I want to start write apps for android with Visual Studio. I used default emulator (Cordova),but it is too slow. So I find Genymotion, which is faster than Codova. However I can't connect Genymotion to Visual Studio, because Visual Studio use Cordova and I can't choose genymotion device in device list. So anyone know how to fix it.
PS Really sorry to my terrible english language.
I have the same setup, and my Visual Studio deployments were failing with no error, just failing to deploy to my GenyMotion Android.
So I discovered that there is a setting in GenyMotion (Settings -> ADB -> Use custom Android SDK) which MUST be the same as the SDK you are using in Visual Studio (Tools -> Options -> Xamarin Settings -> Android Settings -> Android SDK Location).
Once I changed this, it all "just worked"! And deployed super quick!!!
No, for the moment Genymotion don't have an official plugin for Visual Studio, but you can open a device in Genymotion (like normally we does) and in Visual Studio choose the option "Device" for to run your project (for default the option is "Ripple - Nexus (Galaxy)") and press Ctrl+f5, with this way Visual Studio detect the device open with Genymotion and run your application.
Guy was the same situation. I read an interesting way in this site Front In Brazil
Only start the emulator in GenyMotion and then run the command: ionic run android and be happy.
Note: My English is worse.
Related
I have been trying to install Xamarin for the first time. I have it installed and i have the first dummy project open. I haven't made any changes to it i am just trying to run it. (F5)
The first thing i am getting is
I click the learn more which brings me to Hardware Acceleration for Emulator Performance (Hyper-V & HAXM)
Hyper-v is enabled via bios on this machine i know this becomes i also have docker on this machine which runs just fine using hyper-v. I ran though all the settings in this webpage and it doesnt seam to fix the problem.
I searched the whole page i cant find anything about what windows spring creators update (Redstone 4) is.
If i go though Tools -> Android -> Android device manager. I get the following screen.
The here link brings me to the same place as before. (Hyper-V & HAXM)](https://learn.microsoft.com/en-us/xamarin/android/get-started/installation/android-emulator/hardware-acceleration?tabs=vswin)
If i try and run anyway the emulator starts but its not starting with the project.
SystemInfo
Hyper-V Requirements: A hypervisor has been detected. Features required for Hyper-V will not be displayed.
Hyper-v is running Docker has been using it for months. Yes i disable docker when running this project.
winver
Windows version says Version 1803 (OS build 17134.228) .
Visual studio version
Visual studio 15.8.2
Tools > Android > Android SDK Manager in Visual Studio.
Android emulator is at 27.3.9 Android SDK tools is at 26.1.1
What am i doing wrong how do you run an android project using Xamarin.
How to start Xamarin emulator first time (Redstone 4)
If you want to use Hyper-V to accelerate your Android Emulator, you needs verifying support for Hyper-V:
Verify that your Windows Version is at least 1803
Enable windows features
Install Visual Studio 15.8 or later
Install the Android Emulator package 27.2.7 or later
Make sure you have enabled the Virtualization Technology on your device. You could find it via:
Task Manager -> Performance -> Virtualization -> Enable or Disable.
I am using windows 10 home and visual studio 2017. I want to develop android apps with xamarin. Hyper-V feature is not available on windows 10 home and I can not afford pro version, So emulator is not installing without hyper-v.
What should I do to develop android app?
Have anybody idea to deploy android app without using emulator and hyper-v?
Thank you in advance!
It's possible to develop Xamarin app without using the emulators. But in that case you'll need to have an Android device to deploy your app on.
Setup Android SDK Manager on your system. Although Xamarin includes a
SDK Manager, you can download it from the following link. Android SDK Manager download
Setup the ADB (Android Debug Bridge) on your system (install Google USB Drivers)
Connect your Android device to the system after you enable USB Debugging(Developer options) on it. Once the device is connected it will give you a prompt to enable debugging. Tap yes and you'll see the option to build to your device as shown in image.
You can try to use any avaliable on windows android emulator. I like to use Bluestack (https://www.bluestacks.com), the steps for use it below:
Install Bluestacks emulator
Launch emulator and wait for load finished
It's your wellcome screen, your application and apps from store will be here
Go to settings > Preferences and check "Enable android debug bridge (ADB)" + "Enable Android input debugging"
One time Setup finished
"Open android adb command promt" and type
adb connect 127.0.0.1:5555
If you have done everything good you will be connected to emulator and ready to debug your application
Good luck!
UPDATE:
As of visual studio 2019, non-hyper v emulation has been stopped.
Old Answer
I am very positive that at the time of VS installation the Visual studio emulators for Android are readily available for download and use, there you can find a good amount of android emulators also it provides you with Android SDK which again can be used to create Android emulators without using Hyper-V
The below link contains all you need to know about Visual studio emulators including on how to install :
https://msdn.microsoft.com/en-us/library/mt228279.aspx
Hope this Answers your question.
Goodluck!
