Related
While using android debug bridge remount, it changes the system folder to r/w, but
as soon as the user tries to copy some file using android debug bridge to the system folder it changes to read-only
If the device is not rooted, you cannot copy anything to the System or Data partitions.
With root do the following commands in a command prompt or linux shell and all should be fine:
adb push fileName /data/local/tmp
adb shell
su
mount -o remount, rw /system
cp /data/local/tmp/fileName /system/folderOfYourChoise
chmod 644 (if its an apk and you want the system to use it as a system app)
exit (exits the su shell)
exit (exits the adb shell)
adb reboot (to apply and see changes on the device)
I want to push some apk file to sd card, then to /system folder. I tried the following commands in order:
adb shell
su
mount -o rw,remount /system
adb push /data/app/com.project.android.xxx-2.apk /sdcard
But the last line always results in device not found error. I have even tried with system folder directly as, adb push /data/app/com.project.android.xxx-2.apk /system/app, but it gave me the same error. I have also tried to execute this line before push command:
chmod 644 /sdcard
But that didn't solve the push command problem.
My device is rooted.
Device driver is updated.
My device has sd card.
USB debugging mode is enabled.
When I write adb devices I get my device name.
What is causing this error, and how can I solve it?
You're executing adb push being already shell-ed into the device. By doing that you start another adb server on the target device now (not on your host machine), which is scanning ports in some range looking for devices attached. Since no device is found (attached to the target device) you get error: device not found. For the kind of task you're trying to achieve no need to use any of adb commands within shell.
Try either mv or cp command once you shell-ed in. For example (remounting part skipped):
adb shell
cp /data/app/com.project.android.xxx-2.apk /sdcard
I recently rooted my Droid X and everything seems to be working perfectly. I made some changes to build.prop and when I do adb push build.prop /system/ I get the following error: failed to copy 'c:\build.prop' to '/system//build.prop': Read-only file system.
How can I fix this?
Not all phones and versions of android have things mounted the same.
Limiting options when remounting would be best.
Simply remount as rw (Read/Write):
# mount -o rw,remount /system
Once you are done making changes, remount to ro (read-only):
# mount -o ro,remount /system
adb remount
works for me and seems to be the simplest solution.
While I know the question is about the real device, in case someone got here with a similar issue in the emulator, with whatever tools are the latest as of Feb, 2017, the emulator needs to be launched from the command line with:
-writable-system
For anything to be writable to the /system. Without this flag no combination of remount or mount will allow one to write to /system.
After the emulator is launched with that flag, a single adb remount after adb root is sufficient to get permissions to push to /system.
Here's an example of the command line I use to run my emulator:
./emulator -writable-system -avd Nexus_5_API_25 -no-snapshot-load -qemu
The value for the -avd flags comes from:
./emulator -list-avds
Got this off an Android forum where I asked the same question. Hope this helps somebody else.
On a terminal emulator on the phone:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
Then on the cmd prompt, do the adb push
I think the safest way is remounting the /system as read-write, using:
mount -o remount,rw /system
and when done, remount it as read-only:
mount -o remount,ro /system
adb disable-verity
adb reboot
adb root
adb remount
This works for me, and is the simplest solution.
On my Samsung galaxy mini S5570 (after got root on cellphone):
Fist, as root, I ran:
systemctl start adb
as a normal user:
adb shell
su
Grant root permissions on touch screen
mount
list all mount points that we have and we can see, in my case, that /dev/stl12 was mounted on /system as ro (ready only), so we just need do:
mount -o rw,remount /dev/stl12 /system
Try the following on the command prompt:
>adb remount
>adb push framework-res_old.apk /system/framework-res.apk
Here is what worked for me. I was running an emulated Android 7.1.1 (Nougat) device.
On a terminal, I hit the following command. One thing to be noticed is the -writable-system flag
./emulator -writable-system -avd Nexus_6_API_25 -partition-size 280
On another tab
./adb shell
su
mount -o rw,remount -t ext4 /dev/block/vda /system
All the changes that you do on the /system contents will survive a restart.
I checked with emulator and following worked.
adb reboot
adb root && adb remount && adb push ~/Desktop/hosts /system/etc/hosts
As mentioned above as well, execute second step in single shot.
Open terminal emulator on the phone:
then
adb shell
after that daemon is started
su
mount -o rw,remount /mnt/sdcard
then the read only is converted into the read-Write.
