Develop Reference

Can I permenatly brick a device ny shorting stuff to ground for a split second?

So I have this device I was trying to get the firmware off of (its an xfinity flex) and I was able to get UART messages off the board but not a shell, so I was trying to interupt the bootloader by shorting the nand device pins to ground but it was a BGA so I soldered a wire to ground and I just began to poke things and the CPU would always just restart and I would see the same messages on the UART over and over so I began just poking random stuff on the bottom of the board to try and interupt it and I either messed something up permanetly or fried something but its weird the device still works (sortof) I mean I see the "Welcome" screen on the TV and then it says "Connecting to Wifi" on the TV but when I try to use the remore nothing moves on the TV and the UART messages are permantly different now (see below)
before poking around I would see this message on UART
[A1][M1][A][M][B1][B]
PSCI: Init...
[P1]
PSCI: v0.2
AVS: park check
***[ Technicolor Stage1 v3.45.21.121 ]***
DevProfile: xi6brcm - 1.45.0.7 [UCX6020COM]
SignCert: [CMS CVC Xi6 Stage2 (updatable) 01, r3] BL=3.45 OTP=16
Loader: S2X1-3.45.21.134
>>> Stage1 exit <<<
____________________________
***[ Technicolor Stage2 v3.45.21.134 ]***
DevProfile: xi6brcm - 1.45.0.7 [UCX6020COM]
CmsTrack: RW VFY #1
CmsSign: PROD NR=4 BL=3.45 CC=0 MC=0x0001000E SOCID=0x0000010D0397DCD9
SOC-ID: 0x0000000000000000 [JL]
Device ID: MBSN="000000000000000" CSN="000000000000" TCOM="0000000"
HardwareID: HWID=0x00000000 PT=0x0000 PV=0x0000 PR=0x0000 OUI=0x000000
BankerBlok: FACT#613: xi6brcm - 1.45.0.7
SignCert: [CMS CVC Xi6 Artwork 01] BL=3.45 OTP=16
Banker Table: (#613) BootOrder: MAIN PDRI BDRI
Bank State Full Version Message
------- ------------ ---- ------------- ------------------------------
BDRI-0: Confirmed 30% 203.45.1.62 dpstore: TX061AEI_BDRI_203.45.1.62.bin
PDRI-0: Confirmed 30% 213.45.1.68 xi6tool: TX061AEI_PDRI_213.45.1.68- signed.bin [2021-06-23 07:24:08]
MAIN-0: TrialBoot#7 25% 1.0.0.1 xi6tool: TX061AEI_4.10p8s4_PROD_sey-signed.bin [2021-08-26 04:34:16]
MAIN-1: Confirmed#10 24% 1.0.0.1 xi6tool: download.bin [2021-08-26 04:29:32]
SaErr=1046
SaErr=1046
Banker: Boot MAIN-0 LaunchKit
SignCert: [CMS CVC Xi6 PCI 01, r3] BL=3.45 TRK=4 SVN=0 OTP=16
SignCert: [CMS CVC Xi6 PCI 01, r3] BL=3.45 TRK=4 SVN=0 OTP=16
SignCert: [CMS CVC Xi6 PCI 01, r3] BL=3.45 TRK=4 SVN=0 OTP=16
Loader: KRNL-1.0.0.1
>>> Stage2 exit <<<
but now I see this permenatly
[A1][M1][A][M][B1][B]
PSCI: Init...
[P1]
PSCI: v0.2
AVS: park check
***[ Technicolor Stage1 v3.45.21.137 ]***
DevProfile: xi6brcm - 1.45.0.7 [UCX6020COM]
SignCert: [CMS CVC Xi6 Stage2 (updatable) 01, r3] BL=3.45 OTP=16
Loader: S2X1-3.45.21.137
>>> Stage1 exit <<<
____________________________
***[ Technicolor Stage2 v3.45.21.137 ]***
DevProfile: xi6brcm - 1.45.0.7 [UCX6020COM]
CmsTrack: RW VFY #1
CmsSign: PROD NR=4 BL=3.45 CC=0 MC=0x0001000E SOCID=0x0000010D03497998
SOC-ID: 0x0000010D03497998 [JL]
Device ID: MBSN="192876610001841" CSN="TM01131U4865" TCOM="3783814"
HardwareID: HWID=0x00000DAD PT=0x003D PV=0x0001 PR=0x000B OUI=0x28BE9B
BankerBlok: FACT#74: xi6brcm - 1.45.0.7
SignCert: [CMS CVC Xi6 Artwork 01] BL=3.45 OTP=16
Banker Table: (#74) BootOrder: MAIN PDRI BDRI
Bank State Full Version Message
------- ------------ ---- ------------- ------------------------------
BDRI-0: Confirmed 30% 203.45.1.62 dpstore: TX061AEI_BDRI_203.45.1.62.bin
PDRI-0: TrialBoot#8 30% 213.45.1.68 xi6tool: TX061AEI_PDRI_213.45.1.68-sign ed.bin [2023-02-02 06:08:00]
MAIN-0: FailUnstable xi6tool: TX061AEI_5.10p7s1_PROD_sey-sig ned.bin [2023-02-02 06:01:15]
MAIN-1: FailUnstable xi6tool: TX061AEI_5.10p7s1_PROD_sey-sig ned.bin [2023-02-02 06:01:15]
SaErr=1046
SaErr=1046
Banker: Boot MAIN-0 SaErr=4667
Banker: Boot MAIN-1 SaErr=4667
Banker: Boot PDRI-0 LaunchKit
SignCert: [CMS CVC Xi6 PDRI 01, r2] BL=3.45 TRK=3 SVN=0 OTP=16
SignCert: [CMS CVC Xi6 PDRI 01, r2] BL=3.45 TRK=3 SVN=0 OTP=16
SignCert: [CMS CVC Xi6 PDRI 01, r2] BL=3.45 TRK=3 SVN=0 OTP=16
Loader: KRNL-213.45.1.68
>>> Stage2 exit <<<
____________________________
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.1.20-1.12 (build#runner-2772cd7b-project-4032-con current-0) (gcc version 4.8.5 (Broadcom stbgcc-4.8-1.6) ) #4 SMP Mon May 3 18:47 :22 UTC 2021
[ 0.000000] CPU: ARMv7 Processor [420f1000] revision 0 (ARMv7), cr=30c5383d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
[ 0.000000] Machine model: xi6brcm
[ 0.000000] moving dtb from 0x0000000014600000 to 0x00000000009bef58
[ 0.000000] bmem: Reserved 1692 MiB at 0x0000000010000000
[ 0.000000] cma: Reserved 16 MiB at 0x000000000ec00000
[ 0.000000] Forcing write-allocate cache policy for SMP
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] PERCPU: Embedded 12 pages/cpu #cfd92000 s17024 r8192 d23936 u4915 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 515584
[ 0.000000] Kernel command line: root=/dev/ram0 ramdisk_size=37380096
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 183632K/2064384K available (6859K kernel code, 303K rwdat a, 2188K rodata, 340K init, 243K bss, 1864368K reserved, 16384K cma-reserved, 11 88K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc08de408 (9050 kB)
[ 0.000000] .init : 0xc08df000 - 0xc0934000 ( 340 kB)
[ 0.000000] .data : 0xc0934000 - 0xc097fec0 ( 304 kB)
[ 0.000000] .bss : 0xc0982000 - 0xc09bef58 ( 244 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0802000, parent irq: 91)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0808000, parent irq: 63)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080aa00, parent irq: 64)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080c640, parent irq: 93)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080e200, parent irq: 57)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0810600, parent irq: 97)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0812c00, parent irq: 98)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0814640, parent irq: 95)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0816c40, parent irq: 96)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0818000, parent irq: 100)
[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (phys).
[ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
[ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 43980 46511093ns
[ 0.000009] Switching to timer-based delay loop, resolution 37ns
[ 0.000376] Console: colour dummy device 80x30
[ 0.000394] Calibrating delay loop (skipped), value calculated using timer fr equency.. 54.00 BogoMIPS (lpj=27000)
[ 0.000401] pid_max: default: 32768 minimum: 301
[ 0.000487] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000491] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000838] CPU: Testing write buffer coherency: ok
[ 0.001037] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001070] Setting up static identity map for 0x8480 - 0x84d8
[ 0.002971] MCP: Enabling write pairing
[ 0.004430] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.005731] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.007024] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.007048] Brought up 4 CPUs
[ 0.007057] SMP: Total of 4 processors activated (216.00 BogoMIPS).
[ 0.007061] CPU: All CPU(s) started in HYP mode.
[ 0.007064] CPU: Virtualization extensions available.
[ 0.007362] devtmpfs: initialized
[ 0.015046] VFP support v0.3: implementor 42 architecture 3 part 10 variant 0 rev 0
[ 0.015198] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max _idle_ns: 1911260446275000 ns
[ 0.016165] NET: Registered protocol family 16
[ 0.016662] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.022204] cpuidle: using governor ladder
[ 0.028218] cpuidle: using governor menu
[ 0.033277] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.033282] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.033534] Broadcom Brahma-B15 readahead cache at: 0xd08ca078
[ 0.044039] brcmstb-gpio f040a500.gpio: Registered 4 banks (GPIO(s): 0-127)
[ 0.044190] brcmstb-gpio f0419c80.gpio: Registered 2 banks (GPIO(s): 128-191)
[ 0.245926] SCSI subsystem initialized
[ 0.246132] usbcore: registered new interface driver usbfs
[ 0.246164] usbcore: registered new interface driver hub
[ 0.246189] usbcore: registered new device driver usb
[ 0.246256] Linux video capture interface: v2.00
[ 0.246280] pps_core: LinuxPPS API ver. 1 registered
[ 0.246284] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti#linux.it>
[ 0.246298] PTP clock support registered
[ 0.246558] Advanced Linux Sound Architecture Driver Initialized.
[ 0.246927] Switched to clocksource arch_sys_counter
[ 0.251000] thermal thermal_zone0: failed to read out thermal zone (-22)
[ 0.251086] NET: Registered protocol family 2
[ 0.251392] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.251408] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.251429] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.251457] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.251468] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.251558] NET: Registered protocol family 1
[ 0.251675] RPC: Registered named UNIX socket transport module.
[ 0.251679] RPC: Registered udp transport module.
[ 0.251681] RPC: Registered tcp transport module.
[ 0.251683] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.251776] Trying to unpack rootfs image as initramfs...
[ 0.251855] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
[ 0.303229] Freeing initrd memory: 36504K (ca000000 - cc3a6000)
[ 0.303454] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
[ 0.303485] hw perfevents: enabled with armv7_cortex_a15_on_a53 PMU driver, 7 counters available
[ 0.304343] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.305094] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.305217] NFS: Registering the id_resolver key type
[ 0.305235] Key type id_resolver registered
[ 0.305238] Key type id_legacy registered
[ 0.305247] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.305270] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.305328] fuse init (API version 7.23)
[ 0.305743] bounce: pool size: 64 pages
[ 0.305765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 51)
[ 0.305772] io scheduler noop registered
[ 0.305778] io scheduler deadline registered
[ 0.305786] io scheduler cfq registered (default)
[ 0.305983] brcm-gisb-arb f0400000.gisb-arb: registered mem: d0952000, irqs: 261, 262
[ 0.306491] brcmstb-sata-phy f0b10100.sata_phy: registered 1 port(s)
[ 0.307072] brcm-pci f0460000.pcie: fixing incorrect interrupt-map in DT node
[ 0.407363] brcm-pci f0460000.pcie: link down
[ 0.408669] brcmstb_memc f1102000.memc-ddr: registered
[ 0.408934] brcm-waketimer f041a080.waketimer: rtc core: registered brcmstb-w aketmr as rtc0
[ 0.408942] brcm-waketimer f041a080.waketimer: registered, with irq 264
[ 0.432439] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.433284] bcm7271-uart f040c000.serial: BAUD MUX clock found
[ 0.433557] console [ttyS0] disabled
[ 0.433581] f040c000.serial: ttyS0 at MMIO 0xf040c000 (irq = 102, base_baud = 5062500) is a 16550A
[ 1.205766] console [ttyS0] enabled
[ 1.209412] bcm7271-uart f040d000.serial: BAUD MUX clock found
[ 1.215484] f040d000.serial: ttyS1 at MMIO 0xf040d000 (irq = 103, base_baud = 5062500) is a 16550A
[ 1.224585] bcm7271-uart f040e000.serial: BAUD MUX clock found
[ 1.230570] f040e000.serial: ttyS2 at MMIO 0xf040e000 (irq = 104, base_baud = 5062500) is a 16550A
[ 1.240195] [drm] Initialized drm 1.1.0 20060810
[ 1.248544] brd: module loaded
[ 1.253931] loop: module loaded
[ 1.257717] brcm-ahci f0b12000.sata: controller can do ALPM, turning on CAP_A LPM
[ 1.265129] brcm-ahci f0b12000.sata: masking port_map 0x1 -> 0x1
[ 1.271162] brcm-ahci f0b12000.sata: SSS flag set, parallel bus scan disabled
[ 1.288943] brcm-ahci f0b12000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0 x1 impl platform mode
[ 1.297918] brcm-ahci f0b12000.sata: flags: 64bit ncq sntf stag pm clo pmp sl um part
[ 1.306317] scsi host0: brcm-ahci
[ 1.309767] ata1: SATA max UDMA/133 mmio [mem 0xf0b12000-0xf0b1299b] port 0x1 00 irq 89
[ 1.317700] brcm-ahci f0b12000.sata: Broadcom AHCI SATA3 registered
[ 1.324934] libphy: Fixed MDIO Bus: probed
[ 1.329450] bcmgenet f0480000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.347928] libphy: bcmgenet MII bus: probed
[ 1.372070] Broadcom BCM7268 f0480000.etherne:01: failed to request GPHY cloc k
[ 1.379897] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.385740] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 1.391707] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet dri ver
[ 1.399152] usbcore: registered new interface driver pegasus
[ 1.404850] usbcore: registered new interface driver asix
[ 1.410284] usbcore: registered new interface driver ax88179_178a
[ 1.416412] usbcore: registered new interface driver cdc_ether
[ 1.422295] usbcore: registered new interface driver cdc_ncm
[ 1.422941] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.433479] xhci-brcm: xHCI BRCM driver
[ 1.454359] xhci-brcm f0b01000.xhci_v2: xHCI Host Controller
[ 1.460104] xhci-brcm f0b01000.xhci_v2: new USB bus registered, assigned bus number 1
[ 1.468116] xhci-brcm f0b01000.xhci_v2: hcc params 0x0250f17d hci version 0x1 00 quirks 0x00010090
[ 1.477014] xhci-brcm f0b01000.xhci_v2: irq 124, io mem 0xf0b01000
[ 1.483530] hub 1-0:1.0: USB hub found
[ 1.487302] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 1.494553] xhci-brcm f0b01000.xhci_v2: xHCI Host Controller
[ 1.500293] xhci-brcm f0b01000.xhci_v2: new USB bus registered, assigned bus number 2
[ 1.508165] usb usb2: We don't know the algorithms for LPM for this host, dis abling LPM.
