Develop Reference

Will cmake compiled TFLite work on android?

I'm making a project with 2 variations, a desktop version and an android version. Both of them are using the same c++ code base. I want to use TFLite without getting into any android configuration like gradle or an aar file. I just want a pure .so file that my c++ can use thus android can through ndk. I know there are some complications like ndk using clang and requiring arm64 architecture, but I think it should be possible. Note that my project requires ndk version 22 and above.
Here is how I configured tflite for my desktop/debian project:
On ~/Desktop/ I ran git clone https://github.com/tensorflow/tensorflow.git tensorflow_src
mkdir tflite_build & cd ~/Desktop/tflite_build
cmake ../tensorflow_src/tensorflow/lite
cmake --build . I've removed the -J flag regardless of what the docs says because it causes my pc to freeze.
mkdir ~/Desktop/tf_test & cd ~/Desktop/tf_test
Create a CMakeLists.txt and a main.cpp file inside tf_testdirectory.
Put the main code from the minimal example on the github repo provided above then this code in CMake:
cmake_minimum_required(VERSION 3.16)
project(minimal C CXX)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DTFLITE_DISABLE_TELEMETRY=1")
set(TENSORFLOW_SOURCE_DIR "" CACHE PATH
"Directory that contains the TensorFlow project" )
if(NOT TENSORFLOW_SOURCE_DIR)
get_filename_component(TENSORFLOW_SOURCE_DIR
"/home/user/Desktop/tensorflow_src" ABSOLUTE)
endif()
add_subdirectory(
"${TENSORFLOW_SOURCE_DIR}/tensorflow/lite"
"${CMAKE_CURRENT_BINARY_DIR}/tensorflow-lite" EXCLUDE_FROM_ALL)
add_executable(minimal minimal.cc)
target_link_libraries(minimal tensorflow-lite)
Created the folder tf_Test/build and ran cmake .. inside it.
After cmake is completed I run make inside the build directory
This works just fine on debian. However when I try to add this to my cmake on my android ndk project, connect my tablet and run the project I get all these errors:
...
- Looking for strtoull_l - found
-- Using toolchain file: /home/user/Android/Sdk/ndk/25.0.8775105/build/cmake/android.toolchain.cmake.
-- CMAKE_CXX_FLAGS: -g -DANDROID -fdata-sections -ffunction-sections -funwind-tables -fstack-protector-strong -no-canonical-prefixes -D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -frtti -fexceptions -fvisibility=hidden -std=c++17 -O0 -Wall -Wextra -Wshadow -Wnon-virtual-dtor -pthread -frtti -fexceptions
-- Found Python3: /usr/bin/python3.9 (found suitable version "3.9.2", minimum required is "3.5") found components: Interpreter
-- Downloading pthreadpool to /home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/pthreadpool-source (define PTHREADPOOL_SOURCE_DIR to avoid it)
-- Configuring incomplete, errors occurred!
See also "/home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/pthreadpool-download/CMakeFiles/CMakeOutput.log".
-- The ASM compiler identification is Clang with GNU-like command-line
-- Found assembler: /home/user/Android/Sdk/ndk/25.0.8775105/toolchains/llvm/prebuilt/linux-x86_64/bin/clang
-- Downloading FP16 to /home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/FP16-source (define FP16_SOURCE_DIR to avoid it)
-- Configuring incomplete, errors occurred!
See also "/home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/FP16-download/CMakeFiles/CMakeOutput.log".
-- Downloading FXdiv to /home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/FXdiv-source (define FXDIV_SOURCE_DIR to avoid it)
-- Configuring incomplete, errors occurred!
See also "/home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/FXdiv-download/CMakeFiles/CMakeOutput.log".
-- RUY is enabled.
-- Configuring incomplete, errors occurred!
See also "/home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/CMakeFiles/CMakeOutput.log".
See also "/home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/CMakeFiles/CMakeError.log".
CMake Warning at /home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/abseil-cpp/CMakeLists.txt:70 (message):
A future Abseil release will default ABSL_PROPAGATE_CXX_STD to ON for CMake
3.8 and up. We recommend enabling this option to ensure your project still
builds correctly.
CMake Error: CMake was unable to find a build program corresponding to "Ninja". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
No such file or directory
CMake Error: Generator: execution of make failed. Make command was: &&
CMake Error at /home/user/Desktop/official_stuff/tensorflow_src/tensorflow/lite/CMakeLists.txt:167 (add_subdirectory):
add_subdirectory given source
"/home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/pthreadpool-source"
which is not an existing directory.
CMake Error: CMake was unable to find a build program corresponding to "Ninja". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
No such file or directory
CMake Error: Generator: execution of make failed. Make command was: &&
CMake Error: CMake was unable to find a build program corresponding to "Ninja". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
No such file or directory
CMake Error: Generator: execution of make failed. Make command was: &&
CMake Error at /home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/xnnpack/CMakeLists.txt:844 (ADD_SUBDIRECTORY):
ADD_SUBDIRECTORY given source
"/home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/pthreadpool-source"
which is not an existing directory.
CMake Error at /home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/xnnpack/CMakeLists.txt:884 (ADD_SUBDIRECTORY):
ADD_SUBDIRECTORY given source
"/home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/FXdiv-source"
which is not an existing directory.
CMake Error at /home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/xnnpack/CMakeLists.txt:908 (ADD_SUBDIRECTORY):
ADD_SUBDIRECTORY given source
"/home/user/Desktop/native/examples/android/app/.cxx/Debug/5c1w1z3w/arm64-v8a/FP16-source"
which is not an existing directory.
What's the right way to approach this? Following the android build documentation on tflite's website causes a lot of problems.
Update:
Installing ninja fixed almost all my problems, the only error I have now is:
In file included from /home/user/Desktop/official_stuff/tensorflow_src/tensorflow/lite/python/interpreter_wrapper/python_error_reporter.cc:16:
/home/user/Desktop/official_stuff/tensorflow_src/tensorflow/lite/python/interpreter_wrapper/python_error_reporter.h:19:10: fatal error: 'Python.h' file not found
python3 is in fact installed on my system, I used it on a c code before.
Update: Adding this to top of my cmake solved the python issue:
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -I/usr/include/python3.9 -I/usr/include/python3.9 -Wno-unused-result -Wsign-compare -g -ffile-prefix-map=/build/python3.9-RNBry6/python3.9-3.9.2=. -specs=/usr/share/dpkg/no-pie-compile.specs -fstack-protector -Wformat -Werror=format-security -DNDEBUG -g -fwrapv -Wall")
Update:
Now I get:
In file included from /home/user/Desktop/SmartAlpha/official_stuff/tensorflow_src/tensorflow/lite/python/interpreter_wrapper/numpy.cc:17:
In file included from /home/user/Desktop/SmartAlpha/official_stuff/tensorflow_src/tensorflow/lite/python/interpreter_wrapper/numpy.h:49:
In file included from /usr/include/python3.9/Python.h:8:
/usr/include/python3.9/pyconfig.h:9:12: fatal error: 'aarch64-linux-gnu/python3.9/pyconfig.h' file not found

