This question already has answers here:
in android studio my phone in device chooser not showing
(3 answers)
Closed 5 years ago.
I have run android application on real device but suddenly now when i connect my device to my android device android studio is showing "No USB devices or running emulator detected " even debuger option is turned on
I do not know what is the problem can any one help?
I also faced same issue and follow these steps and got resolved.
1. enable Developer mode in Device.
2. Go to ABD interface (With error)from the start menu . some time windows os fail to load device driver.
3. and load http://adbdriver.com/downloads/ and download driver. unzip and run.
4. now go to android studio every thing is fine now.
You can use ADB over network but your device must be rooted
1- Open your device's terminal and type;
su
setprop service.adb.tcp.port 5555
stop adbd
start adbd
2- Open the Android Studio's terminal section and type;
adb connect {your devices ip addres}:5555
for example adb connect 192.168.1.22:5555
This question already has answers here:
ADB is not recognizing my device
(3 answers)
Closed 3 years ago.
Here I am using HTC Desire 626 G+ to debug android application. Last week I formatted my pc and install windows 10 for it. Then I install android studio and android SDK and all necessary components and Universal Windows ADB Driver . Then I connect my android device but it did not recognized by ADB. I first thought was something wrong with my device and cable. Then I change both and try to debug but result was same.
I want to say a word about Universal Windows ADB Driver. Before it works fine for me but now not. I also contact the HTC support center and I asked do I want to install driver to debug. But they specify that there is no drivers for my device.
I also follow questions regarding on this topic in stackoverflow.
But I did not able to debug.
Also in my device manager show my android device as a unrecognized device.
Then I try to install google usb drivers in Android SDK but it fail to install to my device.
Then I try to install Universal Windows ADB Driver to device in device manager. But It also fail.
What should I do now. I am really helpless ??
try to set the USB connection mode of your device from a Media Device (MTP) connection to a Camera Device (PTP) connection
https://software.intel.com/en-us/xdk/docs/configuring-your-windows-usb-android-debug-connection-for-the-intel-xdk
http://www.howtogeek.com/192732/android-usb-connections-explained-mtp-ptp-and-usb-mass-storage/
I just upgraded my Android device to 4.4.2 and now Eclipse will not be able to choose a running Android device when I want to run my project. The Android Device Chooser shows my device up with a serial number as "????????????" and Target as "unknown" and State as "??". Additionally, I have enabled Developer Options with USB Debugging.
what os are you using. i see that on my linux box with some devices. i normally kill adb and restart it as root and the devices shows up and works correctly. found that solution years ago on stack overflow or something like that. not sure if the same thing is needed with windows/osx. on linux, assuming adb is in your path:
$ killall adb
$ sudo adb devices
otherwise os you're trying to connect it to and the specific device information would probably be helpful in tracking it down.
I have a few suggestions. Try them in this order until it works.
Reboot the phone.
Try turning off and then back on "USB Debugging" on your phone (in Developer Options probably).
open cmd > go to the your Android SDK directory > type cd platform-tools > type ./adb kill-server > then finally type ./adb start-server
References:
Eclipse - Target "unknown" in Android device chooser
Android device chooser - My device seems offline
The solution for my device after updating was to completely uninstall the device driver from device manager and reinstalling it. I am using windows and my mobile was shown as Android Phone and not as Nexus 7. Home it helps someone.
I use "adb devices" to get following result. Only one device is connected to PC by USB, but we get 8 lines of result.
Could anyone suggest the reason?
WH96TNE00361 offline
WH96TNE00361 offline
WH96TNE00361 offline
WH96TNE00361 offline
WH96TNE00361 offline
WH96TNE00361 offline
WH96TNE00361 offline
WH96TNE00361 offline
Try the following:
Unplug the usb and plug it back again.
Go to the Settings -> Applications -> Development of your device
and uncheck the USB debugging mode and then check it back again.
Restart the adb on your PC.
adb kill-server
and then
adb start-server
Restart your device and try again.
To complete the previous answers, another possible solution is to change the USB socket in which your cable is plugged in.
I had this problem (with the classical answer about using adb kill-server / start-server not working) and it solved it.
Actually, it took some time to find that because Windows was correctly recognizing the device in my first socket. But not ADB. As Windows was recognizing the device, I had no real need to test other USB physical sockets. I should have.