[ 1.516541] hub 2-0:1.0: USB hub found
[ 1.520314] hub 2-0:1.0: 2 ports detected
[ 1.524612] ehci-brcm: EHCI BRCM driver
[ 1.528519] ehci-brcm f0b00300.ehci_v2: EHCI Host Controller
[ 1.534262] ehci-brcm f0b00300.ehci_v2: new USB bus registered, assigned bus number 3
[ 1.552180] ehci-brcm f0b00300.ehci_v2: irq 122, io mem 0xf0b00300
[ 1.563935] ehci-brcm f0b00300.ehci_v2: USB 2.0 started, EHCI 1.00
[ 1.570419] hub 3-0:1.0: USB hub found
[ 1.574190] hub 3-0:1.0: 1 port detected
[ 1.578300] ehci-brcm f0b00500.ehci_v2: EHCI Host Controller
[ 1.584044] ehci-brcm f0b00500.ehci_v2: new USB bus registered, assigned bus number 4
[ 1.601949] ehci-brcm f0b00500.ehci_v2: irq 126, io mem 0xf0b00500
[ 1.613935] ehci-brcm f0b00500.ehci_v2: USB 2.0 started, EHCI 1.00
[ 1.620427] hub 4-0:1.0: USB hub found
[ 1.624248] hub 4-0:1.0: 1 port detected
[ 1.628398] ohci-brcm: OHCI BRCM driver
[ 1.632297] ohci-brcm f0b00400.ohci_v2: BRCM OHCI controller
[ 1.638040] ohci-brcm f0b00400.ohci_v2: new USB bus registered, assigned bus number 5
[ 1.645919] ohci-brcm f0b00400.ohci_v2: irq 123, io mem 0xf0b00400
[ 1.707276] hub 5-0:1.0: USB hub found
[ 1.711048] hub 5-0:1.0: 1 port detected
[ 1.715132] ohci-brcm f0b00600.ohci_v2: BRCM OHCI controller
[ 1.720874] ohci-brcm f0b00600.ohci_v2: new USB bus registered, assigned bus number 6
[ 1.729169] ohci-brcm f0b00600.ohci_v2: irq 127, io mem 0xf0b00600
[ 1.790209] hub 6-0:1.0: USB hub found
[ 1.793979] hub 6-0:1.0: 1 port detected
[ 1.798112] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.804658] ehci-pci: EHCI PCI platform driver
[ 1.809149] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.815350] ohci-pci: OHCI PCI platform driver
[ 1.819938] usbcore: registered new interface driver usb-storage
[ 1.826290] mousedev: PS/2 mouse device common for all mice
[ 1.832070] i2c /dev entries driver
[ 1.835682] gspca_main: v2.14.0 registered
[ 1.840015] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor d river
[ 1.950867] brcmstb-avs-cpufreq f04c4000.avs-cpu-data-mem: registered
[ 1.957528] sdhci: Secure Digital Host Controller Interface driver
[ 1.963720] sdhci: Copyright(c) Pierre Ossman
[ 1.968089] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.974931] sdhci-brcmstb f0200200.sdhci: No vmmc regulator found
[ 1.981036] sdhci-brcmstb f0200200.sdhci: No vqmmc regulator found
[ 2.016936] mmc0: SDHCI controller on f0200200.sdhci [f0200200.sdhci] using A DMA
[ 2.024460] Hello world, from the lp5560 driver
[ 2.029274] usbcore: registered new interface driver usbhid
[ 2.034857] usbhid: USB HID core driver
[ 2.038996] Netfilter messages via NETLINK v0.30.
[ 2.043731] nf_conntrack version 0.5.0 (3695 buckets, 14780 max)
[ 2.050005] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.056263] NET: Registered protocol family 10
[ 2.061057] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.066526] sit: IPv6 over IPv4 tunneling driver
[ 2.071458] NET: Registered protocol family 17
[ 2.075933] bridge: automatic filtering via arp/ip/ip6tables has been depreca ted. Update your scripts to load br_netfilter if you need this.
[ 2.088719] Key type dns_resolver registered
[ 2.093055] Registering SWP/SWPB emulation handler
[ 2.099428] brcm-waketimer f041a080.waketimer: setting system clock to 1970-0 1-01 00:00:17 UTC (17)
[ 2.110469] vreg-wlan_reg_on-pwr: disabling
[ 2.111517] mmc0: MAN_BKOPS_EN bit is not set
[ 2.119085] ALSA device list:
[ 2.122060] No soundcards found.
[ 2.125813] RAMDISK: squashfs filesystem found at block 0
[ 2.126146] mmc0: new high speed MMC card at address 0001
[ 2.126323] mmcblk0: mmc0:0001 DG4016 5.98 GiB
[ 2.126365] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB
[ 2.126405] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB
[ 2.126442] mmcblk0gp0: mmc0:0001 DG4016 partition 4 1.00 GiB
[ 2.126482] mmcblk0gp1: mmc0:0001 DG4016 partition 5 40.0 MiB
[ 2.126519] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB
[ 2.133198] mmcblk0: p1 p2 p3 p4
[ 2.135257] mmcblk0gp1: p1
[ 2.176487] RAMDISK: Loading 36502KiB [1 disk] into ram disk... done.
[ 2.797138] VFS: Mounted root (squashfs filesystem) readonly on device 1:0.
