I need to "rename" bluetooth paired device of Android phone with programming. But searching results are most discuss about local bluetooth rename method. And it could use setname() to complete. Does there have any method to rename "paired device" of Android phone ?
I know the question is old, but I just needed this and found out how to do it. It uses reflexion so I'm not sure this is the best way to go but it works.
public void renamePairDevice(BluetoothDevice device, String name)
throws IllegalAccessException, InvocationTargetException, NoSuchMethodException
{
Method m = device.getClass().getMethod("setAlias", String.class);
m.invoke(device, name);
}
I don't think you can rename the name of the paired device. You can only change the name from the paired device's settings.
Think of it like a wifi router, you cannot change the name of the router, but you can only connect to it.
However if you want,you could assign this way
Set<BluetoothDevice> devices = btAdapter.getBondedDevices();
if (devices.size() > 0) {
for(int i=0;i<device.size();i++) {
mDevice[i] = device;
bondedDevices.add(mDevice.getName());
}
}
That way you could get the name of the paired Devices as a mDevice array. Hope it solved your issue
Related
I'm trying to build an app which gets battery level of currently connected Bluetooth headset. This app can be used on phones which don't have this functionality built-in.
While searching on stackoverflow, I found How to get Bluetooth Headset battery status in android this question. I got the currently connected Bluetooth headset using BluetoothProfile.HEADSET profile.
But in the device object of type BluetoothDevice I don't see any method or property to get battery level of Bluetooth Headset.
I can get the device name and isAudioConnected.
If question is about Bluetooth HFP feature: HF indicators feature is optional for the both sides. If the both sides support it, BluetoothHeadset will broadcast BluetoothHeadset.ACTION_HF_INDICATORS_VALUE_CHANGED with BluetoothHeadset.EXTRA_HF_INDICATORS_IND_ID equal 2 (Battery Level) and BluetoothHeadset.EXTRA_HF_INDICATORS_IND_VALUE with scope 0..100. Do not remember Android version were it was implemented, you should check it.
Also battery level can be implemented in device using vendor specific HFP AT commands (especially for old handsfree devices) and maybe BLE.
I found a solution, but it only works on android 8 and above
I took this code from here
Kotlin
fun getBatteryLevel(pairedDevice: BluetoothDevice?): Int {
return pairedDevice?.let { bluetoothDevice ->
(bluetoothDevice.javaClass.getMethod("getBatteryLevel"))
.invoke(pairedDevice) as Int
} ?: -1
}
The first thing to register BroadcastReciver by "android.bluetooth.device.action.BATTERY_LEVEL_CHANGED"
and you can receive this action by the broadcast receiver then get extra data by "android.bluetooth.device.extra.BATTERY_LEVEL"
and if you want to trigger this action, you need to reconnect your Bluetooth device or Bluetooth device battery level happened to change.
Good luck for you.
Connected AirPods Pro to OnePlus 5T with Android 9.
None of those registered events happen:
"android.bluetooth.device.action.BATTERY_LEVEL_CHANGED"
"android.bluetooth.headset.profile.action.AUDIO_STATE_CHANGED"
"android.bluetooth.headset.action.HF_INDICATORS_VALUE_CHANGED"
I am Able to achieve the handset battery Level in Java
try {
BluetoothDevice device = bluetoothAdapter.getRemoteDevice("Connected device ID");
java.lang.reflect.Method method;
method = device.getClass().getMethod("getBatteryLevel");
int value = (int) method.invoke(device);
result.success(value);
} catch (Exception ex) {
result.error("invalid_argument", "'deviceId' argument is required to be string", null);
break;
}
This is #Kirill Martyuk answer as an Extension variable
val BluetoothDevice.batteryLevel
get() = this.let { device ->
val method = device.javaClass.getMethod("getBatteryLevel")
method.invoke(device) as Int?
} ?: -1
Usage would be something like
val manager = context.getSystemService(Context.BLUETOOTH_SERVICE) as BluetoothManager?
val adapter = manager?.adapter
val devices = adapter?.bondedDevices.orEmpty()
devices.forEach { device ->
Log.d("DEVICE_NAME", device.name)
Log.d("CHARGE_LEVEL", device.batteryLevel.toString())
}
I'm struggling for a while with the aforementioned problem. I'd like to get a list of paired bluetooth devices (this seems to be fine by now) and being aware of what the required bluetooth module's MAC address is, simply selecting this MAC address and using it later as a parameter. I'm having troubles with trying to pick out the 30:14:10:17:06:93 address from the list.
Here is my code snippet:
Set<BluetoothDevice> pairedDevices = mBluetoothAdapter.getBondedDevices();
TextView devicesInPairWithPhone = (TextView) findViewById(R.id.devicesInPairWithPhone);
devicesInPairWithPhone.setText(pairedDevices.toString());
for (BluetoothDevice device : pairedDevices) {
if (device.toString().equals("30:14:10:17:06:93")) {
mDevice = device;
textView.setText(device.toString());
}
else {
textView.setText("Selecting the correct bt module was unsuccessful.");
}
}
In this case on textView (I know, not an intuitive name, sorry for that) I get "Selecting the correct bt module was unsuccessful." all the time, i.e. the if(){} condition is never met. On devicesInPairWithPhone I get a fair set though: [30:14:10:17:06:93, 6C:0E:0D:E2:blablabla, ...]
