I have 2 android devices
I need one of them to automatically get the other device's data (battery strength , signal , contact list , etc.. ) after they bind
is there a way to do that?
Yes you can do it but for this purpose you have to write the code as Stub-Skeleton (Client - Server) where one listens and one processes.
Let me know if you have any other question.
Latest android mobile devices provide Wifi Direct feature i believe it will be bit more faster than the blue tooth.
P.S: Both Bluetooth 4.0 and Wi-Fi Direct use the 802.11 networking standard to reach their maximum speeds. but bluetooth 4 device-to-device transfer speeds of up to 25mbps while wifi direct promises till 250mpbs. Choice is yours;
Happy Coding !
Related
I am developing an p2p application in android for an educational project in which I want to form groups android phones of students nearby and exchange sensor data in a university campus.
Now there are some considerations :
Devices will automatically discover each other and upon discovering connect and exchange data.
The process runs for a long time maybe 4-8 hours per day. (process of periodically sensing data and exchanging )
Now the p2p groups can be formed using either Bluetooth or WiFi (Not WiFi Direct, simple UDP packets over WiFi considering phones are connected on campus WiFi).
What are pros and cons of using Bluetooth and WiFi in this scenario in terms of reliability, power usage of phones, scalability and any other you can suggest.
Among other answers and input, I would added this answer.
First of all, before we chose WiFi or Bluetooth we need to find out the difference between those two technologies.
I have made comparison chart that covers some of the important information you might need regarding your project.
Note: There are different versions of Bluetooth's and WiFi, this chart is to represent the the general picture of Standard Bluetooth,
Bluetooth v4 and WiFi. It is always suggested to refer to manufacture
specification of each technology.
From the chart we can conclude that Bluetooth has lower power consumption vs WiFi, but at the other hand WiFi has more bandwidth than Bluetooth.
Range in general is just approximation, a lot of things affecting range like human body, obstacles, location (inside or outside), if inside; structure type and materials used inside the building, noise from other sources and devices etc.
(*) Regarding scalability, I have tested WiFi and Bluetooth v4, both system with up to 8 devices, where one of those is host (group owner, server) device and 7 others are guest (clients). see the figure below.
What regards reliability, with Bluetooth v4 I have had some time connectivity problems, but when it works than every-thing is fine.
Note: Bluetooth v4 is not back compatible with older versions of Bluetooth, so if your host is Bluetooth v4 than all other clients
should have Bluetooth v4 or vice versa.
So I will not say which one is best, but if you need longer battery life and light data communication than Bluetooth is the way. Regardless if it is Bluetooth OR WiFi you might need to start with Bluetooth to and test it, if you are happy with it than keep it, otherwise switch to WiFi.
In case you want to build your own code, the code example I followed and used previously for another university research project. It is based on 8 phones (host and client) as seen in the figure above, we collected sensor information and send it to host phone using Bluetooth 4 connection. The source code we used for that can be found here. The same project has WiFi and other type of connections.
Android official google documentation has some information and code example regarding WiFi peer to peer connection, you can follow with example of the code as well.
Regarding collecting your sensor data and sending those to one device. You could added a method that starts collecting sensor or what ever data, and after connection is established successfully than start sending it over to the other device.
As others suggest https://developers.google.com/nearby is also a way to go.
As you can rely on campus Wifi, I would definitely go with the implementation of Google Nearby APIs in my App as it was designed for such use cases...
The way it works answers your question : it makes all the heavy stuff for you, including choice between wifi or Bluetooth for better performance...
Google Nearby is definitely a good choice. You don't have to tackle all the problems when working with WiFi or Bluetooth directly. But Google Nearby only works when both devices are online and have their screens on. For a more critical review of Nearby have a look at http://blog.p2pkit.io/how-google-nearby-really-works-and-what-else-it-does
If you can not accept these limitations, you should look into other frameworks like http://www.p2pkit.io.
Disclaimer: I work for Uepaa, developing p2pkit for Android and iOS.
I wanted to know if WiFi P2P android API is ideal for use if we take lot of connections into consideration, tha app's users can be at time clients and servers they can share files and send messages and get them also as clients ? if no what is the best solution ( N.B : i'm opened to client/server architecture ).
I just wanted to know the limits of the API cited above and Thank you guys ...
Wifi direct as a technology is ideal for peer to peer communication.However talking about wifi direct for android , it works well only for a single connection that is only 1-1 use case .It is possible to create a one to many where every device connects to the group owner (Soft AP).But even if u build a one to one and try extend to multi use case you will have problems with certain devices that do no connect perfectly.
Checkout some of the problems listed under problems after downloading this application https://play.google.com/store/apps/details?id=com.budius.WiFiShoot&hl=en
If you want to go for multiple connection it is better to use hotspot .One device ends up being the hotspot and other clients connect to the hotspot .It is being used by plenty of application like xender, zapiya.
This question follows on from Unity3D -- Send message to other mobile phones in the same vicinity
However, I made mistake of restricting to Unity3D.
So I would like to re-ask the question without that constraint.
Let us say we have 20 mobile phone users in a cave (so no Wi-Fi networks / isGPS)
One user hits a button, and every other user's screen flashes, (within a few milliseconds)
How to accomplish this?
What if everyone is using an iPhone?