[ 2.804308] devtmpfs: mounted
[ 2.807430] Freeing unused kernel memory: 340K (c08df000 - c0934000)
starting pid 1281, tty '': '/etc/init.d/rcS'
Mounting virtual filesystems
Configuring eth0 interface
[ 2.944934] f0480000.etherne:01: Broadcom BCM7268 PHY revision: 0x01
[ 2.952105] bcmgenet f0480000.ethernet: configuring instance for internal PHY
[ 2.959307] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Configuring lo interface
Configuring sit0 interface
Starting network services
********************************************************************************
* |||||| Cisco Common Disaster Recovery Agent (Common DRA) |||||| *
*** *** *
* * *
********************************************************************************
Script: /etc/init.d/S26DRA-platform-init
[ 4.956000] bcmgenet f0480000.ethernet eth0: Link is Down
Done
HW ID: 0013173
Checking, mounting /mnt/crit_nvs
/dev/mmcblk0gp1p1: recovering journal
/dev/mmcblk0gp1p1: clean, 560/10000 files, 10848/39936 blocks
[ 6.128152] EXT4-fs (mmcblk0gp1p1): mounted filesystem with ordered data mode . Opts: (null)
WARNING: Partition version from unit is newer than script (3 > 1)
No partition changes will be made
Checking, mounting /opt
/dev/mmcblk0p2: recovering journal
/dev/mmcblk0p2: clean, 1137/17928 files, 42892/71680 blocks
[ 6.310967] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null)
/usr/bin/tch_nvram.sh: Success
rm: can't remove '/tmp/draDisplayMsgQueue': No such file or directory
Missing /tmp/draDisplayMsgQueue, Creating...
Unknown HZ value! (94) Assume 100.
1373 ? S 0:00 grep /usr/bin/cisco/dra_display.bin
killall: /usr/bin/cisco/dra_display.bin: no process killed
Starting /usr/bin/cisco/dra_display.bin ...
Couldn't fit the whole UART log on here due to char limit...

Is there is an android emulator I can run on a PC with Xeon processor?

I have a PC with an Intel Xeon E5630 # 2.53GHz.
I cannot run Android Studio emulator or Genymotion emulator.
When I tried to run Android Studio emulator, I had this error:
Emulator: qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.80000001H:ECX.abm [bit 5]
After some updates for the motherboard and uninstalling to the emulator and reinstall it, I get those errors:
Emulator: emulator: ERROR: unknown skin name 'pixel_xl_silver'
Emulator: Process finished with exit code 1
Here is the CPU information:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 44
model name : Intel(R) Xeon(R) CPU E5630 # 2.53GHz
stepping : 2
microcode : 0x1f
cpu MHz : 1627.786
cache size : 12288 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdt
scp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cp
uid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xt
pr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm epb pti ssbd ibrs ibpb stibp t
pr_shadow vnmi flexpriority ept vpid dtherm ida arat flush_l1d
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds
swapgs
bogomips : 5066.68
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 44
model name : Intel(R) Xeon(R) CPU E5630 # 2.53GHz
stepping : 2
microcode : 0x1f
cpu MHz : 1647.835
cache size : 12288 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid dtherm ida arat flush_l1d
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs
bogomips : 5066.68
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 44
model name : Intel(R) Xeon(R) CPU E5630 # 2.53GHz
stepping : 2
microcode : 0x1f
cpu MHz : 1725.616
cache size : 12288 KB
physical id : 0
siblings : 4
core id : 9
cpu cores : 4
apicid : 18
initial apicid : 18
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid dtherm ida arat flush_l1d
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs
bogomips : 5066.68
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 44
model name : Intel(R) Xeon(R) CPU E5630 # 2.53GHz
stepping : 2
microcode : 0x1f
cpu MHz : 1673.013
cache size : 12288 KB
physical id : 0
siblings : 4
core id : 10
cpu cores : 4
apicid : 20
initial apicid : 20
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid dtherm ida arat flush_l1d
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs
bogomips : 5066.68
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
Could someone help?

Eclipse crashing on launch

I recently deleted eclipse and the ADT bundle because some files got accidentally deleted and I wanted to install it fresh over again but when I unzipped the file and opened eclipse I am getting this crash log I am unsure of how to fix this and would appreciate if anybody could help me that has any knowledge on this.
Process: eclipse [1032]
Path: /Volumes/VOLUME/*/Eclipse.app/Contents/MacOS/eclipse
Identifier: org.eclipse.eclipse
Version: 3.8 (3.8)
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: eclipse [1032]
User ID: 501
Date/Time: 2016-12-23 22:49:53.824 -0600
OS Version: Mac OS X 10.12.2 (16C67)
Report Version: 12
Anonymous UUID: 7EB9EBB2-D3B9-8F3B-EC33-B888DDDA4C54
Time Awake Since Boot: 1900 seconds
System Integrity Protection: enabled
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000000000003c
Exception Note: EXC_CORPSE_NOTIFY
Termination Signal: Segmentation fault: 11
Termination Reason: Namespace SIGNAL, Code 0xb
Terminating Process: exc handler [0]
VM Regions Near 0x3c:
-->
__TEXT 0000000100000000-0000000100004000 [ 16K] r-x/rwx SM=COW /var/folders/*/Eclipse.app/Contents/MacOS/eclipse
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 com.apple.CoreFoundation 0x00007fffb27d3544 CFBundleGetFunctionPointerForName + 36
1 org.eclipse.eclipse 0x00000001000030bd findSymbol + 66
2 org.eclipse.eclipse 0x00000001000018be original_main + 1572
3 org.eclipse.eclipse 0x0000000100001f7d main + 1230
4 org.eclipse.eclipse 0x0000000100001158 start + 52
Thread 1:
0 libsystem_pthread.dylib 0x00007fffc7edd1e0 start_wqthread + 0
Thread 2:
0 libsystem_pthread.dylib 0x00007fffc7edd1e0 start_wqthread + 0
Thread 3:
0 libsystem_pthread.dylib 0x00007fffc7edd1e0 start_wqthread + 0
1 ??? 0x000070000965bb40 0 + 123145459972928
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000610000020140 rbx: 0x0000000000000000 rcx: 0x6974696e49746573 rdx: 0x0000000000000006
rdi: 0x0000000000000000 rsi: 0x0000610000020140 rbp: 0x00007fff5fbff9b0 rsp: 0x00007fff5fbff580
r8: 0x736772416c616974 r9: 0x0000000000000600 r10: 0x0000000000000002 r11: 0x00007fffb27d3520
r12: 0x00000001000043f8 r13: 0x00006100000a0000 r14: 0x0000610000020140 r15: 0x02b18d72892400a7
rip: 0x00007fffb27d3544 rfl: 0x0000000000010202 cr2: 0x000000010d7c7000
Logical CPU: 0
Error Code: 0x02000170
Trap Number: 133

Android on Asus Fonepad 7 report to be armeabi-v7a even if it's an X86

In my app I check the CPU from Build.CPU_ABI and if the CPU is X86 ask the user to download the correct package with X86 libraries bundled.
