I have created a avd for nokia x on my eclipse. And is successfully created but when I start it , it does not starts up. it shows that its launching with a progress bar but it does not launches and does not gives any error also. I have installed all required plugins
Please delete your current AVD and restart the Eclipse . Sometimes, some abnormal malfunctions may happen unknowingly...
I'm attaching a screen shot for you to create an AVD with all necessary details., please follow and create the new AVD. That should help you to proceed further.
on a sidenote - I believe you system has a minimum of 4GB RAM in order to see the AVD coming up faster. If the RAM is less, then it may take good amount of time to come up and show on the screen.
I believe you are also aware of the HAXM and Intel Virtualization technique to make the Emulator run faster. If any doubts...follow this link as well posted by me - HAXM guidelines
Related
I'm trying to launch a project in Android Studio using the Android Virtual Device Manager. At first the Android Emulator pops up with a Google icon and a loading bar, but it never actually finishes loading.
I also tried running the program without using the Device Manager and just clicking the 'Run' button. A, in which case I get this:
"Instant run requires that the platform corresponding to your target device (Android P Preview) is installed."
And if I click on "Install and continue" it says:
"All packages are not available for download!
The following packages are not available:
- Package id Platforms;android-P"
These are all the versions I have installed:
Instant run requires that the platform corresponding to your target device (Android P Preview) is installed.As you can see, the Android P Preview is actually installed. Although it says on the right it's "Partially installed" there doesn't seem to be any update option.
I have no idea why this won't work.
Please help.
This seems like a memory issue with your AVD. Newer API emulator images may require at least 1 or 2GB of RAM in the AVD's settings, and a larger VM heap size.
Setting RAM too low will cause the emulator to either fail to start, or start but never end booting. Use at least 1024 or 2048 MB for API26 images.
Setting RAM to a value higher than your system’s capacity will fail to start the emulator
Emulator’s first boot seems to require more RAM. If you create an emulator with 512 MB for the first time, it might never end booting and hang. If you create it with 2048 MB, start it up, then close it, you may be able to run it with as little as 512 MB from now on, to a certain extent. All RAM values here refer to the AVD’s assigned RAM
Taken from this blog post. Also check out there if you need HAXM or Hypervisor for hardware acceleration.
I have used Eclipse to write apps for android multiple times without issue but I am now trying the new Android Studio which I like but here is my problem.
When I run the app I pick my AVD and then tell it to start. The emulator starts loading and then says paired. Then it starts telling me to swipe up and left and right to display and remove cards. Then it says to put hand on screen to dim the screen, ok well I'm on a MacBook Pro so that don't work I swipe to get past that part sometime I can others I can't. Next it says to touch the clock and say some words which also can't do on my Mac, and that is where the emulator stay it never goes to a home screen and it does this no matter what AVD I choose. How can I get the Emulator to just plain open to the home screen like it should.
Thanks for any help.
In your AVD Manager, edit your AVD and make sure your Target is "Android L" and not "Android X.XW". The "W" stands for "wear" and that is causing your issue.
Alright I figured it out. I remember having a similar problem recently when I was taking an android development class for college using eclipse and sure enough that was it.
So here was the solution eclipse gave same problem. for some reason if you have caught exemptions such as hard coding a string etc. the emulator will not run till you ignore these exemptions or fix every last ! mark in your code. Once you do this the emulator will load and run properly.
I also had the same problem with my AVD. The Android Emulator window just used to pop us and the green bars flowed infinitely. After lots of trial and error I arrived at a solution for my problem. the problem was with the Heap size and the RAM size.
Initially the default heap size was 128 MB and RAM was 1563 , I just changed the heap size to 512 MB and reduced the RAM size( high RAM was making my PC run slow) also I enabled hardware acceleration. And Yipeee, it worked.
I am beginning android development using the latest versions of the android SDK and eclipse. I have followed the Hello Android Tutorial
and used every combination of targets available but the Emulator freezes on the load screen with the flashing "android" title.
I have checked the other related question and DID wait about 15 minutes. but still no change. Any help with this would be great. Thanks.
I had a similar issue, and still do sometimes today. Have you tried deleting the AVD and then re-creating it?