LAST EDIT: You seem to completely overlook what I'm trying to explain you the whole time about different architectures. Your phone is not running on the same cpu architecture as your desktop. Your desktop machine is most likely running on amd64, while your phone is most likely arm64 which is also known as Aarch64 (do you now see what the latest error means? - It can't find the appropriate packages for the correct architecture - you can see that from the path in the error message).
You installed the amd64 package by issuing sudo apt-get install python-dev not the arm64 package. Check this official debian wiki on how to use MultiArch packages
You need to:
Update your system so that it can download the packages for different architectures
And sudo apt-get install python-dev:arm64
EDIT: Regarding the error in the updated question, you are most likely missing python development packages. Since you are on Debian I've looked for a possible package of interested and this might be it:
python-dev, try to apt-get it for the correct architecture that you need and maybe it will resolve your issues.
Make sure that Ninja is installed. CMake is trying to use it - this confuses a lot of users as they most commonly use Makefiles and don't know that an alternative exists. I don't see you explicitly stating that you use CMake + Ninja and hence I mention it.
If you have Ninja installed then the issue is most likely caused by the fact that it can't resolve the path via just the executable name. Take a look at CMAKE_MAKE_PROGRAM to better understand what I mean.
If 2. is your issue then you can try and set the whole path to this CMAKE_MAKE_PROGRAM variable, i.e. set(CMAKE_MAKE_PROGRAM /absolute/path/to/bin/ninja) and see if resolves the issue.

