I switched over from Eclipse to Android Studio in the last few days and have gotten most everything working. However, when I generate a signed APK it appears as though ProGuard is never running.
I am using the Generate Signed APK Wizard, selecting 'Run ProGuard' and specifying my proguard.cfg as the config file. The build process runs without errors and generates a functional apk, but that apk is 65% larger than the one generated by Eclipse. When I generate the apk through Android Studio's APK Wizard and do not select 'Run Proguard' the resulting apk is the same size as the one that should have had ProGuard run on it. No mapping.txt, seeds.txt, or usage.txt is generated anywhere in my project directory. I have tried adding
buildTypes {
release {
runProguard true
proguardFile file('proguard.cfg')
proguardFile getDefaultProguardFile('project-android.txt')
}
}
and variations to my build.gradle file but that has had no effect either.
This is occurring on Android Studio 0.2.0, though I was seeing the same behavior on 0.1.9. I am working on Windows 7.
Can anyone tell me what might be going on? I would be happy if I could find the logs ProGuard is supposed to generate.
Just update your build.gradle
buildTypes {
release {
minifyEnabled true
proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.txt'
}
}
Details Reference.
I hope it will helps you
Happily, I have found a solution. The issue was that before creating the signed apk, I had modified the package name in the AndroidManifest in order to overwrite a particular build in the Google Play Store. However, this change of package name had not refactored all of the corresponding "import 'package name'.R;" lines throughout the code. Today, after re-importing the project, it would no longer build because of errors attempting to import R. Once I modified all the import lines, not only did my project build properly, but exporting the signed apk properly ran ProGuard.
I'm guessing that Android Studio was somehow caching the "import R" lines and that when ProGuard was attempting to run it did not have those cached values and then crashed. Why there was no error output for me to see, I do not know.
**in new Gradle system**
BuildType.runProguard -> minifyEnabled
BuildType.zipAlign -> zipAlignEnabled
BuildType.jniDebugBuild -> jniDebuggable
BuildType.renderscriptDebug -> renderscriptDebuggable
ProductFlavor.renderscriptSupportMode -> renderscriptSupportModeEnabled
ProductFlavor.renderscriptNdkMode -> renderscriptNdkModeEnabled
or visit at
http://tools.android.com/tech-docs/new-build-system
Related
Under minifyEnabled I changed from false to true.
buildTypes {
release {
minifyEnabled true
proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro'
}
}
}
Then I generated a signed APK and used javadecompilers.com to see if files had been altered and the classes,variables, etc were still the same.
I also attempted to use dex2jar, but the terminal stated that no files were found. I also attempted to export my android studio project as a jar file.
Any other suggestions ?
Did you build a release version of your application? As default for minifyEnabled is false, so if you build a debug version, that would explain it.
Other than that, could you post your proguard-rules.pro file? It might contain exceptions that are too broad.
I've used dex2jar many many times, and it's worked for me.
I'm on a mac, so i simply run "./d2j-dex2jar.sh app.apk" command, and then open the resulting jar file in a program called JDGui, there you can see all the files in the jar file.
I switched my IDE from eclipse to android studio and generated apk after some very minor changes (No class or files were added).
The APK generated from eclipse was around of size 3 MB but when I generated APK from android studio, the apk size was around 5.5 MB.
I even tried to clean and generate APK in Release mode but still APK size was same i.e. 5.5 MB.
Is there any specific reason behind this in android studio or am I missing something ?
your problem certainly have nothing to do with Android Studio or Eclipse. It's todo with Gradle and Ant. Those are the built systems used by each respectively.
On a general approach it seems to be that the Ant build was using ProGuard to remove unused resources and classes whilst your build.gradle file is not instructing Gradle to do the same.
Trying adding the minifyEnabled to your release build, like in the example below.
PS: change the name of the proguard file to the one on your project
buildTypes {
release {
minifyEnabled true
shrinkResources true
proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.txt'
}
}
I have been using IDEA 13.1 and created a Gradle project with it. When I compile the app and start it, it creates only the unaligned APK.
Opening the same project with Android Studio, and rebuilding it and starting the app, generates both unaligned and regular unsigned APK.
Is this a bug in IntelliJ IDEA? If not, where can I set that it always generates a regular, aligned, APK?
The alignment/output does not depend on the IDE but on your gradle config. Both IntelliJ and AndroidStudio just run Gradle in background.
By default, the autogenerated Gradle file build.gradle does not run the zipAlign task, i.e. the one aligning the apk. So you end up with an unaligned apk.
You can easily change it by adding the zipAlignEnabled true property, like this:
release {
minifyEnabled false
proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro'
zipAlignEnabled true
}
But let me remind you that archive alignment is just an optimization, it does not change your app.
Also, from the docs:
Caution: zipalign must only be performed after the .apk file has been signed with your private key. If you perform zipalign before signing, then the signing procedure will undo the alignment.
For further information, please have a look at this thread, this thread and the docs.
I get the message: You uploaded a debuggable APK. For security reasons you need to disable debugging before it can be published in Google Play. Learn more about debuggable APKs.
I generate my APK with Android Studio, Build->Generate Signed APK. I created a Keystore.
