Until yesterday everything was working perfect until today that I connected my phone (just updated to Jelly Bean) and adb.exe stop working. If I execute adb.exe I can see the help but when I want to use any command it just run forever and no message is shown.
I tried with "kill-server" and "devices" and it runs forever, no message at all is displayed and I must terminate the process to close it.
I just connect the same phone to other PC that was fully functional and also adb.exe stop working. The strange thing is that adb.exe will not work any more even If I disconnect the phone and/or I connect my tablet. Adb.exe just got useless.
I was using the same phone yesterday (android 4.0), with my tablet (android 4.2) and adb.exe was working.
Adb.exe is not corrupted as I checked it MD5 and it is the same as in working pc (5787e5df1a68e7afea82d58e5f0d6549 *adb.exe).
I have Android Debug Bridge version 1.0.31 and Android SDK tools 22. I uninstalled android sdk tools and Installed again but when is near to finish it hangs because it launches adb.exe and again it will run forever.
Please any suggestion or help?
Try rebooting. Sometimes the USB drivers lock up. I work HEAVILY with ADB in my project at http://android-casual.googlecode.com and I find it to be one of three things when ADB locks up.. 1. USB drivers, or 2. adb_usb.ini needs an update, or 3. on new devices you have to "pair" them so that ADB can perform any action.
To pair, you can disconnect, reconnect and run "adb devies" to display the pairing on the device.
Not sure if you're still facing this issue, but for what it's worth I had the same kind of issue with adb.exe, and came across this post while trying to troubleshoot it. In my case, I wasn't using any physical Android devices, only the Emulator. Everything had been working fine and then suddenly adb.exe would no longer respond (couldn't get any output from any adb command - it just appeared to hang).
In the end, my issue turned out to be another application I had installed on my development machine. It was starting as a service, and was listening on the exact same port that the adb server runs on (5037), which appeared to be confusing it. Once I changed the application to use a different port, adb started working again and everything was fine.
Run command
where adb
I had such kind of situation.
In my case
where adb
gave output
C:\Windows\adb.exe
D:\AndroidSDK\adt-bundle-windows-x86_64-20131030\sdk\platform-tools\adb.exe
I tried to run adb from disk C, when Eclipse used second adb from AndroidSDK (from disk D).
I removed adb from strange path C:\Windows\adb.exe, and this solved this problem.
I got the same problem,my solution is going to cmd and paste adb.exe path,and then click enter button.For example
D:\Android\Android\platform-tools\adb.exe
Related
I read many posts to fix this problem. None worked for me.
Error:
Target device: lenovo-lenovo_a6000-89a70dc9
Installing APK: C:\Users\Nikhil\AndroidStudioProjects\ProfitKey\app\build\outputs\apk\app-debug.apk
Uploading file to: /data/local/tmp/helix.profitkey.hotelapp
java.io.IOException: An existing connection was forcibly closed by the remote host
I tried below
Kill and start adb
Invalidate and restart android studio
Removed adb process in the taskbar
Restarted the device and pc
Restarted studio, clean and rebuild
Taskbar have only one adb.exe
Updated the driver from device manager
Another device it is working. But previously both device worked fine for me.
Target device: motorola-xt1022-ZX1B33PRVP
Installing APK: C:\Users\Nikhil\AndroidStudioProjects\ProfitKey\app\build\outputs\apk\app-debug.apk
Uploading file to: /data/local/tmp/helix.profitkey.hotelapp
Installing helix.profitkey.hotelapp
DEVICE SHELL COMMAND: pm install -r "/data/local/tmp/helix.profitkey.hotelapp"
pkg: /data/local/tmp/helix.profitkey.hotelapp
Success
Edited:
I tried with two lenovo A6000. One is working and another is not working. Then, Moto is working and samsung galaxy is not working. Whenever I am killing and starting the adb. The task manager creating two adb first and after few seconds one was hiding. Was this a problem? But still some devices working fine.
adb starts automatically after killing by command or from the task manager if android studio is opened.
Now working for all the devices. Just I uninstalled the driver of mobile in PC and changed the port to connect with that device. I think some problem with the port in my PC. After long research it fixed by a small thing. It might be helpful to someone.
