I have a rather complicated List with nested RecyclerViews. I get it that nested RecyclerViews aren't the best solution, but in my case it is one of few solutions that create structured code and meet the requirements. I have attached an image of the structure. You can take telegram as an example to improve your understanding of the structure. Basically I have an outer RecyclerView RV-1 with Items RV-1-Item and an inner RecyclerView RV-2 with Items RV-2-Item. So far so good, my problem is that the outer RecyclerView recycles views as intended, but if one of the RV-1-Items comes into view, all ViewHolders of RV-2 are created (That means that sometimes more than 100 ViewHolders are created). To sum it all up my question is how to force the inner RecyclerView RV-2 to recycle ViewHolders as well.
I know that the inner RecyclerView RV-2 has to have a hight of wrap_content because it depends in the count of the inner items, also i cannot set setHasFixedHeigth(true) (and I don't know if it would help) because during runtime new RV-2-Items can be added into RV-2. I also tried to set setNestedScrollingEnabled(false) on RV-2 because I read a lot about it online but it didn't help me either.
So basically this is how I configure
RV-1
layoutManager = LinearLayoutManager(context)
isNestedScrollingEnabled = false
RV-2
setHasFixedSize(true)
layoutManager = LinearLayoutManager(context).apply {
reverseLayout = true
}
In addition to that I have some ItemDecorators but they only create the space between the items, so they shouldn't have to do anything with the problem.
To sum it all up:
The outer RV-1 recycles it ViewHolders as intended but the inner RV-2 creates all ViewHolders at once, even if they are not on screen. I assume that this is the case because RV-2 has a height of wrap_content and when the layout_height need to be measured it needs to create all views. THE QUESTION: Is there a way to force RV-2 to recycle its views?
EDIT:
Also I am using a shared RecycledViewPool between all RV-2 RecyclerViews but that isn't really related to the problem, because even if the ViewHolders are shared between the RecyclerViews, an RV-2 RecyclerView shouldn't create ViewHolders that aren't visible when it is initialised.
EDIT 2:
A lot of comments and related questions say that two vertical nested RecyclerViews isn't a possible thing in android, in case all visitors of this question think the same my question is: How would you implement such a structure. It is obvious that I could make a single view which has a IM (Round Image View) and RV-2-Item and just make the IM invisible when it isn't needed. In my opinion this somehow makes the structure more complicated. Furthermore a requirement is that the IM on the left side of RV-1-Item must have the ability to move up and down in RV-1-Item, which is obviously easier with my current structure.
EDIT 3: (My last one I promise)
The Problem I have shown can be solved by using the approche I explain in my EDIT 2, even if it isn't the best solution it would work. But the issue is that I have an even more complex screen where this approche wouldn't work anymore because I have three nested RecyclerViews. I could get that number down to two with the approche of EDIT 2 but I would still be left with two nested RecyclerViews and I cannot think of a workaround that could solve the problem of the remaining two nested RecyclerViews. I attached an image of the even more complex screen which contains a the interface of the app with marked sections to help you to understand the structure.
(Not quite an answer to your specific question in solving "how to not get the RecyclerView to create all items at once", but something that most likely will fix your specific problem by not using nested recyclerviews at all)
I would suggest (in a quite similar way as already suggested in this answer), to flatten your feed into one recyclerview
(No matter how much you tweak your nested recyclerview architecture, imho it will never be as performant than having just one recyclerview, and as you don't need nested scrolling (I guess), just one recycler view should be your best option).
I would propose to not think of your feed in the way your data is structured, but in a way you want to show it and how it can be split into smaller items which are "look alikes" / consist of the same things.
From your screenshot I would see for example the following items / view types for each chat item:
Chat header (the thing with the icon and the text "New Group")
the user badge (the picture with the text "Jürgen")
a message item (one bubble of text, so e.g. in your screenshot at the bottom there would actually be 3 of those items, one for each message)
The section with the date and the action/reply items.
Those items are way smaller than a whole chat item, and therefore can be faster created / recycled.
For each of those items, create a view-type and a view-holder, and treat them as seperate recycler-view items.
The recyclerview will, when the getItemViewType method is correctly used, create / prepare the correct type of view for the position you need.
For this to work, the adapter needs to add some logic, as your data most likely will be structured something like
a list of chats, and each chat has a name and some messages to display
and we need it as
the first 6 elements are for the first chat, where the first position
is the header, the second the user badge, the next 3 items are message
items and then we need an action item.
