I have a logo view, which is a full screen fragment containing single ImageView.
I have to perform some operations after the logo image is completely visible.
Following code is used to invoke the special task
#Override
public View onCreateView(LayoutInflater inflater, ViewGroup container,
Bundle savedInstanceState) {
ImageView logoImageMaster = new ImageView(getContext());
//logoImageMaster.setImageResource(resID); //even after removing this, i am getting the callback twice
try {
// get input stream
InputStream ims = getActivity().getAssets().open("product_logo.png");
// load image as Drawable
Drawable d = Drawable.createFromStream(ims, null);
// set image to ImageView
logoImageMaster.setImageDrawable(d);
}
catch(IOException ex) {
}
logoImageMaster.getViewTreeObserver().addOnGlobalLayoutListener(new ViewTreeObserver.OnGlobalLayoutListener() {
#Override
public void onGlobalLayout() { //FIXME get called twice. Check this out, no info to distinguish first from second
// Log.e("PANEL", "onGlobalLayout of Logo IV ---------------------------------");
activityInterface.doSpecialLogic();
}
});
return logoImageMaster;
}
My exact problem is, onGlobalLayout is called twice for this view hierarchy.
I know that onGlobalLayout is invoked in performTraversal of View.java hence this is expected.
For my use case of Single parent with Single child view, I want to distinguish the view attributes such that doSpecialLogic is called once[onGlobalLayout is called twice] , after the logo image is completely made visible.
Please suggest some ideas.
OnGlobalLayoutListener gets called every time the view layout or visibility changes. Maybe you reset the views in your doSpecialLogic call??
edit
as #Guille89 pointed out, the two set calls cause onGlobalLayout to be called two times
Anyhow, if you want to call OnGlobalLayoutListener just once and don't need it for anything else, how about removing it after doSpecialLogic() call??
if (Build.VERSION.SDK_INT < Build.VERSION_CODES.JELLY_BEAN) {
//noinspection deprecation
logoImageMaster.getViewTreeObserver().removeGlobalOnLayoutListener(this);
} else {
logoImageMaster.getViewTreeObserver().removeOnGlobalLayoutListener(this);
}
activityInterface.doSpecialLogic();
It seems to be called one time for each set done over the imageView
logoImageMaster.setImageResource(resID);
logoImageMaster.setImageDrawable(d);
You should Try using kotlin plugin in android
This layout listener is usually used to do something after a view is measured, so you typically would need to wait until width and height are greater than 0. And we probably want to do something with the view that called it,in your case
Imageview
So generified the function so that it can be used by any object that extends View and also be able to access to all its specific functions and properties from the function
[kotlin]
inline fun <T: View> T.afterMeasured(crossinline f: T.() -> Unit) {
viewTreeObserver.addOnGlobalLayoutListener(object : ViewTreeObserver.OnGlobalLayoutListener {
override fun onGlobalLayout() {
if (measuredWidth > 0 && measuredHeight > 0) {
viewTreeObserver.removeOnGlobalLayoutListener(this)
f()
}
}
})
}
[/kotlin]
Note:
make sure that ImageView is described properly in the layout. That is its layout_width and layout_height must not be wrap_content. Moreover, other views must not result in this ImageView has 0 size.
In my app, I need to set the width of a view based on the width of another view. However, Activity's onCreate() method does not seem to be a good place to do so. The view's width via getWidth() returns 0. Other methods onStart() and onResume() also behave similarly.
I am wondering if there is any method on an Activity that is called after a view has been initialized? Or, is there is another way I can achieve my objective.
Try onGlobalLayoutListener. Get the instance of your main root view, and then just use addOnGlobalLayoutListener() method.
You will receive a callback when your views are already created and measured on Screen:
http://developer.android.com/reference/android/view/ViewTreeObserver.OnGlobalLayoutListener.html
Declare onGlobalLayoutListener in onCreate method:
View firstView = (View) findViewById(R.id.firstView);
View secondView = (View) findViewById(R.id.secondView);
firstView.getViewTreeObserver().addOnGlobalLayoutListener(new ViewTreeObserver.OnGlobalLayoutListener() {
#Override
public void onGlobalLayout() {
// Ensure you call it only once :
firstView.getViewTreeObserver().removeGlobalOnLayoutListener(this);
int width = firstView.getWidth();
int height = firstView.getHeight();
// set dimensions of another view with that dimensions
secondView.setWidth(width);
secondView.setHeight(height);
}
});
I would like to perform some task after the creation of the graphic interface of the activity. I need to know the exact height and width of some views and change the layoutParams of some of those views based on the width and height. In the onResume method the views have all the parameters still equal to 0...
