I have a google nexus 7 tablet and i am able to test the application in eclipse through usb debugging over USB cable, but i need to debug over wifi which is connected in my nexus 7 tablet and my PC is connected through Ethernet cable.
Both have internet connected with the same router, i.e PC with "ethernet" and tablet with "Wifi"
i have made a try like below
adb tcpip 5555
adb connect 10.0.0.7(this is my device ip address)
but no luck..
How do i achieve the wireless debug application from this scenario..
Helps appreciated..
Enable wireless debuging from developers options and get the ip adress of tablet. You may need some custom roms to have this feature.
Go to the adb.exe directory. It should be in sdk/platform-tools
Open the command prompt there.
Write the command
adb connect 192.168.1.32 (Where your devices ip adress)
Good luck
Related
I've been able to use wireless debugging on an Android 11 phone over Visual Studio on Mac, mainly because it explicitly has 'Wireless Debugging' option.
But I couldn't find similar option on an Android 8 phone.
So is it possible to debug wirelessly on older Android phones?
Yes, you can but its not completely wireless you will have to connect via USB once forward the port then have adb debugging over wifi
More details here
Connect the device via USB with "USB debugging enabled"
run adb tcpip 5555
Disconnect the USB cable from the target device
find local ip of the device on the network
run adb connect device_ip_address:5555
We have to attach mobile with the laptop through USB cable during development. Because, often usb cable got disconnect and mobile connection got lost and again need to install whole App.
Is there any option do it wireless ?
through wifi or hotspot something ?
Yes, It is possible to wirelessly debug your application through adb over wifi.
Make sure your development machine and your device is on the same wifi network
Connect your device via USB
On console type : adb tcpip 5555
Disconnect USB and find the IP of your testing device (Settings -> About Phone -> IP Address)
On console type : adb connect YOUR_IP_ADDRESS
For future convenience you may assign a static IP address to your testing device on the router.
Pure WiFi Solution (No USB Cable Required)
In Android version 11 and later, you can connect ADB and test Flutter apps on your phone without a USB cable, using WiFi pairing.
Enable developer options on your device if necessary and go to "Settings -> System -> Developer Options -> Wireless debugging".
Enable wireless debugging and click on "Pair device with pairing code", which shows an IP address, port, and pairing code.
Run adb pair <ip>:<port> <pairing code> to pair with your device.
Go back to the main "Wireless debugging" settings, which shows your same device IP but a different port, and then run adb connect <ip>:<different port> to connect ADB to your device.
You should now see your device listed in the output of adb devices and flutter devices.
Deploy your app to your device by running flutter run -d <ip> in your app folder, where <ip> is your device IP from the previous steps.
(I have a phone that won't connect over USB for some reason, so I needed this. The official Google docs I linked to above don't mention the adb connect step, which caused me much confusion.)
First, connect your phone to the laptop with a USB cable and ensure that you are able to debug. Then type this in your terminal or powershell window-
adb tcpip 5555
Unplug the USB cable and ensure that you are on the same wifi network (hotspots will work as well). Go to Settings > About Phone > Status Information and find your phone's IP address in the IP address section. Assuming your IP is 192.168.1.3, type the following in your terminal-
adb connect 192.168.1.3:5555
Remember that you have to repeat these steps everytime you restart your phone
first you must download the SDK Plateform tools https://developer.android.com/studio/releases/platform-tools
and extract the file.
after extracting the file, open this file in cmd and run :
adb tcpip 5555,
adb connect your_ip_adress:5555 make sur you device is connected to the same wireless and the last command is
flutter run to run the app
we know how to develop and connect wirelessly over Android phone to Android Studio.
Is there a way to connect to same mobile which internet we are using by making portable hotspot ?
Yes I have done it for long time. connect the laptop to you phones hotspot, then go to the about phone->status see the ip address and the connect mobile with laptop with usb cable and run command adb tcpip 5555 then adb connect <your ip addrss> Now you can disconnect your usb cable. Your mobile will be shown in the run dialog.
Note: you must have adb on your pc and its path declared in the environment variables.
I have problems trying to do wireless debugging.
I followed this instruction: https://developer.android.com/studio/command-line/adb#wireless
And it seems that I cannot connect to my phone at step 7 of the article adb connect device_ip_address.
It said cannot connect to 192.168.1.35:5555: No connection could be made because the target machine actively refused it. (10061)
I tried searching for the solution in stackoverflow but the answers do not suit my situation. They said to make sure that I connect to the same network and I'm pretty sure I am connected to the same network. I see my phone is connected to wifi name "Chor" And PC is also connected to the same name. I can even ping phone IP in the command prompt and receive a good response.
Any clues about what could be the issue?
The phone I use is Huawei P30 Lite.
I'm using Windows 10.
that Occurs due to
device is Restarted
device is connected to another computer or computer is debugging another device
turn offing the developer options of device
Follow those Steps to resolve that problem,
Connect your device to PC by USB cable to pc(one time requirement) and and turn on usb debugging it will connect successfully, allow for connection in device for promoted message.