So you basically need to calculate how many recyclerview items you will need to show each single chat-item, which could be a calculation along the lines:
1 chat header item + 1 user badge item + 3 message items + 1 action/reply item = 6
This calculation needs to be performed for each chat item of your data list separately.
So if you only have this single chat item in your list of data to display, you actually need to tell the adapter to create 6 items (by returning in this case 6 at getItemViewCount()).
Then, you need to tell the adapter using the getItemViewType(position: Int) function, at which position of the recyclerview which type of view the adapter needs to prepare.
So there you again need some logic to say that e.g. on position 0 the chat header for the first chat item should be, at position 1 the user badge for the first chat item, at position 2-4 message items should be, on position 5 the action item and at position 6 the chat header for the second chat should be and so on
(again, the logic then needs to be in place for all chat items, and it can get really messy / complicated, as to calculate each chat items view types for a position, e.g. all prior chat element view counts need to be recalculated, too (in order to know at which recycler-view position your current chat item starts)).
As this tends to blow your adapter up, I would suggest (if you don't already do so), to get some manager / delegate architecture in there.
So e.g. have a delegate for each view type, and a manager which calculates the number of recyclerview items / view types needed for each chat item.
Just for reference:
Some time ago we had a situation similar to yours
(a recycler-view with a design similar to a social media feed, which should show the first n comments in the feed and we displayed the comments for each feed item (which was a recyclerview item) with another recyclerview in the item) and also after some troubles with performance which we could not manage to resolve just flattened the recyclerview, and never had performance troubles again.
A lot of comments and related questions say that two vertical nested RecyclerViews isn't a possible thing in android
This is not true; whoever says this is not a thing has not done it and thinks it's not possible. It is possible, albeit with complications, side-effects, and most likely, the annoyance of your users when they tap around trying to scroll up/down and the wrong touch interceptor wins.
Why is this a problem?
On iOS, when you try to do something that the platform devs didn't think it was good, most people and other devs scream at you: don't fight the framework!!!.
On Android, we see the craziest Java (and now Kotlin) implementations of things that makes you wonder what are we -developers- learning at school and what are we teaching?! and yet nobody says anything (for the most part) :p
The truth is, you're trying to design a complicated user interaction and data transformation, and yet, your attempt is biased by trying to use the data "as you have it" (which implies dealing with these two different RV/Adapters), as opposed to do what one should do: transform the data for presentation.
This leads me to the next question:
How would you implement such a structure.
Well, for starters, I don't know how your data looks like, nor where it's coming from; I don't know what your users can do with your data, outside of the obvious scrolling.
I also don't know how your data wants to be presented, aside from your mock up.
But I do know the situation very well. A list of things, which also contain their own list of things.
Case: The List of List
It is doable; you can have a list and inside said list, have another list. I've done it. I've seen it done by others. I've used it. I also never liked the idea of having this "small" scrollable thing, fighting to see who scrolls first when I tap "the wrong place".
I would not do this. If the inner-list is big (say more than 3 items per outer item), I would not present it as scrollable content.
What I would do (considering the things I do not know about your problem) is to have a single list displaying all the content properly flattened.
This has a issue with your content:
What if the inner-lists are super long, wouldn't this cause them all to be displayed? YES, and that's why I wouldn't do it this way if the data (as you described) can have 100 items. An options is to display the 3 first items with a "more" link to now open the inner-list "full screen"; this is 10 times better than the nested list from a user's PoV and from the technical aspect of it.
Another alternative, is to keep this single long list (RV-1) and let users "expand" the list to launch another full-screen list depicting the contents of RV-2, in a separate window. This is even better.
The time you'll spend implementing this and getting rid of the mess of code you probably have right now, will make you wonder why didn't you suggest this in the first place.
If this is something you absolutely cannot do, then I cannot offer you much more advice, for now you're tied to unknown to me business/product rules. Ultimately, the price will be paid by the users of your app, when they have to scroll that nightmare :)
Take a Step Back
Let me be clear, I am not criticizing you or your solution; I'm merely pointing out that, in my experience, this "pattern" you have here is not a good user experience.
Format your data for presentation, not the other way around. Your data should be properly shaped so it can be properly presented with the tools you have.
