I have an app, a single activity app with fragments in it.
The usual use case for this app is, that you start it and put the phone away and every now and then, you get back to the phone and insert some data... It's a logging app, you are doing something and insert your results into the app...
I have the problem, that every now and then, my activity get's destroyed and is recreated with an empty bundle... (Most of the time this is not the case, but every now and then this happens...). My app sometimes starts a service, even this service is killed in this case...
This means, that the system has killed my app, does it? How can I avoid this?
I need to keep the user data and the current top fragments... And they are saved to the bundle and everything works as long as their states and the data get saved...
Btw., my activity is always the TOP ACTIVITY, only that the screen turns off often... I just want to keep my activity alive as long as possible until the user leaves it with the back button... Or to save the state reliably
IMPORTANT NOTE
onSaveInstance does not always work (it's not part of the lifecycle and therefore not guaranteed to be called)... it only works most of the time... I need a way to that works always... If android kills my app...
don't keep your app in memory
You don't want to block Android from killing your app. What you want is to restore your app's state properly. Then the user will never notice the app has been destroyed and the user still gets the benefit of an app that was destroyed when not in use.
If you really want this use a wakelock. This will drain your users battery so I think twice before implementing this... Info at How do I prevent an Android device from going to sleep programmatically?
onSaveInstanceState explained
To do so check what information is needed in the bundle and persist that information with the onSaveInstanceState(bundle:Bundle) method so you can reuse it in onCreate(sameBundle:Bundle).
More information available from Google documentation at Save your Activity state and Restore your Activity State.
About Android Activity lifecycle
As stated by #prom85 in the comments below it's not guaranteed that the onSaveInstanceState method will be called because it's not part of the lifecycle. Workaround for this is using the onPause lifecycle hook to ensure your data is stored.
More information at Android: onSaveInstanceState not being called from activity
I had a similar problem, I arrived at this post while searching for a solution, you have to play with the manifest to achieve this and also understand what exactly activity is, in Android eco system,
In Android activity is a task which has a pre defined work.
I dig a lot in the documentation, I found that, we can configure activity in two ways,
Persistent
non persistent
if you mention for the activity in the manifest as
android:persistent="true"
and run the below use case
Start the APP
Press back or home button
you select the activity in the back stack again to bring it to front
Activity enters start -> pause -> stop - > resume , it does not get into onDestroy method.
if do not mention
android:persistent="true"
for the same use case
Activity enters start -> pause -> stop -> destroy, and if you select the activity from the back stack
Activity enters resume->create->start
If you want to run a service/task on activity start which keeps running when the app is in back stack, then you have to start that in the onCreate method, and kill them onDestroy by specifying your activity as persistent in manifest.
I hope my above solution might help others who arrive here for the same problem
Related
If I, for example, need to keep some very important data which the user can edit within my app, should I need to save them every time user changes such data or is it ok if I would save it within onPause(), onStop() or onDestroy() methods?
Can somehow application end without any of those methods calling? (For instance when battery runs out)
This certainly can't be done in onDestroy().
According to the documentation:
There are situations where the system will simply kill the activity's
hosting process without calling this method (or any others) in it, so
it should not be used to do things that are intended to remain around
after the process goes away.
So yes, the application can end without calling any of the lifecycle methods.
In that scenario when the phone is shutting down, you can use the ACTION_SHUTDOWN Intent.
More info here. For all other cases onPause should do the work. Even in the link provided, there is a statement that onPause will be called if the app is in FG.
Apps will not normally need to handle this, since the foreground
activity will be paused as well.
However, if it is not so expensive operation, I would go with saving data after edit.
As per the documentation of Android activity life cycle, onPause is called when an activity is going into the background, but has not (yet) been killed.
Hence, in most Android documentation, and sample codes you will find onPause is used for saving any persistent state the activity is editing, to present a "edit in place" model to the user and making sure nothing is lost if there are not enough resources.
