Following is the code snippet which I am using in my project to schedule a task
mTimer = new Timer();
mTimer.schedule(new TimerTask() {
#Override
public void run() {
//Do Something
}
}, interval, interval);
This works fine. I get event after mentioned interval. But this fails to send any event if date is set smaller than current from settings.
Does any one know why this behavior is happening?
Timer fails when you change the system clock because it's based on System.currentTimeMillis(), which is not monotonic.
Timer is not an Android class. It's a Java class that exists in the Android API to support existing non-Android libraries. It's almost always a bad idea to use a Timer in your new Android code. Use a Handler for timed events that occur within the lifetime of your app's activities or services. Handler is based on SystemClock.uptimeMillis(), which is monotonic. Use an Alarm for timed events that should occur even if your app is not running.
Use this code.. this will help you..
Timer t;
seconds = 10;
public void startTimer() {
t = new Timer();
//Set the schedule function and rate
t.scheduleAtFixedRate(new TimerTask() {
#Override
public void run() {
runOnUiThread(new Runnable() {
#Override
public void run() {
if (seconds == 0) {
t.cancel();
seconds = 10;
// DO SOMETHING HERE AFTER 10 SECONDS
Toast.makeText(this,"Time up",Toast.LENGTH_SHORT).show();
}
seconds -= 1;
}
});
}
}, 0, 1000);
}
Related
We have an app who should process a task every 10 seconds. This should be more or less exact, which means that a difference of 1 or 2 seconds is OK, but not gaps of 20 seconds or more.
This should work regardless if the app is open, in foreground or in background.
We implement this via AlarmManager, but it is not working properly. If the smartphone is not plugged in and it is running in background, there are gaps in the execution.
With Android 4.3., we have gaps (about 30 seconds) from time to time, with Android 5.x we have fewer gaps, but gaps about 5 or 10 minutes long!
I think there must be a way to implement this, an alarm clock is also possible and is exact.
More about the app: It works in a service and a broadcast receiver is implemented. This means the service is restarted if I wipe away the app or restart the handy. This works correctly. The only problem is the 10 second task.
Any hints? How is an alarm clock implemented? Which calls, API?
I tried different ways until now without success.
Thanks
Hans
public void callAsynchronousTask() {
final Handler handler = new Handler();
Timer timer = new Timer();
TimerTask doAsynchronousTask = new TimerTask() {
#Override
public void run() {
handler.post(new Runnable() {
public void run() {
try {
PerformBackgroundTask performBackgroundTask = new PerformBackgroundTask();
// PerformBackgroundTask this class is the class that extends AsynchTask
performBackgroundTask.execute();
} catch (Exception e) {
// TODO Auto-generated catch block
}
}
});
}
};
timer.schedule(doAsynchronousTask, 0, 10000); //execute in every 10000 ms
}
You can do it with handler and runnable, which I think is preferred by Android..
public class ActivityMain extends Activity
{
private Handler mainHandler = new Handler();
private Runnable backgroundTask = new Runnable() {
#Override
public void run() {
//do your background task
mainHandler.postDelayed(this, 10000);
}
};
#Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
mainHandler.postDelayed(backgroundTask, 10000);
}
}
Use of "AlarmManager" with "broadcast Receiver" and "service". These 3 component will make your requirement fulfill.
Using Alarm Manager to generate a Broadcast Receiver, and from BroadcastReceiver start a Service where you can put your desired code of logic to get your task done in every 10 Seconds.
public void scheduleAtFixedRate (TimerTask task, long delay, long period). This looks promising but i have no idea how to use it. Any help would be appreciated.It was on android developer site.
Maybe this demo helps you:
import java.util.*;
public class TimerDemo {
public static void main(String[] args) {
TimerTask tasknew = new TimerScheduleFixedRateDelay();
Timer timer = new Timer();
timer.scheduleAtFixedRate(tasknew, 500, 1000);
}
public void run() {
System.out.println("working at fixed rate delay");
}
}
You need to have a method called "run" in your class, that will be repeately executed.
Source.
You can create a timer task and schedule it at a fixed rate like this:
Timer timer = new Timer();
TimerTask task = new TimerTask() {
#Override
public void run() {
// This method is called in a fixed interval
}
};
timer.scheduleAtFixedRate(task, delay, period);
If you need to interact with the UI in the TimerTask you should do it like this:
TimerTask task = new TimerTask() {
#Override
public void run() {
runOnUiThread(new Runnable() {
#Override
public void run() {
// Interact with UI here
}
});
}
};
public void scheduleAtFixedRate(TimerTask task,
long delay,
long period)
Android doc here.
