I have a problem detecting speed traffic signs with opencv 2.4 for Android.
I do the following:
"capture frame -> convert it to HSV -> extract red areas -> detect signs with ellipse detection"
So far ellipse detection works perfect as long as picture is good quality.
But as you see in pictures bellow, that red extraction does not work OK, because of poor quality of picture frames, by my opinion.
Converting original image to HSV:
Imgproc.cvtColor(this.source, this.source, Imgproc.COLOR_RGB2HSV, 3);
Extracting red colors:
Core.inRange(this.source, new Scalar(this.h,this.s,this.v), new Scalar(230,180,180), this.source);
So my question is is there another way of detecting traffic sign like this or extracting red areas out of it, which by the way can be very faint like in last picture ?
This is the original image:
This is converted to HSV, as you can see red areas look the same color as nearby trees. Thats how I'm suppose to know it's red but I can't.
Converted to HSV:
This is with red colors extracted. If colors would be correct I should get almost perfect circle/ellipse around sign, but it is incomplet due to false colors.
Result after extraction:
Ellipse method:
private void findEllipses(Mat input){
Mat thresholdOutput = new Mat();
int thresh = 150;
List<MatOfPoint> contours = new ArrayList<MatOfPoint>();
MatOfInt4 hierarchy = new MatOfInt4();
Imgproc.threshold(source, thresholdOutput, thresh, 255, Imgproc.THRESH_BINARY);
//Imgproc.Canny(source, thresholdOutput, 50, 180);
Imgproc.findContours(source, contours, hierarchy, Imgproc.RETR_LIST, Imgproc.CHAIN_APPROX_SIMPLE);
RotatedRect minEllipse[] = new RotatedRect[contours.size()];
for(int i=0; i<contours.size();i++){
MatOfPoint2f temp=new MatOfPoint2f(contours.get(i).toArray());
if(temp.size().height > minEllipseSize && temp.size().height < maxEllipseSize){
double a = Imgproc.fitEllipse(temp).size.height;
double b = Imgproc.fitEllipse(temp).size.width;
if(Math.abs(a - b) < 10)
minEllipse[i] = Imgproc.fitEllipse(temp);
}
}
detectedObjects.clear();
for( int i = 0; i< contours.size(); i++ ){
Scalar color = new Scalar(180, 255, 180);
if(minEllipse[i] != null){
detectedObjects.add(new DetectedObject(minEllipse[i].center));
DetectedObject detectedObj = new DetectedObject(minEllipse[i].center);
Core.ellipse(source, minEllipse[i], color, 2, 8);
}
}
}
Problematic sign:
You can find a review of traffic signs detection methods here and here.
You'll see that there are 2 ways you can achieve this:
Color-based (like what you're doing now)
Shape-based
In my experience, I found that shape-based methods works pretty good, because the color may change a lot under different lighting conditions, camera quality, etc.
Since you need to detect speed traffic signs, which I assume are always circular, you can use an ellipse detector to find all circular objects in your image, and then apply some validation to determine if it's a traffic sign or not.
Why ellipse detection?
Well, since you're looking for perspective distorted circles, you are in fact looking for ellipses. Real-time ellipse detection is an interesting (although limited) research topic. I'll point you out to 2 papers with C++ source code available (which you can use in you app through native JNI calls):
L. Libuda, I. Grothues, K.-F. Kraiss, Ellipse detection in digital image
data using geometric features, in: J. Braz, A. Ranchordas, H. Arajo,
J. Jorge (Eds.), Advances in Computer Graphics and Computer Vision,
volume 4 of Communications in Computer and Information Science,
Springer Berlin Heidelberg, 2007, pp. 229-239. link, code
M. Fornaciari, A. Prati, R. Cucchiara,
"A fast and effective ellipse detector for embedded vision applications", Pattern Recognition, 2014 link, code
UPDATE
I tried the method 2) without any preprocessing. You can see that at least the sign with the red border is detected very good:
Referencing to your text:
This is converted to HSV, as you can see red areas look the same color
as nearby trees. Thats how I'm suppose to know it's red but I can't.
