is ist possible to make a connection to a "master" (not internet) over a browser using bluetooth? I want to make a service possibility to a device without creating an App (or just a invisible "driver" App if necessary).
Since you've tagged it as bluetooth-lowenergy I'm going to assume you're trying to do something with that... And in that case, I don't think there's any direct way for a browser to access a low-energy device. You'd have to develop some sort of application that would act as a translator between the low-energy interface and something the browser would understand like a web server.
Bluetooth and WiFi are very similar radio technologies (even using the same frequencies), but WiFi can transport TCP/IP/HTTP to support internet browsing, while I'm not aware of Bluetooth (LE or normal) being able to do that.
Related
I've started to develop a chat application for Android. This app is supposed to function without internet and, most importantly, without an access point; It has to connect Android devices in a pure P2P manner.
However I've followed the following tutorials posted in android developers guide:
http://developer.android.com/training/connect-devices-wirelessly/nsd.html
http://developer.android.com/training/connect-devices-wirelessly/wifi-direct.html#fetch
Afterwards, I've tested my app on 3 devices, the problem is one of the devices acts as an access point, preventing other devices from connecting with each other if they are connected to it.
This doesn't work for my app, because I want each user to be able to connect to multiple users at the same time.
What do you suggest I do in order to achieve pure P2P connection for my Android app?
Does the group owner acts as an access point?
EDIT
After I've done some research I found the WiFi Direct is not suitable for my project since it has to assign a device as an access point, what I'm looking for is WiFi ad hoc mode or (IBSS) in Android Anybody got any suggestion on how to start working on that?
By using bt and wifi simultaneously, you can try to extend the network further. This will require some kind of packet routing.
Also, it seems android ignores wlan cards connected to usb otg - just plugging in extra wlan dongles could allow easy extension of network.
So I am developing an APP and I need to connect multiple android and multiple Iphone to send text data without any internet connection or service provider data network.
So one of the phone will have to act as a server to relay information between them. But the app will have to decide which phone will be the server and if a phone that is the server leaves the conversation then another phone will pickup as the server this will all be done with some smart programming but before I get there.
I know Android WiFi direct can do a one to many connection setup which makes it easy to connect android phone and accomplish the task between android phone only. But the problems comes when I need to connect Iphone with the android phones. Since the Iphone must be able to act as a server as well.
I would like to know a few things:
Can I connect Android and Iphone via WiFi Direct?
Can I connect Android and Iphone using Multipeer connectivity feature on Iphone?
Is there anyway to create a soft access point using Iphone? I know android can do this via WiFi direct feature.
If non of these can work can you suggest something.
From the discussion here it doesn't look possible
I wonder though if both OS allow enough control over the WiFi transceiver if you couldn't just write an app that could what you are asking and just bypassing the built in software architecture all together. I would think Bluetooth would be too weak except in extremely dense device saturation environments, but just for proof of concept that could be another route to take. My guess though is that you just wouldn't get that level of control over any of the radios inside a phone through the current OS.
what is the best framework that I should use to make a remote control app for Android. What I want to do is something like Tony Fadel's app for Android and Iphone where you control your house thermostat temperature remotely with a smartphone app.
I was going to use sockets programming, but not sure if that is the best way. If it is then i will use it, but wanted some feedback before i get started.
If I make one android device the server and the other device the client I will still have to manually set the IP address every time I want to connect the client to the server.
I am trying to avoid having to make a web-app and having to make a php website to act as a server for this. Having to keep a server running is too much overhead. would rather make something like two android phones or tablets that can send message to each other over the internet or wifi router without too much setup and effort.
Would appreciate any ideas on this. I can't figure out how the nest thermostat works (http://www.nest.com/) but that is kind of the functionality that I am looking to copy. I wonder if they have to use a centralized server for all of the remote controls. If there is a way to do this peer to peer that would be great. that way all i would need is two Android tablets.
The other examples I can think of is VOIP like skype and google talk. I am sure these don't use a centralized server for voice calls. My needs are much more simple. no voice or video, only sending text messages from one android device to another over the internet. Each android device will probably be using wifi exclusively.
I like to do a project based on android.I like to create an application for controlling lights in a room.My doubt is whether I can control those lights from anywhere using the androiod phone or it can only be controlled through USB cable or via bluetooth.If it can be controlled from anywhere how does the ADK board works,specifically how it transmits he data to the phone?
If the controller has a bluetooth radio SPP module (like a connectblue bluetooth to serial adapter) on it, then you can connect your phone's bluetooth to it, open a communication socket and send serial data between the phone and the controller board. No internet and no web server needed. Of course, this only works if your phone is in range of the controller (say, less than 10 to 30m)
To control the light from far away, then you need to connect each device (controller and phone) to the internet. You do not need to do it with a web server (though you could if you wanted) You can communicate data across the internet however you want, using whatever transport protocol best suits your purpose.
You could make it with a Arduino Board. Its Developt with C/C++. It's perfect for Android you will found many Tutorials
Everything communicates through a web server, somewhere. You'll have to have your hardware connected to the internet somehow, and your custom device can communicate with a phone through C2DM, or maybe a REST API or something. Bottom line is, you'll need a web component.
anyone know if its posible to make an application to simulate a touchscreen mouse or trackpad by bluetooth??
How can I make that the PC (or MAC) knows me as a mouse device?
Regards,
Juan
You should have a look at the Bluetooth HID specification. It may be possible, depending on the stack of the device that you are using to emulate a mouse/trackpad. I'm not familiar with the stack on Android (assuming that's the platform you're using from the tag on your question) so I don't know if it's possible from there.
Essentially, you create a HID service on the L2CAP protocol. The service record specifies the HID descriptors which describe the data being sent from emulating device. The HID driver on the host computer should be able to interpret that data.
It might be useful to try to connect to another Bluetooth mouse/trackpad from the desktop (Bluecove on a stack other than Microsoft is a good way to hack around in Bluetooth). Have a look at the service record for the HID service on the mouse/trackpad. Also, look at the data coming from the mouse/trackpad for an idea of what needs to be sent and when.
Alternatively, you could write a server application on your computer that communicates via another Bluetooth protocol (e.g., RFCOMM/SPP) to the input-device emulator app running on your phone. The server application would simulate the input device (e.g., move the mouse pointer around on the screen, etc).
Instead of creating your own project why dont you contribute to the remotedroid project?
I'm assuming you know your bluetooth api's well. Remote droid uses Wifi and OSC messaging to communicate with the PC.
Yes you may use GlovePie with the wiimote connected to BlueSoeil, It will alow you to do anything with you computer with the wiimote. It also has a Language it uses
I think you want this:
Serverless Bluetooth Keyboard & Mouse for PC/Phone
It's even open-source!
Unfortunately it is not open source, it just has a GitHub readme for some reason.
But still the app is quite good!