Sometimes you get the error because the destination location in phone are not exist. For example, some android phone external storage location is /storage/emulated/legacy instead of /storage/emulated/0.
mount -o rw,remount /dev/stl12 /system
works for me
This worked for me
#Mount as ReadOnly
su -c "mount -o rw,remount /system"
# Change Permission for file
su -c "chmod 777 /system/build.prop"
#Edit the file to add the property
su -c "busybox vi /system/build.prop"
# Add now
service.adb.tcp.port=5678
# Reset old permissions
su -c "chmod 644 /system/build.prop"
# Mount as readonly again once done
su -c "mount -o ro,remount /system"
I found this article from google, and thought I'd add the steps necessary on a Sony Xperia Z (4.2.2).
The Sony has a watchdog process which detects when you've changed ro to rw on / and /system (these are the only ones I was trying to modify) and possibly others.
The following was what I ran to perform the changes I was trying to achieve. I pasted these into a window, because removing the execute bit from /sbin/ric needs to be done quickly in order to stop it restarting itself. (I tried stop ric; this doesn't work - although it worked on a previous version of android on the phone).
pkill -9 ric; mount -o rw,remount -t rootfs /
chmod 640 /sbin/ric
mount -o rw,remount /system
I modified the hosts file here, so this is the place you make the changes you need to the filesystem. To leave things the way we found them, do this:
mount -o ro,remount /system
chmod 750 /sbin/ric
mount -o ro,remount -t rootfs /
At which point ric should automatically restart. (It restarted for me automatically.)
Adding a little bit more to Jan Bergström's answer: Because Android is a Linux based system, and the path in Linux contains forward slashes(../), while using push command, use "/" to define destination path in the Android device.
For Example, the command goes: adb push C:\Users\admin\Desktop\1.JPG sdcard/pictures/
Notice that here, back slashes are used to define source path of the file to be pushed from windows PC and forward slashes are used to define destination path because Android is a Linux based system. You don't have to act as a root to use this command and also, it works perfectly fine on production devices.
Thanks, Sérgio, for "mount" command without parameters idea.
I'd need to made adb push into /data/data/com.my.app/lib for some test issue, and get "Read-only filesystem" message.
ls command shows me:
root#android:/ # ls -l /data/data/com.my.app/
drwxrwx--x u0_a98 u0_a98 2016-05-06 09:16 cache
drwxrwx--x u0_a98 u0_a98 2016-05-06 09:04 files
lrwxrwxrwx system system 2016-05-06 11:43 lib -> /mnt/asec/com.my.app-1/lib
So, it's understood, that "lib" directory is separated from other application directories.
Command
mount -o rw,remount /mnt/asec
didn't resolve "r/o fs" issue, it wants device parameter before directory parameter.
"df" command didn't help also, but shows that my /mnt/asec/com.my.app-1 directory is at the separate mount point.
Then I looks by mount and voila!
root#android:/ # mount
.........
/dev/block/dm-4 /mnt/asec/com.my.app-1 ext4 ro,dirsync,relatime 0 0
Next steps are already described upwards: remount to RW, push and remount back to RO.
it sames that must extract and repack initrc.img and edit init file with the code of mount /system
Copy files to the SD-card?
Well, I assume you like to copy data to the Sd-card from the developers computer? You might have rooted the devise and made the area you address available?) I had about the same problem to upload data files for my application(Android Studio 1.3.2 in Win7), but.
First the adb command-shell has to be found in th path:
PATH=%PATH%;C:\Users\XXXXX\AppData\Local\Android\sdk\platform-tools (the folder AppData is hidden, so you have to set the folder setup not hiding concealed files and folder to find it, Path works regardless)
You have to spell the folder path right or you get a read-only error message, most likely it must start with /sdcard or it is read only area. As soon as I did no problem pushing the file to the emulator.
So for instance the the adb command can look like this:
adb push C:\testdata\t.txt /sdcard/download/t.txt
If there's a failure in copying the read-only file you can try locating the original file in the root directory and modify it with a root text editor (preferably) RB text editor, it comes with ROM Toolbox app.
Try this in a Terminal Emulator as root:
restorecon -v -R /data/media
In my case I was using the command adb push ~/Desktop/file.txt ~/sdcard/
I changed it to ~/Desktop/file.txt /sdcard/ and then it worked.
Make sure to disconnect and reconnect the phone.
As chen-xing mentioned the simplest way is:
adb reboot
But for me I had to change my settings first:
Settings → Developer options → Root access
Make sure ADB has Root access:
I just only needed this:
su -c "mount -o rw,remount /system"
I am trying to reach the sqlite database on my device using the procedure described here: How can i see SQLite Database (No emulator)?
