Related
So I want to use my new Nexus 5 for debugging my apps.I tried to install the Android USB driver via the device manager
But my nexus is listed as portable device and uses the default windows driver.How can I replace the windows MTP-USB driver with the android driver?When I click update driver software und select "\sdk\extras\google\usb_driver", it tells me that the driver software is up-to-date.
Edit:
USB Debugging is already activated
Edit 2:
Sorry my fault there are actually two Nexus 5 in my Device Manager. The other one accepted the android driver.
First you'd want to make sure you device is in 'debug mode' or 'usb debugging' - set through development settings in your phone's 'system settings'
then run adb devices from your adt-bundle folder/platform-tools to see if it got your device.
Edit:
if it doesn't work try, from your 'drivers' tab-
Update Driver -> Browse for driver software on my computer -> Let me pick from a list of device drivers from my computer -> Have Disk -> Navigate to your usb_driver folder
Notice the extra step near the end, you don't submit the folder in the "Browse for driver software on my computer" tab
download this usb driver: http://dlcdnet.asus.com/pub/ASUS/EeePAD/nexus7/usb_driver_r06_windows.zip
go to the device manager , right click the nexus device and choose properties, choose "hardware" and then choose update your driver , choose manualy and pick the folder you opend the zip file to and press apply.
open your setting in nexus . go to : "about the device" , at to the bottom of the page and press it strong text7 times .
open the developers menu and enable debug with usb.
finally press storage from the setting menu and click the menu that apears at the top left corner. press the connect usb to the computer, choose the second option (PTP).
that should do the trick.
The way I got the drivers installed for my nexus 5 was by following these instructions but I had to turn off my phone and do the steps below but for following the first set of instructions for the link below:Nexus 5 Driver installation instructions
power off your phone.
press and hold Volume Down and Power buttons simultaneously
- an Android robot will show up and the Fastboot Mode text is listed.
connect the Nexus 5 to your PC via USB Cable.
After doing this the drivers installed but had a yell warning sign. However I was still able to get it to take commands and for it to be seen by the ADB devices command. I currently am using windows 7, and I have the adb setup in my environment variables so I can run commands from the command line.
In the command line before you call the adb devices, make sure you navigate to the android platform tools folder '\Android\android-studio\sdk\platform-tools then from here call the adb devices and you will know for sure if your device is being detected!
Just to highlight the key step that solved the problem for me using a Nexus 5.
Follow the steps by Neeraj, just replacing the first one by the drivers in http://developer.android.com/sdk/win-usb.html
Key point is to make sure you change the usb connection to use PTP and try to install the driver from the Nexus 5 under other devices.
That solved the issue for me.
Another related issue:
Every time you connect a device through USB 3.0, Windows 7 automatically installs its own drivers that can't be updated. Removing them does nothing, as they will just be immediately installed again upon reconnection.
To get get around this, you need just need to use a USB 2.0 slot.
To allow usb debugging for an lg f60 d390 in Android Studio I had to install LG PC Suit.
I had same issue, Uninstall the existing driver. Then your device will be listed under Android Device -> Composite ADB interface in device manager. You then can follow steps to update the Google - USB driver.
This answer worked for me.
Switch the USB port you use.
For whatever reason once I did this Windows recognized my device.
Android Studio 0.3.6
Fedora 18 3.11.7-100.fc18.x86_64
Nexus 5 Kitkat
Hello,
I have been using my Samsung Galaxy Tab 3 7.0 running Android 4.1.2 everything works fine with adb.
However, I have just bought a new Nexus 5 device, and when I do the following command adb devices it doesn't show my Nexus 5.
Under Android SDK Manager | Extras | Google USB Driver | status "Not compatiable with Linux"
Because I am running Fedora 18 if I need drivers what drivers for the USB do I need?
Because the Samsung works fine and I can deploy and run my apps, I think my setup is correct. So I am wondering if there is something wrong with my Nexus 5.
I have tried the following:
adb kill-server
adb start-server
Setting the Nexus 5 Camera PTP and media device MTP didn't work.
Many thanks for any suggestions,
I had a similar problem with my Nexus 4(Android version 4.4.2), it wasn't listed in adb devices.
Make sure USB debugging is enabled from device, and do the following on your PC:
Update Android SDK (Google USB Driver)
From PC Control Panel, System -> Device manager -> Right click Nexus 4 -> Update driver.
Set android-sdk-folder\extras\google\usb_driver as path to search, include subfolders checked.
If windows tells you that the driver is up to date, just uninstall the driver (right click on nexu4 -> uninstall driver) and start from step 2 again.
After that, open a cmd and type adb kill-server and then a adb devices, now it will include your device.
https://developer.android.com/studio/run/oem-usb.html
Follow these steps,
Enable Developer options in your device. To enable the developer mode, Settings->About phone, tap Build number option 7 times continuously
Go to Settings-> Developer options and Turn on USB debugging
Make sure you reconnected the device via USB and grant permission on the dialog that appears.
From the above steps it didn't work try this step, Go to Settings->Security and turn on Unknown Sources
What you need to do is this:
Settings | About Phone
Scroll to the bottom to build number.
Tap on build number about 7 times. Each time you will get a popup message saying you are x steps away from being a developer
When you get to the final step you will get a message saying now you are a developer
Go back into settings and you will see a new setting Developer options there you will see a lot of options for developers. Enable USB debugging
Re-connect you phone to the usb, and you should see you device under adb devices.
I hope this answer helps someone else.
This simple steps worked for me, I debug on my Nexus 5 and 5X devices on Windows 8.1.
The steps to follow are these:
1) Enable from Developers Options the Debug USB Mode
2) Unplug the device from the computer
3.1) Go to Settings → Storage, in the ActionBar, click the option menu and choose USB computer connection.
3.2) If you didn't find the 3.1) option then go to Settings → Developers Options → Select USB Configuration.