I want to show you my result of basically what you did (simple operations should be easily transferable to android openCV):
// convert to HSV
cv::Mat hsv;
cv::cvtColor(input,hsv,CV_BGR2HSV);
std::vector<cv::Mat> channels;
cv::split(hsv,channels);
// opencv = hue values are divided by 2 to fit 8 bit range
float red1 = 25/2.0f;
// red has one part at the beginning and one part at the end of the range (I assume 0° to 25° and 335° to 360°)
float red2 = (360-25)/2.0f;
// compute both thresholds
cv::Mat thres1 = channels[0] < red1;
cv::Mat thres2 = channels[0] > red2;
// choose some minimum saturation
cv::Mat saturationThres = channels[1] > 50;
// combine the results
cv::Mat redMask = (thres1 | thres2) & saturationThres;
// display result
cv::imshow("red", redMask);
These are my results:
From your result, please mind that findContours alters the input image, so maybe you extracted the ellipse but just don't see it in the image anymore, if you saved the image AFTER findContours.
private void findEllipses(Mat input){
Mat thresholdOutput = new Mat();
int thresh = 150;
List<MatOfPoint> contours = new ArrayList<MatOfPoint>();
MatOfInt4 hierarchy = new MatOfInt4();
Imgproc.threshold(source, thresholdOutput, thresh, 255, Imgproc.THRESH_BINARY);
//Imgproc.Canny(source, thresholdOutput, 50, 180);
Imgproc.findContours(source, contours, hierarchy, Imgproc.RETR_LIST, Imgproc.CHAIN_APPROX_SIMPLE);
// source = thresholdOutput;
RotatedRect minEllipse[] = new RotatedRect[contours.size()];
for(int i=0; i<contours.size();i++){
MatOfPoint2f temp=new MatOfPoint2f(contours.get(i).toArray());
if(temp.size().height > minEllipseSize && temp.size().height < maxEllipseSize){
double a = Imgproc.fitEllipse(temp).size.height;
double b = Imgproc.fitEllipse(temp).size.width;
if(Math.abs(a - b) < 10)
minEllipse[i] = Imgproc.fitEllipse(temp);
}
}
detectedObjects.clear();
for( int i = 0; i< contours.size(); i++ ){
Scalar color = new Scalar(180, 255, 180);
if(minEllipse[i] != null){
detectedObjects.add(new DetectedObject(minEllipse[i].center));
DetectedObject detectedObj = new DetectedObject(minEllipse[i].center);
Core.ellipse(source, minEllipse[i], color, 2, 8);
}
}
}
have you tried using opencv ORB? it works really well.
I created a haar cascade for a traffic sign (roundabout in my case) and used opencv ORB to match features and remove any false positives.
For image recognition used Google's tensorflow and results were spectacular.
Related
I'm trying to detect yellow objects. I perform color segmentation in HSV color scheme, threshold to the yellow range using cvInRange, which returns a binary thresholded mask with the region detected shown in white, while other colors are ignored and blacked out. I thought that obtaining the edges would not only reduce the computation for findContour() and make changing edge planes more obvious. Hence instead of doing:
binary thresholded image -> findContour()
I did:
binary thresholded image -> Canny() -> findContour() instead.
See below for Code + Attached Pics of Image Frame Output displayed.
public Mat onCameraFrame(CameraBridgeViewBase.CvCameraViewFrame inputFrame) {
InputFrame = inputFrame.rgba();
Core.transpose(InputFrame,mat1); //transpose mat1(src) to mat2(dst), sorta like a Clone!
Imgproc.resize(mat1,mat2,InputFrame.size(),0,0,0); // params:(Mat src, Mat dst, Size dsize, fx, fy, interpolation) Extract the dimensions of the new Screen Orientation, obtain the new orientation's surface width & height. Try to resize to fit to screen.