As for now I'm using a delayed task that runs after some time from the onCreate but this isn't a good solution at all...
What is the last method called in the activity creation? And are the views' width and height available in such method?
Call this inside of the onCreate()
final View rootView = getWindow().getDecorView().getRootView();
rootView.getViewTreeObserver().addOnGlobalLayoutListener(
new ViewTreeObserver.OnGlobalLayoutListener() {
#Override
public void onGlobalLayout() {
//by now all views will be displayed with correct values
}
});
onResume() is last, but perhaps better is onViewCreated(). Its advantage is that it is not invoked every time you regain focus. But try getting properties of your view inside of post() over layout element which you need. For example:
textView.post(new Runnable() {
#Override
public void run() {
// do something with textView
}
});
The last method that runs when activity starts is onResume().
You can find it at Activity lifecycle.
If that is not good enough for you, run delayed task from this onResume() and you'll be fine.
In the last line of the onResume() method get all the data you want. It should show you all that you need.
Use a Coroutine:
In onCreate() ...
CoroutineScope(SupervisorJob()).launch {
getImageAttributes()
}
... then use a while loop to wait until image is in View ...
private fun getImageAttributes() {
while (imageView.height == 0) { /* */ }
val h = imageView.height
val w = imageView.width
val b = imageView.clipBounds
val x = imageView.x
val y = imageView.y
val tx = imageView.translationX
val ty = imageView.translationY
}
You should add a timeout or make the Job cancellable if there is a chance that the imageView.height is going to be 0.
I'm getting height and width of a view, inflated in the getView() method. It's a grid item.
Usually I use post() on the view to get the size, after it was attached to the layout. But it returns 0.
final View convertViewFinal = convertView;
convertView.post(new Runnable() {
#Override
public void run() {
doSomethingWithConvertView(convertViewFinal);
}
});
...
doSomethingWithConvertView(View v) {v.getWidth(); /*returns 0*/};
How do I get the size?
While using a viewTreeObserver definitely works, I have found that calling measurements requirements on inflated views can be done reliably using a runnable from the activity's view. i.e.
someActivityInstance.getWindow().getDecorView().post(new Runnable() {
#override
public void run() {
// someMeasurements
}
});
The thing is that convertview most likely is not drawn on the phone screen yet, so you have to wait until it is ready.
You need to use a ViewTreeObserver, to know exactly when the view has been drawn.
Check this answer for more info:
When Can I First Measure a View?
You probably is calling this at onCreate or onStart or onResume, methods which runs before layout measure.
But there is a lot of work arounds, this is one good option:
ViewTreeObserver vto = rootView.getViewTreeObserver();
vto.addOnGlobalLayoutListener(new OnGlobalLayoutListener() {
public void onGlobalLayout() {
v.getWidth();//already measured...
}
});
Where rootView may be any viewGroup in a higher level than the one you want the width.
But be aware that this listner may run more than once.
I have a view made up of TableLayout, TableRow and TextView. I want it to look like a grid. I need to get the height and width of this grid. The methods getHeight() and getWidth() always return 0. This happens when I format the grid dynamically and also when I use an XML version.
How to retrieve the dimensions for a view?
Here is my test program I used in Debug to check the results:
import android.app.Activity;
import android.os.Bundle;
import android.widget.TableLayout;
import android.widget.TextView;
public class appwig extends Activity {
#Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.maindemo); //<- includes the grid called "board"
int vh = 0;
int vw = 0;
//Test-1 used the xml layout (which is displayed on the screen):
TableLayout tl = (TableLayout) findViewById(R.id.board);
tl = (TableLayout) findViewById(R.id.board);
vh = tl.getHeight(); //<- getHeight returned 0, Why?
vw = tl.getWidth(); //<- getWidth returned 0, Why?