4) Select Camera (PTP) connection.
5) Plug the device and you should have a popup on the device allowing you to accept the computer's incoming connection, or something like that.
6) If it doesn't work try to toggle the Debug USB Mode in the Developers Options
Finally, you should see it now in the DDMS and voilà.
My windows solution:
Go here and download and unzip to an easy location:
http://developer.android.com/sdk/win-usb.html#top
Right click 'My Computer' or 'Computer'
Select properties
Select Device manager
Look for your device. It should have a yellow mark above it.
Click 'update driver software'.
select browse my computer for driver software.
select the usb_driver folder you saved earlier.
install it
and wala. magic.
For those who are still frustrated, if you are using the experimental ART runtime, try switching back to dalvik (in developer options on device)
Here is simple solution for Windows 7 and Nexus 5 on Android 5.
Download the Nexus 5 Drivers from http://androidhost.org/jelry
Extract the zip contents and place all files in a single folder on your desktop.
Connect your device to your computer.
Launch the Device Manager on your PC.
Now you should see the Nexus 5 listed in the hardware list.
Right-click the ‘Nexus 5′ line and then click on Update Driver Software.
Next, click the ‘browse my computer’ option.
In the new window click on ‘Browse…’ button.
Go to folder unzipped at step 2. Select the folder where you extract the USB Drivers. Click Next. – make sure to tick the subfolder box too.
Now, the Windows installer will search for Nexus 5 drivers, click Install when asked for permission.
Wait for the process to complete and then check the Device Manager list to confirm that the installation was successful.
Original: http://www.android.gs/download-and-install-google-nexus-5-usb-drivers-adb-fastboot/
Note: do not forget to enable USB debugging on your device :)
Something nobody has mentioned yet:
Some cables do NOT support data. I was sitting here wondering why my Nexus 5 was refusing to show up on OSX. It turned out I was using a cable that didn't support data.
I swapped to a different cable which did support it, and suddenly I was able to use USB debugging.
If anyone is trying to connect Nexus 5 to a formatted Windows XP then follow these steps:
Download and install media transfer protocol porting kit:
MTP porting kit
Download and install WMFDistributable-11 for XP:
WMFDist-11 XP
Download and install LG United Mobile Driver v3.10.1:
stackoverflow is not allowing to share more than 2 links, please google this.
Connect your device.
Go to Device Management
Right click on Nexus 5 and click Update Driver
Select Yes this time only
Select Install Software Automatically
Wait for sometime.. and enjoy transferring files
ADB and driver versions matter. The newer the device, the lower the chances of an older version ADB to work correctly.
Apps using their own ADB copy need to be updated or at least have their ADB updated manually.
When installing Helium / Carbon for instance, it uses an old / incomplete ADB. Newer devices might not link to the ADB server for this very reason.
What I'm writing here should work for any future devices on Windows and possibly *nix OSes.
First the systems must be prepared.
on Android:
activate developer mode, either from an app (like Helium, when prompted) or by accessing the about phone section, taping build number until the developer mode unlocks
in developer settings enable USB debugging
in security settings allow unknown sources
(when connected with USB cable) set USB connectivity to PTP mode (camera device, if so labeled)
in Windows:
uninstall older USB driver (with file removal) if there is one, but only when the device is connected and in developer mode, otherwise
that particular device won't be listed
install latest USB driver after the device has been plugged in and developer mode is active, the device will be listed as unknown or other in Device Manager; the drivers can be downloaded separately from Google Android support site, these are the same as vendor drivers, with only fewer ID's in inf file making the driver not being recognized for all Android devices
if the driver does not recognise the device, no problem, install it generically: Manual Install > Show All Devices > Have Disk > pick inf location of the Android USB driver and from the list select Android ADB Interface; there's not need to edit the inf by adding hardware ids, the end result is the same
each of the modes, PTP and MTP will have their own driver entry, so if the device asks for MTP, the same driver installation procedure must be followed, again
Once these steps are/were previously done correctly, adb must be tested.
If Android SDK was installed previously, open a command prompt where adb.exe is
and test the listing of the device.
adb start-server
IMPORTANT NOTE: This command will prompt the device to allow the communication between the computer it's been linked to on the first run. The prompt will also list an RSA key specific to the PC in question. Without this prompt on start-server, ADB will NOT work! Nor will any application relying on ADB.
adb devices
Must list the device(s). If the list is empty, and most likely the RSA prompt did not occur, then no communication will work. If the list is empty the current ADB (and SDK) must be updated or installed fresh (in the case of apps bringing in their own ADB runtime, like Helium / Carbon).
In the case of applications that do bring their own ADB, if the version is old, and these apps insist in using it instead of the SDK one, these files need to be replaced with the latest ones from Android SDK. Plain and simple copy & paste.
As for Android SDK, the only required packages to be installed are SDK Tools and Platform-tools. There, ADB.exe will need some support libraries, on Windows these files are AdbWinApi.dll and AdbWinUsbApi.dll. After all is done, the SDK can be uninstalled from SDK Manager while being able to retain the ADB tool if this is the only runtime used, depending on the case in question.
After doing all steps like enable debug, ... I had to put a sim card and reboot the phone
Solution for Windows 7 and Nexus 5 (should be applicable for any Nexus device):
I figured out that my system was installing the Nexus 5 default driver for windows automatically the moment I was connecting my Nexus 5 to my system through USB. So uninstalling the default driver was in vain and it gets installed automatically anyways.Moreover if you uninstall the default driver, you won't be able to locate Nexus 5 under Devices in Computer Management. So here is what i did and worked for me!
Computer-->right Click-->Manage-->Device Manager-->Portable Device-->Nexus 5-->Update Driver Software
Choose 'Browse my computer for driver software'
1.Make sure to give this location: %APPDATA%\Local\Android\sdk\extras\google\usb_driver
Click Next and you are done.