So you can try to plug the cable in all your USB physical sockets directly available on your computer. It did worked for me. Sometimes the USB sockets are not managed the same way by a computer.
Beginning from Android 4.2.2, you must confirm on your device that it is being attached to a trusted computer. It will work with adb version 1.0.31 and above.
adb kill-server
adb start-server
that solved my problem
I've had a similar issue with one of my phones.
I was unable to connect and use usb debugging on any of my computers.
In the end, I had to restart the usb debugging on the phone manually [doing so using the Developer menu was not enough].
There's only one command you have to run on your phone [I did it using Terminal Emulator app]:
adb usb
And that was it.
Hope this helps someone in the future.
You may also try downloading newest version of adb http://developer.android.com/tools/help/adb.html
Reboot the device. This always fixes it on Mac OS, whereas adb kill-server does not.
On my Galaxy Nexus with Android 4.2.2, I had the same problem initially, 'adb devices' was showing the device but with offline status (USB debugging was initially active on my device).
These are the steps I took to remedy the situation :
Disable USB debugging (Device not connected to PC)
Re enable USB debugging
Now connect to your PC, now a pop up on the device (not on PC) will ask you for authenticating the PC, Thats it...
adb devices now lists both device id and no offline.
I post here my question just in case is helpful for somebody else.
My problem was that my colleague was connected to the same device and I was not able to connect to the same device.
Note: I had this problem with Amazon Fire TV connecting over Wifi.
There are 2 solutions:
Easy to "drop" his connection (sorry buddy :)
Restart the device
adb kill-server
adb start-server
adb connect device-ip
A bit more difficult but two clients can use the same device (use different TCP ports)
Please look at this answer
For me with Android 4.1.1 only rebooting device works
Run SDk Manager and install Android SDK Tools and Android SDK Platform-tools updates. ADB must be updated to a new version for 4.2.x
I had the same issue and none of the other answers worked. It seems to occur frequently when you connect to the device using the wifi mode (running command 'adb tcpip 5555'). I found this solution, its sort of a workaround but it does work.
Disconnect the usb (or turn off devices wifi if your connected over wifi)
Close eclipse/other IDE
Check your running programs for adb.exe (Task manager in Windows). If its running, Terminate it.
Restart your android device
After your device restarts, connect it via USB and run 'adb devices'. This should start the adb daemon. And you should see your device online again.
This process is a little lengthy but its the only one that has worked everytime for me.
Had this on client's machine it turned out he had an out of date version of adb installed via website offering adb and fastboot. The client in question didn't want to install the whole SDK because of perceived bloat :S .
So if you're seeing offline make sure you've downloaded and using the latest adb. I ended up emailing him adb executable.
Also worth checking that the adb you are using is the correct one in the Path. i.e on Mac
$ which adb
/Users/me/dev/adt-bundle-mac-x86_64/sdk-macosx/platform-tools/adb
if non of the steps work from the above. my device still offline after connected through wifi. i did the following:
go to your device...
go to settings.
go to developer options.
Allow adb debugging in charge mode only.
repeat the steps as you always do . which is:
a. connet your usb on chargemode only.
b. open command write:
- adb tcpip 4455
- adb connect 192.168.1.11:4455
b. disconnect usb.
now everythings work for me .
make sure the device is set for usb debugging
Have the adb client running (e.g. via "adb usb" or adb start-server"
LEAVE the device connected via usb!!!
AND THEN reboot the device.
This always brings my Motorola MB525 "online" again, after adb complains it would be "offline". I'm using OSX btw.
I made adb working on Android 4.4.2 with GT-N8010 (Samsung tablet) after setting device in authorized mode once upgraded adb to SDK version.
~/local/opt/Android/Sdk/platform-tools/adb
Android Debug Bridge version 1.0.32
While It did not work using :
adb version
Android Debug Bridge version 1.0.31
Shiped in Ubuntu LTS version :
apt-cache show android-tools-adb | grep Version
Version: 4.2.2+git20130218-3ubuntu23
This link may help then
Can't connect Nexus 4 to adb: unauthorized
After wasting hours on it, I have updated my version of adb and now adb devices shows my device online and I can run the app on it again.
also make sure adb isn't running in your processes automatically. If it's there right click open file location, figure out what is starting it, kill it with fire. Run the updated adb from an updated android sdk platform tools. This was the issue with mine, hope it helps someone.
