This question already has an answer here:
How can I create avd for the Samsung Galaxy S4 (1080X1920) [closed]
(1 answer)
Closed 9 years ago.
I tried to create custom S4 Emulator with resolution size 1080*1920 in AVD Manager. While i starting emulator , it is not all starting just showing blank screen for 25 min . What will be the issue ? There is no possibility to create S4 emulator ?
On Windows you are limited to using 768 MB of RAM for the virtual devices you create. This creates a problem when you create a screen as big as the one you have, since it will require more RAM than that to run. If you simply try to use the normal options to create a device that big it will not run as you have seen.
The way to fix this is to use ONLY the x86 images (no it will not be a GS4 processor but it's just an emulator), and run the intel x86 emulator accelerometer (HAXM) that is all the way at the bottom of the list in the SDK Manager. Install it and during the installation it will ask if you want to allot 2 GB of your PC's RAM to the virtual device. Enable that and your device should run.
Also check "use host GPU" as stated in the other answer.
As for OSX, hopefully someone else can help.
Related
I'm trying to run the emulator in Android Studio. When I run the avd for Nexus 5 API 8, the phone image appears, but the screen is blank. Some research uncovered that the nexus screen may be too dense to display on my 1368x768 laptop screen, so I tried creating smaller density avds such as 4" wvga nexus s and 3.4" wvga. When I run these, I get the error "failed to create drawable" and no phone image pops up. When I connect my LG phone via usb in developer mode, the app works fine on the phone. Why can't I get the emulator to display the app output?
I had a similar problem and the solution was to disable hardware rendering.
Steps:
Open Tools\Android\AVD Manager
Edit the Virtual Device (Click on the pencil)
Change Emulated Performance - Graphics to 'Software-GLES 2.0'
See also this answer for other options.
After installing Genymotion or AVD Emulator on Windows 10 they got a strange resolution (can´t post images due to my reputation).
I have already tried to custom devices and their resolutions. AVD Emulator has the worst resolution, even outside the device screen, where native android buttons are (on/off, keyboard...). Anyone else with this problem?
can any one guide me to solve this issue... i have install the free version of genymotion 2.3.1 v along with virtual box. i created virtual device from the listed one....virtual device is started but it show only the white screen. image of the virtual device is attached here.
i have tried the following solution
1)setting of network adapter configuration(network IP address, DHCP server etc) setting but it doesn't solve my problem..thanks in advance.
2)re-install the genymotion
do the following if you have Intel graphics driver.
Please try to update you graphics card driver to the latest one first from this below link
Intel Drivers auto update download link updated
and then please make sure your color setting is 32 bits after updated the driver, and then try to start the virtual device again.
Please check your graphic card you need graphic card to support it
I have 3 virtual devices: nexus 5, nexus 7, nexus 10.
On nexus 5 there's no problem for running normally but nexus 7 and 10 have "white screen".
My preferences - network :
I make 4 Host-only network VirtualBox Host-Only Ethernet Adapter#1, #2, #3, #4
.
Setting of Nexus 5:
Network - Tab Adapter 1 : Ethernet Adapter#1
Network Tab Adapter 2 : Ethernet Adapter#2
Display Video Memory : 32MB
.
My solution:
Update to newest VirtualBox from 4.2.12 (bundling with my genymotion 2.3.1) to 5.0.14
Open VirBox setting - open System and tab "mother board, decrease "Base Memory" from red zone to green zone (My case, I change from 3000MB to 1500MB).
Open network - check enable netwok adapter with attach to Host-only adapter.
3.1 tab Adapter 1 : choose same with Nexus 5 (adapter#1), for nexus 7 n 10
3.2. tab Adapter 2 : choose different with Nexus 5 (adapter#3 for nexus 7 and adapter#4 for nexus 10)
For Display Video Memory, I increase from 32MB to 64MB
Finish and I can running my nexus 7 and 10 normally.
Hope my solution will help your problem too ^_^
regard, from Indonesian with love
You may also check you BIOS for "INTEL VIRTUALIZATION TECH" is enabled. That's a must for VM Box.
On my Lenovo ThinkPad x61t with Mobile Intel 965 Express Chipset Family on Windows 10 Professinal 64-bit I had the same issue (White Screen). The Genymotion Version is 2.8.1 (Revision 20161122-fbfadbe) and the VirtualBox Version (with GuestAdditions installed) is 5.1.12 r112440 (Qt5.6.2).
On the same mashine with xUbuntu 16.04. everything went fine - same Genymotion and VirtualBox versions.
Solution
The current graphics driver version automatically installed buring the Windows 10 is 8.15.10.2697. In contrast, the lasted version offered by Intel is 8.15.10.1930 (15.12.75.4.1930), which is a lower version number.
Installing the older driver version from Intel solved the problem: Now the VM shows a black screen and the toolbar on the right.
I can I create a AVD for android 4.0.3 so that I can test my app on emulator?
I have download android 4.0.3 SDK from Android SDK manager. But how can I create a AVD so that i will run as an tablet environment? The only one I found is SamSung Galaxy Tab, but that is for API 8. I am looking for something which works on 4.0.3
Thank you.
Check How to Test Your Application on Multiple Screens
in fallowing link:
http://developer.android.com/guide/practices/screens_support.html
its given there how can you test your app on tablet.
you just have to change your avd according to extra large.
remember one thing skin for tablet is available from 3.0 .
In 4.0 skin for tablet is not there.
for that try 3.0 to 3.2 versions( which were made for tablets specifically. \
Android avd sucks,
I suggest, use genymotion its fast. faster then your phone
If you are looking for a skinned version of the Samsung Galaxy Tab, it is currently not available for any of the ICS API levels.
And using just the resolution to create Tablet emulator for ICS can be slightly tricky. For example, the Samsung Galaxy S II has a resolution of 720 * 1280 pixels.
To create an AVD for a tablet based on the ICS API, you should use the "WXGA800" from the drop down under the "Skin" option. I used this very option to create a tablet AVD and use it all the time.
Hope this helps.
in skin: where you select between built-in or resolution check in built-in drop down if WXGA720 or WXGA800 exists, if any of two are there then select one and create avd in the case of 4.0 it creates tab.
If you start eclipse.
Click in the menubar [Window -> AVD Manager]
Click 'New' to create a new emulator.
Here you can select which target/platform you want to run on it.
And select the resolution for the emulator.
FYI, you can create any size/resolutions of AVD. Just define the resolutions while creating AVD.
as far as i can see, there is no specific device emulator for 4.0.3. you can just create an avd from device manager with the api level 15 as the previous answer says. doesn't it work for you?
Most answers are 7 year old now and eclipse specific.
The current solution using Android Studio described here is:
open Android Studio
Go to Tools -> AVD Manager
Click + Create Virtual Device
This question already has answers here:
Closed 10 years ago.
Possible Duplicate:
Emulate Samsung Galaxy Tab
I want to check my application on a samsung galaxy tab. Can anybody tell me how much resolution I need give to create the avd? And how to create an emulator like the samsung galaxy tab?
Thanks
Check this out:
http://innovator.samsungmobile.com/galaxyTab.do
Is a Samsung's official Galaxy Tab AVD.
You can actually download a Samsung component via AVD that contains a configuration for Galaxy Tabs.
Here are precise instructions. I would recommend this over simply entering the resolution manually.
Resolution is 1024×600! You can enter an exact resolution in the Android SDK and AVD Manager.