So in your use case, all you need to do is implement onPause for your Activity and write a code to Save the activity state (EditText content or any other ongoing user interactions). Android system will save the activity state which you can always get back in onCreate of your Activity when android launch your activity next time.
in this case please verify your phone activity via debug interface , some of phones are terminate your application this is force quit.
I have an Activity that I consider a critical operation (Specific communication with another computer over Bluetooth) and I want to make it so that when the user leaves the activity, it cannot be resumed to that state. With other words, if the user resumes the activity it should be recreated.
Since this activity uses Bluetooth it might start one or two activities for result (Enable-Bluetooth activity and Request-Permissions activity) and therefore, I cannot simply finish() the activity in onPause().
By leaving the Activity, I mean presses the home button, takes a phone call or presses the multitask button
I have experimented with some Activity Launch modes (like singleTask) without success.
I already call super.onCreate(null) in the Activity's onCreate() method, preventing it from recreating to a specific state after it has been destroyed, but I want to reset the activity whether onDestroy() has been called or not.
Does anyone have any suggestions on how this should be done correctly?
Edit:
The question in the Possible duplicate explains how to quit an application and it's subtasks completely (whereas just finish() would suit my needs perfectly - if I knew where to call it). This question is about finding a clean way to not resume the previous state of the Activity.
If you never want a state persist once you've left via the home button, or perhaps even when the screen turns off, the simplest thing is to work with the lifecycle events available. It's a whole lot simpler than trying to work around Androids design by doing things like forcing the close of your app.
Since everything needs to be setup each time someone returns to the app, you can move all of your setup logic out of onCreate and into onResume. Then, perform all the required cleanup (kill your BT connection, etc) in onPause. The only possible gotchas are related to things like changing screen rotation/ opening the keyboard which might trigger lifecycle events that you didn't intend. That might make your program less responsive if you have a lot of long running tasks on the UI thread in onResume.
I have an offline-online application, i found a strange issue in it, may be it is not, but i did'nt understand about it..
App requirement is that, if internet is available, even from starting app or from resuming, i call webservices and store data in sqlite, otherwise app stays in offline mode,
I have 2 activities, second activity contains an id, that i passes through intent (that point is important),
My Problem:
if i am in second activity, and internet is running, and i press home button , then this 2nd activity pauses, then stop which is a default behavior in android, i goto settings, turn wifi off, then press app icon again to get back in my app, here i got confused, i expect that my app now will be in onResume, but when i see in logcat its onCreated called and app
crashes, nullPointerException occurs, because this 2nd activity does not have that id, i passed through intent..
Note:
If i use recent app button to go to "settings", then come back again after turing wifi off, and repeat all this behavior, then working fine, its onResumes called not oncreate..
My Question
Why it is going in onCreate while i my expectation is to be onResume while i came back from app icon?
The NPE reason is clear, your second activity doesn't have the value and it crashes.
Why do you get different behavior then!?
It's because the launching intents are different. When you "task switch" Android is merely stopping your app but leaving it there (no guarantee) in case you want to switch back.
Going home (with home) is a clear indication that you want to leave the app, and although it will remain in memory and cached (as long as there is available memory), going back through the launcher (or App Icon as you call it) fires the LAUNCHER category (which goes to your Activity 1 first).
Take a look at this StackOverflow question (and answer) to better understand the consequences.
In any case, your problem is that your app must always be designed to resume in an inconsistent state and be able to recover. Android will kill your references, will destroy your variables and most likely send your app to hell overnight even if you have it running… if the phone goes on standby, chances are processes that aren't doing anything will be paused/stopped and likely killed.
Re-design your app so this is not a problem.
You say:
"I have 2 activities, second activity contains an id, that i passes
through intent (that point is important),"
Well, why not make it easier and have ONE activity and TWO fragments? Then use Fragment Arguments to pass the value?