Core.flip(mat2,InputFrame,-1); // mat3 now get updated, no longer is the Origi inputFrame.rgba BUT RATHER the transposed, resized, flipped version of inputFrame.rgba().
int rowWidth = InputFrame.rows();
int colWidth = InputFrame.cols();
Imgproc.cvtColor(InputFrame,InputFrame,Imgproc.COLOR_RGBA2RGB);
Imgproc.cvtColor(InputFrame,InputFrame,Imgproc.COLOR_RGB2HSV);
//============= binary threshold image to Yellow mask ============
Lower_Yellow = new Scalar(21,150,150); //HSV color scale H to adjust color, S to control color variation, V is indicator of amt of light required to be shine on object to be seen.
Upper_Yellow = new Scalar(31,255,360); //HSV color scale
Core.inRange(InputFrame,Lower_Yellow, Upper_Yellow, maskForYellow);
//============== Apply Morphology to remove noise ===================
final Size kernelSize = new Size(5, 5); //must be odd num size & greater than 1.
final Point anchor = new Point(-1, -1); //default (-1,-1) means that the anchor is at the center of the structuring element.
final int iterations = 1; //number of times dilation is applied. https://docs.opencv.org/3.4/d4/d76/tutorial_js_morphological_ops.html
Mat kernel = Imgproc.getStructuringElement(Imgproc.MORPH_ELLIPSE, kernelSize);
Imgproc.morphologyEx(maskForYellow, yellowMaskMorphed, Imgproc.MORPH_CLOSE, kernel, anchor, iterations); //dilate first to remove then erode. White regions becomes more pronounced, erode away black regions
//=========== Apply Canny to obtain edge detection ==============
Mat mIntermediateMat = new Mat();
Imgproc.GaussianBlur(yellowMaskMorphed,mIntermediateMat,new Size(9,9),0,0); //better result than kernel size (3,3, maybe cos reference area wider, bigger, can decide better whether inrange / out of range.
Imgproc.Canny(mIntermediateMat, mIntermediateMat, 5, 120); //try adjust threshold //https://stackoverflow.com/questions/25125670/best-value-for-threshold-in-canny
//============ apply findContour()==================
List<MatOfPoint> contours = new ArrayList<>();
Mat hierarchy = new Mat();
Imgproc.findContours(mIntermediateMat, contours, hierarchy, Imgproc.RETR_EXTERNAL, Imgproc.CHAIN_APPROX_SIMPLE, new Point(0, 0));
//=========== Use contourArea to find LargestBlob contour ===============
double maxArea1 = 0;
int maxAreaIndex1 = 0;
//MatOfPoint max_contours = new MatOfPoint();
Rect r = null;
ArrayList<Rect> rect_array = new ArrayList<Rect>();
for(int i=0; i < contours.size(); i++) {
//if(Imgproc.contourArea(contours.get(i)) > 300) { //Size of Mat contour # that particular point in ArrayList of Points.
double contourArea1 = Imgproc.contourArea(contours.get(i));
//Size of Mat contour # that particular point in ArrayList of Points.
if (maxArea1 < contourArea1){
maxArea1 = contourArea1;
maxAreaIndex1 = i;
}
//maxArea1 = Imgproc.contourArea(contours.get(i)); //assigned but nvr used
//max_contours = contours.get(i);
r = Imgproc.boundingRect(contours.get(maxAreaIndex1));
rect_array.add(r); //will only have 1 r in the array eventually, cos we will only take the one w largestContourArea.
}
Imgproc.cvtColor(InputFrame, InputFrame, Imgproc.COLOR_HSV2RGB);
//============ plot largest blob contour ================
if (rect_array.size() > 0) { //if got more than 1 rect found in rect_array, draw them out!
Iterator<Rect> it2 = rect_array.iterator(); //only got 1 though, this method much faster than drawContour, wont lag. =D
while (it2.hasNext()) {
Rect obj = it2.next();
//if
Imgproc.rectangle(InputFrame, obj.br(), obj.tl(),
new Scalar(0, 255, 0), 1);
}
}
Original Yellow object 1
Object in HSV color space 2
After cvInrRange to yellow Color - returns Binary Threshold Mask 3
Edges returned after applying Canny Edge Detection 4
I have tried both approaches, found that applying Canny() on threshold image helped to make the detection faster and more stable, hence I'm keeping that part in my code. My guess is that perhaps there are lesser points to compute after we apply Canny() and it also helps to make the edges more obvious, hence it becomes easier & faster to compute in findContour().