2)then type this Command in terminal "adb tcpip 5555"
now remove the USB cable and connect device with pc with wifi
now type this command "adb connect <your_ip>"
you're all done !!
I have accidentally found the solution now!
It seems to be a phone issue (specifically Huawei phone).
It keeps turning off USB debugging mode by itself so what I had to do was to prevent it from turning off USB debugging mode.
I am not clearly sure of what is the exact step that fixed the issue but here's everything I did in Developer options:
Revoke USB debugging authorizations
Allow ADB debugging in charge only mode (I think this fixed the issue)
Turn off Always prompt when connecting to USB
Seems like there are some bugs with authorization conditions across different manufacturers. To get your target device to trust your computer, you need to go through more than just approving the computer's MAC address.
After some modifications of #off99555's answer, this is the solution for OnePlus 7 T/Pro devices on OxygenOS 10 (Android 10.x). Might be device manufacturer specific:
Revoke USB debugging authorizations
Connect target device via USB
Change USB usage mode to "File Transfer"
Run 'adb connect 192.168.x.x:5555'
The target device should recognize your computer now, and you can unplug USB and use ADB wireless now. Note that if you revoke USB auth in the future, you will have go through these steps again.
I ran into this error message when attempting to debug my Samsung Galaxy watch and it turns out that the Samsung Galaxy watches run on the Tizen OS and are not meant to be connected to Android Studio via adb. In order to develop apps for these devices, you will need to use Tizen Studio and connect to your device via sdb.
I'm facing the same issue then I'm restart everything like Phone, Android Studio/VS Code, and restart Computer. then solved.
Some of the commands you can try.
adb tcpip 4568
adb connect <Your device IP>:4568
adb disconnect
adb kill-server
in my case it showed wrong device ip when i ran ipconfig command. so check your device ip and try again
check your wifi debugging ip address
developer option -> wifi debugging
As other mentioned about the process you should first clean the path for connection. But try these two important points
1- Change adb to .\adb
.\adb kill-server
.\adb usb
.\adb tcpip 5555
.\adb connect 192.168.1.34:5555
2- Just you can keep one IP and for the next must clean the path!
Points:
1- As you know, we can set the IP address for a real phone in Static
2- If use a real phone by android 11, need to turn on Wireless debugging, then find the IP & Port
Solved:-
Just once connect your mobile with USB and allow the permission pop-up on the mobile screen, and then try to connect on wifi, it will connect.
Make sure you are using a cable that can transfer data, and that the device appears in the devices list when the cable is connected.
For device list run command:
adb devices
While the device is still connected enter the connecting command, with the IP address from the device wifi settings.
adb connect ip_address
I was debugging my xamarin android app on Phone1 over wifi by connecting to xxx:xxx:x:xxx:5556.
I tried to debug the app over wifi on Phone2 where only usb debugging was the straight forward option.
The commands I had used to connect to Phone2 are adb tcpip 5555, adb connect xxx:xxx:x:xxx:5555.
Now I am trying to connect back to Phone1:
adb connect xxx:xxx:x:xxx:5556 and it is giving me the error:
"unable to connect xxx:xxx:x:xxx:5556:5555: cannot resolve host 'xxx.xxx.x.xxx:5556' and port 5555: No such host is known"
How can i resolve this?
Try this sequence of actions/commands in order to debug a USB host device over WiFi:
stop USB host
connect the USB debug cable
adb kill-server
adb tcpip 5555
adb devices
should show something like
List of devices attached
99679a67 device
find your device IP address and:
adb connect 192.168.14.94:5555
adb devices
should show something like
List of devices attached
99679a67 device
192.168.14.94:5555 device
disconnect the USB debug cable
adb connect 192.168.14.94:5555
should show
connected to 192.168.14.94:5555
adb devices
should show
List of devices attached
192.168.14.94:5555 device
Start USB host on the device, if needed. ignore if you just need WiFi debug
debug freely over WiFi
You have to run adb tcpip 5556 before running adb connect xxx:xxx:x:xxx:5556
Google just updated the feature and officially support wifi debugging from Android 11 onwards. Follow these steps to setup your device to build and debug wirelessly using your wifi connection:
On your Android 11 device, go to your Settings -> Tap on Advanced and go to the Developer options.
Then tap on Wireless Debugging switch, and always allow wireless debugging for your personal wireless network in the popup dialog
Then tap on the Wireless Debugging option and select “Pair device with pairing code” and it will give you a 6 digit code and IP address as you can see in the image
There are many ways of doing pairing the phone to your computer. For the simplest one, inside Visual Studio, go to Tools -> SDK Command Prompt and type the IP address and port from your phone above into the terminaladb pair {ipaddress}:{port}.
Then take the IP Address and port from the last screen and enter the following command adb connect {ipaddress}:{port}.
There’s a lot more details in this article Including limitations and a comparison with the iphone wireless debug feature