I'm currently using Genymotion with Android Studio via the Genymotion plugin to try to test and debug my Android applications. I set up the Android Studio Genymotion plugin a while ago, and it worked. However, just now I tried to deploy my application to Genymotion, but after starting my Genymotion device, it did not appear in the ADB deployment list. I have no idea what happened or why. Does anyone have any idea?
By the way, this means I cannot test my application, as I cannot use the regular ADB virtual device set as per this other continuing issue: How to create an Android AVD without HAXM?
Thanks!
It is potentially an incompatibility problem between the adb shipped with Genymotion and the one from your Android SDK.
Turn all your Genymotion devices off.
Then open Genymotion application (not the IDE plugin), go to settings > adb tab > check "use custom adb" and set the path to yout Android SDK.
Then reopen a device and you should see it on your IDE.
I'm using visual studio 2015 update 1 with windows 10 build 10586 TH1.
also I'm using Xamarin Version 4.0.1.96.
I have created a blank Xamarin.Forms app. It deploys to Windows Phone emulators without any issue. But unable to deploy to Android Emulators.
When I start android project Android Emulator launched successfully but visual studio freeze at this step.
I've tried a lot of android emulator profiles but cannot solve the problem.
This problem only exists for Emulators and project successfully deployed on physical android device.
I have the same issue with Xamarin.Android projects.
Here is all of the text in output window:
1>Starting deploy 4.5" KitKat (4.4) HDPI Phone ...
1>Starting emulator 4.5" KitKat (4.4) HDPI Phone ...
1>Validating emulator arguments...
1>Determining if emulator is already running...
1>Preparing virtual machine...
1>Launching emulator...
1>Emulator launched successfully
Thank you in advance for your help.
I was running into the same issue with the emulator starting up find but Visual Studio getting hung on the build/deploy. Finally figured it out from here.
Visual Studio gets stuck trying to deploy the app to the emulator or the emulator does not appear as a debug target in other IDEs
If the emulator is running, but it does not appear to be connected to
ADB (Android Debug Bridge) or it does not appear in Android tools that
make use of ADB (for example, Android Studio or Eclipse), you may need
to adjust where the emulator looks for ADB. The emulator uses a
registry key to identify the base location of your Android SDK, and
looks for the \platform-tools\adb.exe file under that directory. To
modify the Android SDK path used by the emulator:
Open Registry Editor by selecting Run from the Start buttons context menu, typing regedit in the dialog box, and choosing OK.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Android SDK Tools in the folder tree on the left.
Modify the Path registry variable to match the path to your Android SDK. Restart the emulator and you should now be able to see the
emulator connected to ADB and associated Android tools.
The value in my registry was set to "C:\Program Files (x86)\Android\android_sdk" (or similar). Updating it to "C:\Users\{USERNAME}\AppData\Local\Xamarin\MonoForAndroid\AndroidSDK" solved it for me. (I haven't yet worried about how to make this work for all users.)
I had the same issue but in my case it was not the registry. After doing a release build, I deployed the app to the emulator device in release mode which pushes the app to the device and then effectively "disconnects". These leaves a version of the app on the device which seems to block further attempts at debugging.
I solved it by starting the emulator, going to "settings -> apps" and manually uninstalling my app. Then the next debug build & deploy worked again.
I had the same issue. After a long struggle i fixed it.
Sol 1 :
Check with the registry as mentioned by others.
**HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Android SDK Tools**
Sol 2 :
In my case there is no android-SDK tool found in registry. So you have to add the registry manually here "**HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node**"
you can add it by right click on **Wow6432Node** => **New** => **key**.
Set Key name as **"Android SDK Tools"**then right click on **Android SDK Tools** =>**New** => **String Value**
Set Name as **Path** for newly added string. Then right click on **Path** => **Modify..**
Copy the Android SDK Tools path from program files and paste in Value Data.
Now the registry is created manually. You can debug the project via emulator.
Note : Don't forgot to restart the system.
Have a look here:
Xamarin Forms Android App Crashes Running Debug with VS Android Emulator
Start the Hyper-V manager
Select the emulator you are trying to use
Right-click, hit settings
Click processor
Click Compatibility
Set checkbox “Migrate to a physical computer with a different processor version”
You do not have this issue on a laptop because its processor does not provide the new features which are unsupported by the Android Emulator for Visual Studio. The described tweak is only needed on PCs with newer CPUs.
I got round this problem by starting Visual Studio as an administrator.
I too have had weirdness with the Visual Studio Emulator for Android and visual studio appearing to be stuck at the "Deploying ..." step trying to launch the app for debugging.
What I discovered is that restarting both the emulator and visual studio seems to make things better for me once it starts to do this.
Also, when debugging an app, it seems that exiting your app normally helps compared to when using the "Stop Debugging" button.
For example, I started my app twice and killed it w/ the "Stop Debugging" button, but couldn't deploy/start the app a 3rd time w/out a restart of visual studio and the emulator.