Also try changing some of the AVD's values, give it more ram, larger SD card. You can do this through Window > Android SDK and AVD Manager > Edit the AVD, and then add values / modify the SD card size.
EDIT: Also - just for reference, I have a Intel Core i7 with 16gb of RAM and AVD's STILL take forever to load.
EDIT: Another handy thing to know is that if you check the "Snapshot" option when editing the AVD, it will save the last state and load that instead of a full [slow] boot. Kind of like putting your computer to sleep.
Adding values / modify the SD card size may be better .
Try not to close the Android Emulator , to avoid re-open .
Yah android emulator takes time to start up, but it should start within 2-3 mins. Check your RAM and processor. The RAM must be atleast 1GB (preferably more) to speed up loading emulator.
When i run the emulator is running up to the process big text android. After that is not responding. In Eclipse console showing text "Wait for Home" I tried re-install of android also
My System properties Microsoft Windows XP, 0.99GB of RAM
Any help me for this problem Advanced Thanks
The emulator takes a long time to load the first time, several minutes, and in this time only shows 'Android' in large text. Wait a couple of minutes and then you should be fine.
Make sure your SD card file is large enough. I've found the minimum Eclipse enforces (9MB) isn't enough for it to boot.
You may also have to use a different computer or upgrade your RAM. Modern phones have around 500MB RAM, so .99 GB maybe not be enough to go around for Eclipse, Windows XP, and the emulator.
As a last resort, you could reformat. I was having a similar problem and it worked after reformatting.
Don't rush to reinstall the SDK. Try creating a new AVD with the same API level that your original one had and run your app on that one. If that's OK just delete the original one as its image may be corrupted. You won't lose anything and it's not worth spending time on trying to fix it.
Edited:
The solution which worked for me is, when you get the message
Waiting for HOME ('android.process.acore') to be launched...
wait for few seconds and then right click on the project and click run as android application once again.
I once had similar problem. This solution worked for me. When I launch the emulator, I chose wipe user data option on the launch options window. Hope this help.
I am trying to test my app on android emulator. So as soon as, i am choosing run the application, a new window pops up on the screen and after taking 1-2 minutes, it goes not responding.
I also tried running the emulator separately using AVD manager. Using this, i am able to start the emulator; but after 3-4 minutes - it goes "not responding".
OS- Windows 7 32 bit [ intel pentium 3.00 GHZ + 2GB RAM]
Java - 1.6
Android SDK - i have the latest SDK with 3.0 OS
IDE - eclipse Helios Service Release 2.
Plz help, i am unable to do anything.
Update: can you guys point me towards other 3rd party emulators which i can use?
Update2: My emulator is taking too much time in launching now. Can this be a cause? If yes, then how do i decrease the boot time?
(This isn't so much of an answer, but might go some way to figuring out the source of the problem; I'd comment on the original question instead but don't have enough rep to do so)
I keep having this problem too. I have an app with a few activities, one of which contains a layout with a Canvas which runs its own thread to do drawing processing. All of the activities run fine except for this Canvas activity which seems to crash the emulator in the way the OP described (the emulator .exe itself crashes rather than the application within the emulator) if left to run for a few minutes. As far as I can tell I'm not doing anything unusual with the thread - I copied the Lunar Landar example in the SDK and worked from that so I'm doing everything "by the book". The app runs fine on real devices.
So, while I realise the OP may be long gone, could anyone else with a similar problem confirm that the affected Activity is using a Canvas, drawing Thread, or anything like that? This problem is a real pain and I can't find any other discussions/solutions for the matter.
EDIT: I recently did a complete, clean re-install of the most recent versions of Eclipse and the Android SDK with all the updates and that seemed to solve the problem. Guess there was a bug in an older version of the emulator that was fixed in a more recent release.
Have you enabled snapshots. If you enabled it then you can be trying to open a incorrectly saved snapshot. If so, while starting the emulator with launch options, uncheck launch from startup
#mudit:remember Android 3.0(Honeycomb) is dedicated entirely to only tablets and not the mobile phones..
Does the emulator prompts you "not responding" in your app or when you just start the emulator without launching an app, too?
A strong advice: you don't need to restart the emulator for every app launch, just keep him running (maybe you already do that).
Does the logcat show some errors prior to the "not responding"? Have you tried creating another AVD?