I am using LG Optimus G. ADT shows that my device is offline and version is unknown as seen on the screenshot. I am sharing my device manager look also. It is installed but i think it is not properly working. I don't want to ignore that matter it is probably going to face me later.
Thanks.
1. First ensure that the device is set up properly for USB debugging. Check that
- you have installed the proper driver for your phone on your PC.
- you have enabled USB debugging in Developer Settings.
2. After you have done the first step, when you connect your phone to the PC, a dialog will popup on your phone prompting you to accept the computer's RSA key. Accept it and the device will be shown as online in your IDE.
3. As a last resort, you can try re-starting your IDE. This will force adb to start properly.
Related
My Galaxy S9 device keeps appearing as "Offline" when I try to debug. It was working with the same application previously, and nothing changed. I receive this error: Session 'app': Error Installing APK
and
com.android.ddmlib.AdbCommandRejectedException: device offline
Error while Installing APK
Things I've tried:
I updated Android studio
All combinations of cleaning/rebuilding my project
Rebuilding APK
Double checking that I have the most up to date drive on my pc
Emulating didn't work either, but I was able to fix that by installing the Intel HAXM installer. Is there another set of developer tools I need to debug on hardware?
just today I've been through a similar situation with my MOTO G5: Everything was working just fine a few weeks ago and somehow it stopped working (maybe some windows update messed with something), device was always "offline" when using "adb devices". I've tried lots of different suggestions (reinstall drivers, disable/enable usb debug, adb kill/restart-server, change cable, change USB port, restart PC, restart phone, just revoke usb auth (see below) with no success.
Then I realized: what if I delete the RSA keys, and just then revoke the USB debug authorization? And finally, it worked!
Thanks to this website I've quickly found the location of the keys: Refresh Android Debug Bridge Keys.
On Windows, they are on folder C:\Users\{username}\.android\
After that, next time I plugged the phone and performed a "adb devices" finally, it showed "unauthorized" instead of "offline". Then on the phone screen there was a popup requesting authorization. Once authorized again, voila: everything working!
Since I didn't find this suggestion on any other forum before, I decided to post here my personal solution. Maybe I could help some other fellows with same issue.
Disable and re-enable adb debugging in your device's Developer options. Also, when you connect the device to your computer, you will get a prompt in the device asking if you want to trust the computer, Click ok.
try adb kill-server && adb start-server && adb devices
besides, this is no emulation, but debug on physical hardware.
one could also define this script as "external tool" in Android Studio.
This may be a late answer, but this is what worked for me.
When prompted on the computer to choose what happens when the device is plugged in, choose "Do Nothing" or simply ignore it.
On the Device, When asked "Allow Access to phone data?" tap AllOW.
This is what you should see when you swipe down from top.
In the options above, select charge this phone
wait for a few seconds and then again select either Transfer Files or Connect a MIDI Device
The device should show up in your list after some time.
If it doesn't, disable and then re-enable USB debugging from the developer options.
I know this question has been asked numerous times, but none of the threads have had an answer to solve my problem. It seems no matter what i try Eclipse just wont detect my phone, I have set it to debug mode in the settings, i've installed "Kies 3" on my laptop and it says i have the latest drivers already installed on my phone when i try to update it.
I've installed the google USB driver package from the sdk manager and have downloaded and installed the samsung driver from the samsung website. Windows recognizes the device and in the device manager under android phone it appears as "SAMSUNG android ADB Inerface".
Im running windows 7 and have even tried deleting all the mounted dive drivers from regedit as i seen suggested in another thread but still no joy! Really starting to get frustrated with this at this stage i've been trying for two days now to figure this out!
This is such a pain! I need to be able to debug on my phone too as i'm using features that the emulator can't handle (i.e. audio recording). I'm all out of ideas here so any help would really be appreciated!
Thanks
The method I followed to install my GT-I9300 drivers was this:
Download samsung drivers from this link:
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
Then just connect your phone and make sure you have a stable Internet connection: It will download required drivers automatically.
Also, make sure you have enabled Android developer options in your phone settings. Enable USB debugging in developer options.
I usually get it to work, when I switch the USB mode in my smartphone (e.g. MTP to PTP). This way, windows starts downloading more drivers.
1) Try disconnecting device from PC, revoke USB Debug authorization from settings menu, and then re-authorize the computer you are working on once you connect it again.
2) Check to see if you see the phone in DDMS perspective (left hand side) - if so, try clicking on it and it should work.