There was code for detect green bright laser dot in android openCV, but its detect all what ever that green colors, i want only detect bright laser, what ever that i done i had post it.
IF ANY LINK FOR THAT PLEASE LET ME KNOW
Imgproc.cvtColor(gray, hsv, Imgproc.COLOR_RGB2HSV);
Core.inRange(hsv, new Scalar(45,100, 100), new Scalar(75,255,255),
lowerRedRange);
Imgproc.threshold(lowerRedRange, bw, 0, 255,Imgproc.THRESH_BINARY);
// dilate canny output to remove potential
// holes between edge segments
Imgproc.dilate(bw, bw, new Mat(), new Point(-1, 1), 1);
// find contours and store them all as a list
List<MatOfPoint> contours = new ArrayList<>();
contourImage = bw.clone();
Imgproc.findContours(
contourImage,
contours,
hierarchyOutputVector,
Imgproc.RETR_EXTERNAL,
Imgproc.CHAIN_APPROX_SIMPLE
);
// loop over all found contours
for (MatOfPoint cnt : contours) {
MatOfPoint2f curve = new MatOfPoint2f(cnt.toArray());
// approximates a polygonal curve with the specified precision
Imgproc.approxPolyDP(
curve,
approxCurve,
0.02 * Imgproc.arcLength(curve, true),
true
);
int numberVertices = (int) approxCurve.total();
double contourArea = Imgproc.contourArea(cnt);
Log.d(TAG, "vertices:" + numberVertices);
// ignore to small areas
if (Math.abs(contourArea) < 100
// || !Imgproc.isContourConvex(
) {
continue;}
if (numberVertices >= 4 && numberVertices <= 6) {
}
else {// circle detection}
Your color ranges are not strict enough. In the image below you can see the values I used. The circle around the dot is actually easiest to separate. The dot is harder because it contains very white colors, that is, colors with low saturation. But so does the background, so use the ring instead.
If you want the dot specifically, you can use the inner contour of the ring.
Note: inRange returns a binary mask, so this line in your code does nothing:
Imgproc.threshold(lowerRedRange, bw, 0, 255,Imgproc.THRESH_BINARY);
Update: request for the code in the comments.
The picture with the sliders is a Python script you can find on GitHub
Code for the detail picture with the final result:
import cv2
import numpy as np
# load image
img = cv2.imread("BPcph.jpg")
# convert to HSV
hsv = cv2.cvtColor(img, cv2.COLOR_BGR2HSV)
# set lower and upper color limits
lower_val = np.array([58,204,219])
upper_val = np.array([101,255,255])
# Threshold the HSV image
mask = cv2.inRange(hsv, lower_val, upper_val)
# remove noise
kernel = np.ones((5,5),np.uint8)
mask = cv2.morphologyEx(mask, cv2.MORPH_CLOSE, kernel)
# find contours in mask
im2, contours, hierarchy = cv2.findContours(mask, cv2.RETR_TREE, cv2.CHAIN_APPROX_SIMPLE)
# draw contours
for cnt in contours:
cv2.drawContours(img,[cnt],0,(0,0,255),2)
#show image
cv2.imshow("img", img)
cv2.waitKey(0)
cv2.destroyAllWindows()
I have tried 2 methodologies as follows:-
conversion of image to Mat
apply gaussian blur
then canny edge detection
find contours
The problem with this method is:
too many contours are detected
mostly open contours
doesn't detect what I want to detect
Then I changed my approach and tried adaptive thresholding after gaussian blur/median blur and it is much better and I am able to detect the corners in 50% cases
The current problem I am facing is that the page detection requires contrasting and plain background without any reflections. I think it's too idealistic for real world use.