But today I got an Asus Fonepad 7 with an Intel CPU, but surprisingly the Build.CPU_ABI is armeabi-v7a instead of X86. I read somewhere that because many developers don't bundle X86 native libraries in their apps, Asus has used an ARM-X86 translator so the app think is running on an Arm device. More surprisingly even if X86 libraries are bundled it still loads Arm libraries.
I believe code translation reduce performance dramatically. So is there any way to determine the real CPU arch? And after that force X86 libraries to be loaded instead of Arm?
------ EDIT --------
When I removed the armeabi-v7a folder from the package **Build.CPU_ABI become X86 and now it loads the X86 codes.**
I checked out /proc/cpuinfo, the only thing which is clear is it packs an Intel CPU. So is it safe to consider the CPU an X86 if intel word appear in cpuinfo?
And the only option is to have two different APKs, one for arm another for X86. because if all binaries are in the same APK file, Arm binaries are loaded no matter what!
This is /proc/cpuinfo content:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 90
model name : Genuine Intel(R) CPU 4000 # 1.00GHz
stepping : 0
microcode : 0x27
cpu MHz : 1833.000
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms
bogomips : 1996.80
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 90
model name : Genuine Intel(R) CPU 4000 # 1.00GHz
stepping : 0
microcode : 0x27
cpu MHz : 1833.000
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms
bogomips : 1996.80
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 90
model name : Genuine Intel(R) CPU 4000 # 1.00GHz
stepping : 0
microcode : 0x27
cpu MHz : 1833.000
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 4
initial apicid : 4
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms
bogomips : 1996.80
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 90
model name : Genuine Intel(R) CPU 4000 # 1.00GHz
stepping : 0
microcode : 0x27
cpu MHz : 1833.000
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 6
initial apicid : 6
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms
bogomips : 1996.80
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

you could read /proc/cpuinfo
➜ ~ adb shell
shell#android:/ $ cat /proc/cpuinfo
Processor : ARMv7 Processor rev 10 (v7l)

getprop | grep -i cpu
This will tell you all of the available abis... getprop, in general, is useful for getting more gritty sysinfo.

Error when exporting android project when library added

Since a couple of month ago I've been working with Android developing in Eclipse and AndEngine. I haven't had any problems to export my project until a couple of weeks ago when I suddenly got an error when I tried to export my project. The error only occurs when AndEngine (or any of its extensions) is added in the project's library. I have searched for a solution day and night now and I hope someone can help me! I do not know if it’s only AndEngine or if I can’t export just because I have something added in the library.
I have installed Eclipse in two completely different systems - one Windows, the other Linux Mint - no one works!
This is how I do:
I create a new android project, including an activity. I try to export it - it works. After that, I add AndEngine through properties>Android>Library. I try to export - I get an error - "Conversion to Dalvik format failed with error 1" in Windows 7 and in Linux Eclipse crashes.
In Linux Eclipse creates a log-file, but I'm not skilled enough to interpret it myself ... :-/
Perhaps it is something with the latest updates of the Android sdk or something like that ... I do not know. And the strange thing is that it I seem to be the only one getting this error - on two different systems! Am I doing anything wrong or what is this?!
If anyone would like to help I would be so happy I do not know what to do!
Johan
Here is the error log that I got:
#
# A fatal error has been detected by the Java Runtime Environment:
#
# SIGBUS (0x7) at pc=0x00007f7ab35c053e, pid=2405, tid=140164621686528
#
# JRE version: 6.0_24-b24
# Java VM: OpenJDK 64-Bit Server VM (20.0-b12 mixed mode linux-amd64 compressed oops)
# Derivative: IcedTea6 1.11.1
# Distribution: Ubuntu 12.04 LTS, package 6b24-1.11.1-4ubuntu3
# Problematic frame:
# C [libzip.so+0x453e] Java_java_util_zip_ZipEntry_initFields+0xc3e
#
# If you would like to submit a bug report, please include
# instructions how to reproduce the bug and visit:
# https://bugs.launchpad.net/ubuntu/+source/openjdk-6/
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
#
--------------- T H R E A D ---------------
Current thread (0x00007f7ab4a2b800): JavaThread "ModalContext" [_thread_in_native, id=2683, stack(0x00007f7a9e6c5000,0x00007f7a9e7c6000)]
siginfo:si_signo=SIGBUS: si_errno=0, si_code=2 (BUS_ADRERR), si_addr=0x00007f7a9ddb4124
Registers:
RAX=0x00007f7a34000fa0, RBX=0x00007f7a9ddb4107, RCX=0x00007f7a34000040, RDX=0x00007f7a34000020
RSP=0x00007f7a9e7c3310, RBP=0x00007f7a9e7c3350, RSI=0x00007f7a34000038, RDI=0x0000000000000003
R8 =0x00007f7a34048100, R9 =0x0000000000000000, R10=0x00007f7ab06f9d78, R11=0x00007f7ab9ef44d0
R12=0x00007f7a34000fa0, R13=0x00007f7a9e7c33c0, R14=0x00007f7a34007e50, R15=0x00007f7a340087f8
RIP=0x00007f7ab35c053e, EFLAGS=0x0000000000010202, CSGSFS=0x0000000000000033, ERR=0x0000000000000004
TRAPNO=0x000000000000000e
Top of Stack: (sp=0x00007f7a9e7c3310)
0x00007f7a9e7c3310: 00007f7a9e7c3330 00007f7ab95b7b71
0x00007f7a9e7c3320: 00007f7a34007e50 00007f7a34007e50
0x00007f7a9e7c3330: 000000008433e918 00007f7a9e7c33c0
0x00007f7a9e7c3340: 0000000000000000 00007f7a340087f8
0x00007f7a9e7c3350: 00007f7a9e7c33a0 00007f7ab35c0dea