You're fighting against the tools Android is giving you; you're giving a RecyclerView (and its adapter) a lot of new problems to deal with when it already has a lot going on.
Think about it: RecyclerViews have to do a lot of things; Adapters must also conform to a few interfaces, ensure things are dispatched as soon as possible, calculate Diffs (if using a ListAdapter<T,V>), etc. Activities/Fragments? They have a lot on their plates dealing with ... well "Android"; now you're asking all these components to also handle a complicated scenario of scrolling content, touch recognition, event handling, view inflation, etc.
All this, while expecting each view to take 16ms or less (to stay above 60 FPS scrolling speed, your view/viewHolder should not take more than 16ms to do all it needs.
Instead, I'm asking you to take a step back, grab the data you have, compose it, transform it, map it, and create the data structure that can better serve the components you have (a RV + Adapter + a simple View).
Good luck :)
I want to create List view row animation like below . I want to move row from one list view to other list view. Both list view are in same activity.
Anyone can give me idea how I can do this.
First of all because you mentioned "ListView":
In my opinion the best way to perform dynamic "lists" in android is to use to android-given class
RecyclerView.
It's easy to use like a normal ListView but like I said before it handles dynamic data.
Moreover it has some support librarys like ItemTouchHelper to drag/drop and swipe items in the list around. Its very easy to expand your RecyclerView with this upgrade. Here is a good tutorial:
Tutorial.
I would like to give you two ideas how I would proceed to implement such a list like the example of your post:
1) (Recommended) Search on Github or similar sites for 3rd library parties that already solved this.
2) Use the RecyclerView with the ItemtouchHelper-Upgrade i mentioned above and try to expand it with two lists. When an item is onMove() set the visibility of the first list on GONE and the second on VISIBLE. Now you only have to add the data of your item to the second list and remove it from the first. Then use notifyDataSetChanged() on both lists and your done.
I dont know how difficult it will be to implement it but thats the only way I know how you can do that and how the programmers of your example could have done it.
I'm using Recyclerview to show a list. I want to delete some items like IOS. In my listview template I have added a button to delete item which is invisible by default. In my activity I have another button attached at bottom (Not part of listview) and on tap of this button I want to make all delete buttons of listview visible.
My Question is how can I get reference to all delete buttons of listview in activity and is it the right way to do this?
Thanks
Assuming you have ViewHolders set up, you already have references to all the buttons in your list. All you have to do is to make them visible for every item in the list with a simple loop.
In case you haven't implemented ViewHolders I suggest you check out the documentation and take a look at some simple tutorials on how to use them.
On a side note. If I understood correctly you're making a bottom tab for your app and since you referenced iOS I gotta say this; Remember that Android and iOS are two unique operating systems with their own ways of handling things. Check out Googles pure Android documentation.
In your question title you say RecyclerView, but in your text you say ListView. The solution is similar either way, but it's best to be perfectly clear what you're doing.
In either case, there are at least two different solutions.
First, you could use a boolean flag to determine if all the the item buttons should be showing or not. You check this flag at the time the item view is inflated or created and toggle the button accordingly. If the boolean flag is ever changed, the easiest thing to do is tell the RecyclerView/ListView that the underlying data has changed and to redraw all the views. Call notifyDatasetChanged on the adapter.
The other thing you can do at the time the item buttons should change is iterate all the visible item views, find the button, and change its visibility. With RecyclerView, you can do this, and with ListView you can do this.
This is not a code problem, I interpret the guidelines as that being OK.
I've been researching a way of building an infinitely scrolling calendar-like view in Android, but I've reached an impasse.
Right now my dilemma is that most of the similar views available have their children placed relative each other in a recurring style. With this I mean:
item 4 comes after item 3, which comes after item 2, and there is constant padding/margin between all items.
What I need is a way to produce an infinitely long scrollable view that may, or may not, contain items. The items should be placed at variable positions within the view. The best way I can describe a similar looking view is a one-day calendar-like view that is infinitely scrollable.
So far my best two bets are using the new RecyclerView with a custom LayoutManager (this seems very complex and still not perfectly documented by Google though). I like this approach because, among other things, it is optimized for displaying large sets in a limited view.
My other solution would be to build a completely custom View. However, with that solution I loose the adapter unless I build a container view (which is probably more complex than building a layout manager).