This is where I would like some help. Even a direction towards the solution is highly appreciated especially in java. Thanks in anticipation
works absolutely fine with a significant contrasting background like this
Detected 4 corners
This picture gives troubles because the background isn't exactly the most contrasting
Initial largest contour found
Update: median blur did not help much so I traced the cause and found that the page boundary was detected in bits and pieces and not a single contour so it detected the biggest contour as a part of the page boundary Therefore performed some morphological operations to close relatively small gaps and the resultant largest contour is definitely improved but its its not optimum. Any ideas how I can improve the big gaps?
morphed original picture
largest contour found in the morphed image
PS morphing the image in ideal scenarios has led to detection of false contour boundaries. Any condition which can be checked before morphing an image is also a bonus. Thank you
If you use methods like that:
public static RotatedRect getBestRectByArea(List<RotatedRect> boundingRects) {
RotatedRect bestRect = null;
if (boundingRects.size() >= 1) {
RotatedRect boundingRect;
Point[] vertices = new Point[4];
Rect rect;
double maxArea;
int ixMaxArea = 0;
// find best rect by area
boundingRect = boundingRects.get(ixMaxArea);
boundingRect.points(vertices);
rect = Imgproc.boundingRect(new MatOfPoint(vertices));
maxArea = rect.area();
for (int ix = 1; ix < boundingRects.size(); ix++) {
boundingRect = boundingRects.get(ix);
boundingRect.points(vertices);
rect = Imgproc.boundingRect(new MatOfPoint(vertices));
if (rect.area() > maxArea) {
maxArea = rect.area();
ixMaxArea = ix;
}
}
bestRect = boundingRects.get(ixMaxArea);
}
return bestRect;
}
private static Bitmap findROI(Bitmap sourceBitmap) {
Bitmap roiBitmap = Bitmap.createBitmap(sourceBitmap.getWidth(), sourceBitmap.getHeight(), Bitmap.Config.ARGB_8888);
Mat sourceMat = new Mat(sourceBitmap.getWidth(), sourceBitmap.getHeight(), CV_8UC3);
Utils.bitmapToMat(sourceBitmap, sourceMat);
final Mat mat = new Mat();
sourceMat.copyTo(mat);
Imgproc.cvtColor(mat, mat, Imgproc.COLOR_RGB2GRAY);
Imgproc.threshold(mat, mat, 146, 250, Imgproc.THRESH_BINARY);
// find contours
List<MatOfPoint> contours = new ArrayList<>();
List<RotatedRect> boundingRects = new ArrayList<>();
Imgproc.findContours(mat, contours, new Mat(), Imgproc.RETR_LIST, Imgproc.CHAIN_APPROX_SIMPLE);
// find appropriate bounding rectangles
for (MatOfPoint contour : contours) {
MatOfPoint2f areaPoints = new MatOfPoint2f(contour.toArray());
RotatedRect boundingRect = Imgproc.minAreaRect(areaPoints);
boundingRects.add(boundingRect);
}
RotatedRect documentRect = getBestRectByArea(boundingRects);
if (documentRect != null) {
Point rect_points[] = new Point[4];
documentRect.points(rect_points);
for (int i = 0; i < 4; ++i) {
Imgproc.line(sourceMat, rect_points[i], rect_points[(i + 1) % 4], ROI_COLOR, ROI_WIDTH);
}
}
Utils.matToBitmap(sourceMat, roiBitmap);
return roiBitmap;
}
you can achieve for your source images results like this:
or that:
If you adjust threshold values and apply filters you can achieve even better results.
You can pick a single contour by using one or both of:
Use BoundingRect and ContourArea to evaluate the squareness of each contour. boundingRect() returns orthogonal rects., to handle arbitrary rotation better use minAreaRect() which returns optimally rotated ones.
Use Cv.ApproxPoly iteratively to reduce to a 4 sided shape
var approxIter = 1;
while (true)
{
var approxCurve = Cv.ApproxPoly(largestContour, 0, null, ApproxPolyMethod.DP, approxIter, true);
var approxCurvePointsTmp = new[] { approxCurve.Select(p => new CvPoint2D32f((int)p.Value.X, (int)p.Value.Y)).ToArray() }.ToArray();
if (approxCurvePointsTmp[0].Length == 4)
{
corners = approxCurvePointsTmp[0];
break;
}
else if (approxCurvePointsTmp[0].Length < 4) throw new InvalidOperationException("Failed to decimate corner points");
approxIter++;
}
However neither of these will help if the contour detection gives you two separate contours due to noise / contrast.