0x00007f7a9e7c3360: 00007f7ab4a2b800 00007f7a34004cc0
0x00007f7a9e7c3370: 00007f7ab4a2b800 00007f7ab4a2b9d0
0x00007f7a9e7c3380: 00007f7a9e7c33c0 0000000000000029
0x00007f7a9e7c3390: 00007f7a9e7c3818 00007f7a9e7c33c0
0x00007f7a9e7c33a0: 00007f7a9e7c3800 00007f7ab35bf4a9
0x00007f7a9e7c33b0: 0000002900000000 00007f7a34007e50
0x00007f7a9e7c33c0: 65646e612f67726f 75612f656e69676e
0x00007f7a9e7c33d0: 657361422f6f6964 746e456f69647541
0x00007f7a9e7c33e0: 73616c632e797469 0000000000000073
0x00007f7a9e7c33f0: 00000000f9b29a28 00007f7a9e7c33f8
0x00007f7a9e7c3400: 00000000dc3bf5b2 00007f7a9e7c3450
0x00007f7a9e7c3410: 00000000dc3bfeb8 0000000000000000
0x00007f7a9e7c3420: 00000000dc3bf5d8 0000000000000000
0x00007f7a9e7c3430: 00007f7a9e7c3498 00007f7ab05c1a82
0x00007f7a9e7c3440: 00007f7ab05c1a82 00000000dbd92860
0x00007f7a9e7c3450: 0000000000000002 00007f7a9e7c3458
0x00007f7a9e7c3460: 00000000dc3bf7d3 00007f7a9e7c34c8
0x00007f7a9e7c3470: 00000000dc3bfeb8 0000000000000000
0x00007f7a9e7c3480: 00000000dc3bf830 0000000000000000
0x00007f7a9e7c3490: 00007f7a9e7c34c0 00007f7a9e7c3510
0x00007f7a9e7c34a0: 00007f7ab05c1e8d 00000000f9b29f90
0x00007f7a9e7c34b0: 0000000000000002 0000000000000002
0x00007f7a9e7c34c0: 00007f7a9e7c3530 00007f7ab05c196e
0x00007f7a9e7c34d0: 00007f7a9e7c34d0 00007f7ab05c196e
0x00007f7a9e7c34e0: 00000000f9a860c8 00000000f9ac9b70
0x00007f7a9e7c34f0: 00007f7a9e7c34f0 00000000dc3b1448
0x00007f7a9e7c3500: 00007f7a9e7c3568 00007f7ab05c196e
Instructions: (pc=0x00007f7ab35c053e)
0x00007f7ab35c051e: c7 00 00 00 00 00 48 c7 40 30 00 00 00 00 48 c7
0x00007f7ab35c052e: 40 28 00 00 00 00 8b 1b 49 2b 5e 28 49 03 5e 18
0x00007f7ab35c053e: 44 0f b6 7b 1d 0f b6 43 1c 0f b6 53 0c 0f b6 4b
0x00007f7ab35c054e: 0e 44 0f b6 6b 1f 41 c1 e7 08 41 09 c7 0f b6 43
Register to memory mapping:
RAX=0x00007f7a34000fa0 is an unknown value
RBX=0x00007f7a9ddb4107 is an unknown value
RCX=0x00007f7a34000040 is an unknown value
RDX=0x00007f7a34000020 is an unknown value
RSP=0x00007f7a9e7c3310 is pointing into the stack for thread: 0x00007f7ab4a2b800
RBP=0x00007f7a9e7c3350 is pointing into the stack for thread: 0x00007f7ab4a2b800
RSI=0x00007f7a34000038 is an unknown value
RDI=0x0000000000000003 is an unknown value
R8 =0x00007f7a34048100 is an unknown value
R9 =0x0000000000000000 is an unknown value
R10=0x00007f7ab06f9b90 [CodeBlob (0x00007f7ab06f9b90)]
Framesize: 10
R11=0x00007f7ab9ef44d0: <offset 0x1814d0> in /lib/x86_64-linux-gnu/libc.so.6 at 0x00007f7ab9d73000
R12=0x00007f7a34000fa0 is an unknown value
R13=0x00007f7a9e7c33c0 is pointing into the stack for thread: 0x00007f7ab4a2b800
R14=0x00007f7a34007e50 is an unknown value
R15=0x00007f7a340087f8 is an unknown value
Stack: [0x00007f7a9e6c5000,0x00007f7a9e7c6000], sp=0x00007f7a9e7c3310, free space=1016k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [libzip.so+0x453e] Java_java_util_zip_ZipEntry_initFields+0xc3e
C [libzip.so+0x4dea] ZIP_GetEntry+0xba
C [libzip.so+0x34a9] Java_java_util_zip_ZipFile_getEntry+0x119
J java.util.zip.ZipFile.getEntry(JLjava/lang/String;Z)J
j java.util.zip.ZipFile.getInputStream(Ljava/lang/String;)Ljava/io/InputStream;+34
j java.util.zip.ZipFile.getInputStream(Ljava/util/zip/ZipEntry;)Ljava/io/InputStream;+5
j com.android.dx.cf.direct.ClassPathOpener.processArchive(Ljava/io/File;)Z+118
j com.android.dx.cf.direct.ClassPathOpener.processOne(Ljava/io/File;Z)Z+48
j com.android.dx.cf.direct.ClassPathOpener.process()Z+15
j com.android.dx.command.dexer.Main.processOne(Ljava/lang/String;)Z+18
j com.android.dx.command.dexer.Main.processAllFiles()Z+100
j com.android.dx.command.dexer.Main.run(Lcom/android/dx/command/dexer/Main$Arguments;)I+76
v ~StubRoutines::call_stub
V [libjvm.so+0x4afabf] JavaCalls::call_helper(JavaValue*, methodHandle*, JavaCallArguments*, Thread*)+0x29f
V [libjvm.so+0x4aeef5] JavaCalls::call(JavaValue*, methodHandle, JavaCallArguments*, Thread*)+0x25
V [libjvm.so+0x6a8cc7] Reflection::invoke(instanceKlassHandle, methodHandle, Handle, bool, objArrayHandle, BasicType, objArrayHandle, bool, Thread*)+0x667
V [libjvm.so+0x6ab12b] Reflection::invoke_method(oopDesc*, Handle, objArrayHandle, Thread*)+0x16b
V [libjvm.so+0x4f4b08] JVM_InvokeMethod+0x148
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+161
j com.android.ide.eclipse.adt.internal.build.DexWrapper.run(Ljava/lang/String;Ljava/util/Collection;ZLjava/io/PrintStream;Ljava/io/PrintStream;)I+309
j com.android.ide.eclipse.adt.internal.build.BuildHelper.executeDx(Lorg/eclipse/jdt/core/IJavaProject;Ljava/util/Collection;Ljava/lang/String;)V+138
j com.android.ide.eclipse.adt.internal.project.ExportHelper.exportReleaseApk(Lorg/eclipse/core/resources/IProject;Ljava/io/File;Ljava/security/PrivateKey;Ljava/security/cert/X509Certificate;Lorg/eclipse/core/runtime/IProgressMonitor;)V+780
j com.android.ide.eclipse.adt.internal.wizards.export.ExportWizard.doExport(Lorg/eclipse/core/runtime/IProgressMonitor;)Z+269
j com.android.ide.eclipse.adt.internal.wizards.export.ExportWizard.access$0(Lcom/android/ide/eclipse/adt/internal/wizards/export/ExportWizard;Lorg/eclipse/core/runtime/IProgressMonitor;)Z+2
j com.android.ide.eclipse.adt.internal.wizards.export.ExportWizard$1.run(Lorg/eclipse/core/runtime/IProgressMonitor;)V+10
j org.eclipse.jface.operation.ModalContext$ModalContextThread.run()V+15
v ~StubRoutines::call_stub
V [libjvm.so+0x4afabf] JavaCalls::call_helper(JavaValue*, methodHandle*, JavaCallArguments*, Thread*)+0x29f
V [libjvm.so+0x4aeef5] JavaCalls::call(JavaValue*, methodHandle, JavaCallArguments*, Thread*)+0x25
V [libjvm.so+0x4af3f3] JavaCalls::call_virtual(JavaValue*, KlassHandle, symbolHandle, symbolHandle, JavaCallArguments*, Thread*)+0x1a3
