Hi i am trying to start my emulator in eclipe but it's not starting. It shows logcat error as below...please help me....how to overcome this problem
09-11 19:13:13.020: I/Netd(622): Netd 1.0 starting
09-11 19:13:13.040: W/InterfaceController(622): Warning (dlopen failed: library"/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
09-11 19:13:13.260: I/SurfaceFlinger(623): SurfaceFlinger is starting
09-11 19:13:13.260: I/SurfaceFlinger(623): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
09-11 19:13:13.260: D/libEGL(623): Emulator without GPU support detected. Fallback to software renderer.
09-11 19:13:13.300: D/libEGL(623): loaded /system/lib/egl/libGLES_android.so
09-11 19:13:13.380: D/gralloc_goldfish(623): Emulator without GPU emulation detected.
09-11 19:13:13.400: E/SurfaceFlinger(623): hwcomposer module not found
09-11 19:13:13.400: E/SurfaceFlinger(623): ERROR: failed to open framebuffer (No such file or directory), aborting
09-11 19:13:13.400: A/libc(623): Fatal signal 6 (SIGABRT) at 0x0000026f (code=-6), thread 623 (surfaceflinger)
When booting the emulator from Eclipse, look at the Console tab, not the log tab. Console may show error messages. The Log tab only shows logcat, which are messages from Android itself
When you create a new emulator it warns you about assigning it too much RAM if you try anything above 768M the emulator may not start according to the error message at the bottom of the virtual device setup. Do try with 512M of RAM and see if it starts.
While creating emulator check the option "Use Host GPU" at the bottom
or try another API version
Related
I did a fresh install of latest Android studio on my mac os High sierra, there was no previous version of Android studio on the laptop. AVD keeps crashing when I try to run a basic code.
Attached is the error snapshot, I tried different workarounds listed in different threads, tried command line, tried to just invoke avd, still the same error. Has Android 11, 10 installed.
Below is the error
Process: qemu-system-x86_64 [2406]
Path: /Users/USER/Library/Android/*/qemu-system-x86_64
Identifier: qemu-system-x86_64
Version: 0
Code Type: X86-64 (Native)
Parent Process: studio [2380]
Responsible: qemu-system-x86_64 [2406]
User ID: 501
Date/Time: 2020-11-21 13:24:24.625 -0800
OS Version: Mac OS X 10.13.6 (17G14042)
Report Version: 12
Anonymous UUID: 3F92D280-01FC-0232-0678-BB15A8C21C4E
Sleep/Wake UUID: DC22FDA6-D97B-44DD-9541-89BE58B903F9
Time Awake Since Boot: 5300 seconds
Time Since Wake: 960 seconds
System Integrity Protection: enabled
Crashed Thread: 10
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Exception Note: EXC_CORPSE_NOTIFY
Application Specific Information:
*** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[__NSArray0 objectAtIndex:]: index 0 beyond bounds for empty NSArray'
abort() called
terminating with uncaught exception of type NSException
Application Specific Backtrace 1:
0 CoreFoundation 0x00007fff297edf3b __exceptionPreprocess + 171
1 libobjc.A.dylib 0x00007fff50b46942 objc_exception_throw + 48
2 CoreFoundation 0x00007fff298079ed -[__NSArray0 objectAtIndex:] + 93
3 libMoltenVK.dylib 0x000000011e9ef8a7
Error
I had the exact same problem and I solved it by disabling the hardware graphics rendering.
Edit the configuration of your virtual device in AVD manager, select "Show advanced settings" and then select "Software - GLES 2.0" in the option list for graphics.
Note that it is only a work-around, not a real solution because now the emulator will run but very very slowly.
changing the option for graphic rendering in AVD manager
When I was starting Android VM from shell commands, the AVD crashes immediately after launch with below error:
/Users/allanjiang/Library/Android/sdk/emulator/emulator -avd Nexus_5X_API_28_x86 -netdelay none -netspeed full
libc++abi.dylib: terminating with uncaught exception of type std::length_error: vector
Abort trap: 6
Everything runs fine a day ago, and start hitting this issue starting today. Please help if you have seen this issue.
OS is macOS 10.14.3
Sometimes weird things happen and resetting the VM will resolve them.
Go to AVD manager, select your VM instance, then select more and click wipe data. If that doesn't work, just delete it and reinstall a new one.
I installed Android Studio on my Mac (Macbook Pro, August 2017, OSX 10.12.4), then started up, created a hello world project and created an AVD (Android Virtual Device, Nexus 5) to run my project on it.