I also faced same problem,this was a just port problem,I was using computer front USB port ,just use computer back USB port and problem solved.
Restarting adb.exe worked for me. (For windows, Just Go to taskManager and kills the adb.exe process and re-deploy)
I also faced same problem, just change computer USB port and problem solved. or use genymotion emulator
I closed my virtual devices, opened windows task manager, and killed all adb.exe tasks -- there was one constant one and another that would appear then disappear. Aftwerwards, i started my virtual device and everything worked again.
Make sure that no other program is trying to take control of the ADB. You can check this by opening task manager, right clicking on any of the adb.exe, and opening the file location. Turns out that my HTC sync manager had it's own ADB and wanted to run it all the time. I uninstalled the program and haven't had issues since.
In my case, I had to change the USB debugging cable.
I have a strange problem where everytime I run adb from command line (devices command or pull, or uninstall etc), the device goes offline but if I now go into DDMS in eclipse and reset ADB, it comes back online. If I am running the game from within eclipse, it runs (by which I mean my Eclipse DDMS is able to use adb just fine) but from command line, doing anything adb-related brings the device offline and the only way to bring it back online is adb reset from DDMS inside eclipse. Effectively, I cannot do anything adb-related through command line.
I have tried solutions like switch the debug option of device on and off, adb-kill-server and then start-server, android 51 rules file, and more weirder solutions like change cable, change port etc. Many of those bring the device online, but whenever I run a adb command from the terminal, poof! device is back offline.
I have been facing this for over a month now and I have done all research I could, on google and on stackoverflow but nothing have I found which could address this specific issue.
Any help is appreciated. Thanks.
The problem is that you are having two version of adb in your computer.
Remove adb.exe,AdbWinApi.dll and AdbWinUsbApi from C:/Windows and everything will be fine.
A few days ago I started having troubles while trying to install a .apk on my Galaxy S2. I select my phone as the target, click OK and in the Console get the following error:
Failed to install AvatarRun.apk on device 'device number': timeout
Launch canceled!
Without changing anything in code and running again I can also get the error:
Failed to install AvatarRun.apk on device 'device number': device not
found com.android.ddmlib.InstallException: device not found Launch
canceled!
I have tried opening a command window and navigating to android-sdk\platform-tools and running:
adb kill-server adb start-server
This did not fix the issue.
This seems to just be a coincidence, but after failing many times I changed the minimum SDK in the Manifest from 10 to 7 and the .apk loaded on the next try, but has worked intermitently since and generates the same errors.
Can anyone suggest a method for finding what is causing this error?
After trying the fixes mentioned above, I ended up installing and reinstalling the Galaxy drivers. This didn't help. What eventually worked (so far) was to switch which USB port the Galaxy is plugged into. Once I did this everything was functioning as it should.
It may sound ridiculous, I tried all the ways suggested in Android error: Failed to install *.apk on device *: timeout
None of them works for me except unplugging the current cable and change for a new one.
There are various solutions:
Try changing the ADB connection timeout. The default is 5000; you should change it to 10000ms or so.
Window -> Preferences -> Android -> DDMS -> ADB Connection Timeout (ms)
Try to unplug and re-plug the cable. It seems that sometimes Eclipse loses the connection with Device. Sometimes you just need to plug into other USB port.
You might need to kill the ADB process and restart it.
adb kill-server and then
adb start-server
For me, the solution is to uninstall the old apk from the phone.
This problem often shows up if the computer is not fast enough. So,if you go to task manager you will see the performance. If you are watching video or running other programs at the same time while you are running your android application close other programs; at least during installing the app on device or emulator. You might even need to close internet browser.
You might need to update your computer to make it faster if you can.
Hope this helps someone:)
I have been facing this problem for quite sometime now. Running 'adb devices' shows me an additional dummy device although its named as emulator-5554. FYI, I don't have any emulator running as well.
adb devices
List of devices attached:
xxxxxxx device (Actual device)
emulator-5554 device (Dummy thingy shown as device).
How do I clean up this mess?