3) try removing all drivers (Google, Samsung etc.) + scan "leftover" registery entries using a reg cleaning program. Then install ONLY Kies Light version and try again.
4) It once worked for me - try changing the USB cable (preferably, to an original one)
Let us know if something worked!
1) enable USB debugging in your phone's settings.
2) ensure that you have the proper drivers installed.
3) open adb in command prompt and run "adb connect"
I just upgraded my phone to 4.2.2, but now i cannot use it in eclipse anymore.
I tried rebooting the device, reset my debug-settings but I cannot get it to work anymore.
I saw it is already a registered issue. There are some new security enhancements, so there should be a dialog (see here at bottom) but this dialog doesn't appear. I don't have several accounts on the phone, which is pointed out in the issue..
Anyone any suggestions?
EDIT: Look at accepted answer below, this should cover all cases. In my case, there were some packages missing, which weren't shown in the Android SDK Manager. I just found the Packages -> Reload in the Android SDK Manager... And I thought this happens automatically
You need three things in order to make sure this update goes smoothly:
Make sure your device is actually running 4.2.2 and the problem is not something else
Your SDK is updated to the latest tools. The adb binary in all but the latest version does not support the 4.2.2 security enhancements.
You are on the main account of your device in case of multiple user accounts.
Connect your Device to your computer and execute adb devices (make sure USB debugging is enabled). You should see something like this:
3tiu52839ry082j3 offline
Right about now, there should be a dialog on your device that looks something like:
Check the Always allow from this computer box if you want and click OK.
That's about it.
Some other things to check:
Make sure your USB cable isn't broken. Sometimes, the smaller cables break inside the main one, and your device may charge but have no data connection. Try with a different cable, or try accessing files on the device over USB (this will go fine if your cable is fine)
Make sure you're using the newest version of adb. Even after I updated my SDK tools, I couldn't get my device authorized when using adb. I eventually figured out that the Nvidia install of the NDK and SDK tools had updated my PATH variable to use the adb from that install, which wasn't the latest update. By using the adb in my newly updated install, I was able to get it all working.
For me it was solved by changing Nexus 7 tablet to "Camera(PTP)" mode.
Check out this blog post on how to do it.
After USB connection of Nexus 7 and confirming digest on Nexus 7, also connecting through TCP/IP with ADB worked.
Wierdly, unchecking and rechecking the "Allow USB Debugging" option popped me the window and selecting "ok" solved my problem.
If none of the solutions worked for you then Reset ADB.
Go to Devices ---Click the right most down arrow----Select Reset ADB from the list.
I had tried everything suggested here and suggested in every log/blog that I could find in google, but still no go. The USB cable is known to be good. ADB is version 1.0.31 (as shown with , USB Debugging is enabled in the Nexus 7 tablet, the SDK was updated to the very latest tools as available on 1-mar-2013 for 4.2.2/API 17. I had tried both Media and Camera modes for USB, rebooted windows, rebooted device over and over again, re-installed latest google USB driver, etc. etc. but ADB Devices still showed nothing.
I hard reset the Nexus 7 tablet thinking that maybe the screen to allow usb debugging had appeared but got hit with cancel. But that didn't work either.
What finally worked was:
going into windows control panel | Device Manager,
selecting NEXUS under Portable devices,
then in the Driver tab clicking on update and manually selecting the Google USB driver (the check feature said it was up to date). Previously, the date shown was in 2006, afterwards a date in 2012 (but more on this in a moment).
That didn't fix anything though.
So then I switched USB from MEDIA device to Camera device - THEN it wanted to install driver software, so I let it do that. Afterwards, I noticed that the driver for the Nexus was back with the 2006 version, BUT then ADB DEVICES FINALLY SHOWED OFFLINE!!!! HALLELUJAH AND the Nexus was displaying the Dialog to allow USB debugging, and it now all works.
What I am not sure of is what step actually solved the problem. I don't think it was necessary to hard reset the Tablet, but the fiddling with the device driver wasn't a very convincing solution either - I don't think the driver was corrupt - but maybe it had to be changed to get the right driver associated with the tablet when connected as a Camera Device. In any event, it is necessary to connect the tablet as a Camera device for ADB to work...
Restarting device or enabling USB debugging did not solve my problem.
However I changed USB PC Connection to "Camera(PTP)" mode and adb devices showed the device id of the phone.