With a powerful gradle build system in android studio you can do it without even touching your code. You can also make your debug build with debuggable false to test what differences are
buildTypes {
debug {
runProguard false/true
proguardFile getDefaultProguardFile('proguard-android.txt')
debuggable false/true
}
release {
runProguard true/false
proguardFile getDefaultProguardFile('proguard-android.txt')
debuggable false/true
}
}
Power of Gradle.
Note : You wont be able to see the process in the left pane of DDMS under device info even the application running in device, if it has debuggable false in build configuration.
If you have the tag android:debuggable="true" in your application manifest, or if you don't have it in, try changing it/putting this in your application manifest tag:
android:debuggable="false"
Check DEBUG value in BuildConfig.java file in gen folder. Sometime if we are not doing clean build this value remains true.
Best is to do a clean release build.
If you're using Gradle (As you should) set the debug and release variables, then go to your build variables tab and select release flavor.
Build the project, and if you set everything up correctly, your apk should be in the build/apk folder of your project.
I was having this same problem. Anymore, android:debuggable in the manifest file is deprecated if you are using Android Studio; you shouldn't have it there. The problem in my case was that the system was incorporating debug versions of some component classes, which did not get rebuilt (as I assumed they would) when I switched from doing debug to release builds. Everything worked once I selected (from the menus) Build->Clean Project.
In my android app, i want to test some features with proguard on.
I don't need to really "debug" it, but i want proguard to run when i hit run in eclipse. I don't want to export the binary every time (so, in release mode) and save as apk and get it to the device to test.
Is there any way to run proguard in this way?
Update:
It seems like this is possible if you are not using Eclipse; as question title does not include Eclipse, there are multiple correct answers to this question.
If you want to make the whole build process easier for you, you should switch over to gradle and Android Studio IDE.
Then you could easily add the following to your build.gradle file to run ProGuard:
android {
buildTypes {
release {
}
debug {
minifyEnabled true
proguardFile 'proguard-android.txt'
zipAlignEnabled true
}
}
}
This will run ProGuard on your debug build, configured with the file "proguard-android.txt", which should be put at your project's root folder. And in addition your apk is being zip aligned (Just remove "zipAlignEnabled true", if you don't want that to happen). If you want to do the same for your release build, just add those three lines under "release".
Slightly off-topic: Stuff like adding dependencies, signing your apk or adding other custom tasks to your build process is also way more uncomplicated with gradle. In addition you'll be able to not only build your apk via Android Studio IDE, but also via a simple command on the command line (e.g. ./gradlew assembleDebug). So if you are working on a team, the setup process for new members is just one "./gradlew assembleDebug" away. Without the need for any IDE configuration at all. Importing your project including all dependencies is as simple as a one-click process
EDIT:
As of Gradle Android Build Tools version 0.14.0 the property names have changed (http://tools.android.com/tech-docs/new-build-system):
BuildType.runProguard -> minifyEnabled
BuildType.zipAlign -> zipAlignEnabled
I've updated the above code.
Old Answer :
http://developer.android.com/tools/help/proguard.html
ProGuard runs only when you build your application in release mode, so you do not have to deal with obfuscated code when you build your application in debug mode.
When you build your application in release mode, either by running ant release or by using the Export Wizard in Eclipse, the build system automatically checks to see if the proguard.config property is set. If it is, ProGuard automatically processes the application's bytecode before packaging everything into an .apk file. Building in debug mode does not invoke ProGuard, because it makes debugging more cumbersome.
Update: 13-3-2016
It is possible with the new gradle build system. You need to set minifyEnabled to true in your build.gradle file. Generally you have pro-guard running in release mode. There are other options available like shrinking resources. You can find some useful info # http://tools.android.com/tech-docs/new-build-system
Also do have a look #
http://developer.android.com/tools/building/configuring-gradle.html
android {
...
buildTypes {
release {
minifyEnabled false
proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro'
}
debug {
minifyEnabled true
proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro'
}
}
}
Regarding custom Ant builds (and based on Victor's answer), adding the following to my build.xml file works for me:
<target name="-debug-obfuscation-check">
<!-- enable proguard even in debug mode -->
<property name="proguard.enabled" value="true"/>
<!-- Secondary dx input (jar files) is empty since all the jar files will be in the obfuscated jar -->
<path id="out.dex.jar.input.ref" />
</target>
Notice that I had to override (actually pre-set) the out.dex.jar.input.ref; otherwise, the later running of dx will attempt to merge non-disjoint jars and throw the DexException: Multiple dex files define Xxx.
It is possible if you build with Ant. See Android custom build using Ant on how to build your project with ant. Then, simply override in the project's build.xml the target "-debug-obfuscation-check" and set proguard.enabled to true:
<target name="-debug-obfuscation-check">
<!-- proguard is never enabled in debug mode -->
<property name="proguard.enabled" value="true"/>
</target>
With Android Studio you can use -dontobfuscate option in your Proguard rules file and debugger will work fine. I'm not sure if it works with Eclipe as well.
If you are using AGP (Android Gradle Plugin) 7.2.0 or newer, beware that we have a bug open without a solution so far. Workaround as of now is to downgrade AGP to 7.1.3 so you can obfuscate your debug APK.
https://issuetracker.google.com/issues/242214899?pli=1