What if there is a mix of iPhone and android users?
Finally, is there any solution that would cover a wider range of phones?
You should have some network so that mobiles can share some data. Bluetooth can have maximum of 10 m distance coverage (depends upon devices though). Since, all mobile are running same app they should be linked to a network and communicate. Please Check:
http://developer.android.com/samples/BluetoothLeGatt/index.html
You can create one device as server and communicate among other devices.
https://github.com/polyclef/BluetoothChatMulti
If you have installed the app on all of the devices then in all probability yes, if the device supports push (pretty much any smartphone) then you can use the push service to synchronize the devices based on geofencing (ie, 10m from my location), there are some other discovery routes you could try to (without using the B word) pinging other devices
the app would need to be able to provide some sort of server service if it was to create its own private network based on the IP addresses of the devices it found nearby, as those devices would have to connect to that phone acting as a server. the network interface shouldn't be important, but connecting the satellite devices to the server should be. You could try doing it based on which device can provide data services, aka hotspot. You can easily connect devices to networks programmatically.
at that point your faced with the classic client server problem. There is going to be a huge amount of work to get devices configured, network creation, client server infrastructure if it has to be done without data, packet optimization. Very expensive and very high risk depending on how many restrictions there are.
Search for How to make a html5 group chat and then build on that example.
Possibly send commands to the chat delimited by a / character where a javascript could then execute the command.
Good Luck with your design.
Danny117
What is the best way for an Android app installed on two devices to communicate with each other? Can the devices connect directly without using text messaging?
You have several options, depending on your requirements and setup:
If your devices are very close to one another (up to about 10 meters), you can communicate using Bluetooth, as Derek suggested.
If your devices are somewhat further away, but within WiFi range of each other (up to about 100 meters), then they can communicate with each other using the Peer-to-Peer WiFi API, documented here (part of the Android Wireless API). This does not require a WiFi router to be present, and the devices will find each other and communicate directly. This does however require Android 4.1 or higher.
The Android Wireless API will also work if your devices are on the same local network (i.e., use the same WiFi router), even if they are not themselves within range of each other.
If none of these options are viable/guaranteed, then I agree with Derek that the easiest way would be to use ServerSocket and Socket to create a server/client interface through the Internet. Here is a sample application doing that. The main problem you might encounter is that if the server is sitting behind a NAT (such as a home internet router), you will have to configure the NAT to forward the incoming packets to your Android server.
You can connect them via bluetooth using BluetoothSockets. Android developer website has pretty good documentation on this.
http://developer.android.com/guide/topics/wireless/bluetooth.html
Or if you'd rather (and have internet on both devices), you can use regular Socket's.
http://developer.android.com/reference/java/net/ServerSocket.html for server side
http://developer.android.com/reference/java/net/Socket.html for client side
If you have a large amount of data to transfer, internet sockets have a greater data capacity and will be faster. The other advantage is that there is no such thing as "out of range". You can connect the two devices wherever internet is available, whereas with bluetooth they have to be within bluetooth range of each other
you can use PubNub. it handles all networking and you should only care about messages.
it has great API to work.
(Thanks to #Ian Jennings : Can we send data from an android device to another android device directly (p2p) without server in the middle?)
Depends on what you are doing. If you have a server, you may be able to send some message to it and have it pulled by the other device (assuming both clients have the app installed). I think this would be the most intuitive way (but it really depends on what you are communicating).
Text messaging and email might work, but you (or the user) needs to know the numbers/emails associated with a device to do that.
you should have a look at WifiDirect
Wi-Fi peer-to-peer (P2P) allows Android 4.0 (API level 14) or later
devices with the appropriate hardware to connect directly to each
other via Wi-Fi without an intermediate access point.
As was already suggested, sockets are the easiest way to accomplish this if your devices are all connected to a network.
There are things to accomplish here:
Use Network Service Discovery to find devices running your app
Connect to other instances of your app using a socket
For a complete tutorial you can check this out
ShortAnswer: Yes
Data can be sent directly.
In order of range:
1 Bluetooth
2 wifidirect
3 maybe.. GSM hardware direct?
After that, options again in range order:
4 tether or network
5 Internet
The android NSD API is meant to do the exact same thing you are trying to achieve! The example bundled with SDK is self explanatory!
please check:
Android NSD API example
I need a way to send messages between 2 android devices, 1 a phone and 1 a tablet. I'm using Java to create the app. I'm looking at servers but I can't figure out where to start. Thanks for any help :-)
P.s. Both devices would be using the same wifi connection so could I use a port to send messages
Beside the obvious solution from #dilix you could use a library like JGroups which provides automatic discovery of other devices.
The answer depends on how far away the devices are. Right next to each other (inches)? NFC. Within about 20 feet? Bluetooth. Within a hundred meters or so? Wifi Direct, which is peer to peer wireless connections. More than that? You're going to need a central server, because no carrier allows incoming TCP or UDP data- they all firewall it off. Of course all of the longer distance answers will also work for shorter distances. But different solutions here also have different security requirements.
I think you can try sockets to send\receive messages:
http://developer.android.com/reference/java/net/ServerSocket.html
http://developer.android.com/reference/java/net/Socket.html
Try to searh "android socket" and you can find some information even on the stackoverflow.