V [libjvm.so+0x4af51f] JavaCalls::call_virtual(JavaValue*, Handle, KlassHandle, symbolHandle, symbolHandle, Thread*)+0x4f
V [libjvm.so+0x4e4fd6] thread_entry(JavaThread*, Thread*)+0x86
V [libjvm.so+0x74c098] JavaThread::thread_main_inner()+0x58
V [libjvm.so+0x64bbb2] java_start(Thread*)+0x112
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
J java.util.zip.ZipFile.getEntry(JLjava/lang/String;Z)J
j java.util.zip.ZipFile.getInputStream(Ljava/lang/String;)Ljava/io/InputStream;+34
j java.util.zip.ZipFile.getInputStream(Ljava/util/zip/ZipEntry;)Ljava/io/InputStream;+5
j com.android.dx.cf.direct.ClassPathOpener.processArchive(Ljava/io/File;)Z+118
j com.android.dx.cf.direct.ClassPathOpener.processOne(Ljava/io/File;Z)Z+48
j com.android.dx.cf.direct.ClassPathOpener.process()Z+15
j com.android.dx.command.dexer.Main.processOne(Ljava/lang/String;)Z+18
j com.android.dx.command.dexer.Main.processAllFiles()Z+100
j com.android.dx.command.dexer.Main.run(Lcom/android/dx/command/dexer/Main$Arguments;)I+76
v ~StubRoutines::call_stub
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+161
j com.android.ide.eclipse.adt.internal.build.DexWrapper.run(Ljava/lang/String;Ljava/util/Collection;ZLjava/io/PrintStream;Ljava/io/PrintStream;)I+309
j com.android.ide.eclipse.adt.internal.build.BuildHelper.executeDx(Lorg/eclipse/jdt/core/IJavaProject;Ljava/util/Collection;Ljava/lang/String;)V+138
j com.android.ide.eclipse.adt.internal.project.ExportHelper.exportReleaseApk(Lorg/eclipse/core/resources/IProject;Ljava/io/File;Ljava/security/PrivateKey;Ljava/security/cert/X509Certificate;Lorg/eclipse/core/runtime/IProgressMonitor;)V+780
j com.android.ide.eclipse.adt.internal.wizards.export.ExportWizard.doExport(Lorg/eclipse/core/runtime/IProgressMonitor;)Z+269
j com.android.ide.eclipse.adt.internal.wizards.export.ExportWizard.access$0(Lcom/android/ide/eclipse/adt/internal/wizards/export/ExportWizard;Lorg/eclipse/core/runtime/IProgressMonitor;)Z+2
j com.android.ide.eclipse.adt.internal.wizards.export.ExportWizard$1.run(Lorg/eclipse/core/runtime/IProgressMonitor;)V+10
j org.eclipse.jface.operation.ModalContext$ModalContextThread.run()V+15
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x00007f7a200d1800 JavaThread "Worker-12" [_thread_blocked, id=2718, stack(0x00007f7a9e298000,0x00007f7a9e399000)]
=>0x00007f7ab4a2b800 JavaThread "ModalContext" [_thread_in_native, id=2683, stack(0x00007f7a9e6c5000,0x00007f7a9e7c6000)]
0x00007f7a38001000 JavaThread "[ThreadPool Manager] - Idle Thread" daemon [_thread_blocked, id=2448, stack(0x00007f7a97897000,0x00007f7a97998000)]
0x00007f7ab4761000 JavaThread "Bundle File Closer" daemon [_thread_blocked, id=2447, stack(0x00007f7a9d17a000,0x00007f7a9d27b000)]
0x00007f7a20001000 JavaThread "Worker-6" [_thread_blocked, id=2441, stack(0x00007f7a9da2a000,0x00007f7a9db2b000)]
0x00007f7a3008f800 JavaThread "Worker-5" [_thread_blocked, id=2440, stack(0x00007f7a9db2b000,0x00007f7a9dc2c000)]
0x00007f7a30081800 JavaThread "Worker-4" [_thread_blocked, id=2439, stack(0x00007f7a9dc2c000,0x00007f7a9dd2d000)]
0x00007f7a44019800 JavaThread "Worker-2" [_thread_in_native, id=2437, stack(0x00007f7a9e399000,0x00007f7a9e49a000)]
0x00007f7ab443f000 JavaThread "Java indexing" daemon [_thread_blocked, id=2436, stack(0x00007f7a9de20000,0x00007f7a9df21000)]
0x00007f7a4c040000 JavaThread "Worker-JM" [_thread_blocked, id=2431, stack(0x00007f7a9fafb000,0x00007f7a9fbfc000)]
0x00007f7a4c03b800 JavaThread "[Timer] - Main Queue Handler" daemon [_thread_blocked, id=2430, stack(0x00007f7a9fbfc000,0x00007f7a9fcfd000)]
0x00007f7a4c015800 JavaThread "Framework Event Dispatcher" daemon [_thread_blocked, id=2428, stack(0x00007f7a9fdfe000,0x00007f7a9feff000)]
0x00007f7ab41e4000 JavaThread "Start Level Event Dispatcher" daemon [_thread_blocked, id=2427, stack(0x00007f7a9feff000,0x00007f7aa0000000)]
0x00007f7ab41fd800 JavaThread "State Data Manager" daemon [_thread_blocked, id=2426, stack(0x00007f7aa4021000,0x00007f7aa4122000)]
0x00007f7ab41c2800 JavaThread "Framework Active Thread" [_thread_blocked, id=2425, stack(0x00007f7aa4122000,0x00007f7aa4223000)]
0x00007f7ab40a5800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2421, stack(0x00007f7aae3bd000,0x00007f7aae4be000)]
0x00007f7ab40a3800 JavaThread "C2 CompilerThread1" daemon [_thread_in_native, id=2420, stack(0x00007f7aae4be000,0x00007f7aae5bf000)]
0x00007f7ab40a0800 JavaThread "C2 CompilerThread0" daemon [_thread_in_native, id=2419, stack(0x00007f7aae5bf000,0x00007f7aae6c0000)]
0x00007f7ab4092800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2418, stack(0x00007f7aae6c0000,0x00007f7aae7c1000)]
0x00007f7ab4080000 JavaThread "Finalizer" daemon [_thread_blocked, id=2417, stack(0x00007f7aaeea4000,0x00007f7aaefa5000)]
0x00007f7ab407e000 JavaThread "Reference Handler" daemon [_thread_blocked, id=2416, stack(0x00007f7aaefa5000,0x00007f7aaf0a6000)]
0x00007f7ab4008000 JavaThread "main" [_thread_in_native, id=2406, stack(0x00007f7aba858000,0x00007f7aba959000)]
Other Threads:
0x00007f7ab4077800 VMThread [stack: 0x00007f7aaf0a6000,0x00007f7aaf1a7000] [id=2415]
0x00007f7ab40a8000 WatcherThread [stack: 0x00007f7aae2bc000,0x00007f7aae3bd000] [id=2422]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
PSYoungGen total 54656K, used 5004K [0x00000000f8000000, 0x00000000fc550000, 0x0000000100000000)
eden space 38720K, 7% used [0x00000000f8000000,0x00000000f82a96f8,0x00000000fa5d0000)
from space 15936K, 14% used [0x00000000fb5c0000,0x00000000fb7f9c88,0x00000000fc550000)
to space 16128K, 0% used [0x00000000fa5d0000,0x00000000fa5d0000,0x00000000fb590000)
PSOldGen total 79168K, used 52829K [0x00000000e8000000, 0x00000000ecd50000, 0x00000000f8000000)