Same problem for me but I don't see any Bluestacks service in my services list. after
adb devices shows emulators I didn't have, I usually just type the command
adb kill-server
and running the
adb devices
once more shows only the devices that are connected.
I had the same issue. I did this and now everything is ok
click Windows+R
type services.msc
stop BlueStacks Android Service
I have figured out the issue. I had installed Bluestacks for Mac for trying out Android apps on Mac. This was running an emulator with a different name.
Figured it out by taking a screenshot of the emulator and it showed the launch screen of Bluestacks. Uninstalled Bluestacks and all is well now.
the adb server is scanning for emulators on all even local ports from 5555 to 5555+128 (5683). If you have a custom service which use one of these ports... You are stuck with the "adb -d command" requirement
pls check in task manager whether emulator-arm.exe is running. If so, try stopping both adb.exe and emulator-arm.exe
I had the same problem and non of these answers helped. So I figured out that my system didn't shut down properly and that's the reason I have a dummy emulator-5554. The solution was to create a new emulator with a name then launch it? While it's launching kill the server using cmd until when the emulator powers on and you can see its name under Devices in DDMS. After this shut the emulator...emulator-5554 is gone, Now you can start Bluestacks and connect
I was facing the same issue, and that due to BlueStacks too. In case you have Windows and you don't want to remove it, then you can stop its service "BlueStacks Android Service."
To do that click Windows+R, type services.msc then stop "BlueStacks Android Service"
Reference:
http://forum.xda-developers.com/showthread.php?t=2612389
Eclipse emulator NOT BlueStacks:
In the case of the eclipse emulator running in the background and you don't know how to close it, just go to devices tab and choose the dropdown menu on the right, then Reset adb. OR, just reset the adb using adb console.
Just open task manager and end task bluestacks
I also meet the same problem.Here is my answer to solve this problem.
in Windows system.
1.in cmd terminal,usr cmd netstat -aon|findstr "5555"
2.use cmd tasklist|find "PID",the PID para should be a process number which is the result of the first step .
3.changed the Port No. to other ,which should not be "5555"
That's done.
After trying:
adb kill-server
stopping adb.exe in task manager
adb usb
and a few other stuff I can't even remember. . .
I restarted my computer and the dummy-device was gone!
ADB when run stand-alone works fine. I can connect to my device (HTC Desire) and perform .apk installs etc, so I know the USB drivers are working correctly. A common reason for this question, I know, but that can be ruled out.
Occasionally I can connect to the phone, very occasionally. 99% of the time I just get the standard windows popup "adb.exe has stopped working".
I've updated Eclipse to the latest version.
I'm sure the USB drivers are working correctly
I can connect via adb in command line mode with no issues.
I've searched for a solution until google begged me to stop :)
Seems like a DDMS Eclipse issue.
Any ideas ?
Actually, just before I sent this I had a brainwave.
Without Eclipse running I ran adb.exe from command line and performed an install -r of my .apk package.
All worked fine.
I then started Eclipse - the connection to my phone worked fine...
Nope, Eclipse now failing again. BUT with eclipse trying to connect (and failing) I can simultaneously run adb from command line and install the package. It's got to be Eclipse
If you have an alternate "launcher" or "home-screen" installed, that might be forcing the connection to close. If you have one installed, either force stop it or uninstall it.
I've found that some apps running in your phone can cause ADB to crash for some reason. Try to close unnessecary apps running on your phone when developing in eclipse
In my case, I had an instance of adb.exe from another package (Android-Sync) running. Processes with this file name are common in packages that sync devices. You can find more information about programs that use an adb.exe process here: What is adb.exe ? adb.exe info
To determine if you have an adb.exe process already running, look in your Task Manager on the Processes tab to find the running adb.exe. You can right-click and select Properties from the menu to find out the full path of the adb.exe.
To solve the problem and allow Eclipse access to the correct adb.exe, I shut down Eclipse and the emulator. Then I went into the Task Manager and shut down the running adb.exe. There may be more than one. Then I restarted Eclipse and the emulator. Fortunately, when I started my Android Virtual Device, that program was smart enough to start up the correct adb.exe.
In my case was kinda problem with USB driver. Just plug your phone always to the same USB port.