I have suffered the same issue and was able to solve it by simply changing on my Android device (Nexus 5X) in Developer options > Select USB Configuration to RNDIS (USB Ethernet)
For those trying to connect their android phone in adb with no luck and have tried every USB configuration (MTP, PTP, RNDIS). It is worthing noting that in my case with my Nexus 5X on Windows 7 I successfully connected the phone to adb only by choosing the Charging USB Configuration. With any other configuration (MTP, PTP, ...) it doesn't work.
USB Driver: Google USB Driver v11
ADB Version: Android Debug Bridge version 1.0.39
Madx's answer is a strong hint. Now I can make MTP work for my Ubuntu 20 and Nexus 5X (Android 8) device. MTP is an easy solution in Windows for smartphone users. However, to me and many Ubuntu/Linux users, current Ubuntu/Linux MTP tools "LOOK" messy and unstable for Android devices, e.g. No folder is shown for android phone in Nautilus.
Delving deeper I find it might be a security enhancement done by GOOGLE in the Android device/phone side. Direct internal data access remains a privilege for the developers. And one needs to set/reset MTP as a developer for Android device in order to make Ubuntu MTP tools work. There is nothing wrong with Ubuntu/Linux MTP tools.
The steps for MTP data access are an extension to Madx's answer:
(For Android device) Enable from Developers Options the Debug USB Mode.
Unplug the device from the computer.
3.1) Go to Settings → Storage, in the ActionBar, click the option menu and choose USB computer connection.
3.2) If you didn't find the 3.1) option then go to Settings → Developers Options → Select USB Configuration.
4.1) Select MTP connection.
4.2) Select Camera (PTP) connection.
4.3) Select MTP connection again. (This refreshs GOOGLE MTP protocol stack, I guess)
Plug the device and you should have a popup on the device allowing you to accept the computer's incoming connection, or something like that.
If it doesn't work try to toggle the Debug USB Mode in the Developers Options
And now file folders are shown up for N5X device in Nautilus.
Are these too much? There might be a bug in Android MTP implementation, and 4.2) & 4.3) are steps to WAKE Up Android MTP stack:-)
As a kind reminder, Windows and FTP are the last resorts for MTP.
Try executing :
sudo ./adb kill-server
sudo ./adb start-server
sudo ./adb devices
In my case:
The phone was connected as a media device.
Clicked on that message and got a menu. "USB computer connection"
In that menu chose to connect it as a camera (for devices that do not support MTP)
And then it worked.
Oh boy, I spent 3 hours for this simple thing and tried combination of above instructions.If it doesnt work for you, just try several combinations of above instructions and it will. I am on windows 7 and nexus 5. Issue I had was when I try to install driver from the google usb folder, windows 7 fails to install. Here are my steps:
-first uninstall all nexus drivers on windows 7. connect with USB cable, go to device manager and uninstall the driver; unplug the cable and repeat until no drivers are found and nexus shows up under "other devices" in device manager. I also configured nexus device as camera (PTP)
-follow #Dharani Kumar instructions. They make appropriate configuration changes for nexus device
-follow #Harshit Rathi instructions. They will ensure eclipse can show the device when windows detects the device
-unplug and replug the USB cable after a minute. Now you should see a pop up on nexus device. click it so that windows 7 will allow installing the driver from your local system. if you dont see this, restart your device or pc
-follow #Rick's instructions.you can download USB driver as listed by #jimbob
If you still have a problem, re read this entire thread and go from there (I spent hours on other web sites; those bits and pieces didnt help)
Go here and download and unzip to an easy location:
http://developer.android.com/sdk/win-usb.html#top
Download and install
I had the same problem, USB debugging enabled, device showing up in windows but I never got the question about RSA fingerprint when I connected my Nexus (6) device, nor did it show up in the Android Device Manager.
BUT
In the windows device manager I did have an entry saying it was an android device and Composite ADB interface etc. Still didn't work.
When I tried the previous tips about manually updating the drivers, Windows 8.1 just responded that "Windows has determined that the driver software for your device is up to date" this was not true. Looking at the driver details I saw that the driver was published by "ClockworkMod". I realized this must be because I had installed the Helium app sometime last year. So I uninstalled that, still had the same problem. Checked again, this time it was indeed google drivers, but version 7 published in 2012 (and not version 11 published 2014). I uninstalled these AS WELL and then tried the trick of reinstalling the driver from the SDK located in:
%localappdata%\Android\sdk\extras\google\usb_driver
Now when I replugged my device it finally works and can be debugged with Android Studio.
Indeed a driver problem.
Answer by Rick and MadX is the right way to do the steps (Thumbs Up for the answer)
In my case I am using
Akcess USB Type C Data Sync Cable For Nexus 5x, 5P - White
As Nexus 5x do not supply type C to usb cable I purchased it from some vendor.
Having the same issue. What I am doing stupidly is:-
I am connecting the cable in wrong way. After I reconnect it from upside down its working for me.
I might think that some of the Cables do not support debuggable. But its in my case.
This(Image) is my case the Type C should be as USB side symbol. A stupid solution, but work for me
I'm trying to set up my Nexus 7 (2013) for debugging, but I am getting stuck at the step where you install the USB driver. Here's what I've tried so far:
Steps taken:
Turned on debugging mode on Nexus 7 (2013)
Connected device to PC
Downloaded Google USB Driver at http://developer.android.com/sdk/win-usb.html (and unpacked it)
Opened Computer Management and tried to update drivers on Nexus 7 device
Directed the driver update wizard to the unpacked usb_driver folder with Include Subfolders checked (not the zip file nor the amd64 and i386 folders inside), but I get the message: "Windows could not find driver software for your device."
Installed Google USB Driver with Android SDK Manager
Used update driver wizard with path to usb_driver folder from SDK manager, same result.
Tried using "Let me pick from a list of device drivers" option on update driver wizard.