Does someone have any idea what the problem might be? Thank you in advance!
Okay, my fault, I didn't pay attention to the fact that as the loop is iterating it will eventually print out "Selecting the correct bt module was unsuccessful." for the last element of the Set, thus this is what we will see on the screen.
Following a lot of answers here, I am able to build the list of connected bluetooth devices with the help of a BroadcastReceiver. Now my question is how do I know which device supports which profile. I want to be able to pick the devices based on the profile, for example, get a list of currently connected devices and their profile, and pick one of them. I don't see how I can get such info if I have the instance of BluetoothDevice.
On this page there are some codes illustrating how to work with a bluetooth headset profile: http://developer.android.com/guide/topics/connectivity/bluetooth.html#Profiles. But it doesn't solve my problem. If you think I am missing anything, please help me and point it out.
Thanks a lot in advance.
I've run into the same problem. It doesn't appear that you can get the available profiles from the BluetoothDevice class.
But there is a long way around by getting a List of BluetoothDevices from the getDevicesMatchingConnectionStates method in the BluetoothProfile class.
For example if you want to find which BluetoothDevices support A2DP, first create a custom BluetoothProfile.ServiceListener
public class cServiceListener implements BluetoothProfile.ServiceListener {
private static final int[] states={ BluetoothProfile.STATE_DISCONNECTING,
BluetoothProfile.STATE_DISCONNECTED,
BluetoothProfile.STATE_CONNECTED,
BluetoothProfile.STATE_CONNECTING};
#Override
public void onServiceConnected(int profile, BluetoothProfile bluetoothProfile) {
List<BluetoothDevice> Devices=bluetoothProfile.getDevicesMatchingConnectionStates(states);
for (BluetoothDevice loop:Devices){
Log.i("myTag",loop.getName());
}
}
#Override
public void onServiceDisconnected(int profile) {
}
}
Then attach it to the profile you want to check, in this example A2DP
mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter();
cServiceListener mServiceListener=new cServiceListener();
mBluetoothAdapter.getProfileProxy(thisContext,mServiceListener, BluetoothProfile.A2DP);
This will logcat all the bluetooth devices that support A2DP which are in the requested states. In this example it includes all devices which are currently connected and previously paired devices which are disconnected.
Looking at the Android source code, you can guess which profiles are available for a device by looking at its UUIDs, and then connect each profile one by one.
Step 0 : Copy the _PROFILE_UUIDS constants from there : https://android.googlesource.com/platform/packages/apps/Settings/+/9ad703cdb9a8d0972c123b041d18aa7bbeb391a4/src/com/android/settings/bluetooth/LocalBluetoothProfileManager.java
Step 1 : get your BluetoothDevice, via scanning for instance. Assure that it's properly bonded.
Step 2 : register a BroadcastReceiver for the android.bluetooth.BluetoothDevice.ACTION_UUID action intent
Step 3 : on your device, call the fetchUuidsWithSdp method
Step 4 : you will recieve a ACTION_UUID broadcast : in the onReceive method you can unregister the receiver, and get the list of profiles like so :
ArrayList<Integer> profiles = new ArrayList<>();
ParcelUuid[] uuids = device.getUuids();
if (BluetoothUuid.containsAnyUuid(uuids, HEADSET_PROFILE_UUIDS))
{
profiles.add(BluetoothProfile.HEADSET);
}
if (BluetoothUuid.containsAnyUuid(uuids, A2DP_PROFILE_UUIDS))
{
profiles.add(BluetoothProfile.A2DP);
}
if (BluetoothUuid.containsAnyUuid(uuids, OPP_PROFILE_UUIDS))
{
//OPP doesn't have any BluetoothProfile value
}
if (BluetoothUuid.containsAnyUuid(uuids, HID_PROFILE_UUIDS))
{
//You will need system privileges in order to use this one
profiles.add(BluetoothProfile.INPUT_DEVICE);
}
if (BluetoothUuid.containsAnyUuid(uuids, PANU_PROFILE_UUIDS))
{
profiles.add(BluetoothProfile.PAN);
}
Step 5 : get the proxies for the profiles, one by one :
for (int profile : profiles)
{
if (!adapter.getProfileProxy(context, listener, profile))
{
//Do something
}
}
Step 6 : do anything with each proxy retrieved in the onServiceConnected method of your listener. You can access the connect method using relfection.
I'm writing an Android app which receives information from a Bluetooth device. Our client has suggested that the Bluetooth device (which they produce) will change its name depending on certain conditions - for the simplest example its name will sometimes be "xxx-ON" and sometimes "xxx-OFF". My app is just supposed to seek this BT transmitter (I use BluetoothAdapter.startDiscovery() ) and do different things depending on the name it finds. I am NOT pairing with the Bluetooth device (though I suppose it might be possible, the app is supposed to eventually work with multiple Android devices and multiple BT transmitters so I'm not sure it would be a good idea).
