I have a rooted Motorola Defy+ running a Cyanogenmod v11 custom ROM (nightly build) created by Quarx. Using Android Studio Workspace,(ASW) v.1.1.0, when I try and debug on this device, I get
????????????[null]
listed in the Choose Device window, with the Logcat window showing
insufficient permissions for device
I would really like to use this device and ROM for debugging purposes.
When I enter lsusb from the command line I get,
Bus 002 Device 002: ID 22b8:431d Motorola PCS
This is the correct device id for Motorola units. I have installed 51-android.rules and 71-android.rules in /etc/udev/rules.d/ with the correct Motorola ids in these files.
I've also tried Revoke USB debugging authority, from Developer Options on the device, with no luck.
I have not tried running ASW as root hoping that there might be another option; is there?
Update: I was able to get in and access ADB by
uvachem-gsmith2:/home/greg/Android/Sdk/platform-tools # ./adb
I then did a kill server, did an SU to root user and restarted the server. I then tried to connect to the device from Android Studio. Got a message on the device about accepting the RSA key from the PC, said "Yes" and then was able to deploy the app to the device. So back to my original question, Is there another way to access this device without logging in as root? It seems as if there is a permission issue on the phone file system that is preventing this...
Update #2 The core problem here was a permission thing. Even though running ADB as root will allow access to the rooted Android device, a better solution is to change permissions in the udev file for this device...resetting 664 to 666, (see answer below). This allows the PC to access the file system on the device.
I had this while using a Linux machine with a Nexus 4 running Android 5.1
The fix was to enable both 'debug over USB' and 'connect as MTP'. The opposite is true when using the same device and Android Studio and adb on OSX though - to allow Android Studio to recognise the handset, I need to disable 'connect as MTP'.
I found a simple answer that worked for me:
adb kill-server
sudo adb start-server
sudo adb devices
You will find your device then.
Reference: http://itsfoss.com/fix-error-insufficient-permissions-device/
It's simple.
Just change your USB mode to File Transfer mode then it works.
Android 8
MTP is no longer available. On my android 8 "Transfer Files" option did not work.
"Transfer photos PTP" Is worked, and Studio showed the device name.
Steps on your cell phone
Open the developer options
Enable USB debugging.
change USB connection to PTP
Steps on Linux
on console run sudo usermod -aG plugdev $LOGNAME
Android 9
With Android 9 use the option File Transfer.
Changing permissions in this line from /etc/udev/rules.d/51-android.rules,
#Motorola
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", MODE="0664", GROUP="plugdev"
to,
#Motorola
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", MODE="0666", GROUP="plugdev"
resolves this issue in a manner that DOES NOT require running adb as root.
IN my phone Symphony W75,
in option USB computer connection-> selecting Connect as Media device(MTP) has solved the problem.
Long to short,
I had the same problem with a Prestigio PMP5570C tablet,
all you have to do is to confirm on your tablet that you want to copy data to/from your computer (what i forgot), and add the 2 lines that #portsample wrote.
You can find the idVendor of your device typing
lsusb
in UBUNTU 12.04, then you get:
Bus 001 Device 011: ID 2207:0010,
where 2207 is your vendor id.
Summed up the question and answer...
I updated my device (Nvidia Shield) that was previously connecting fine, so I knew that the PC setup is correct already. The developer settings seem to have a new layout on Android 7.0.
It is under Settings > Preferences > Developer options > Networking > Select USB configuration
Here, I needed to select PTP and everything works fine again:
Enable USB debugging
Use USB to transer file
This procedure solves the problem for me:
- On the Android device, drag the top menu and select "USB for file transfer"
- Press "Run" again
Go to Developer Options -> Default USB Configurations and Change to PTP
Run these two commands in terminal
sudo adb kill-server
sudo adb start-server
Should Work!
I made a script for this error. For me it works fine in Fedora 28, but it should work in many Linux distributions.