Picked "Android USB Devices", then clicked "Have Disk" button
Pointed to android_winusb.inf inside usb_driver folder, got message: "The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64-based systems."
I'm pretty much at my wit's end (I usually try to find answers myself or from other posts online, but this one's got me stumped pretty hard.) Can anyone help?
Don´t use USB3.0 ports ... try it on a usb 2.0 port
Also try to change transfer mode, like suggested here:
https://android.stackexchange.com/a/49662
cracked it after 2 hours...
download this usb driver:
http://dlcdnet.asus.com/pub/ASUS/EeePAD/nexus7/usb_driver_r06_windows.zip
2.go to the device manager , right click the nexus device and choose properties,
choose "hardware" and then choose update your driver , choose manualy and pick the folder
you opend the zip file to and press apply.
3.open your setting in nexus . go to : "about the device" , at to the bottom of the page and press it strong text7 times .
4.open the developers menu and enable debug with usb.
5.finally press storage from the setting menu and click the menu that apears at the top left corner.
press the connect usb to the computer, choose the second option (PTP).
one more thing: if that doesn't work restart your computer
that should do the trick , they couldn't make it more simple than that...
You can do this go to Settings > Storage, clicking on the setting menu icon in the top right hand corner and selecting "USB computer connection". I then changed the storage mode to "Camera (PTP)". Done try re installing the driver from device manager.
The universal adb driver installer worked for me. I went from an HTC to a Samsung to a LG Nexus. The drivers are all over the place for me.
http://adbdriver.com/
I also got this problem and found quite simple solution.
I have Samsung adb driver installed on my system. I tried "Update driver" -> "Let me pick" -> "Already installed drivers" -> Samsung adb driver. That worked well.
Depending on the device, sometimes you are getting "The folder you specified doesn't contain a compatible software" error because the first interface isn't actually the ADB interface.
Try installing it as a generic "USB composite device" instead (from the 'pick from a list' driver install option); once the standard composite driver installs it will allow Windows to communicate with the device and detect the associated ADB driver interface and install it properly.
SkipSoft.net has some great toolkits. I ran into a similar problem with my Galaxy Nexus.... Ran the corresponding toolkit, which configured my system and downloaded the correct drivers. I then went into Windows Hardware manager after connecting the phone... Windows reported the exclamation that it couldn't find the device driver, so I ran update, and gave it the drivers directory the toolkit had created... and everything started working great. Hope this helps :)
Asus Nexus 7 on my Windows 7 64 bits computer for development purposes :
I tried to install the driver for the nexus 7 manually like explained in the official tutorial of Asus
Unfortunately, I had an error, Windows couldn't recognize the driver.
I tried to change the USB connection mode to PTP or MTP by going in the storage menu and clicking on the top right menu . In both cases, windows recognize the devices but it still didn't work in debugging mode.
The only way it worked for me is by installing : adb universal installer . I scanned it before clicking on the executable, it seems to be fine.
I am attempting to install an Android app on my brand new Nexus 10. I have a .apk file. I have downloaded the Android SDK, installed "Android SDK Tools", "Android SDK Platform-tools", and Google USB Driver. I have checked the setting on my Nexus 10 for "Unknown Sources".
When I run "adb devices" from the command terminal, it doesn't list any devices. I attempted to follow this recommendation, because it was identical to a suggestion I had previously found here on Stack Overflow. After following those steps, "adb devices" still returns an empty list and to make it worse, when I connect my Nexus 10 to my PC, Windows doesn't show any folders within the device.
I have undone the steps in that link, along with everything else I have done so far, as well as uninstalling my Nexus 10 from Device Manager and reinstalling it, but I am still not seeing any folders in the device.
Is there anything I am missing to get my device to show up in ADB devices?
What can I do to get Windows to see the folders within the device?
Windows 8 wouldn't recognize my Nexus 10 device. Fixed by Setting the transfer mode to Camera (PTP) through the settings dialogue on the device.
Settings > Storage > Menu > USB Computer connection to "Camera (PTP)"
For Windows 8 users:
After trying every solution given here, with no success, I found this:
Go to Device Manager
Browse my computer for drivers -> Let me pick from a list of device drivers on my computer
Choose Android Device and then Android ADB Interface.
Now I have my devices listed at adb devices.
This situation seems to arise with some ADB drivers. I have encountered the same thing with a couple of Google devices and installing the Universal ADB windows driver has fixed it for me every time.
Use another cable.
Just found out that one of my regular charging cables had Vcc, Gnd pairs, but no Data+, Data-.
https://en.wikipedia.org/wiki/USB#Pinouts
Make sure to Enable USB debugging in Settings -> Developer options
Also, run "adb devices" after getting into the platform tools folder in the Android SDK (unless you have that folder on your system path already), otherwise the command won't be found.
The device may not be visible for debugging if it is in MTP mode. Some devices only work in PTP mode (or even in "charging only" mode).
This can be changed in Settings > Developer Options > Networking > Default USB configuration > PTP.
Also, you'll get a notification on your android device asking you for confirmation about USB configuration setting change and to allow it.
Note: You can turn on developer options by following the link below:
enable developer options
I have found a solution (for Windows 7):
Connect your Nexus 10 to PC
Go to Windows Device Manager
RClick on ADB Interface -> properties
Details -> Hardware Ids.
You will see two records like these:
USB\VID_18D1&PID_4EE2
USB\VID_18D1&PID_4EE2&MI_01
5 Open the android_winusb.inf file (I have it in "C:\Users\<username>\AppData\Local\Android\android-sdk\extras\google\usb_driver" directory)
6 Create such records in [Google.NTx86] and [Google.NTamd64] sections using Hardware Ids from properties of ADB interface:
;Google Nexus 10
%SingleAdbInterface% = USB_Install, USB\VID_18D1&PID_4EE2
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_4EE2&MI_01
7 Save the file, and update driver for ADB Interface with showing the path to "C:\Users\\AppData\Local\Android\android-sdk\extras\google\usb_driver" directory
Sometimes ADB loses connection to the device, and needs to be reset. If you have everything else working (ie USB driver installed, Developer settings enabled on the device), and still can't see your device, you need to reset the ADB process.