Cross Compiling ghostscript for android, what host should I use?

Hi Guys I am using this tutorial to build ghostscript-9.19 to be able to use in my android application to convert eps document to pdf. It fails while configure. Here are the logs
checking whether to enable maintainer-specific portions of Makefiles...
no
checking for gcc... arm-linux-androideabi-gcc --
sysroot=/<path>/android-ndk-
r11c/platforms/android-17/arch-arm/
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in
`/<path>/ghostscript-9.19/tiff-config':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
configure: error: libtiff configure script failed
This is the build file I am running
#!/bin/sh
# Compiles ghostscript for Android
# Make sure you have NDK_ROOT defined in .bashrc or .bash_profile
INSTALL_DIR="`pwd`/app/jni/gs"
SRC_DIR="`pwd`/../ghostscript-9.19"
cd $SRC_DIR
export
PATH="/<path>/android-ndk-r11c/toolchains/arm-
linux-androideabi-4.9/prebuilt/darwin-x86_64/bin:$PATH"
export SYS_ROOT="/<path>/Android/android-ndk-
r11c/platforms/android-17/arch-arm/"
export CC="arm-linux-androideabi-gcc --sysroot=$SYS_ROOT"
export LD="arm-linux-androideabi-ld"
export AR="arm-linux-androideabi-ar"
export RANLIB="arm-linux-androideabi-ranlib"
export STRIP="arm-linux-androideabi-strip"
mkdir -p $INSTALL_DIR
./configure --host=arm-linux-androideabi --build=x86_64-apple-darwin
--prefix=$INSTALL_DIR LIBS="-lc -lgcc"
make PREFIX=$INSTALL_DIR
make install DESTDIR=$INSTALL_DIR
exit 0
I am using --host=arm-linux-androideabi. What host should i use? What do I need to change in ghostScript project to make compile in successfully?
Any help is highly appreciated.

Cross compiling Ghostscript is pretty involved, partly because the Ghostscript build relies on building and running interim tools (genarch, genconf, mkromfs and echogs) which, obviously, must be built with the native compiler, rather than the cross compiler.
I think the problem you are seeing is because the call to the libtiff configure doesn't pass on the required options.
You may be better served grabbing, and tweaking the two files (a makefile and a header) from this commit:
Makefile for Android MuPDF libgs.so
and tweaking it to match your requirements.
There is a basic guide of what to do for cross compiling at the bottom of this page:
Ghostscript FAQ
I have a "project" to improve support for cross compiling, but it is slow going at the moment.

How to cross-compile gperftools for android using crystax-NDK & autotools?