Just create a file with the content of the selfexpanied script. I called it usbDebbugingAndroidStudio.sh
Give him execution permission with: chmod +x usbDebbugingAndroidStudio.sh
And run it: sudo ./usbDebbugingAndroidStudio.sh
After that check the list displayed by the command lsusb and introduce the Id of
your device.
For example:
My output was: Bus 006 Device 002: ID 05c6:9091 Qualcomm, Inc.
So I type 05c6 and press enter.
The script:
#!/usr/bin/env bash
#This script configure Android Debug Bridge permissions to solve the following
#error: com.android.ddmlib.AdbCommandRejectedException: insufficient permissions for device
#This error is produced when you try to install an APK from Android Studio in your device.
#You can check the vendorId here:
#https://developer.android.com/studio/run/device#setting-up
#If your device's brand isn't listed check the info displayed by the command lsusb
lsusb
#My output was:
#Bus 006 Device 002: ID 05c6:9091 Qualcomm, Inc.
#The id for this line is 05c6
echo -n "Enter the id of your mobile device: "
read usbProviderId
cd /etc/udev/rules.d/
sudo touch 51-android.rules
(
sudo cat << _EOF_
SUBSYSTEM=="usb", ATTR{idVendor}=="$usbProviderId", MODE="0666", GROUP="plugdev"
_EOF_
) | sudo tee 51-android.rules
#Give read and write permissions to the file
sudo chmod a+r /etc/udev/rules.d/51-android.rules
#Kill the Android Debug Bridge server to restart it
cd $HOME/Android/Sdk/platform-tools
sudo ./adb kill-server
#If this still doesn't work unplug the usb cable and connect again.
#And repeat the last step Kill the ADB server.
What the F... ! :)
Note : I have seen it on android 8.1 on a One+5t...
Even we do all of above, it is necessary to make something on your android device .. in addition to go in dev options menu (usb debug) (don't hesitate to reset "cancel authorization" or something like this (I am in french version ;) )
If some people meet the same problem than me, maybe it could be usefull for you too :
Don't forget to authorize devices in your phone (each time of usb connect on the android device if you don't select always box). Beside, you can suppress the old authorized devices on your phone and start with proper parameter to authorize clearly your pc on your android device
When you connect the android device, a pop up or notification ask to authorize a mac address or equivalent to the device : authorize it if you want to authorize connection between your linux pc and your android device.
It is necessary to obtain autorisation on your android device when you use connect the usb cable (if you don't accept all the time but if it is the first time this box is going to appear on your devices) if you don't do it, adb devices show unauthorized even all rights are good (666, UDEV etc)
Note : thank you for your precious help.
A last thing, sorry for my english
I'm facing this issue while run flutter app from android studio 4.1, i did remove usb cable and plug into second usb port and its working :),
I'm writing this if someone face same issue then they can get help.
Same issue on Fedora 32, to fix this try this:
adb kill-server
adb start-server
For me and possibly many others the issue is to do with access rights to devices on the machine. Now that this is well documented in the android documentation, I think the best solution is here
On Debian based Systems you can run lsusb or dmesg to get vendor id if your vendor does not exist on the given list
I have face the same problem and i have resolved this by
Adding the path of your_android_sdk_path to the environment variable like
sudo export $PATH:/your_android_sdk_path/platform-tools/adb
its your wish how you want to add this to your account or system wide by editing these file ~/.bashrc file or ~/.profile
or
/etc/profile, /etc/bash.bashrc, or /etc/environment if u want to add to system wide access.
and then create the link of that in bin
sudo ln -s /your_android_sdk_path/platform-tools/adb /bin/adb
if you have used adb devices or any command then first kill the server like
adb kill-server
then start the server like
adb start-server
adb devices
now you can see your devices are listed properly without an issue
As the error message said, it is a permission insufficient problem. In my experience, it only happened on my Linux machine, and works well on MacOS and Windows. Launching your Android Studio with root permission could avoid this problem.
$sudo /your_android_studio_path/bin/studio.sh
In my situation:
cd /etc/udev/rules.d/
sudo chmod a+r ./*.rules #the name of your rules files.