I think it would be possible to use the hough line transformation to help detect cases where a line has been split into two contours.
If so the search could be repeated for all combinations of joined contours to see if a bigger / more rectangular match is found.
Stop relying on edge detection, the worst methodology in the universe, and switch to some form of image segmentation.
The paper is white, the background is contrasted, this is the information that you should use.
I am fairly new to openCV libraries and I am trying to do real time object detection for a school project on an android app. followed this tutorial (https://www.youtube.com/watch?v=bSeFrPrqZ2A) and I am able to detect object by color on my android phone. Now I am trying to map out the trajectory of the object just like in this video (https://www.youtube.com/watch?v=QTYSRZD4vyI).
Following is some of the source code provided in the first youtube video.
void searchForMovement(int& x, int& y, Mat& mRgb1, Mat& threshold){
morphOps(threshold);
Mat temp;
threshold.copyTo(temp);
//these two vectors needed for output of findContours
vector< vector<Point> > contours;
vector<Vec4i> hierarchy;
//find contours of filtered image using openCV findContours function
//In OpenCV, finding contours is like finding white object from black background.
// So remember, object to be found should be white and background should be black.
//CV_CHAIN_APPROX_SIMPLE to draw 4 points of the contour
findContours(temp,contours,hierarchy,CV_RETR_CCOMP,CV_CHAIN_APPROX_SIMPLE );
double refArea = 0;
bool objectFound = false;
if (hierarchy.size() > 0) {
int numObjects = hierarchy.size();
//if number of objects greater than MAX_NUM_OBJECTS we have a noisy filter
if(numObjects<MAX_NUM_OBJECTS){
for (int index = 0; index >= 0; index = hierarchy[index][0]) {
Moments moment = moments((cv::Mat)contours[index]);
double area = moment.m00;
//if the area is less than 20 px by 20px then it is probably just noise
//if the area is the same as the 3/2 of the image size, probably just a bad filter
//we only want the object with the largest area so we safe a reference area each
//iteration and compare it to the area in the next iteration.
if(area>MIN_OBJECT_AREA && area<MAX_OBJECT_AREA && area>refArea){
x = moment.m10/area;
y = moment.m01/area;
objectFound = true;
refArea = area;
}else objectFound = false;
}
//let user know you found an object
if(objectFound ==true){
putText(mRgb1,"Tracking Object",Point(0,50),2,1,Scalar(0,255,0),2);
//draw object location on screen
drawObject(x,y,mRgb1);}
}else putText(mRgb1,"TOO MUCH NOISE! ADJUST FILTER",Point(0,50),1,2,Scalar(0,0,255),2);
}
}
void drawObject(int x, int y,Mat &frame){
Mat traj;
traj = frame;
//use some of the openCV drawing functions to draw crosshairs
//on your tracked image!
//UPDATE:JUNE 18TH, 2013
//added 'if' and 'else' statements to prevent
//memory errors from writing off the screen (ie. (-25,-25) is not within the window!)
circle(frame,Point(x,y),20,Scalar(0,255,0),2);
if(y-25>0)
line(frame,Point(x,y),Point(x,y-25),Scalar(0,255,0),2);
else line(traj,Point(x,y),Point(x,0),Scalar(0,255,0),2);
if(y+25<FRAME_HEIGHT)
line(frame,Point(x,y),Point(x,y+25),Scalar(0,255,0),2);
else line(frame,Point(x,y),Point(x,FRAME_HEIGHT),Scalar(0,255,0),2);
if(x-25>0)
line(traj,Point(x,y),Point(x-25,y),Scalar(0,255,0),2);
else line(frame,Point(x,y),Point(0,y),Scalar(0,255,0),2);
if(x+25<FRAME_WIDTH)
line(frame,Point(x,y),Point(x+25,y),Scalar(0,255,0),2);
else line(frame,Point(x,y),Point(FRAME_WIDTH,y),Scalar(0,255,0),2);
// add(traj, frame, frame);
putText(frame,intToString(x)+","+intToString(y),Point(x,y+30),1,1,Scalar(0,255,0),2);
}
How can I add onto this code to get the trajectory of an object showed in the 2nd video? Any suggestion would be much appreciated. Thank you.
http://opencv-srf.blogspot.co.uk/2010/09/object-detection-using-color-seperation.html
Found it. When doing it in android, need to make sure the lastX and lastY are updating as well.