My final goal is to be able to profile native code (C++) in android environments using gperftools.
My environment/Tools:
ubuntu 14.04
crystax-ndk-10.2.1
gcc-4.8.4
gperftools-2.4
(1)
I followed through this to make a standalone toolchain for later use:
Cross compiling for arm using crystax NDK
command:
./build/tools/make-standalone-toolchain.sh --system=linux-x86_64 --toolchain=arm-linux-androideabi-4.8 --platform=android-8 --install-dir=$HOME/my-android-toolchain
(2)
Thankfully, I found a script that will simplify the ./configure work:
https://gist.github.com/nddrylliog/4688209
and just modified it a bit (put in gperftools-2.4 folder):
#!/bin/sh
export DEV_PREFIX=$HOME
export ANDROID_NDK=${DEV_PREFIX}/crystax-ndk-10.2.1/
export CROSS_COMPILE=arm-linux-androideabi
export ANDROID_PREFIX=$HOME/my-android-toolchain
export SYSROOT=${ANDROID_NDK}/platforms/android-8/arch-arm
export CROSS_PATH=${ANDROID_PREFIX}/bin/${CROSS_COMPILE}
export CPP=${CROSS_PATH}-cpp
export AR=${CROSS_PATH}-ar
export AS=${CROSS_PATH}-as
export NM=${CROSS_PATH}-nm
export CC=${CROSS_PATH}-gcc
export CXX=${CROSS_PATH}-g++
export LD=${CROSS_PATH}-ld
export RANLIB=${CROSS_PATH}-ranlib
# export PREFIX=${DEV_PREFIX}/android/prefix
export PKG_CONFIG_PATH=${PREFIX}/lib/pkgconfig
export CFLAGS="${CFLAGS} --sysroot=${SYSROOT} -I${SYSROOT}/usr/include -I${ANDROID_PREFIX}/include -I${DEV_PREFIX}/android/bionic"
export CPPFLAGS="${CFLAGS}"
export LDFLAGS="${LDFLAGS} -L${SYSROOT}/usr/lib -L${ANDROID_PREFIX}/lib"
./configure --host=${CROSS_COMPILE} --with-sysroot=${SYSROOT} "$#"
(3)
And then I actually do the ./configure and make install:
I put this script in gperftools-2.4 folder and run it:
cd gperftools-2.4
./android_configure.sh --enable-frame-pointers --prefix=$(pwd)
sudo make && make install
cd ..
Result:
The above gives me this error:
src/static_vars.cc: In function 'void tcmalloc::SetupAtForkLocksHandler()':
src/static_vars.cc:119:39: error: 'pthread_atfork' was not declared in this scope
CentralCacheUnlockAll); // child calls after fork
I would appreciate if anyone could leave me some advice on this.
Extra:
I know there is a android-ndk-profiler but since I use CMake for the cross-compilation and I'm not quite sure how to mess with the Android.mk so at the moment I will try to use gperftools which works fine in linux build.

This is because pthread_atfork appeared in Android libc (Bionic) only from Android 5.0. In CrystaX NDK, not all API are replaced by libcrystax, in particular, all pthread_xxx API reside in libc. So the only way as of now to do what you want is either use android-21 as minimal platform, or modify gperftools sources, avoiding usage of pthread_atfork.
BTW, we're working on moving all pthread_xxx API into libcrystax, so I expect all such API will be available soon even for earlier Android versions.