Am using VS 2015 Community edition w/ update 3.
I just had a very interesting experience,
In my case the registry path to SDK was correct,
I had unchecked the "Use Fast Deployment" (under packaging properties in android options), and
all my efforts to reboot the PC, close VS, Close Emulator start over had failed.
However I did these two:
1 - Updated all the components in android SDK manager and restarted the PC,
2 - Disabled my anti-virus! and then suddenly VS deployed the app to the emulator!! (It was stuck in the same situation where the emulator starts and nothing happens!, I did this out of despair!)
(OS: win 7, professional, VS 2017 Community edition!)
More Details
I have been trying this for three more days
For my special case disabling the Anti Virus seems to solve the issue every single time!
The solution for me was to Check the deploy box in the Configuration Manager
This answer came from Xamarin Forum
I recently got into Xamarin development. I have a lot of experience in Xcode making iOS apps and the iOS side was very straight forward. Now I'm trying to implement Android. I downloaded a Hello World example to get my bearings. When I run it I have no problems getting the simulator to show up (MonoForAndroid_API_10 and MonoForAndroid_API_12) but the actual application doesn't run, and does not show up anywhere on the simulator. Essentially whenever I use run or run with in Xamarin on Android, it pulls up a fully functioning, albeit empty simulator.
How do I get my application to run on the emulator?
Like the other commenters, this is most likely just a symptom of slow emulator on your machine. I'm running Xamarin-Android development on my 2010-era OSX machine in mavericks with 8GB RAM, and it is slow-slow-slow, but usable. Try to find the Intel x86 speeds improvements (look for HAXM) and you will find that the emulator will be much much faster.
And yeah, get a real handset and plug it in to your computer: always much faster than emulation.
later edit Get Genymotion for Mac OSX or for PC/Windows or PC/Linux. It's way way way faster than the other emulators. I have since found that this is as fast, or faster, than running the App on my connected Android phone. It's certainly simpler in not having to have the device plugged into one of my USB ports, and allows me to code and test on the train. http://www.genymotion.com/
Don't know if my issue was the same but finally this troubleshooting helped me to run emulator https://msdn.microsoft.com/en-us/library/mt228282.aspx#ADB.
I was missing key Android SDK Tools with string value Path in registry Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node
I've created it manually and it worked.
UPDATE
Before I got the issue with running emulator, I couldn't see it in Visual Studio. The reason was I've installed VS Android Emulator through standalone installation, not through VS Installer. It had to be installed there as well.
I had the similar issue, and then I deleted the existing device simulator and reinstalled again and it started working.
As I use a different SDK, in my case
Go to Tools > Options > Xamarin and set the Android SDK path.
Sometime Visual Studio changes this configuration;
2020 Update:
I followed the most voted comment, however, with Visual Studio 2019 updated recently, the steps have changed a little. Here is what previously worked:
WHAT WORKED BEFORE
"Don't know if my issue was the same but finally this troubleshooting helped me to run emulator https://msdn.microsoft.com/en-us/library/mt228282.aspx#ADB. I was missing key Android SDK Tools with string value Path in registry Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node
I've created it manually and it worked."
WHAT TO DO INSTEAD
Nothing. Don't mess with the path.
WHAT WORKED BEFORE
"Before I got the issue with running emulator, I couldn't see it in Visual Studio. The reason was I've installed VS Android Emulator through standalone installation, not through VS Installer. It had to be installed there as well."
Previous instructions image
WHAT TO DO INSTEAD
a. Go to Tools located at the top of the VS window, Get Tools and Features, go to Individual components, using the search tool in the pop up box, search "emulator", once you get the result, make sure both Google Android Emulator (API Level 25)(local install) and Intel Hardware Accelerated Execution Manager (HAXM) (local install) are both checked.
b. Close the solution(s) and restart VS then reopen the solution(s).
c. To deploy the app on the emulator, click Start button to spin up the emulator, left click on your Android project, then click Deploy. You should be able to see your app on your emulator's app menu.
Updated Instructions image
Worked for ME
Sometimes you close the android Emulator but not POWEROFF the Emulator.
this problem happens when emulator shutdown un-properly.
Restart Your EMULATOR
First start your emulator
Then restart your emulator by pressing down the power button and select restart option in your android emulator.
I enabled Hyper-V acceleration based on microsoft documentations: https://learn.microsoft.com/en-us/xamarin/android/get-started/installation/android-emulator/hardware-acceleration?tabs=vswin&pivots=windows#accelerating-with-hyper-v
Basically you need to turn on these two windows features from the control panel (Turn windows features on of off):
Hyper-V.
Windows hypervisor platform.
then from visual studio go to: Tools >> Android >> Android SDK manager >> Tools >> make sure that "Android emulator" version is 27.0.1 or higher, if not, you will find in the same screen a button below to update it.
I did this on windows 10 64-bit, with VS 2017 Community 15.9.5