This is available in the DDMS Perspective (from within Eclipse), Devices tab (the triangle on the far right includes a menu item to perform the reset).
Otherwise from the command line, you can reset it with the following 2 commands:
adb kill-server
then
adb start-server
Enable Developer options in your device. To enable the developer mode, setting->About phone, tap Build number option 8 times continuously
Go to Settings-> Developer options and Turn on USB debugging
From the above steps it didn't work try this step, Go to Settings->Security and turn on Allow Unknown Resources
You have to download the drivers from the SDK manager (extras → Google USB Driver)
Then you have to install the USB driver in Windows (it works for me in Windows 8.1):
(Copy and paste from http://developer.android.com/tools/extras/oem-usb.html#InstallingDriver:)
Connect your Android-powered device to your computer's USB port.
Right-click on "Computer" from your desktop or Windows Explorer, and select "Manage".
Select "Devices" in the left pane.
Locate and expand "Other device" in the right pane.
Right-click the device name (such as Nexus S) and select "Update Driver Software." This will launch the "Hardware Update Wizard".
Select "Browse my computer for driver software" and click "Next."
Click "Browse" and locate the USB driver folder. (The Google USB Driver is located in <sdk>\extras\google\usb_driver\.)
Click "Next" to install the driver.
After downloading the Google drivers via Android SDK Manager (available via Eclipse, Intellij or Android Studio), I had to update the driver in Computer Management > Device Manager > Other Devices > ADB - right clicking and clicking on update driver and browsing for updated driver finally did the trick.
BTW, a total nightmare for me as well. I continue to be bewildered that setting up a dev environment should be the most difficult task imaginable, with each new inexplicable failure leading to another one. Jeesh! Good luck.
On my Windows 8.1 64bit (Nexus 5 did not show up), only manually installing the USB driver fixed it:
http://developer.android.com/sdk/win-usb.html
The "Google USB Driver" in "Android SDK Manager" was installed already.
I still get this once in a while and it usually works if I unplug it and plug it back in a different port. I'm on Linux but had the same thing happen on Windows before.
Installing Samsung Kies and using their tool to reinstall device drivers, is what finally worked for me with my Galaxy S3 and Tab S 8.4
Normally SDB will download the driver in the **android-sdk-windows\extras\google\usb_driver** path
Here are the steps that worked for me:
Enable USB debugging.
Do to device manager, right click on ADB device and click update driver software.
Select "Browse my computer for Driver Software"
Select "Let me pick from list of Device drivers on my computer"
Click on "Have Disk" option.
Select the driver path **android-sdk-windows\extras\google\usb_driver** (path of sdk)
7.Select 1st driver out of list of drivers shown.
And hopefully, it will work.
Edit: I recommend you DO NOT run ADB under VirtualBox if you are using a Windows Host. Somehow I got VirtualBox to lock the device drivers on the host, eventually making it so that the ADB wouldn't work on the client nor the host for any device I plugged in. To fix, I removed VirtualBox extensions on the host and ran http://www.nirsoft.net/utils/usb_devices_view.html to delete the incorrect drivers. I could not get the correct drivers to load while VirtualBox extensions were installed, and this problem was a complete bastard to diagnose and fix.
Edit 2: Also the following is probably out of date, now that Google have released an integrated ADB extension for Chrome.
What an installation nightmare... Here are the steps I needed to get my Nexus 10 recognised on an XP virtual machine running under VirtualBox:
If you get asked to install Nexus 10 drivers, make sure to untick "don't ask again" (you WANT to be asked again!).
Plug in the Nexus 10 USB connection
Turn on debugging in the Nexus 10 settings Developer menu (tap "About Tablet" 7 times to get that menu).
In your virtual machine settings (host), add the samsung Nexus 10 device to the USB Device Filters (important - selecting it from the devices menu didn't seem to work).
In guest install java jre (if you don't have java installed). In Control Panel, change Java settings so that java doesn't run in the browser (to help prevent security issues).
In guest get the adk zip file and put it somewhere permanent. I needed to delete the .android config directory from the user directory because I moved the directory.
Run the SDK Manager.exe - if it doesn't work, try running sdk\tools\android.bat which seems to give better error reporting.
From SDK Manager install the Google USB driver package.
Unplug the Nexus 10 and plug it in again, and install the Google USB driver package.
Restart the guest.
running c:>[...]\sdk\platformtools> adb devices finally shows me the device...
For the Blu Studio 5.5s ADB drivers, you have to go through this hoop. I am certain it is the same with all Blu phones or maybe for all non-Google mfg phones, I am not sure. First of all if you connect the Blu device with USB cable and USB Debuggin off, you will see that Windows 7 loads a generic driver for you to copy on/off files to the phone and SD storage. This will appear when the USB cable is first plugged in and appears as a device icon under Control Panel, Device Manager, Portable Devices, BLU STUDIO 5.5 S (or the device you are working with). Do not bother getting the hardware ID yet - just observe that this happens (which indicates you are good so far and don't have a bad cable or something).
Go to the phone and switch on USB Debugging in the Developer section of your phone. Notice that an additional item appears as an undefined device now in the device manager list, it will have the yellow exclamation mark and it may have the same name of the phone listed as you saw under Portable Devices. Ignore this item for the moment. Now, without doing anything to the phone (it should be already in USB debug mode) go back to the Portable Devices in Device Manager and right-click the BLU STUDIO 5.5 S or whatever phone you are working with that is listed there without the exclamation mark (listed under Portable Devices). Right click on the icon under Portable Devices, in this example the name that appears is BLU STUDIO 5.5 S. On that icon select Properties, Details, and under the pull down, select Hardware IDs and copy down what you see.