Or why not store the value in the preferences and/or a local database and recover it during onCreate?
And also why not make it so that if Activity 2 doesn't have a value, it calls Activity 1 and closes itself (better than a crash, huh?).
Etc.
As you can see there are multiple things you should consider. All in all, never trust that your app will be alive, because it won't.
Once your activity's onStop gets called it's susceptible to be killed by the android system to collect resources for other apps which is what i think happened in your case.If it is killed, android will obviously call OnCreate when you get back to the activity.Check this for clarification. For experimenting you can try opening more than one apps from your recent apps and then return to your app. It may crash there too now.
You stated that you can see that the activitiy is stopped (onStop) if you go to the settings. That is the behaviour shown in the Android activity lifecycle. The counterpart for onStop is onCreate. So it does what the documentation tells us. Btw activities are paused if they are visible in some way and get stopped if they are not visible anymore. This would explain why your activity get paused. For further information read Managing the Activity Lifecycle. You can find a whole picture of the lifecycle here.
This type of behaviour can be seen when you change some system configurations like font type,font size or language. But turning wifi on/off won't destroy the app and recreate it again. Check http://developer.android.com/guide/topics/manifest/activity-element.html#config for more information
I am seeking short characteristic of Android Multitasking. I have found, that when you minimize Android application, it is ended and it's process remains on the background. When user wants to reuse his app, this process alive it's application. User will be at the same state, when he left (if there was enough memory while working with it), or it will be loaded from scratch, because there was no free RAM for other work and Android exited this process. Am I right? Everywhere there are articles with 20 pages and more about Android multitaksing. I need to know key points because I am lost in a such long artices.
Thanks
Short Answer: Yes. If your app can live in memory despite being 'closed' then it will stay in RAM and processing will continue when you click on it again. Otherwise it will be restarted and you will get an onResume().
Long Answer: Please just read the Activity Lifecycle:
When Android activity is covered by other windows it will enter into paused state and method onPause will be called. It may also me destroyed by OS and then onDestroy will be called. You have very little control over it and can't expect your application to come back up with the same state. However, when activity is brought up again to foreground in will go through steps of onCreate and onPause. Those methods can be used to restore its state.
Here you can find nice diagrams describing Activity lifecycle. Similar but slightly different lifecycle is applicable to service.
http://developer.android.com/reference/android/app/Activity.html
Android activities are the main visible screens that user see while the application is running. If you close the screen or switch to another application, the current activity is put to hibernate and you can save the state with
Activity.onSaveInstanceState(Bundle bundle)
After your activity gets the control back, you can restore the state with
Activity.onRestoreInstanceState(Bundle bundle)
Note that you need to be careful not to store any context references within the activities and related classes as the activity and thus context has changed between pause and resume. Instead, you should always pass the current activity as the active context to avoid having exceptions from invalid context.
I'm not talking about restoring application state (using Bundle or configuration change or even SharedPreferences) i'm talking about the fact that i have a certain task, that is a base activity: HomeScreenActivity and from there i can have a series of activities opened for the user's flow.
I want in case of application's death or user killed his own session to restore the whole task, not just one activity, i mean to restore the whole activity stack i had before the application was killed. if the user was in my billing screen and left off my app i want to take him back to that screen, but i want that if he'll press back he'll go back to my search screen or filtering screen, whatever was there before he left off.
I have no problem saving the activity's order in sharedPreferences and know the order once i start my home screen, but i wonder if there's a way to tel landroid to start an activity, which sould only enter the task's stack and not call the activity's onCreate method unless i actually get to it(with back key).
Perhaps someone will have a better idea, but the only thing that comes immediately to mind is to add a "resetup" flag so that you could sort of replay a script of the user's previous activity navigation actions within your app, having your activities start each other up in turn but due to the resetup flag bypassing most of their code so they don't really do anything except essential setup and start the next one.
One complication is that it's probably the activity they were actually in which android will resume.