What did me in is was that multiple unrelated software packages just happened to install adb.exe -- in particular for me (on Windoze), the phone OEM driver installation package "helpfully" also installed adb.exe into C:\windows, and this directory appears in %PATH% long before the platform-tools directory of my android SDK. Unsurprisingly, the adb.exe included in the phone OEM driver package is MUCH older than the one in the updated android sdk.
So adb worked just fine for me until one day something caused me to update the windows drivers for my phone. Once I did that, absolutely NOTHING would make my phone status change from "offline" -- but the problem had nothing to do with the driver. It was simply that the driver package had installed a different adb.exe - and a MUCH older one - into a directory with higher precedence.
To fix my installation I simply altered the PATH environment variable to make the sdk's adb.exe have priority.
A quick check suggested to me that "lots" of different packages include adb.exe, so be careful not to insert an older one into your toolchain unintentionally.
I must really be getting old: I don't ever remember such a stupid issue taking so endlessly long to uncover.
Check that the ADB version that you are running is newer than the version of the OS on the connected devices. For me, updating the ADB helped to get the device online.
I am running Android SDK 2.2 and am trying to get the adb to connect to the Google Nexus One phone. Its a new phone, shipped straight from Google - haven't installed any apps on it yet.
(I have Windows XP)
Here is what I have done so far:
Followed the instructions on setting up the device for development as given on the Android Developer's site:
http://developer.android.com/guide/developing/device.html
added android:debuggable="true" to my application manifest
USB debuggable is checked on the phone
downloaded the Device Drivers For Windows Revision 3 (this supports Nexus One phones)
Went through the Hardware Installation wizard to install the device - the device shows up as "Android Composite ADB Interface".
When I run adb devices on the shell, the device appears for a moment, then disappears.
On the Eclipse console, I get the following message:
[2010-11-13 11:54:42 - DeviceMonitor]Failed to start monitoring
I have rebooted the pc several times, uninstalled and reinstalled the drivers several times, but I get the same error each time. As I was researching this problem, someone had recommended rebooting the phone. I am a bit confused by that - is that a soft or hard reboot? Do I just power the phone off/on and is there something more complex involved? Do I have to hard reboot it to reset to factory version - even though its brand new?
Has anyone run into a similar problem? Any help on this would be great.
I can't test my application on the device if the adb cannot view the device. Thanks so much in advance.
I had this same problem. To get it working, do the following:
Close Eclipse
Open Task Manager and kill the adb.exe program.
Re-open Eclipse (Eclipse will automatically restart the adb.exe service)
Run adb devices from a command prompt and you should see something like the following:
C:\> adb devices
List of devices attached
0123456789ABCDEF device
Of course, I'm assuming you have your phone plugged into your computer.
It sounds like something is killing the service as soon as it starts. Try disabling any anti-virus and running adb devices again. You can also check your system logs for errors - run compmgmt.msc and check the Event Viewer's logs.
When I run adb devices on the shell, the device appears for a moment, then disappears
Do you mean Windows' command shell cmd.exe? The output of 'adb devices' doesn't update itself, it should just print out what's currently connected then terminate.
Nothing here worked for me. And you know what? I plugged it to my USB 3.0 port.
Just plug it to regular USB 2.0 and it'll work.
Hi you jst need upgrade your usb driver, follow this ref link, after upgrading you need to uncheck USB debugging, disconnect cable from device and then check USB debugging and connect cable to device again. this'll solve your problem..
link text
I had this same problem. Do the following:
Plug your phone into your computer and:
Run the command prompt.
Go to the tools location of the android sdk.
run 'adb kill-server'
then run 'adb start-server'.
Turn off COMODO Firewall and Defense+ module
I got my Nexus One on Windows 7 64 bit going by following these instructions:
http://developer.android.com/sdk/win-usb.html
Note that the directory has changed to /extras/google/usb_driver.
You know that you need to do this if you go to control panel->devices and printers and show properties on the device, and there's no driver shown.
Open the task manager by Ctrl+Shift+Esc
In the Processes select adb.exe and Click the End process Button.
Now close the eclipse and restart it again.
This worked for me. Hope this would work for you as well.