For BLU STUDIO 5.5 S I get:
USB\VID_0BB4&PID_0C02&REV_0216&MI_00
USB\VID_0BB4&PID_0C02&MI_00
(Note if you do this out of turn, the HW ID will be different with the phone USB debugging turned off. You want to copy the value that it changes to when the USB debugging is ON)
Now do as the instructions say above, of course customizing the lines you add the the INF file with those relating to your own phone, not the Nexus 10. Here is what to customize; when you downloaded the SDK you should have a file structure expanded from the ZIP such as this:
\adt-bundle-windows-x86_64-20140321\sdk\extras\google\usb_driver
Find the file named: android_winusb.inf in the usb_driver folder
Make a copy of it and name it anything, such as myname.inf
Edit the myname.inf and add the lines as instructed above only modified for your particular phone. For example, for the BLU STUDIO 5.5 S, I added the following 2 lines as instructed in the 2 locations as instructed.
;BLU STUDIO 5.5 S
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C02&REV_0216&MI_00
%CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C02&MI_00
Note that you add these lines to both the 32 and 64 bit sections, matching how the example in the tutorial reads.
Now go back up to the unknown device that appeared in Device Manager when you switched on device USB debugging and right click on this item (has yellow exclamation mark), right click on it and then select Update Driver Software, and then Browse My Computer, Let Me Pick, click on the Have Disk button and browse to find the myname.inf. Continue to agree to all the prompts warning you it might not be the right driver. As the final step, Windows should have identified the device as Android ADB Interface and once that is done, you should be able to go back, open your CMD window and run the command "adb devices" as instructed in this tutorial and now you should see that the phone is now discovered and communicating.
Now you can go have fun with the adb command.
At first Thanks #rmsyk's post.
For my issue and after long time suffering with Meizu C9 Pro witch require just android ADB drivers (no special drivers) referring to manufacturer and it solved in my Windows 7 PC by the bellow steps.
Make Sure to
Install latest version of ADB & Fastboot with the needed drivers.
Enable Developer options & USB Debugging.
Enable Media File Transfer (MTP Mode).
Manually replace C:\Users\USERNAME\.android with the folder included here ,Then kill process 'adb.exe' if found from Windows Task Manager and use adb devices and finally my device listed successfully and just confirm the PC as trusted.
Notes:
Android Studio was uninstalled in earlier time and also i tried to reinstall but was not a solution at all.
Tried adb kill-server & adb start-server but was not a solution too.
As well as the usual settings (enable USB debugging) I also had to select Enable OEM unlock in the Developer options.
This supposedly makes the device less secure, but it's your device and you know what you want to do.
Once checked the device behaved as expected and appears in the adb devices list.
You can always reverse all these settings once you're finished.
Confirm you have the correct platform SDK tools
For Windows 10, had to manually download the latest platform SDK tools from Android as the version supplied through Visual Studio 2017 EMDK for Xamarin was not sufficient. Everything else except adb.exe devices worked.
https://developer.android.com/studio/releases/platform-tools
After the platform tools were manually downloaded, device showed up regardless of USB configuration (charging, MTP, etc.)
Installing an emulator device at this stage is also helpful to see whether the problem is with adb or your physical device.
List of devices attached
12345D1234 device
emulator-5554 device
There could be two reasons why adb devices command is not working for you. Either your phones USB drivers are not installed properly or you have not enabled USB debugging mode.
I created a tool that makes installing USB drivers a one click thing.
Just connect your phone in USB debugging mode to PC.
Run my tool
It will detect and install drivers specific to your phone and also install the latest ADB & Fastboot binaries with it.
The tool is available at my GitHub Repo
It's so easy, just turn off your Android device, and then hold down both "Volume Down" key and "Power" at the same time. Wait a few seconds till it start in recovery mode, done.
Now type adb devices, and you'll see your device.
I had the same problem with my Windows 8. The Android/SDK USB driver was installed correctly, but I forgot to install the USB driver from my phone. After installing the phone USB driver ADB works fine.
I hope this will help.
Turn on debugging in the Nexus settings Developer menu (tap "About Tablet" 7 times to get that menu).
Freaking Google tricks!
Have you had an android update recently? I updated to Lollipop and all the sudden I had no adb devices. Boo! I spent awhile trying a few things to no avail. Then I went into my developer options and lo and behold, "USB debugging" had been turned off. Silly Google. After turning it back on, it immediately showed up and I'm back in business!
GoTo DeviceManager, then right click on the android device and click uninstall driver.
Unplug and plug the device back...then a pop will come on your device while your pc installs the required drivers. Click "allow" on the popup.
You can see your device when you type "adb devices" in command prompt.
For Windows, just end all the processes related to Blue stacks or any such emulator if you are using.
Worked for me.
There's obviously a ton of different problems that could be causing this (and a ton of different solutions to go along with those problems). So think about all the solutions!
If you've gotten this phone and computer pair to work together before, but they aren't working any more, it might be a specific program on your computer rather than a problem on your phone. Some programs install/use their own adb, and only one of these can connect to your phone at a time. I think this makes a race condition, so sometimes it'll connect fine.
Some programs that run adb:
HTC Sync Manager - uninstall this.
chrome://inspect - lets you view localhost on your phone. Just close the window when you're done with it.
To have ADB in MTP mode
If you don't find any ADB device (nothing with exclamation mark) in the device manager (with all developers settings on phone checked), do this:
In Device Manager :
UpdateDriver->Manuel Install->Search on my computer->Select from installed driver list -> then select the one with the word usb in it (not MTP).
Edit: after that, you'll then have 2 or 3 peripheral, one for USB and one for ADB, install adb driver using usual method (see first answers)
For my Nexus 6P downloading drivers from Google helped resolved the issue. Here is the URL with documentation. And here you can download the driver itself.