My code works fine to detect BT devices and find their names. Also, if the device goes off, I can detect the next time I seek, that it is not there. But it seems that if it is there and it changes name, I pick up the old name - presumably it is cached somewhere. Even if the bluetooth device goes off, and we notice that, the next time I detect it, I still see the old name.
I found this issue in Google Code: here but it was unclear to me even how to use the workaround given ("try to connect"). Has anyone done this and had any luck? Can you share code?
Is there a simple way to just delete the cached names and search again so I always find the newest names? Even a non-simple way would be good (I am writing for a rooted device).
Thanks
I would suggest 'fetchUuidsWithSdp()'. It's significance is that, unlike the similar getUuids() method, fetchUuidsWithSdp causes the device to update cached information about the remote device. And I believe this includes the remote name as well as the SPD.
Note that both the methods I mentioned are hidden prior to 4.0.3, so your code would look l ike this:
public static void startServiceDiscovery( BluetoothDevice device ) {
// Need to use reflection prior to API 15
Class cl = null;
try {
cl = Class.forName("android.bluetooth.BluetoothDevice");
} catch( ClassNotFoundException exc ) {
Log.e(CTAG, "android.bluetooth.BluetoothDevice not found." );
}
if (null != cl) {
Class[] param = {};
Method method = null;
try {
method = cl.getMethod("fetchUuidsWithSdp", param);
} catch( NoSuchMethodException exc ) {
Log.e(CTAG, "fetchUuidsWithSdp not found." );
}
if (null != method) {
Object[] args = {};
try {
method.invoke(device, args);
} catch (Exception exc) {
Log.e(CTAG, "Failed to invoke fetchUuidsWithSdp method." );
}
}
}
}
You'll then need to listen for the BluetoothDevice.ACTION_NAME_CHANGED intent, and extract BluetoothDevice.EXTRA_NAME from it.
Let me know if that helps.
Is there a way, using the Android SDK, to programmatically connect to an already-paired Bluetooth device?
In other words: I can go into Settings -> Wireless & networks -> Bluetooth settings, and tap the device (listed as "Paired but not connected"), at which point it will connect. I'd like to be able to do this programmatically, but don't see a way to do this.
I see the options to create an RFCOMM socket, and for a SPP device, I'm assuming that'll do the connection part as well, but for an A2DP device, where the actual data transfer will be handled by the OS rather than by my app, I think that's not applicable?
Okay, since this was driving me crazy, I did some digging into the source code and I've found a 100% reliable (at least on my Nexus 4, Android 4.3) solution to connect to a paired A2DP device (such as a headset or Bluetooth audio device). I've published a fully working sample project (easily built with Android Studio) that you can find here on Github.
Essentially, what you need to do is:
Get an instance of the BluetoothAdapter
Using this instance, get a profile proxy for A2DP:
adapter.getProfileProxy (context, listener, BluetoothProfile.A2DP);
where listener is a ServiceListener that will receive a BluetoothProfile in its onServiceConnected() callback (which can be cast to a BluetoothA2dp instance)
Use reflection to acquire the connect(BluetoothDevice) method on the proxy:
Method connect = BluetoothA2dp.class.getDeclaredMethod("connect", BluetoothDevice.class);
Find your BluetoothDevice:
String deviceName = "My_Device_Name";
BluetoothDevice result = null;
Set<BluetoothDevice> devices = adapter.getBondedDevices();
if (devices != null) {
for (BluetoothDevice device : devices) {
if (deviceName.equals(device.getName())) {
result = device;
break;
}
}
}
And invoke the connect() method:
connect.invoke(proxy, result);
Which, at least for me, caused an immediate connection of the device.
the best way I found to solve my problem was finding out that I can create a button that brings up the Bluetooth Settings screen. I didn't realize you could do this, or I would have from the beginning.
startActivity(new Intent(Settings.ACTION_BLUETOOTH_SETTINGS));
if the device is already paired , then you can use
if(device.getBondState()==device.BOND_BONDED){
Log.d(TAG,device.getName());
//BluetoothSocket mSocket=null;
try {
mSocket = device.createInsecureRfcommSocketToServiceRecord(MY_UUID);
} catch (IOException e1) {
// TODO Auto-generated catch block
Log.d(TAG,"socket not created");
e1.printStackTrace();
}
try{
mSocket.connect();
}
catch(IOException e){
try {
mSocket.close();
Log.d(TAG,"Cannot connect");
} catch (IOException e1) {
Log.d(TAG,"Socket not closed");
// TODO Auto-generated catch block
e1.printStackTrace();
}
}
for the MY_UUID use
private static final UUID MY_UUID = UUID.fromString("0000110E-0000-1000-8000-00805F9B34FB");
the above code snippet is just to connect your device to an A2DP supported device.
I hope it will work.
I used the code here as a starting point for this functionality in my app: http://developer.android.com/guide/topics/wireless/bluetooth.html#ConnectingDevices
Once the device is paired, the app has no problem connecting the two devices together programmtically.