I am trying to setup android studio in my computer and almost everything's done but the last one and that is setting up the emulator. When I try to start it by clicking on AVD Manager I get this error.
Cannot launch AVD in emulator.
Output:
emulator: ERROR: x86 emulation currently requires hardware acceleration!
Please ensure Intel HAXM is properly installed and usable.
CPU acceleration status: HAX kernel module is not installed!
I have tried to solve this issue by doing the following:
Going into the directory ........sdk\extras\intel\Hardware_Accelerated_Execution_Manager\ and then running the exe file "intelhaxm-android.exe" to install manually. However, it did not work as well and gave the error saying that VT not supported.
To solve that problem I checked that in BIOS and found out it was already enabled.
Then, I searched more about it and found out that the anti virus may be causing it. So, about that, firstly, I do not have any Anti-virus installed yet and secondly I also deactivated Windows Firewall but still getting the error.
And,,,,,,,,,,,,,,,,,,,,,,this question is not a duplicate of this question
Emulator: ERROR: x86 emulation currently requires hardware acceleration
or any other one on stackoverflow.
I recommend you use Genymotion instead of HAXM. It's faster and saves you a lot of time.
https://www.genymotion.com
I had the same issues with HAXM, I just found a solution. In the BIOS, I had "VT -d" enabled, I juste disabled it and everything worked well.
Hoping I helped you.
(look like VT -d is disable-ing VTx).
But Genymotion is faster than Android Studio emulator by the way, and comes with more options.
Do you have an old computer? I use Andriod Studio but I had the same problem trying to enable HAXM on my PC in order to use the emulator. My PC is several years old and runs Windows7.
I tried an alternate method but it was so slow that I have decided I needed to replace my PC.
Related
Intel HAXM refuses to launch with my emulator. I think I've tried everything for the past two days and I can't figure it out.
These are the errors in Android Studio.
Emulator: emulator: ERROR: x86_64 emulation currently requires
hardware acceleration!
Emulator: CPU acceleration status: Unable to open HAXM device:
ERROR_FILE_NOT_FOUND
Emulator: Process finished with exit code 1
Here's the list of things I've done to fix it:
Enabled virtualization in BIOS, set Hyper V off, made sure antivirus isn't a problem, my processor supports virtualizations and everything needed for haxm to work, tried different emulators, different apis - didn't work.
I tried installing different haxm versions, it didn't solve it either.
Installed the latest version, 7.3, didn't work.
processor, error code,already installed haxm
UPDATE:
07/09/2018
Issue is still not fixed but i found a smart workaround it. I'm using NOX emulator to debug the app. Nox loads the app within seconds. Just figured i'd post this if anyone is stuck here.
I've been struggling with this for the past while and can't find any solutions. HAXM seems to be unable to detect that I have Intel Virtualization Technology enabled in my BIOS.
This issue only arose today after updating android studio and was working perfectly before. I've looked over the Intel and stack overflow forums but it has made no difference, Hyper-V is disabled on my PC and my antivirus is the free avg so I am unsure as to what may be causing it.
I've tried installing it through both the SDK manager in Android Studio and manually but it doesn't change anything.
Figured it out!
All you need to do is uninstall it via the control panel, delete any files that may be there from Android Studio and then install it from Intel's android resources
I'm getting an error while running my AVD on Android Studio. Below screenshot is the error.
http://i.gyazo.com/cc1d9497b3f504196fe4f78fc6a2932e.png
After doing some Googling, I understand that the HAXM installer needs to be installed from the SDK Manager. I did that (screenshot below)
http://i.gyazo.com/060b1108091d497da3e9e312ec7aedcc.png
Doing some further research, it seems like I need to execute an .exe file from the Android Studio folder. However, the SDK folder seems to be missing for me.
I'm stuck in a loop here, I'm not sure what to do. Is anyone able to assist with this? I enable virtualization in my BIOS but it didn't do the trick. My processor is also supported according to the intel website. Thank you.
Use Genymotion as your emulator. Fast and reliable. The solution below is from a possible duplicate question to yours.