How would you go about solving such a problem? Tips are appreciated, I don't need code examples, just ideas which path is the best to solve this problem.
Thanks.
Apologies if I've misunderstood the guidelines
Edit: How I resolved this problem
My first solution to use RecyclerView with a special Decorator seemed promising, but it remained a "hack" so we decided not to go for that solution since we were afraid of the complications that it would create down the line.
To solve the problem I went with a SurfaceView instead of an Adapter, this means having to rewrite all the adapter-functionality for my SurfaceView but it seemed to be the best way of solving this issue of very custom drawing and layout managing for my use-case.
It still would be nice to build a custom Viewgroup that can handle this kind of layout problems.
ListView and ListAdapter are based on a fixed list, so the current infinite-scrollers just keep adding more and more data to the end of the list.
But what you want is scroller similar to Google's Calendar app which has a bi-directional infinite scroller. The problem with using ListView and ListAdapter in this case is that if you add data to the front of the list, the index of any one item changes so that the list jumps.
If you really start thinking about this from the MVC perspective, you realize that ListAdapter does not provide a model that fits this need.
Instead of having absolute indexing (i.e. 1, 2, 3, 4, etc), what you really want is relative indexing, so instead of saying "Give me the item at index 42" you want to say "here's an item, give me the five items before it". Or you have something like a calendar date which is absolute; yet — unlike your device's memory — it has effectively no beginning or end, so what you really want here is a "window" into a section of that data.
A better data model for this would be a kind of double-ended queue that is partly a LRU cache. You place a limit on the number of items in the structure. Then as prior items are loaded (user is scrolling up) the items at back end are pushed off, and when subsequent items are added (user is scrolling down), items at the front are pushed off.
Also, you would have a threshold where if you got within a few items of of one edge of the structure, a "loadNext" or "loadPrevious" event would fire and invoke a callback that you set up to push more data onto the edge of the structure.
So once you've figured out that your model is completely different, you realize that even RecyclerView isn't going to help you here because it's tied to the absolute indexing model. You need some sort of custom ViewGroup subclass that recycles item views like a ListView, but can adapt to the double-ended queue. And when you search code repos for something like this, there's nothing out there.
Sounds like fun. I'll post a link when I get a project started. (Sadly, it won't be done in any timely manner to help you right now, sorry.)
Something that might help you a little sooner: look at Google's Calendar implementation and see how they did it: Google Calendar Git repo
What you may be searching for is a FragmentStatePagerAdapter , where you can implement a swiped view, meaning when the user (for example)swipes to the right, a completely new view is displayed.
Using a FragmentStatePagerAdapter , you can handle a huge amount of views without overflowing the memory, because this specific PagerAdapter only keeps the views' states and is explicitly meant to handle large sets of views.
Keeping your example of a calendar, you can implement swiped navigation between for example weeks and generate the week views on demand while only keeping for example the year and the week's number as identifiers.
There are plenty of online tutorials for Android, maybe you have a look at this one
I'm working on creating a swipe-to-dismiss list view adapter. My basic methodology is to wrap the list item's view as the second view in a ViewPager and provide the necessary callbacks in the item change listener of the ViewPager. Through much pain I've got the View recycler working as intended, as well as ViewHolder and ViewBinder patterns implemented. I even managed to keep the ListView from taking over the touch events while the ViewPager is being scrolled without having to make a custom subclass of ListView (I can do it all from the Adapter).
Where I'm running into trouble is getting the selector and the OnItemClickListener to work. After looking at ListView's source it seemed that by overriding the ViewPager's hasFocusable() method to always return false (later on I'll pull this value from the child view) these things should have been reenabled. Unfortunately this is not the case. I've tried the setDecendantFocusability() workaround and I'm still stuck.
I'd like to avoid having to extend ListView if possible to provide the greatest amount of modularity. For similar reasons I don't want to add the selector to the ViewPager's background (if the dev changes the ListView's selector this wouldn't be reflected). Essentially I'm looking to make the ViewPager code transparent between the ListView and child View. Any ideas?
You are saying that you are making each list item a view pager, so that you can implement swiping to delete? If so... no no, this is not what view pager is for. First sorry it is just not intended to be used as an item in a list. Second it is for switching between views, not swiping to delete.
Unfortunately we don't have a sample code to show how to do this, but you can look at the platform's implementation of the notification pane or recent apps to get some ideas.