After reading a lot post talking about this particular problem, I actually solved it by resetting user permissions on files (that were owned by root): ${HOME}/.android/adbkey and ${HOME}/.android/adbkey.pub
Go to Device Manager and uninstall your device and remove from USB
HAve you CMD opend and make sure you are at least in ADB Help.
Connect device to USB and continue with steps provided by Raghav Sood - few answers ahead of me.
Worked for me just fine
I tried with this custom build and it works for me. Now I can see my logcat in Eclipse again.
https://github.com/khaledev/ADT/releases
Download the zip file then in Eclipse menu Help > Install New Software... > Add > Archive... Just pick the downloaded zip and do the rest of the install process.
I am using HCL ME U1 for testing my android application. But when i am trying to run my app on my device, it show unknown device and failed to install on device.
I follow this question with accepted answer but didn't find any device in device manager.
First time, when i connect device to my computer it show "Device driver successfully installed".
I am using windows 7 32 bit OS.
I didn't find any android device in device manager.
When i use cmd to find out device then it show in list.
I also enable USB Debugging and Unknown source in my hcl tablet.
Please give me some hint or reference.
Thanks in Advance.
Instead of restarting the phone, go to task manager(windows) and kill the adb.exe process. After 10-15 secs, it will restart again by itself. It should detect your device then.
Once I encountered this issue and none of the matters could solve my question except a simple trick. I turned off the phone, ejected the SD card, cleaned it with sth and then put it back into the phone.
After turning on the phone, everything was alright. You have other options too:
Connecting your phone to pc while phone is connected to internet (to update its usb drive)
Updating your ADB driver from device manager (while phone is connected to pc)
Some USB cables don't have debug ability. Be sure of using a proper one.
I recently solved a similar problem in Ubuntu by updating my Android SDK. A year ago, I also remember I had great difficulty getting a different phone to connect to Windows. I remember that, despite receiving the "Device driver successfully installed" message, I had to manually install the usb driver from the SDK Tools Manager.
You might also try "adb devices" to see if your device shows up there. I would expect it to be in the Windows device manager of adb can see it. You mentioned there were no Android devices in Device Manager: check for other unkown devices it might show up as. I believe mine showed up as USB Mass Storage before updating the drivers. An alternate guide to doing so can be found here.
I am trying to enable USB Debugging on Android so that I don't need to use the emulator.
I did what all the posts all around the web say to do: I went to settings -> applications -> Developer -> USB debugging
It still does not turn on the notification sign that USB Debugging is enabled, and Eclipse does not recognize it, and uses the regular emulator.
Does anyone have any idea what is wrong?
You haven't specified what device you are using or what operating system you are using, so that could be helpful.
A few things to keep in mind:
1 Don't mount as USB storage.
2 You also need to make sure to install the drivers for your phone so that the Android Debug Bridge (ADB) can properly communicate. After these are installed, try the command "adb devices" and you should see an item in your list of devices.
Update based on your comment: You can download Kies from Samsung, which include the drivers (as well as other things): http://www.samsung.com/us/kies/
Or you can find unofficial driver-only packages, such as: http://forum.xda-developers.com/showthread.php?t=961956
I think you'll need the OEM USB dirvers.
Read this:
OEM USB Drivers
My experience with windows has been that you might need to un-install the USB drivers under device manager. Then disconnect the device (restart might be required). After plugging the device back in make sure you use the manufactures drivers if available
you have installed your device driver rite?then right click on your app name->run as->run configurations->target->select manual->apply.after that click on debug button then it will ask you to select the device.
If everything else is tested, try with another USB cable.
On Android 4.2 and higher, the Developer options screen is hidden by default. To make it visible, go to Settings > About phone and tap Build number seven times. Return to the previous screen to find Developer options at the bottom.
Fruthermore on some devices you will be asked to accept an RSA key, which allows debugging through your computer. This ensures that other adb commands cannot be executed unless you're able to unlock your device.
Detailed information can be found here:
http://developer.android.com/tools/help/adb.html It is the overview about adb commands (which is used to send data to your device) and it starts with the steps how to bring your phone to debug-mode.
I wish to add to Danation's answer with the following.
If you have installed KIES, and you've tried following instructions a couple of times (for the android SDK package) without success, here's what worked for me:
As a precaution, disconnect the device, and press 'Revoke USB Debugging authorizations'.
Now, go to kies, and reinstall the device driver as seen on the image below.
Connect the device.
For me, it was a routine, it usually works when installing kies, but I was stuck on this today for a little while, and I hope i can help others with my solution as well..