After you download it and make sure you run the setup located in: {SDK_FOLDER}\extras\intel\Hardware_Accelerated_Execution_Manager\intelhaxm.exe
Note: in Android Studio, the command "intelhaxm.exe" has been changed to "intelhaxm-android.exe"
If you get the error "VT not supported" during the installation disable Hyper-V on windows features. You can execute this command dism.exe /Online /Disable-Feature:Microsoft-Hyper-V. You will also need "Virtualization Technology" to be enabled on your BIOS
If that doesn't work try the ARM virtual device instead because your PC might not be intel HAXM compatible(mine wasn't). There might be some other options too for other types of virtual devices you can use. I recommend you try the ARM one if it doesn't work.
I'm a newbie to Android Application development, just started off by downloading Android Studio along with JDK-7 and also installed Intel x86 Emulator Accelerator(HAXM) through SDK manager.
Now when I try to launch Emulator, I get this error:
emulator: ERROR: x86 emulation currently requires hardware acceleration!
Please ensure Intel HAXM is properly installed and usable.
CPU acceleration status: HAX kernel module is not installed!
I tried these steps from a similar post, but when I try to run the setup located at: {SDK_FOLDER}\extras\intel\Hardware_Accelerated_Execution_Manager\intelhaxm.exe
I get this exception:
and when I checked my processor config, I found that it doesn't support Virtualization technology,
Now my question is, is it possible to use a pc without Virtualization technology feature for Android App Development(Including Emulator)?
As the name implies, it is an Emulator Accelerator. You can still use the Emulator, its just going to be a bit slower running without HAXM.
In my experience, it is OK to use the normal emulator for infrequent debugging but it is too slow, even with HAXM, for serious development, which should be carried out on an actual device.
If you have to use an emulator, I'd go with GenyMotion.
San', you could try using a super fast and popular emulator known as "GenyMotion". It is for free :). Also, I ran into the VT error myself before when I first installed Android Studio on my new laptop and I was able to successfully resolve it by configuring my BIOS options a bit. It's easy, I can point you to the direction that I took if you want me to.
I have successfully installed Android Studio from their official homepage.
But the problem is I can't strat my emulator. Once I run the program, it shows the following error in my command window.
"C:\Users\Jabir Al Fatah\AppData\Local\Android\sdk1\tools\emulator.exe" -avd Nexus_5_API_21 -netspeed full -netdelay none
emulator: ERROR: x86 emulation currently requires hardware acceleration!
Please ensure Intel HAXM is properly installed and usable.
CPU acceleration status: HAX kernel module is not installed!
Now, I have uninstalled the Studio at least 10 times and installed them again. I have searched online about all the possible solution. I have HAXM installer installed properly in my sdk.
I have enabled the virtualization in BIOS. But none of those really help.
I wanted to exucute the intelhaxm.exe file. But the problem is I don't find any sdk folder in my drive. I can see the specified derictory for sdk while installing the studio, but in reality that folder is never created and never exist in my drive.
Please help me to find a solution.
Windows 8. Android Studio.
Make sure if virtualization is enable : go through those steps provided below.
Goto setting -> change pc settings-> general->then see on right side
by scrolling the frame down-> you will see under advance start up
restart now button press it->then choose an option window will
open->choose troubleshoot->under troubleshoot choose Advance
option->then under Advance options choose UEFI Firmware option->then
press restart->press f10 for BIOS->see the menubar where you will
find system configuration menu inside it you will see the
virtualization Technology "enable" it ->now go for exit saving
changes in exit on menu bar..
C:\Users\username\AppData\Local\Android\sdk\extras\intel\Hardware_Accelerated_Execution_Manager\intelhaxm-android.exe
(in username : please enter valid user name)
install it and restart your Android Studio.
if you make few changes on above process it is same for win 7 and also same for eclipse have fun!!
I had the same problem. You might wanna read this post:
Error in launching AVD with AMD processor
In particular, after installing HAXM through the SDK manager, which in itself didn't fix the problem, try to run the intelhaxm-android.exe. This showed that I had some hardware virtualization problems (like the error mentioned in the other post).
I'm switching to the Genymotion thingy.
Cheers, B.
Eventually, I found a different solution, as the Genymotion wasn't the right thing for me.
In the AVD manager, I changed the processor type of the AVD to ARM and this doesn't need the HAXM thing at all. This surely doesn't make stuff very fast, but it got me a working emulator. Once it's running, it's not that bad.
Hope this helps.
Cheers!