Parameters:
task - task to be scheduled.
delay - delay in milliseconds before task is to be executed.
period - time in milliseconds between successive task executions.
The task (TimerTask) is the code which will be executed forever, every period milliseconds. Delay is the time (in ms or Date if you want) which the Timer should wait until the start of the TimerTask.
You should remember Timer will run in a different thread from UI thread, so if you need to update the UI you should use runOnUiThread etc. (See Xaver Kapeller answer)
It could be an example
TimerTask tasknew = new TimerTask()
{
#Override
public void run()
{
/* Something here */
}
};
Timer timer = new Timer();
timer.scheduleAtFixedRate(tasknew, 500, 1000);
I noticed here everyone just posted an example so it's just an extension with an explanation.
I have this method
public void GetSMS(){
//in this method I read SMS in my app inbox,
//If have new SMS create notification
}
for this I think create timer tick method and every 5 sec call GetSMS()
How can I create a correct method for that ?
Here is an example of Timer and Timer Task. Hope this helps.
final Handler handler = new Handler();
Timer timer = new Timer(false);
TimerTask timerTask = new TimerTask() {
#Override
public void run() {
handler.post(new Runnable() {
#Override
public void run() {
// Do whatever you want
}
});
}
};
timer.schedule(timerTask, 1000); // 1000 = 1 second.
Maybe with a timer and a timertask?
See javadocs:
http://docs.oracle.com/javase/1.4.2/docs/api/java/util/Timer.html
Yet receiving broadcasts is probably a more solid solution.
See: Android - SMS Broadcast receiver
Use Timer.scheduleAtFixedRate() as follow:
final Handler handler = new Handler();
Timer timer = new Timer(false);
TimerTask timerTask = new TimerTask() {
#Override
public void run() {
handler.post(new Runnable() {
#Override
public void run() {
GetSMS();
}
});
}
};
timer.scheduleAtFixedRate(timerTask, 5000, 5000); // every 5 seconds.
I saw it by accident.. This is not the right way to do it..
You don't need to check if there is a sms that received. Android provide broadcast receiver to get notified when sms is income.
Here you go, you have the link here.. Copy paste and it will work great
http://androidexample.com/Incomming_SMS_Broadcast_Receiver_-_Android_Example/index.php?view=article_discription&aid=62&aaid=87
Hope that this make sense
Although the above timer methods are the correct way to use timers of the sort you are after, I quite like this little hack:
new CountDownTimer(Long.MAX_VALUE, 5000)
{
public void onTick(long millisUntilFinished)
{
// do something every 5 seconds...
}
public void onFinish()
{
// finish off when we're all dead !
}
}.start();
Long.MAX_VALUE has, according the Java docs, a (signed) value of 2^63-1, which is around 292471 millennia ! So starting up one of these countdown timers effectively lasts forever relatively speaking. Of course this depends on your interval time. If you want a timer every 1 second the timer would "only" last 58494 millenia, but we don't need to worry about that in the grander scheme of things.
First of all, I could not even chose the method to use, i'm reading for hours now and someone says use 'Handlers', someone says use 'Timer'. Here's what I try to achieve:
At preferences, theres a setting(checkbox) which to enable / disable the repeating job. As that checkbox is checked, the timer should start to work and the thread should be executed every x seconds. As checkbox is unchecked, timer should stop.
Here's my code:
Checking whether if checkbox is checked or not, if checked 'refreshAllServers' void will be executed which does the job with timer.
boolean CheckboxPreference = prefs.getBoolean("checkboxPref", true);
if(CheckboxPreference == true) {
Main main = new Main();
main.refreshAllServers("start");
} else {
Main main = new Main();
main.refreshAllServers("stop");
}
The refreshAllServers void that does the timer job:
public void refreshAllServers(String start) {
if(start == "start") {
// Start the timer which will repeatingly execute the thread
} else {
// stop the timer
}
And here's how I execute my thread: (Works well without timer)
Thread myThread = new MyThread(-5);
myThread.start();
What I tried?
I tried any example I could see from Google (handlers, timer) none of them worked, I managed to start the timer once but stoping it did not work.
The simpliest & understandable code I saw in my research was this:
new java.util.Timer().schedule(
new java.util.TimerTask() {
#Override
public void run() {
// your code here
}
},
5000
);
Just simply use below snippet
private final Handler handler = new Handler();
private Runnable runnable = new Runnable() {
public void run() {
//
// Do the stuff
//
handler.postDelayed(this, 1000);
}
};
runnable.run();
To stop it use
handler.removeCallbacks(runnable);
Should do the trick.