Then,I can use adb without this error.
if accepted answer not worked for you then just simple follow steps:
Just open your android studio terminal:-
adb kill-server
adb start-server
it worked for me.
Without running Linux
sudo apt-get install adb. Don't forget to enable USB debugging.
Ref: https://developer.android.com/studio/run/device
I recently received a Hisense Sero 7 Pro Edition (running android 4.2) for use with development. I am currently on my Linux box trying to get it setup to be used over here since I seem to have better luck with the NDK on this computer.
Aside the point, I have the vendor ID registered in adb_usb.ini and its not seeming to want to play nice with my computer. When I plug the device in it says USB debugging is enabled as well as its connected as a media device. I have heard a few places that connecting as a media device causes some issues with USB debugging. Maybe that is the issue, if so how do I turn that off?
Kinda at a loss here. How do I go about getting this working?
Thanks in advance
I have the same Hisense Sero 7 tablet. The id is 109b, which can be found here in the list of USB Vendor IDs. This must be done in addition to the answer explained by Sumit Jain.
In addition to editing 51-android.rules, you will also need to add third party vendor Id to adb_usb.ini
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x109b
then in the terminal:
adb kill-server
adb devices
> List of devices attached
> 015d8bed094ffe06 device
P.S: this is the command I used
gedit ~/.android/adb_usb.ini
Well I think I have a method which can help u. Just follow the steps...
Type lsusb in your terminal after plugging in your device to your system. You will see some codes. Now remove the device and again run command. Now you will notice that one of the code is missing.
Note down the missing code because that is the code of your device manufacturer.
This is the code in my case (0bb4)
Bus 002 Device 014: ID 0bb4:0ce6 High Tech Computer Corp.
3.Now go to this path /etc/udev/rules.d
4.You will notice a file named 51-android.rules.
5.Open it and copy and paste the last line but change. The last line looks like the one i pasted above. Now in the copied line replace the code with your device code (0bb4 in my case).
Now type adb kill-server
Now type adb devices and you can see your device listed.
Hope this will help you and ya be careful with permissions your require anywhere.
Goto setting/about/build tap build 8 times. Bazinga developer options open up when you back out
I am developing (not end user), on Eclipse and I want to connect to Ouku tablet. I cannot find the drviers for this that work. Anyone know how to get Ouku tablet connected via USB. I cannot even see the device
Have you tried using the android update adb command, or manually putting the VID into your adb_usb.ini file (even though it telss you not to)?
more ~/.android/adb_usb.ini
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
You may need to use dmesg or lsusb or look in device manager to figure out the VID; also on linux you may need to put it in your udev rule.
Finally, do your know for a fact that this device has an adbd listening on USB? First make sure you have enabled USB debugging in settings. If you can get a shell open from a terminal program or connectbot on the device, you might want to try
getprop | grep adb
and
ps | grep adbd
Maybe this could also help, came accross this driver link
On this page
I had a P801W with VID: 0x05C6
After installing the driver package and updating the devices:
Update Driver
Select option: "Browse My Computer for Driver Software"
Select option: "Lett me pick from the list"
Select Mobile -> Google Inc -> ADB Interface
I had to to this for 4 new devices in my list, but after these steps $adb shell worked on me
Based on what I have learned today, this link could also provide good information in resolving this with the standard USB ADB Drivers from Google, by simply modifying the driver .inf description file.
I got HTC Desire phone, and i want to be able to run my application (developing ob eclipse or netbeans) on it. But when i run my applications i see (in the list of running devices ??? in 'name' column and ??? in status column. So i cant press OK button (its just disabled). Please tell me how can i make normal synchronization???
I think your problem is described here in step 3:
http://developer.android.com/guide/developing/device.html#setting-up
You have to:
If you're developing on Ubuntu Linux, you need to add a rules file that contains a USB configuration for each type of device you want to use for development. Each device manufacturer uses a different vendor ID. The example rules files below show how to add an entry for a single vendor ID (the HTC vendor ID). In order to support more devices, you will need additional lines of the same format that provide a different value for the SYSFS{idVendor} property. For other IDs, see the table of USB Vendor IDs, below.