P.S. I saw some people advice to download some drivers from random places on internet. While this might help it's too dangerous in my mind to download unknown drivers from unofficial places. So the one from Google worked well for me :)
I'm running on Windows 7, and I've updated all the drivers as it says on the Android developer website regarding using hardware devices. However, Eclipse is still not recognising my Nexus 4 when I try to run the application. The Android device chooser pops up, but it doesn't show anything on the hardware section. I've turned debugging, third-party apps, and mock locations all on on my phone as well.
Is this because the phone is still new? Is there a way of making my Nexus work with Eclipse?
Nothing is showing up under ADB devices in the command prompt.
I had a similar sounding situation with my Nexus 4. For me it was an issue with the drivers Windows was installing automatically. I followed the instructions in [Q]Computer won't recognize phone? - Post #8. I had some slight differences on Windows 7.
For me I,
Uninstalled the driver from Device Manager
Let it automatically install the generic 'MTP device driver'
Right clicked on the new device and selected 'Update Driver'
Selected 'Have Disk' and pointed it to [android-sdk-dir]\extras\google
Watched an 'ADB' driver install.
Opened Eclipse to successfully run on my Nexus 4.
Just to confirm a previous comment. I needed to switch my connection to Camera (PTP) mode in addition to enabling Developer options and then selecting USB Debugging from the newly appeared Developer Options.
To enable USB debugging, go to settings, about phone and then at the bottom tap build number seven times. This will enable the developer settings where you can enable USB debugging.
To fix/install Android USB driver on Windows 7/8 32bit/64bit:
Connect your Android-powered device to your computer's USB port.
Right-click on Computer from your desktop or Windows Explorer, and
select Manage.
Select Devices in the left pane.
Locate and expand Other device in the right pane.
Right-click the device name (Nexus 7 / Nexus 5 / Nexus 4) and select Update
Driver Software. This will launch the Hardware Update Wizard.
Select Browse my computer for driver software and click Next.
Click Browse and locate the USB driver folder. (The Google USB
Driver is located in <sdk>\extras\google\usb_driver\.)
Click Next to install the driver.
If it still doesn't work try changing from MTP to PTP.
I had the same problem, but I didn't want to change to PTP mode. This is how I fixed it with MTP still enabled.
Uninstalled Google USB Driver from Eclipse in the Android SDK Manager.
Uninstalled the driver from Device Manager - click box for "delete driver from my computer"
Unplugged and re-plugged my phone into the computer.
Windows "improperly" installed drivers for the Nexus 4.
The Nexus 4 was now showing up in My Computer like a drive.
Reinstall Google USB Driver in SDK Manager.
Update Nexus 4 driver in Device Manager.
Everything works.
I had the same problem and none of the above worked, but the following solution worked for me:
On my Nexus 4:
Go to Settings
Choose Developer options (from the end of the list after pressing seven times on "About phone")
Check the "USB debugging" and press OK.
For what it's worth, in my case I was able to fix the problem simply by changing my USB connection mode from Media device (MTP) to Camera (PTP).
I had to resort to a clean install of Windows 7 x64 to fix this issue.
I tried all steps/variants in the other answers. No luck. Device Manager would show my 'Android Device / Android Composite ADB Interface' working properly with the 7.0.0.1 driver from Google, but nothing could get 'adb devices' to show my Nexus 4.
I used USBDeview to uninstall every USB device that had connected to my computer except my keyboard and mouse. No luck.
I enabled 'Show hidden devices' in Device Manager and uninstalled anything related to USB. No luck.
I added Google's vendor ID to adb_usb.ini. No luck. I deleted adb_usb.ini and ran 'android update adb'. No luck.
I brought my Nexus 4 to my brother's apartment to confirm it wasn't faulty. Worked on his machine without a hiccup.
I'm glad the clean install worked, because further troubleshooting was going to require swapping motherboards or buying a MacBook.
Boy, that escalated quickly.
Changing USB mode from MTP to PTP worked for me.
How to do it on Windows 8 (I think, it will work for Windows 7 too)
Open Android SDK Manager and delete Google Usb Driver
Open Control Panel -> Devices Manager -> Find your Nexus -> right click -> delete device
Unplug your device
Open Android SDK Manager and install Google Usb Driver
Connect your device
Open Control Panel -> Devices Manager -> Find your Nexus -> right click -> update drivers -> Manual update -> open android-sdk folder (enable checkbox for subfolders) -> install driver from Google Inc
adb kill-server; adb start-server; adb devices should show your nexus
Do not forget, that Android 4.2 now want you to submit RSA key from your computer, look at your device screen.
To enable developers options on Android 4.2: Open Settings -> About phone -> Tap on Build Number 7 times.
Just to add to the above posts for anybody struggling to get their Nexus 4 recognized by Eclipse - ADT. In the past the device was recognized by Eclipse ADT without any issues!
I ran into the same problems as the original question. Every approach I tried wouldn't work...
Toggling "USB debug" selection
Toggling "Allow 3rd party" apps selection
Allowing Mock locations
Reinstalling driver
Restarting adb.exe
Simple solution in the end
Go to Settings -> Storage -> USB Computer Condition (Menu option from Storage Screen)
Change from Media Device (MTP) to Camera (PTP)
You need to install USB drivers only if you use Windows (If you're using MAC/Linux, most likely it will work fine without any driver installations)
in the following link they describe how to do it:
http://developer.android.com/tools/extras/oem-usb.html
In short:
Connect your Android-powered device to your computer's USB port.
Right-click on Computer from your desktop or Windows Explorer, and select Manage.
Select Devices in the left pane.
Locate and expand Other device in the right pane.
Right-click the device name (such as Nexus S) and select Update Driver Software. This will launch 6. the Hardware Update Wizard.
Select Browse my computer for driver software and click Next.
Click Browse and locate the USB driver folder. (The Google USB Driver is located in \extras\google\usb_driver.)
Click Next to install the driver.