Use a CountDownTimer. The way it works is it will call a method on each tick of the timer, and another method when the timer ends. At which point you can restart if needed. Also I think you should probably be kicking off AsyncTask rather than threads. Please don't try to manage your own threads in Android. Try as below. Its runs like a clock.
CountDownTimer myCountdownTimer = new CountDownTimer(30000, 1000) {
public void onTick(long millisUntilFinished) {
mTextField.setText("seconds remaining: " + millisUntilFinished / 1000);
// Kick off your AsyncTask here.
}
public void onFinish() {
mTextField.setText("done!");
// the 30 seconds is up now so do make any checks you need here.
}
}.start();
I would think to use AlarmManager http://developer.android.com/reference/android/app/AlarmManager.html
If checkbox is on call method where
AlarmManager alarmManager = (AlarmManager)SecureDocApplication.getContext()
.getSystemService(Context.ALARM_SERVICE);
PendingIntent myService = PendingIntent.getService(context, 0,
new Intent(context, MyService.class), 0);
long triggerAtTime = 1000;
alarmManager.setRepeating(AlarmManager.RTC_WAKEUP, triggerAtTime, 5000 /* 5 sec*/,
myService);
If checkbox is off cancel alarm manager
alarmManager.cancel(myService);
"[ScheduledThreadPoolExecutor] class is preferable to Timer when multiple worker threads are needed, or when the additional flexibility or capabilities of ThreadPoolExecutor (which this class extends) are required."
per...
https://docs.oracle.com/javase/7/docs/api/java/util/concurrent/ScheduledThreadPoolExecutor.html
It's not much more than the handler, but has the option of running exactly every so often (vice a delay after each computation completion).
import java.util.concurrent.ScheduledThreadPoolExecutor;
import java.util.concurrent.TimeUnit;
...
final int THREAD_POOL_SIZE = 10;
final int START_DELAY = 0;
final int TIME_PERIOD = 5;
final TimeUnit TIME_UNIT = TimeUnit.SECONDS;
ScheduledThreadPoolExecutor pool;
Runnable myPeriodicThread = new Runnable() {
#Override
public void run() {
refreshAllServers();
}
};
public void startTimer(){
pool.scheduleAtFixedRate(myPeriodicThread,
START_DELAY,
TIME_PERIOD,
TIME_UNIT);
}
public void stopTimer(){
pool.shutdownNow();
}
Thanks to everyone, I fixed this issue with using Timer.
timer = new Timer();
timer.scheduleAtFixedRate(
new java.util.TimerTask() {
#Override
public void run() {
for (int i = 0; i < server_amount; i++) {
servers[i] = "Updating...";
handler.sendEmptyMessage(0);
new MyThread(i).start();
}
}
},
2000, 5000);
On button click I want to begin a timer of 5 minutes and then execute a method that will check for certain conditions and set off alerts if conditions are right. I've seen examples with timers and postDelay, but don't really understand why one would use one vs another. What is the best way to accomplish what I am trying to do? I don't want to lock up the UI during the 5 minutes. The user should be free to use the app as normal during the countdown.
EDIT: I am trying the postDelayed suggestion but visual studio is not liking something about my code. It looks exactly like examples I've found. My be a mono for android thing.
Handler h = new Handler();
Runnable r = new Runnable(){
public void run()
{
Dialog d = inst2.showBuilder(this, "test", "test");
d.Show();
}
};
h.postDelayed(r, 5000);
Specifically the code block inside of run throws all kinds of "} expected" and "a namespace cannot directly contain members such as fields or methods" exceptions.
Try using Timer Object :
Timer mTimer = new Timer();
mTimer.schedule(new TimerTask()
{
#Override
public void run()
{
// Your code goes here
}
}, 1000); // 1sec
final Handler handler = new Handler();
Timer timer = new Timer();
timer.schedule(new TimerTask()
{
#Override
public void run()
{
handler.post(new Runnable()
{
public void run()
{
// YOUR Code
}
});
}
}, 1000); // 1sec
You can start a simple Thread that will sleep in background for 5 minutes and then call a function. While the thread sleeps in background the UI will not freeze. When the thread finish executing what you want you can set off alerts by sending some intents as notifications and receive them in some Broadcast Receivers.
Hope this helps
Use Handler.postDelayed(Runnable block); method to execute delay, as android also not recommend to use timer.
Handler h = new Handler();
Action myAction = () =>
{
// your code that you want to delay here
};
h.PostDelayed(myAction, 1000);