Log in as root and create this file: /etc/udev/rules.d/51-android.rules.
For Gusty/Hardy, edit the file to read:
SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
For Dapper, edit the file to read:
SUBSYSTEM=="usb_device", SYSFS{idVendor}=="0bb4", MODE="0666"
Now execute:
chmod a+r /etc/udev/rules.d/51-android.rules
So this means you've followed all the instructions on the android dev site:
http://developer.android.com/sdk/installing.html#InstallingADT
You should also google "Developing on a Device android dev" (cannot post 2 links!)
My solution is that you need to go (command-line) to "tools" sub-directory in the SDK (that's check step2 in the first link)
Commands to execute:
sudo ./adb kill-server
sudo ./adb start-server
./adb devices
this works for me. I have to do it every time I reboot (would love to have a solution for that!).
I can't get adb to recognising my HTC Desire on my new upgrade of Ubuntu 10.10 Maverick Meerkat.
adb devices shows
List of devices attached
???????????? no permissions
Now, there are plenty of tutorials for changing rule files under /etc/udev/rules.d/.
However, I cannot find one specific for 10.10.
Can anyone tell me whether the rule file name and content is the same as described at link text, or are we looking at some new settings for this new release?
Many thanks
On Linux Mint/Ubuntu 11.04 with a Samsung Galaxy S2, I didn't use any rules, but when "reset adb" or when "Devices view" it shows:
???????????? no permissions
I had to :
sudo killall adb # if I don't, I get "error: insufficient permissions for device"
sudo ./adb usb
Then I was able to take screenshots following this tutorials: http://www.addictivetips.com/mobile/how-to-take-screenshots-of-android-device/
Cheers
My magic spell for Ubuntu 11.04:
$killall adb
$sudo adb usb
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
restarting in USB mode
Then go to eclipse and start debugging on real device
Ok I am a little late to the party but here is another approach...
Create a file called 51-android.rules in /etc/udev/rules.d with the following contents
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666", GROUP="plugdev"
Then run the following command to reload the udev rules ...
udevadm control --reload-rules
Now plug in your galaxy S2 mobile phone into the computer's USB port and run adb devices.
NOTE: You will need to change the vendor id (highlighted in bold) to match your phone's vendor id (in the OP's case it should be 0bb4 for HTC)
Okay, I guess the tutorials work, I created both 70-android.rules and 51-android.rules, re-typed them again (get rid of the funny quotes when you copy from the web).
Restart
And now it is recognised!
On windows, I had to download a Special App from HTC in order to get the proper USB drivers to connect to my Evo. The app in question allows you to synch your outlook contacts/calendar (weee...) with those on your phone. I rather doubt there's something similar available for ubuntu/Linux.
I strongly suspect you're up against a similar situation. The standard USB drivers don't work with HTC phones, so you need Something Else.
If this is something that stopped working with the upgrade, you'll need to take a close look at any USB-related changes.
Good luck.
Hi all i am very frustrated by checking all sides
But one day i got the solution of this problem pls follow the following steps
First open your device terminal
1)on the top left hand corner in Application ->Accessories->terminal
2) on terminal window type following commands
$ sudo su then press enter after that terminal want password which is set by you
in installation or giving at the time of logging.
$<Enter password> password is not shown but it is type internally you can just type
whole password
$ mkdir ~/.android
$vi ~/.android/adb_usb.ini
press ctri+z here
$ echo "0x0451" > ~/.android/adb_usb.ini
$cat /root/.android/adb_usb.ini
$sudo mount -t usbfs none /proc/bus/usb
$cd path of android sdk tools from home
like /home/tv-014/Desktop/newandroid/android-sdk-linux/platform-tools
in my system i have put android-sdk-linux at desktop and in it one platform-tools
folder contain the adb.exe file
so after cd command we have the path from home to platform-tools folder.
$ ./adb kill-server
$ ./adb start-server
$ ./adb devices
Now you got the list of devices attach to your systems.