//Test-2 used a simple dynamically generated view:
TextView tv = new TextView(this);
tv.setHeight(20);
tv.setWidth(20);
vh = tv.getHeight(); //<- getHeight returned 0, Why?
vw = tv.getWidth(); //<- getWidth returned 0, Why?
} //eof method
} //eof class
I believe the OP is long gone, but in case this answer is able to help future searchers, I thought I'd post a solution that I have found. I have added this code into my onCreate() method:
EDITED: 07/05/11 to include code from comments:
final TextView tv = (TextView)findViewById(R.id.image_test);
ViewTreeObserver vto = tv.getViewTreeObserver();
vto.addOnGlobalLayoutListener(new OnGlobalLayoutListener() {
#Override
public void onGlobalLayout() {
LayerDrawable ld = (LayerDrawable)tv.getBackground();
ld.setLayerInset(1, 0, tv.getHeight() / 2, 0, 0);
ViewTreeObserver obs = tv.getViewTreeObserver();
if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.JELLY_BEAN) {
obs.removeOnGlobalLayoutListener(this);
} else {
obs.removeGlobalOnLayoutListener(this);
}
}
});
First I get a final reference to my TextView (to access in the onGlobalLayout() method). Next, I get the ViewTreeObserver from my TextView, and add an OnGlobalLayoutListener, overriding onGLobalLayout (there does not seem to be a superclass method to invoke here...) and adding my code which requires knowing the measurements of the view into this listener. All works as expected for me, so I hope that this is able to help.
I'll just add an alternative solution, override your activity's onWindowFocusChanged method and you will be able to get the values of getHeight(), getWidth() from there.
#Override
public void onWindowFocusChanged (boolean hasFocus) {
// the height will be set at this point
int height = myEverySoTallView.getMeasuredHeight();
}
You are trying to get width and height of an elements, that weren't drawn yet.
If you use debug and stop at some point, you'll see, that your device screen is still empty, that's because your elements weren't drawn yet, so you can't get width and height of something, that doesn't yet exist.
And, I might be wrong, but setWidth() is not always respected, Layout lays out it's children and decides how to measure them (calling child.measure()), so If you set setWidth(), you are not guaranteed to get this width after element will be drawn.
What you need, is to use getMeasuredWidth() (the most recent measure of your View) somewhere after the view was actually drawn.
Look into Activity lifecycle for finding the best moment.
http://developer.android.com/reference/android/app/Activity.html#ActivityLifecycle
I believe a good practice is to use OnGlobalLayoutListener like this:
yourView.getViewTreeObserver().addOnGlobalLayoutListener(new OnGlobalLayoutListener() {
#Override
public void onGlobalLayout() {
if (!mMeasured) {
// Here your view is already layed out and measured for the first time
mMeasured = true; // Some optional flag to mark, that we already got the sizes
}
}
});
You can place this code directly in onCreate(), and it will be invoked when views will be laid out.
Use the View's post method like this
post(new Runnable() {
#Override
public void run() {
Log.d(TAG, "width " + MyView.this.getMeasuredWidth());
}
});
I tried to use onGlobalLayout() to do some custom formatting of a TextView, but as #George Bailey noticed, onGlobalLayout() is indeed called twice: once on the initial layout path, and second time after modifying the text.
View.onSizeChanged() works better for me because if I modify the text there, the method is called only once (during the layout pass). This required sub-classing of TextView, but on API Level 11+ View. addOnLayoutChangeListener() can be used to avoid sub-classing.
One more thing, in order to get correct width of the view in View.onSizeChanged(), the layout_width should be set to match_parent, not wrap_content.
Are you trying to get sizes in a constructor, or any other method that is run BEFORE you get the actual picture?
You won't be getting any dimensions before all components are actually measured (since your xml doesn't know about your display size, parents positions and whatever)
Try getting values after onSizeChanged() (though it can be called with zero), or just simply waiting when you'll get an actual image.