Cross-Compiling GCC for ARM Android. Build Fails At GMP

I'm at the end of my rope on this one.
I'm new to Android development. I've read the GCC install documentation and parts of Embedded Android. I'm trying to cross-compile gcc 4.7 using an Android NDK toolchain built with the make-standalone-toolchain.sh script. I'm using the gcc and binutils source files from the NDK toolchain sources.
I copied the gcc-4.7 and binutils-2.23 into a directory gcc-src and created a 'build' directory alongside both, as follows:
gcc-src/gcc-4.7
gcc-src/binutils-2.23
gcc-src/build
I've symlinked the sources for
bfd,
gas,
gprof,
ld,
gprof
opcodes
from binutils to the gcc-4.7 source directory. I also ran the script in contrib/ that downloads the relevant sources for
gmp,
mpfr
mpc
and creates the appropriate symlinks
I've run configure with the (latest) following options:
sh ../gcc-4.7/configure --prefix=/usr/arm --disable-option-checking --host=arm-linux-eabi
--target=arm-linux-eabi --with-sysroot=/usr/sysroot --with-build-sysroot=/usr/sysroot --with-build-time-tools=/usr/bin --program-prefix=arm-
--disable-multilib --with-cpu=arm7 --enable-languages=c,c++,lto --disable-werror --disable-nls CC=arm-linux-androideabi-gcc GCC=arm-linux-androideabi-gcc
CFLAGS='-Wall -g -mfloat-abi=softfp -mbionic -mandroid -Wl,-lsupc++ -Wl,-lgnustl_shared'
CPPFLAGS='-Wall -g -mbionic -mandroid' LDFLAGS='-Wl,-lsupc++ -Wl,-lgnustl_shared' CXX=arm-linux-androideabi-g++
LD=arm-linux-androideabi-ld STRIP=arm-linux-androideabi-strip OBJDUMP=arm-linux-androideabi-objdump READELF=arm-linux-androideabi-readelf
AS=arm-linux-androideabi-as NM=arm-linux-androideabi-nm
LIBS='-lc -ldl -lm' CC_FOR_TARGET=arm-linux-androideabi-gcc CPP_FOR_TARGET=arm-linux-androideabi-gcc CXX_FOR_TARGET=arm-linux-androideabi-g++
GCC_FOR_TARGET=arm-linux-androideabi-gcc RANLIB_FOR_TARGET=arm-linux-androideabi-gcc-ranlib LD_FOR_TARGET=arm-linux-androideabi-ld
AS_FOR_TARGET=arm-linux-androideabi-as NM_FOR_TARGET=arm-linux-androideabi-gcc-nm AR_FOR_TARGET=arm-linux-androideabi-gcc-ar
READELF_FOR_TARGET=arm-linux-androideabi-readelf
OBJDUMP_FOR_TARGET=arm-linux-androideabi-objdump STRIP_FOR_TARGET=arm-linux-androideabi-strip
host_configargs=--with-headers=/usr/sysroot/usr/include target_configargs=/usr/sysroot/usr/include
When I run make -d...or make -d all-host...it constantly fails when it tries to compile gen-fac_ui.c because it can't find the includes stdio.h, stdint.h or string.h.
I'll add the exact error tomorrow after I re-set my build directory and start again, but I wanted to post the details and problem tonight before I pass out.
Any help...is greatly appreciated. I'm at a loss on this one.
QUICK NOTE: I noticed that the binutils src directory contains an include/ folder...I'll try symlinking that into the gcc src directory and running 'make distclean' then '../gcc-4.7/configure && make again.'
UPDATE: symlinking include/ did not fix the problem. Here's the error I'm continuously getting
make[2]: Entering directory `/project/android/tc-src/gcc/gcc-src/build/gmp'
gcc `test -f 'gen-fac_ui.c' || echo '../../gcc-4.7/gmp/'`gen-fac_ui.c -o gen-fac_ui
Putting child 0x007ddd30 (gen-fac_ui) PID 25531 on the chain.
Live child 0x007ddd30 (gen-fac_ui) PID 25531
../../gcc-4.7/gmp/gen-fac_ui.c:20:19: error: stdio.h: No such file or directory
../../gcc-4.7/gmp/gen-fac_ui.c:21:20: error: stdlib.h: No such file or directory
In file included from ../../gcc-4.7/gmp/gen-fac_ui.c:23:
../../gcc-4.7/gmp/dumbmp.c:42:20: error: string.h: No such file or directory
In file included from ../../gcc-4.7/gmp/gen-fac_ui.c:23:

I successfully compiled gen-fac_ui by doing the following:
Uninstalling the build gcc which is not (I think) needed as I'm using the cross-compiler toolchain generated by the make-standalone-toolchain.sh script from the Android NDK
Configuring the appropriate variables to set up the cross-compiler tools as the BUILD tools.
I have a different problem now, which I'll post in a different question. Basically, while gen-fac_ui compiles, it (of course) won't run.