object space 79168K, 66% used [0x00000000e8000000,0x00000000eb3974d0,0x00000000ecd50000)
PSPermGen total 130432K, used 71024K [0x00000000d8000000, 0x00000000dff60000, 0x00000000e8000000)
object space 130432K, 54% used [0x00000000d8000000,0x00000000dc55c010,0x00000000dff60000)
Code Cache [0x00007f7ab05bc000, 0x00007f7ab0e8c000, 0x00007f7ab35bc000)
total_blobs=2339 nmethods=1742 adapters=550 free_code_cache=41736384 largest_free_block=59712
Dynamic libraries:
I had to remove this part ... only 30 000 characters allowed
VM Arguments:
jvm_args: -Xms40m -Xmx384m -Dorg.eclipse.equinox.p2.reconciler.dropins.directory=/usr/share/eclipse/dropins -XX:MaxPermSize=256m
java_command: /usr/lib/eclipse//plugins/org.eclipse.equinox.launcher_1.2.0.dist.jar -os linux -ws gtk -arch x86_64 -showsplash -launcher /usr/lib/eclipse/eclipse -name Eclipse --launcher.library /usr/lib/eclipse//plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.100.dist/eclipse_1408.so -startup /usr/lib/eclipse//plugins/org.eclipse.equinox.launcher_1.2.0.dist.jar --launcher.overrideVmargs -exitdata f8005 -vm /usr/bin/java -vmargs -Xms40m -Xmx384m -Dorg.eclipse.equinox.p2.reconciler.dropins.directory=/usr/share/eclipse/dropins -XX:MaxPermSize=256m -jar /usr/lib/eclipse//plugins/org.eclipse.equinox.launcher_1.2.0.dist.jar
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
USERNAME=johan
LD_LIBRARY_PATH=/usr/lib/jvm/java-6-openjdk-amd64/jre/lib/amd64/server:/usr/lib/jvm/java-6-openjdk-amd64/jre/lib/amd64:/usr/lib/jvm/java-6-openjdk-amd64/jre/../lib/amd64
SHELL=/bin/bash
DISPLAY=:0.0
Signal Handlers:
SIGSEGV: [libjvm.so+0x7842c0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGBUS: [libjvm.so+0x7842c0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGFPE: [libjvm.so+0x648540], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGPIPE: SIG_IGN, sa_mask[0]=0x00001000, sa_flags=0x10000000
SIGXFSZ: [libjvm.so+0x648540], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGILL: [libjvm.so+0x648540], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGUSR2: [libjvm.so+0x6486f0], sa_mask[0]=0x00000000, sa_flags=0x10000004
SIGHUP: [libjvm.so+0x64b210], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGINT: [libjvm.so+0x64b210], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGTERM: [libjvm.so+0x64b210], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGQUIT: [libjvm.so+0x64b210], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
--------------- S Y S T E M ---------------
OS:LinuxMint 13 (maya)
uname:Linux 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64
libc:glibc 2.15 NPTL 2.15
rlimit: STACK 8192k, CORE 0k, NPROC 127501, NOFILE 4096, AS infinity
load average:1.69 1.02 0.47
/proc/meminfo:
MemTotal: 16337780 kB
MemFree: 14311524 kB
Buffers: 75920 kB
Cached: 693268 kB
SwapCached: 0 kB
Active: 1111276 kB
Inactive: 608384 kB
Active(anon): 960444 kB
Inactive(anon): 183040 kB
Active(file): 150832 kB
Inactive(file): 425344 kB
Unevictable: 96 kB
Mlocked: 96 kB
SwapTotal: 16678908 kB
SwapFree: 16678908 kB
Dirty: 5948 kB
Writeback: 0 kB
AnonPages: 951204 kB
Mapped: 124272 kB
Shmem: 192228 kB
Slab: 74556 kB
SReclaimable: 43580 kB
SUnreclaim: 30976 kB
KernelStack: 3008 kB
PageTables: 20856 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 24847796 kB
Committed_AS: 2139640 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 389744 kB
VmallocChunk: 34359345424 kB
HardwareCorrupted: 0 kB
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 71668 kB
DirectMap2M: 16615424 kB
CPU:total 8 (4 cores per cpu, 2 threads per core) family 6 model 42 stepping 7, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, popcnt, ht
Memory: 4k page, physical 16337780k(14311524k free), swap 16678908k(16678908k free)
vm_info: OpenJDK 64-Bit Server VM (20.0-b12) for linux-amd64 JRE (1.6.0_24-b24), built on Apr 21 2012 01:49:27 by "buildd" with gcc 4.6.3
time: Sun Jun 24 16:12:57 2012
elapsed time: 194 seconds
I just want to make a thing clear:
I can run the application on, for example, my cellphone, via Eclipse - it's the exporting with keystore and that, that doesn't work.

I know this is an old thread, but I seem to have found another solution. Generally, I found that Eclipse would either crash completely or just freeze/hang if I try to export a project that has a dependency on another library project. I've seen this several times with both my own library projects as well as 3rd party ones.
The simple solution I found is turning off automatic build. That is, compete everything, then just before doing "export", uncheck "Build Automatically" under the "Project" menu - and export as usual.

Today I stumbled upon exactly the same problem and I also coulnd't find a solution to it anywhere. It is strange because I have never had this problem before and I have already worked with AndEngine many times. I tried a couple of different things and one of them totally solved the problem although I have no idea why.
Solution:
Don't add the AndEngine to libraries list (through properties -> Android -> Library)
Copy the "libs" directory from AndEngine to your application.
Copy the "andengine.jar" from AndEngine's "bin" directory to some directory in your application.
Close the AndEngine project. You don't need it to do the export anymore.
Right click on your project. Go to: "Properties -> Libraries -> Add JARs" and add the JAR you just copied.
Go to Properties -> "Libraries -> Order and Export" and make sure the JAR file you just added is selected.
It would be great if someone could tell us why this solves the problem and if there are any better solutions.