application from the play store /app market, then simply uninstall that application and RE-RUN.
This error can also occur if you recently switched branch which had different build variants declared in build.gradle file and you didn't perform gradle sync.
For example you had release and debug and then you switched to branch which has releas, deubg and staging variants; your project will still build but while installing apk this error can pop up.
I have an developed an android app with minimum API level 9 and Maximum 4.4 Kitkat. When i intent to export the app i tried both of the options provided in Eclipse ADT bundle.I tried the unsigned export it compiled and gave a APK file. I copied the APK file to the SD card and tried to install on my device it said application did not installed..I can't figure out the problem?
Most probably it is caused by different signatures. Try installing it from console, so you can see deatiled error message.
Un-install your app from your phone first, then try.
You cannot install the built app (APK) if you have the debug (Eclipse) version on your phone.
The package names etc conflict, while it thinks the apps are different, due to the test/release signatures so will not let you install it again.
I made a android application on my pc. I kept the build sdk at 4.1, and minimum sdk version at 2.2
The app ran fine on the emulator but when i tried it on my friends Samsung Note it after installing gave an error "Application Not installed". I did so on Google Nexux 7.
I exported the app as a unsigned apk
I tried a simple hello world ap but had the same problem. Please help what to do and how to correct the error.
you need to sign the app to make it run on a real device.. simple choose export as a signed apk and sign it with a keystore...if you don't have one you can make a new keystore through same wizard that you get at the time of exporting
I tried to reinstall an apk
$adb install -r new.apk
And it shows the error:
Failure [INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES]
One solution is to uninstall and install the new.apk, that works fine.
But I'm wondering whether I could re-build an apk and re-install without the uninstallation. Eg. change some config in the AndroidManifest.xml, or not sign the APK, etc.
It would be great appreciated if you could tell me the whole meaning of the "INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES".
It means the new copy of your application (on your development machine) was signed with a different signing key than the old copy of your application (installed on the device/emulator). For example, if this is a device, you might have put the old copy on from a different development machine (e.g., some other developer's machine). Or, the old one is signed with your production key and the new one is signed with your debug key.
I ran into this while testing on a new Xoom. I had previously installed my app from the Marketplace. Later while trying to test a new version of the app I ran into this error.
I fixed it by removing the app that was installed via Marketplace (just hold and drag to the trash). Thereafter I was able to deploy my development version without any issue.
This happened to me when another developer on the team built our app on the hardware device I was trying to deploy to. Uninstalling the app from hardware fixed my problem.
This is the command to uninstall the app from device using adb:
adb uninstall <package name>
I got this error even after uninstalling the original APK, which was mystifying. Finally I realized that I had set up multiple users on my Nexus 7 for testing and that the app was still installed for one of the other users. Once I uninstalled it for all users the error went away.
I changed the package name while coding an update so that I could debug it on my device via Eclipse, without deleting the old version that was installed. Without reverting the package name I was using when trying to reinstall, I got this same error. Using the same package name the reinstall was successful.
Just delete the old build from the device and reinstall the same. Because device.keystore is already exist in the device so just uninstall the build and reinstall the APK thats all..
Thanks
I faced an another use case where I got the similar error.
When At first I got the error, I panicked, and removed /data/data/{package.name}
After that I tried, and my problem was still present.
Then I tried uninstall, it failed.
I then removed the apk file present in /system/app (required root access), and tried uninstall and it was successfull.
After that I tried re-installing the apk, it worked.
If you encounter a failed deployment to an Andorid device or emulator with the error "Failure [INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES]" in the Output Window, simply delete the existing app on the device or emulator and redeploy. Debug builds will use a debug certificate while Release builds will use your configured certificate. This error is simply letting you know that the certificate of the app installed on the device is different than the one you are attempting to install. In non-development (app store) scenarios, this can be indicator of a corrupted or otherwise modified app not safe to install on the device.
I had the same problem until I realised I had the simulator running and adb was trying to install on that
For what it is worth, I ran into this problem after adding a new plugin to my Cordova project. I had been having cordova do builds and install directly on the device via USB.
I fixed it by uninstalling the app from the device and on the next deploy there were no problems.
Nothing from above worked for me. The problem for me was that I had wrong source in my Java Build Path for android-support-v7-appcompat. When you go to Project> Build Path> Configure Build Path>. Under the Source tab make sure you have android-support-v7-appcompat/gen , android-support-v7-appcompat/libs and android-support-v7-appcompat/src and nothing else. Click OK and it should work.
I've had the same error today, but the problem wasn’t exactly the same. I’m using ADB with Android installed in VirtualBox. I tried to install different versions of my app (signed / not signed, debug / release mode) and got two errors alternatively : INSTALL_FAILED_UID_CHANGED and INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES.
Now, when looking at /data/data/{package.name}, I found a bunch of files that were still there after uninstalling the app. I tried to rm -rf them without success : I got I/O errors.
The solution to this was :
Shut down the VM
Mount the VDI image with vdfuse (read/write)
Repair the Partition1 image file with e2fsck
Umount and restart the VM
Since the verification is based on package's name, you can change the package name inside your config.xml or manifest file for another name you want.
When publishing your app don't forget to change back the name!
I had this problem trying to execute gradle task connectedDebugAndoidTest (or connectedAndroidTest) on Genymotion. Running it on normal emulator solved the problem.
I think , your app installed by other account.( multiple account mode feature ) You can uninstall app in Setting>Apps>"app name"> Uninstall