However, I keep on getting sqlite3 not found.
I assume I am meant to be entering the commands with the hash (#) sign at the start of the line.
I tried with it and got nothing.
Without it I get the error message.
The sqlite3.exe file is definitely there and in the path.
Do I have to install something?
Some manufacturers deliver the devices without sqlite being installed on them. You can copy the sqlite program though from a emulator to your device if the device has an arm processor.
Start the emulator and use the adb command from the platform-tools in android-sdk
adb pull /system/xbin/sqlite3
Mount the system partition of your device read/write after this tutorial:
http://android-tricks.blogspot.com/2009/01/mount-filesystem-read-write.html
Use the adb command to copy the sqlite3 file to your device
adb push sqlite3 /system/xbin/
After you reboot your device the sqlite3 command should work.
Edit (copy from linked page - in the case link becomes invalid). The instructions for step 2 are:
adb shell
su
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
"Replace /dev/block/mtdblock3 & /system with appropriate device path and mount point, as obtained from cat /proc/mounts"
Go to Play store --> search for Titanium Backup & install it
adb shell
su
cp /data/data/com.keramidas.TitaniumBackup/files/sqlite3 /system/xbin/
cd /system/xbin/
chmod 755 sqlite3
adbd reboot (just in case)
Enjoy the result
For those who, like me, couldn't use Sqlite3, I used a workaround for this:
cat srcfile> / mnt / sdcard / dstfile
With this you can put the files into an external .db manager.
I recently rooted my Droid X and everything seems to be working perfectly. I made some changes to build.prop and when I do adb push build.prop /system/ I get the following error: failed to copy 'c:\build.prop' to '/system//build.prop': Read-only file system.
How can I fix this?
Not all phones and versions of android have things mounted the same.
Limiting options when remounting would be best.
Simply remount as rw (Read/Write):
# mount -o rw,remount /system
Once you are done making changes, remount to ro (read-only):
# mount -o ro,remount /system
adb remount
works for me and seems to be the simplest solution.
While I know the question is about the real device, in case someone got here with a similar issue in the emulator, with whatever tools are the latest as of Feb, 2017, the emulator needs to be launched from the command line with:
-writable-system
For anything to be writable to the /system. Without this flag no combination of remount or mount will allow one to write to /system.
After the emulator is launched with that flag, a single adb remount after adb root is sufficient to get permissions to push to /system.
Here's an example of the command line I use to run my emulator:
./emulator -writable-system -avd Nexus_5_API_25 -no-snapshot-load -qemu
The value for the -avd flags comes from:
./emulator -list-avds
Got this off an Android forum where I asked the same question. Hope this helps somebody else.
On a terminal emulator on the phone:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
Then on the cmd prompt, do the adb push
I think the safest way is remounting the /system as read-write, using:
mount -o remount,rw /system
and when done, remount it as read-only:
mount -o remount,ro /system
adb disable-verity
adb reboot
adb root
adb remount
This works for me, and is the simplest solution.
On my Samsung galaxy mini S5570 (after got root on cellphone):
Fist, as root, I ran:
systemctl start adb
as a normal user:
adb shell
su
Grant root permissions on touch screen
mount
list all mount points that we have and we can see, in my case, that /dev/stl12 was mounted on /system as ro (ready only), so we just need do:
mount -o rw,remount /dev/stl12 /system
Try the following on the command prompt:
>adb remount
>adb push framework-res_old.apk /system/framework-res.apk
Here is what worked for me. I was running an emulated Android 7.1.1 (Nougat) device.
On a terminal, I hit the following command. One thing to be noticed is the -writable-system flag
./emulator -writable-system -avd Nexus_6_API_25 -partition-size 280
On another tab
./adb shell
su
mount -o rw,remount -t ext4 /dev/block/vda /system
All the changes that you do on the /system contents will survive a restart.
I checked with emulator and following worked.
adb reboot
adb root && adb remount && adb push ~/Desktop/hosts /system/etc/hosts
As mentioned above as well, execute second step in single shot.
Open terminal emulator on the phone:
then
adb shell
after that daemon is started
su
mount -o rw,remount /mnt/sdcard
then the read only is converted into the read-Write.