We have been dealing with OpenCV for two weeks to make it work on Android.
Do you know where can we find an Android implementation of optical flow? It would be nice if it's implemented using OpenCV.
Openframeworks has openCV baked in, as well as many other interesting libraries. It has a very elegant strucutre, and I have used it with android to make a virtual mouse of the phone using motion estimation from the camera.
See the ports to android here http://openframeworks.cc/setup/android-studio/
Seems they recently added support for android studio, otherwise eclipse works great.
Try this
#Override
public Mat onCameraFrame(CvCameraViewFrame inputFrame) {
mRgba = inputFrame.rgba();
if (mMOP2fptsPrev.rows() == 0) {
//Log.d("Baz", "First time opflow");
// first time through the loop so we need prev and this mats
// plus prev points
// get this mat
Imgproc.cvtColor(mRgba, matOpFlowThis, Imgproc.COLOR_RGBA2GRAY);
// copy that to prev mat
matOpFlowThis.copyTo(matOpFlowPrev);
// get prev corners
Imgproc.goodFeaturesToTrack(matOpFlowPrev, MOPcorners, iGFFTMax, 0.05, 20);
mMOP2fptsPrev.fromArray(MOPcorners.toArray());
// get safe copy of this corners
mMOP2fptsPrev.copyTo(mMOP2fptsSafe);
}
else
{
//Log.d("Baz", "Opflow");
// we've been through before so
// this mat is valid. Copy it to prev mat
matOpFlowThis.copyTo(matOpFlowPrev);
// get this mat
Imgproc.cvtColor(mRgba, matOpFlowThis, Imgproc.COLOR_RGBA2GRAY);
// get the corners for this mat
Imgproc.goodFeaturesToTrack(matOpFlowThis, MOPcorners, iGFFTMax, 0.05, 20);
mMOP2fptsThis.fromArray(MOPcorners.toArray());
// retrieve the corners from the prev mat
// (saves calculating them again)
mMOP2fptsSafe.copyTo(mMOP2fptsPrev);
// and save this corners for next time through
mMOP2fptsThis.copyTo(mMOP2fptsSafe);
}
/*
Parameters:
prevImg first 8-bit input image
nextImg second input image
prevPts vector of 2D points for which the flow needs to be found; point coordinates must be single-precision floating-point numbers.
nextPts output vector of 2D points (with single-precision floating-point coordinates) containing the calculated new positions of input features in the second image; when OPTFLOW_USE_INITIAL_FLOW flag is passed, the vector must have the same size as in the input.
status output status vector (of unsigned chars); each element of the vector is set to 1 if the flow for the corresponding features has been found, otherwise, it is set to 0.
err output vector of errors; each element of the vector is set to an error for the corresponding feature, type of the error measure can be set in flags parameter; if the flow wasn't found then the error is not defined (use the status parameter to find such cases).
*/
Video.calcOpticalFlowPyrLK(matOpFlowPrev, matOpFlowThis, mMOP2fptsPrev, mMOP2fptsThis, mMOBStatus, mMOFerr);
cornersPrev = mMOP2fptsPrev.toList();
cornersThis = mMOP2fptsThis.toList();
byteStatus = mMOBStatus.toList();
y = byteStatus.size() - 1;
for (x = 0; x < y; x++) {
if (byteStatus.get(x) == 1) {
pt = cornersThis.get(x);
pt2 = cornersPrev.get(x);
Core.circle(mRgba, pt, 5, colorRed, iLineThickness - 1);
Core.line(mRgba, pt, pt2, colorRed, iLineThickness);
}
}
return mRgba;
}