I designed one Application in Android. When i upload this Application on device, it will display three icons of that application.
Which part of Android Manifest File is responsible to display the icon.Any idea?
Go to the manifest and remove the launcher intent from all activities but one
Only a single activity - the one you want opened when the user clicks the homescreen icon - should have the following intent filter:
<intent-filter>
<action android:name="android.intent.action.MAIN"/>
<category android:name="android.intent.category.LAUNCHER"/>
</intent-filter>
See your AndroidManifest file. How many activities you have with next code:
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
You must have 3 activity for this case.
Also this is may be last package name of your project before you rename it.
See here Manifest file
android:icon="#drawable/ic_launcher"
And
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
Related
I am writing an Android App that has one main activity and one subactivity. When I install the app on my phone to test it out, I get two icons instead of one. The first icon is for the main activity and the second is for the subactivity. I don't want/need an icon for the subactivity.
Does anyone know how to turn this off in my app code, so that only the icon for the main activity is installed? Any information you can provide is greatly appreciated!
Thanks,
MobiKnow
Does your application manifest list an intent filter under your sub-activity that matches the main launcher?
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
Make sure that your sub-activity is not filtering for these intents.
Edit: Just to be very clear, make sure the above lines are not listed under your sub-activity. That intent filter lets the Android system know that you intend for it to be listed as an entry point to your application.
We have the same problem but i fixed it this way
before my code below in manifest
<application
android:debuggable="true"
android:allowBackup="true">
<activity android:name=".SplashActivity">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
<activity
android:name="com.noupdate.apptest_noupdate.MainActivity"
android:icon="#drawable/ic_launcher"
android:label="#string/app_name">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
</application>
Notice that in the SplashActivity inside the intent is this code
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
i only deleted the category
<category android:name="android.intent.category.LAUNCHER" />
So after i deleted the intent-filter category in splash it didn't install two app icon but only one for main the code will be like this notice that the intent-filter category is deleted
<application
android:debuggable="true"
android:allowBackup="true">
<activity android:name=".SplashActivity">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
</intent-filter>
</activity>
<activity
android:name="com.noupdate.apptest_noupdate.MainActivity"
android:icon="#drawable/ic_launcher"
android:theme="#android:style/Theme.NoTitleBar"
android:label="#string/app_name">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
</application>
it really helps
It creates two App icon because you must have added the given filter to two of your activities. See manifest.
<category android:name="android.intent.category.MAIN" />
Remove the above statement from the other one. Then you are good to go.
Like in the other answers,
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER"/>
Was the culprit. However, in my manifest I only had one activity with that intent filter. As it turns out, I am using a library I built and it has an activity declared in it's manifest which uses that intent filter. So, in short, be sure your app's manifest and dependencies, if any, only have one activity with the intent filter.
I guess that in your AndroidManifest.xml, you've got both activities having the LAUNCHER intent-filter. Remove it from the second activity, and you should be set!
You have
<intent-filter . . . >
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
along with
android:icon="#drawable/icon.png"
set for both activities.
What that means is that this is a launcher icon, put me on the home screen. Only set those for the activit(ies/y) you want on the home screen.
I was searching answer to exactly the same question. It appears the only thing needed (in addition to recommendations on removing MAIN and LAUNCHER intent filter) is to rebuild your project - that will clean things up and upon next launch I saw single icon on my device (just running application on device after changes did not help).
if anyone run into this issue using Pebble SDK. I noticed PebbleKit Androidmanifest.xml holds a LAUNCHER activity as well. This is what caused it for me. Just remove this part. It will not effect Pebble functionality.
SIMPLE answer..
REMOVE:
<category android:name="android.intent.category.LAUNCHER" />
From your AndroidManifest.xml
Leave your intent-filter alone.
<intent-filter android:icon=”drawable resource” android:priority=”Integer” /intent-filter>
Priorities are set for the parent component. This setting may help you to set the parent icon for your Android app development.
in my first activity I have two intent filters.
The first one is for regular access from the launcher. The second one is used when a user tries to unzip a file.
android:name=".MyApplication">
<activity
android:name=".SplashActivity"
android:label="#string/app_name"
android:icon="#drawable/ico"
android:theme="#style/Theme.Sherlock.NoActionBar"
>
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
<intent-filter>
<action android:name="android.intent.action.VIEW"/>
<category android:name="android.intent.category.ALTERNATIVE"/>
<data android:mimeType="application/zip"/>
</intent-filter>
</activity>
The problem is that in the launcher I get two icons instead of one .
How can I get only one icon and mantain the ability to run the activity with the second intent filter. I have tried removing (or changing to a different category)
<category android:name="android.intent.category.ALTERNATIVE"/>
Thanks
EDIT:
The problems seems somehow related with Android Studio (v 0.1.6 and 0.1.7) as
with Eclipse only one icon shows up.
in my app, there is two activity and i want to make activity1 to the starting activity after installation.
But now the RUN button (is showed right after packgae installing) is disabled.
below is the manifest file. thanks.