My symptoms were the composite device (this contains all of the actual USB devices such as the ADB interface, camera, etc) was not being installed. This has a hardware id of:
USB\VID_18D1&PID_4EE6&REV_0228
USB\VID_18D1&PID_4EE6
The composite device's children will have &MI_## after them. If you see those, then this is not the same issue.
I resolved this by coping usb.inf to %windir%\inf from a virtual machine of Windows 7. The hardware detected and installed fine after.
I have 2 Nexus 4 devices. One was connecting to ADB without any problems, the second one never showed up when I used the adb devices command. An additional symptom was, that the second phone did not show up as a portable device in Windows Explorer when the phone was set to Media mode.
At some point I found that a temporary solution for the second Nexus was to switch it to PTP mode. Then it was found by the adb devices command. The weired thing was that the first phone worked in both modes all the time!
Finally I found this solution that now allows me to connect both phones in both modes:
set USB mode of the phone to MTP (Media)
Using PC device manager uninstall the device ->Android Device ->Android ADB Interface
Make sure to check the box "Delete the driver software"!
then set the USB mode of the phone to PTP (Camera)
Using PC device manager uninstall the device ->Portable Devies ->Nexus 4
Then unplug the USB and plug it back in (ensuring that its set to MTP (Media) and I found that the device was correctly registered in Device manager as a ->Portable Devies ->Nexus 4
Solution found at: http://forum.xda-developers.com/showthread.php?p=34910298#post34910298
If you have a similar problem to connect your Nexus to ADB then I recommend to first switch it to PTP mode. If your problem vanishes with that step, I recommend to go through the additional steps listed above as MTP will probably be the mode you will want to set your phone to most of the time.
Follow Google's instructions for this, OEM USB Drivers.
In case none of the answers work perhaps the following clarifications will help. I followed the top answer and tried to load the program with ADB from the command line to reduce the possible complications and this did not work.
Once enabling PTP mode the ADB devices command would find my Nexus 4, but I could not push to it. I had to use Eclipse and in order for the dialog to display to accept the RSA key described below.
Note: When you connect a device running Android 4.2.2 or higher to your computer, the system shows a dialog asking whether to accept an RSA key.
On Windows 7, with Samsung Nexus S, it showed nothing in Device Manager, the adb devices command showed no devices, but when plugged in device said USB debugging was on and connected.
I used Andrea's Feb 2 answer to install the Google USB driver, which created the /gooogle/usb_driver directory and used RobertNovelo's Mar 7 answer to go to the link and follow the instructions. The device showed up in Device Manager under 'other'. I right clicked on it and selected update driver, and now it shows up in Device Manager under 'Android device', and now command line adb devices lists it.
I had a similar problem, and none of the previous solutions worked for me, and I've just solved it by myself (after a few hours of frustration), so I'm going to share my solution.
My computer suddenly stopped recognizing any Android device I've plugged in after it installed Android Composite ADB Interface for my Nexus 4. I was not able to uninstall the driver, because any attempt to do so by Device Manager was unsuccessful (Device Manager stopped responding every time).
So I've solved it this way:
Switch Windows into safe mode
Uninstall Android Composite ADB Interface
Install old SAMSUNG Android ADB Interface
Switch Windows into normal mode
Plug-in Android device (Nexus 4 in my case)
Windows recognized the device as Nexus 4
Install driver from android-sdk/extras/google folder
Everything works again! :)
I have a way to fix your problem:
Download Nexus Root Toolkit v2.0.4: http://www.wugfresh.com/nrt/
Install and select your diver and choose the Google API. For example, I chose Nexus 4 and selected Google API 4.4.4
Click "full driver installation guide..." and click step 3 tab. Choose the Google drivers.
My Windows 7 installation was not finding a driver at all. The xda-forums post has the right folder to tell Windows where the drivers are -- {SDK directory}/extras/google/usb-driver.
If you don't have the extras/Google folder + Tim Bellis, go to the SDK Manager in your IDE and look for the Google USB driver in the Extras category, and install it. I cannot tell you how to do this in Eclipse, but if you have IntelliJ IDEA, it's near the bottom of the list, checkmark it and click "Install packages".
(Windows 7) My solution to this was to find the device in Device Manager, uninstall the existing driver and install a new one from the android folder in your user account using the include subdirectories option.
All the best.
Some of you may have experienced this issue. If you don't find the USB driver (like me, I downloaded a bundle of Eclipse and the Android SDK), go to <sdk>/SDK Manager. Open it and select USB Driver from the options to install and you are ready. I had to do the PTP mode too.
If you have problems to install the ADB driver under Windows 8.1, try this solution: ADB Driver and Windows 8.1
For me, it was Nexus 4 and Windows 7. I reinstalled the drivers, changed to PTP - basically went through everything.
Clicking the tab that said MainActivity.java rather than activity_main.xml in Eclipse fixed it for me.
My solution is very silly. I had tried all the solutions above and wasted so many hours. Then I found out the solution when I browsed developer options. I didn't check mark the "USB debugging" option. The silly me assumed turns on developer options mean turns on USB debugging, but I was wrong.
It was a driver missing problem with me. I had enabled the USB debugging, tried changing the USB cable, tried reinstalling the Google USB drivers, but nothing came to my rescue.
Then ultimately I downloaded the device drivers as suggested here.
To make sure whether you have a device driver problem, go to:
Computer->right click
Manage
Device Manager
And see if you have your Nexus shown as an "Android device" or as a device in "Others".
If it shows in "Others", your problem should be resolved by downloading & extracting this and then following these steps:
Right click on your device after finding it in Device Manager as per the above mentioned three steps.
Say Update driver software.
Say Browse My computer for driver software
Pinpoint it to the location where you had downloaded the drivers from the above link.
Finally, your device will show up as follows:
As soon as you do this, a popup will show up on your device asking for permission to debug. Once you accept, you are ready!