Sometimes you get the error because the destination location in phone are not exist. For example, some android phone external storage location is /storage/emulated/legacy instead of /storage/emulated/0.
mount -o rw,remount /dev/stl12 /system
works for me
This worked for me
#Mount as ReadOnly
su -c "mount -o rw,remount /system"
# Change Permission for file
su -c "chmod 777 /system/build.prop"
#Edit the file to add the property
su -c "busybox vi /system/build.prop"
# Add now
service.adb.tcp.port=5678
# Reset old permissions
su -c "chmod 644 /system/build.prop"
# Mount as readonly again once done
su -c "mount -o ro,remount /system"
I found this article from google, and thought I'd add the steps necessary on a Sony Xperia Z (4.2.2).
The Sony has a watchdog process which detects when you've changed ro to rw on / and /system (these are the only ones I was trying to modify) and possibly others.
The following was what I ran to perform the changes I was trying to achieve. I pasted these into a window, because removing the execute bit from /sbin/ric needs to be done quickly in order to stop it restarting itself. (I tried stop ric; this doesn't work - although it worked on a previous version of android on the phone).
pkill -9 ric; mount -o rw,remount -t rootfs /
chmod 640 /sbin/ric
mount -o rw,remount /system
I modified the hosts file here, so this is the place you make the changes you need to the filesystem. To leave things the way we found them, do this:
mount -o ro,remount /system
chmod 750 /sbin/ric
mount -o ro,remount -t rootfs /
At which point ric should automatically restart. (It restarted for me automatically.)
Adding a little bit more to Jan Bergström's answer: Because Android is a Linux based system, and the path in Linux contains forward slashes(../), while using push command, use "/" to define destination path in the Android device.
For Example, the command goes: adb push C:\Users\admin\Desktop\1.JPG sdcard/pictures/
Notice that here, back slashes are used to define source path of the file to be pushed from windows PC and forward slashes are used to define destination path because Android is a Linux based system. You don't have to act as a root to use this command and also, it works perfectly fine on production devices.
Thanks, Sérgio, for "mount" command without parameters idea.
I'd need to made adb push into /data/data/com.my.app/lib for some test issue, and get "Read-only filesystem" message.
ls command shows me:
root#android:/ # ls -l /data/data/com.my.app/
drwxrwx--x u0_a98 u0_a98 2016-05-06 09:16 cache
drwxrwx--x u0_a98 u0_a98 2016-05-06 09:04 files
lrwxrwxrwx system system 2016-05-06 11:43 lib -> /mnt/asec/com.my.app-1/lib
So, it's understood, that "lib" directory is separated from other application directories.
Command
mount -o rw,remount /mnt/asec
didn't resolve "r/o fs" issue, it wants device parameter before directory parameter.
"df" command didn't help also, but shows that my /mnt/asec/com.my.app-1 directory is at the separate mount point.
Then I looks by mount and voila!
root#android:/ # mount
.........
/dev/block/dm-4 /mnt/asec/com.my.app-1 ext4 ro,dirsync,relatime 0 0
Next steps are already described upwards: remount to RW, push and remount back to RO.
it sames that must extract and repack initrc.img and edit init file with the code of mount /system
Copy files to the SD-card?
Well, I assume you like to copy data to the Sd-card from the developers computer? You might have rooted the devise and made the area you address available?) I had about the same problem to upload data files for my application(Android Studio 1.3.2 in Win7), but.
First the adb command-shell has to be found in th path:
PATH=%PATH%;C:\Users\XXXXX\AppData\Local\Android\sdk\platform-tools (the folder AppData is hidden, so you have to set the folder setup not hiding concealed files and folder to find it, Path works regardless)
You have to spell the folder path right or you get a read-only error message, most likely it must start with /sdcard or it is read only area. As soon as I did no problem pushing the file to the emulator.
So for instance the the adb command can look like this:
adb push C:\testdata\t.txt /sdcard/download/t.txt
If there's a failure in copying the read-only file you can try locating the original file in the root directory and modify it with a root text editor (preferably) RB text editor, it comes with ROM Toolbox app.
Try this in a Terminal Emulator as root:
restorecon -v -R /data/media
In my case I was using the command adb push ~/Desktop/file.txt ~/sdcard/
I changed it to ~/Desktop/file.txt /sdcard/ and then it worked.
Make sure to disconnect and reconnect the phone.
As chen-xing mentioned the simplest way is:
adb reboot
But for me I had to change my settings first:
Settings → Developer options → Root access
Make sure ADB has Root access:
I just only needed this:
su -c "mount -o rw,remount /system"