<activity ...1>
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
<activity ...2>
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
<intent-filter>
<action android:name="android.intent.action.ACTION_POWER_CONNECTED" />
<action android:name="android.intent.action.ACTION_POWER_DISCONNECTED" />
</intent-filter>
</activity>
android) can i set a default activity that runs right after installing
No activity "runs right after installing". The user has to launch it from the launcher.
below is the manifest file
No, it is not. That is not even valid XML.
Also, note that your third <intent-filter> is invalid. Not only are you missing any category (you need at least DEFAULT for activities), but ACTION_POWER_CONNECTED and ACTION_POWER_DISCONNECTED are not activity actions.
I am going to take a guess that you really mean to ask: "I have two activities, both described as ACTION_MAIN/CATEGORY_LAUNCHER, and now the Run button does not work -- what can I do?" The answer would be "either remove the ACTION_MAIN/CATEGORY_LAUNCHER <intent-filter> from one of them, or mark one of the two as disabled (android:enabled="false") and enable it later on using PackageManager."
I think the problem is the second:
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
You shouldn't have 2 activities flagged as the MAIN and LAUNCHER activity.
Try removing it within activity2.
Check out: http://developer.android.com/reference/android/content/Intent.html the intentfilter s are discussed.
I have two android applications- A and B.
I'm trying to package them as a single unit so that upon installation the system installs both apps. However, I could not find any reliable answer till now.
In A's manifest file I added activity tag of B, resulting in error.
Could anyone guide me on how to package two applications as a single unit?
Thanks in advance!
I do not believe this is possible. An APK corresponds to a single AndroidManifest.xml which corresponds to a single Application.
However, if you want mulitple "launchers" or icons, it is possible by exposing multiple Activities by adding IntentFilters to the ones you want (which take the launcher event). However, they are still, technically, a single application.
Update:
Here's how to expose multiple Activities. The main activity would have something similar in the AndroidManifest.xml
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
Copy-paste this inside the other Activities you want to expose. For example:
<activity
android:name="com.example.app.FirstActivity"
android:label="#string/first_app_name">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
<activity
android:name="com.example.app.SecondActivity"
android:label="#string/second_app_name">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
I am writing an Android App that has one main activity and one subactivity. When I install the app on my phone to test it out, I get two icons instead of one. The first icon is for the main activity and the second is for the subactivity. I don't want/need an icon for the subactivity.
Does anyone know how to turn this off in my app code, so that only the icon for the main activity is installed? Any information you can provide is greatly appreciated!
Thanks,
MobiKnow
Does your application manifest list an intent filter under your sub-activity that matches the main launcher?
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
Make sure that your sub-activity is not filtering for these intents.
Edit: Just to be very clear, make sure the above lines are not listed under your sub-activity. That intent filter lets the Android system know that you intend for it to be listed as an entry point to your application.
We have the same problem but i fixed it this way
before my code below in manifest
<application
android:debuggable="true"
android:allowBackup="true">
<activity android:name=".SplashActivity">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
<activity
android:name="com.noupdate.apptest_noupdate.MainActivity"
android:icon="#drawable/ic_launcher"
android:label="#string/app_name">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
</application>
Notice that in the SplashActivity inside the intent is this code
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
i only deleted the category
<category android:name="android.intent.category.LAUNCHER" />
So after i deleted the intent-filter category in splash it didn't install two app icon but only one for main the code will be like this notice that the intent-filter category is deleted
<application
android:debuggable="true"
android:allowBackup="true">
<activity android:name=".SplashActivity">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
</intent-filter>
</activity>
<activity
android:name="com.noupdate.apptest_noupdate.MainActivity"
android:icon="#drawable/ic_launcher"
android:theme="#android:style/Theme.NoTitleBar"
android:label="#string/app_name">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
</application>
it really helps
It creates two App icon because you must have added the given filter to two of your activities. See manifest.
<category android:name="android.intent.category.MAIN" />
Remove the above statement from the other one. Then you are good to go.
Like in the other answers,
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER"/>
Was the culprit. However, in my manifest I only had one activity with that intent filter. As it turns out, I am using a library I built and it has an activity declared in it's manifest which uses that intent filter. So, in short, be sure your app's manifest and dependencies, if any, only have one activity with the intent filter.
I guess that in your AndroidManifest.xml, you've got both activities having the LAUNCHER intent-filter. Remove it from the second activity, and you should be set!
You have
<intent-filter . . . >
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
along with
android:icon="#drawable/icon.png"
set for both activities.
What that means is that this is a launcher icon, put me on the home screen. Only set those for the activit(ies/y) you want on the home screen.
I was searching answer to exactly the same question. It appears the only thing needed (in addition to recommendations on removing MAIN and LAUNCHER intent filter) is to rebuild your project - that will clean things up and upon next launch I saw single icon on my device (just running application on device after changes did not help).
if anyone run into this issue using Pebble SDK. I noticed PebbleKit Androidmanifest.xml holds a LAUNCHER activity as well. This is what caused it for me. Just remove this part. It will not effect Pebble functionality.
SIMPLE answer..
REMOVE:
<category android:name="android.intent.category.LAUNCHER" />
From your AndroidManifest.xml
Leave your intent-filter alone.
<intent-filter android:icon=”drawable resource” android:priority=”Integer” /intent-filter>
Priorities are set for the parent component. This setting may help you to set the parent icon for your Android app development.