The error shows when I try to run my project on the simulator (pressing the play button) or when I try to start up the emulator itself.
Here's a screenshot of the error:
Here's the beginning of the stack trace:
Process: qemu-system-i386 [5779]
Path: /Users/USER/Library/Android/*/qemu-system-i386
Identifier: qemu-system-i386
Version: 0
Code Type: X86-64 (Native)
Parent Process: studio [4683]
Responsible: qemu-system-i386 [5779]
User ID: 502
Date/Time: 2017-08-22 13:20:02.612 +0100
OS Version: Mac OS X 10.12.4 (16E195)
Report Version: 12
Anonymous UUID: A816A6BA-C97F-6831-E59F-1431A005F23C
Sleep/Wake UUID: 48F2FC89-DF11-4A13-ACEB-E81AF10174B0
Time Awake Since Boot: 15000 seconds
Time Since Wake: 7900 seconds
System Integrity Protection: enabled
Crashed Thread: 4
Exception Type: EXC_CRASH (SIGILL)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Exception Note: EXC_CORPSE_NOTIFY
Termination Signal: Illegal instruction: 4
Termination Reason: Namespace SIGNAL, Code 0x4
Terminating Process: qemu-system-i386 [5779]
And here is the full stack trace: https://pastebin.com/raw/Btt2igX4
Disabling / Uninstalling CylancePROTECT solved this issue for me.
sudo launchctl remove com.cylance.agent_service
The same software was also preventing me from compiling go programs.
Some memory protection is at the source of the problem. Here is the relevant article for some fine tuning of CylancePROTECT that could resolve the issue with uninstalling completely the software: runtime: bsdthread_register fatal error (CylancePROTECT)
I solved it by go to ADV manager -> Select Virtual Device -> edit icon -> Select Graphics to Software GELS-2.0
I have a problem with launching my VD from cmd, I'm using Eclipse Version: 4.2.1.v20130118-173121-9MF7GHYdG0B5kx4E_SkfZV-1mNjVATf67ZAb7
Build id: M20130204-1200
And when I want to launch my emulator with proxy, because I can't get Internet on it...
I launch VD from cmd with command - C:\Users\user\Desktop\adt-bundle-windows-x86-20140702\sdk\tools>emulator -avd phone -http-proxy 219.69.104.232:8080 but when I hit Enter it gives me an error - creating window 27 27 480 854
FATAL:.//android/base/sockets/SocketWaiter.cpp:89:Check failed: isValidFd(fd). f
d 1036 max1024
Error accepting connection, aborting
So how I can launch my VD with proxy settings for Internet working in all phone?
Had the same problem twice: first time it happened, I fixed it by adding -no-audio to my AVD arguments.
Second time around, even the first fix didn't work. It only got fixed when I freed up some memory in the host PC (it has 8 GB RAM, but I had to close teamviewer).
I have tried to boot my emulator on three different platforms windows 7, ubuntu 12.04 and kubuntu 13.10(fresh install). However it always stops here with the logcat looping with the output below.
Could anyone help me figure this out. It is quite frustrating and I have lost close to a week of development.
D/AndroidRuntime( 3143): >>>>>> AndroidRuntime START com.android.internal.os.ZygoteInit <<<<<<
D/AndroidRuntime( 3143): CheckJNI is ON
E/dalvikvm( 3143): Can't create markStack
W/dalvikvm( 3143): CreateJavaVM failed: dvmGcStartup failed
E/AndroidRuntime( 3143): JNI_CreateJavaVM failed
I/Netd ( 3161): Netd 1.0 starting
W/InterfaceController( 3161): Warning (dlopen failed: library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
D/AndroidRuntime( 3162):
I run into similar issue when I replaced libcrypto.so with my version. As restored /system/lib/libcrypto.so with original copy, things worked fine.
This happened unexpectedly on my Android 12 emulator. It would no longer boot up, and instead just get stuck on the black screen that has the word "android" in white letters, with a gray fade animation over the letters.
The logcat output would just have repeated displays of this every 10 seconds or so:
E/AndroidRuntime( 3143): JNI_CreateJavaVM failed
I couldn't find a way to fix it, so I just deleted the emulator and recreated it again, in Android Studio -> Tools -> Device Manager -> Create Device -> select a suitable screen size and a name -> Next -> press the tab "x86 Images" -> then select the Android 12 API 31 image that you have already downloaded.