Building FIPS module for android

I am working on an android project that requires the cryptographic libraries that are present in the application to be FIPS certified. To my knowledge there are no FIPS validated JAVA security libraries. Boucy Castle is good but its not validated. After reading some forum posts, I found out that OpenSSL's FIPS module can be used with the help of NDK.
Right now I am trying to build the fips-openssl module for Android, to do that I have created a script for the environment variables for cross compiling.
I am using openssl-fips, and ndk-r8 for this project. I followed the fips guideline I found on google. I hope this gives a clear picture of what I am trying to do.
#! /bin/sh
export ANDROID_NDK="~/Android/android-ndk-r8"
export FIPS_SIG="${ANDROID_NDK}/incore"
export GCC_C1="/usr/lib/gcc/i686-pc-linux-gnu/4.7.0/"
export PATH=$PATH:"${ANDROID_NDK}/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin";
export MACHINE=armv71
export ARCH=arm.
export CROSS_COMPILE="arm-linux-androideabi-"
export SYSTEM=android
#export RELEASE=2.6.32.GMU
export ANDROID_DEV="$ANDROID_NDK/platforms/android-14/arch-arm/usr"
export HOSTCC=/usr/bin/gcc
when doing the make this is the error that i get.
arm-linux-androideabi-gcc: error trying to exec 'cc1': execvp: No such file or directory
make[1]: *** [cryptlib.o] Error 1
make[1]: Leaving directory `/home/abhiram/fips/openssl-fips-1.2.3/crypto'
make: *** [build_crypto] Error 1
When i do a "find", the cc1 executable is present in this specific directory.
find . -name cc1
./toolchains/mipsel-linux-android-4.4.3/prebuilt/linux-x86/libexec/gcc/mipsel-linux-android/4.4.3/cc1
./toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/libexec/gcc/arm-linux-androideabi/4.4.3/cc1
./toolchains/x86-4.4.3/prebuilt/linux-x86/libexec/gcc/i686-android-linux/4.4.3/cc1

Looks like the problem is in the export statement, there is a blank space where a dash should be in the PATH line. Change this:
export PATH=$PATH:"${ANDROID_NDK}/toolchains/arm-linux-androideabi 4.4.3/prebuilt/linux-x86/bin";
to this:
export PATH=$PATH:"${ANDROID_NDK}/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin";
Also, your find shows that the cc1 executable is not in the path, so add its location to the path export as well:
export PATH=$PATH:"${ANDROID_NDK}/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin":"${ANDROID_NDK}/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/libexec/gcc/arm-linux-androideabi/4.4.3/";

Right now I am trying to build the fips-openssl module for Android, to do that I have created a script for the environment variables for cross compiling.
OpenSSL provides a script for Android, if you are interested. You can find it on the OpenSSL wiki: FIPS Library and Android.
when doing the make this is the error that i get:
arm-linux-androideabi-gcc: error trying to exec 'cc1'
It looks like your PATH does not include the cross-compile toolchain.
How are you invoking the script? You need to include a leading dot (".") to ensure the changes are applied to the current shell (and not the sub-shell that executes the script (which simply exits)).
Here' the first step of OpenSSL's build procedures for Android located at FIPS Library and Android. Notice the leading dot:
$ . .setenv-android.sh
The results of running the script set a bunch of variables used by the OpenSSL build system:
$ . ./setenv-android.sh
ANDROID_NDK_ROOT: /opt/android-ndk-r9
ANDROID_EABI: arm-linux-androideabi-4.6
ANDROID_API: android-14
ANDROID_SYSROOT: /opt/android-ndk-r9/platforms/android-14/arch-arm
ANDROID_TOOLCHAIN: /opt/android-ndk-r9/toolchains/arm-linux-androideabi-4.6/prebuilt/darwin-x86_64/bin
FIPS_SIG:
CROSS_COMPILE: arm-linux-androideabi-
ANDROID_DEV: /opt/android-ndk-r9/platforms/android-14/arch-arm/usr
"${ANDROID_NDK}/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/libexec/gcc/arm-linux-androideabi/4.4.3/"
I don't believe this is needed.
export ANDROID_NDK="~/Android/android-ndk-r8"
According to the folks on the Android NDK user list, you should set both ANDROID_NDK_ROOT and ANDROID_SDK_ROOT. The various NDK and SDK tools use those environmental variables. I suppose the SDK value would be "~/Android/android-sdk" for your installation.
See Recommended NDK Directory? for details.
I also think you should be using ANDROID_SYSROOT. Its not used by the NDK or SDK tools; rather, its used by OpenSSL and passed as sysroot during compile.