As F.X. mentioned, you can use an OnLayoutChangeListener to the view that you want to track itself
view.addOnLayoutChangeListener(new View.OnLayoutChangeListener() {
#Override
public void onLayoutChange(View v, int left, int top, int right, int bottom, int oldLeft, int oldTop, int oldRight, int oldBottom) {
// Make changes
}
});
You can remove the listener in the callback if you only want the initial layout.
I guess this is what you need to look at: use onSizeChanged() of your view. Here is an EXTENDED code snippet on how to use onSizeChanged() to get your layout's or view's height and width dynamically http://syedrakibalhasan.blogspot.com/2011/02/how-to-get-width-and-height-dimensions.html
ViewTreeObserver and onWindowFocusChanged() are not so necessary at all.
If you inflate the TextView as layout and/or put some content in it and set LayoutParams then you can use getMeasuredHeight() and getMeasuredWidth().
BUT you have to be careful with LinearLayouts (maybe also other ViewGroups). The issue there is, that you can get the width and height after onWindowFocusChanged() but if you try to add some views in it, then you can't get that information until everything have been drawn. I was trying to add multiple TextViews to LinearLayouts to mimic a FlowLayout (wrapping style) and so couldn't use Listeners. Once the process is started, it should continue synchronously. So in such case, you might want to keep the width in a variable to use it later, as during adding views to layout, you might need it.
Even though the proposed solution works, it might not be the best solution for every case because based on the documentation for ViewTreeObserver.OnGlobalLayoutListener
Interface definition for a callback to be invoked when the global layout state or the visibility of views within the view tree changes.
which means it gets called many times and not always the view is measured (it has its height and width determined)
An alternative is to use ViewTreeObserver.OnPreDrawListener which gets called only when the view is ready to be drawn and has all of its measurements.
final TextView tv = (TextView)findViewById(R.id.image_test);
ViewTreeObserver vto = tv.getViewTreeObserver();
vto.addOnPreDrawListener(new OnPreDrawListener() {
#Override
public void onPreDraw() {
tv.getViewTreeObserver().removeOnPreDrawListener(this);
// Your view will have valid height and width at this point
tv.getHeight();
tv.getWidth();
}
});
Height and width are zero because view has not been created by the time you are requesting it's height and width . One simplest solution is
view.post(new Runnable() {
#Override
public void run() {
view.getHeight(); //height is ready
view.getWidth(); //width is ready
}
});
This method is good as compared to other methods as it is short and crisp.
You should rather look at View lifecycle: http://developer.android.com/reference/android/view/View.html Generally you should not know width and height for sure until your activity comes to onResume state.
You can use a broadcast that is called in OnResume ()
For example:
int vh = 0;
int vw = 0;
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.maindemo); //<- includes the grid called "board"
registerReceiver(new BroadcastReceiver() {
#Override
public void onReceive(Context context, Intent intent) {
TableLayout tl = (TableLayout) findViewById(R.id.board);
tl = (TableLayout) findViewById(R.id.board);
vh = tl.getHeight();
vw = tl.getWidth();
}
}, new IntentFilter("Test"));
}
protected void onResume() {
super.onResume();
Intent it = new Intent("Test");
sendBroadcast(it);
}
You can not get the height of a view in OnCreate (), onStart (), or even in onResume () for the reason that kcoppock responded
Simple Response: This worked for me with no Problem.
It seems the key is to ensure that the View has focus before you getHeight etc. Do this by using the hasFocus() method, then using getHeight() method in that order. Just 3 lines of code required.
ImageButton myImageButton1 =(ImageButton)findViewById(R.id.imageButton1);
myImageButton1.hasFocus();
int myButtonHeight = myImageButton1.getHeight();
Log.d("Button Height: ", ""+myButtonHeight );//Not required
Hope it helps.
Use getMeasuredWidth() and getMeasuredHeight() for your view.
Developer guide: View
CORRECTION:
I found out that the above solution is terrible. Especially when your phone is slow.
And here, I found another solution:
calculate out the px value of the element, including the margins and paddings:
dp to px:
https://stackoverflow.com/a/6327095/1982712
or dimens.xml to px:
https://stackoverflow.com/a/16276351/1982712
sp to px:
https://stackoverflow.com/a/9219417/1982712 (reverse the solution)
or dimens to px:
https://stackoverflow.com/a/16276351/1982712
and that's it.